Chemistry High School

write the balance chemical equation and identify the reaction type
Write the balance chemical equation and identify the reaction type 1: sodium bicarbonate \( + \) acetic acid \( \rightarrow \) sodium acetate \( + \) carbonic acid carbonic acid \( \rightarrow \) carb

Answers

Answer 1

NaHCO3 + CH3COOH ⇒ CH3COONa + H2CO3,

it is a double displacement reaction (acid-base reaction)

In the given reaction, sodium bicarbonate (NaHCO3) reacts with acetic acid (CH3COOH) to produce sodium acetate (CH3COONa) and carbonic acid (H2CO3). To balance the equation, we need to ensure that the number of atoms of each element is equal on both sides. The balanced equation shows that one molecule of sodium bicarbonate reacts with one molecule of acetic acid to produce one molecule of sodium acetate and one molecule of carbonic acid. This balancing ensures that the number of atoms of each element (Na, H, C, O) is the same on both sides of the equation. The reaction type is identified as a double displacement reaction because the positive ions (Na+ and H+) and the negative ions (HCO3- and CH3COO-) exchange places to form the products. In this case, sodium from sodium bicarbonate replaces the hydrogen ion from acetic acid, forming sodium acetate. Simultaneously, the bicarbonate ion combines with the hydrogen ion from acetic acid to form carbonic acid. Overall, the reaction between sodium bicarbonate and acetic acid is a double displacement reaction, precisely an acid-base reaction.

To learn more about acid-base reaction

brainly.com/question/3911136

#SPJ11

Related Questions

Question 12 of 24 Submit What is the correct common name for the compound shown here? methyl iso propyl ether ether

Answers

The correct common name for the compound shown below is Methyl isopropyl ether. So, the option "methyl iso propyl ether" is correct.

Common names are not standardized names, and they may differ from one place to another. The IUPAC (International Union of Pure and Applied Chemistry) system is the standard way of naming chemical compounds. UPAC is best known for its works standardizing nomenclature in chemistry, but IUPAC has publications in many science fields including chemistry, biology and physics.  Some important work IUPAC has done in these fields includes standardizing nucleotide base sequence code names; publishing books for environmental scientists, chemists, and physicists; and improving education in science  The names can be long, but they are precise and identify the chemical compound exactly. The IUPAC name for the compound shown below is  1-methoxy-2-methylpropane or alternatively methyl 2-methoxypropane.

To know more about  IUPAC, visit:

https://brainly.com/question/16631447

#SPJ11

Provide the key fragment structures of the mass spectrometry
data. The possible molecular formula is:
C5H9O2Br
Relative Intensity 100 80 40 20- o fim 20 40 60 80 Titr 100 120 m/z 140 160 180 200 15.0 28.0 37.0 38.0 39.0 42.0 43.0 49.0 50.0 51.0 52.0 61.0 62.0 63.0 73.0 74.0 75.0 76.0 77.0 89.0 90.0 91.0 91.5 1

Answers

Mass spectrometry is a scientific technique used for the identification of unknown compounds, determination of isotopic composition, and determination of the structure of compounds, among others. The fragments generated in mass spectrometry can help in determining the molecular formula of the compound. In this case, the key fragment structures of the mass spectrometry data with a possible molecular formula of C5H9O2Br are as follows:

15.0, 28.0, 37.0, 38.0, 39.0, 42.0, 43.0, 49.0, 50.0, 51.0, 52.0, 61.0, 62.0, 63.0, 73.0, 74.0, 75.0, 76.0, 77.0, 89.0, 90.0, 91.0, 91.5

The relative intensity of each of the fragments is also given as 100, 80, 40, 20, and so on. The relative intensity of each fragment provides information about the abundance of that fragment in the sample.

The molecular formula C5H9O2Br indicates that the compound has 5 carbon atoms, 9 hydrogen atoms, 2 oxygen atoms, and 1 bromine atom. By analyzing the fragment structures and their relative intensity, we can propose the following possible fragment structures:

- 15.0: CH3O2Br
- 28.0: C2H5Br
- 37.0: C2H5O2
- 38.0: C2H6Br
- 39.0: C2H6O
- 42.0: C3H5OBr
- 43.0: C3H5O
- 49.0: C4H9Br
- 50.0: C4H10O2
- 51.0: C4H9O2Br
- 52.0: C4H10O
- 61.0: C5H9O
- 62.0: C5H10Br
- 63.0: C5H10O
- 73.0: C5H9BrO2
- 74.0: C5H10O2Br
- 75.0: C5H9O2
- 76.0: C5H10BrO
- 77.0: C5H9BrO
- 89.0: C5H9BrO2
- 90.0: C5H10O2Br
- 91.0: C5H9O2Br
- 91.5: C5H10BrO

To know more about Mass spectrometry visit:

https://brainly.com/question/5020187

#SPJ11

QUESTION 7 What is the pH of water? O pH12 O pH9 O pH7 O pH5 QUESTION 8 What is the pH when fish die from pollution? O pH12 O pH9 O pH7 O pH4 QUESTION 9 A solution with a pH less than 7 is basic. O True O False

Answers

7. The pH of water is pH7.

The pH scale measures the acidity or alkalinity of a substance. It ranges from 0 to 14, with pH7 considered neutral. Water has a pH of 7, indicating that it is neither acidic nor basic. It is important to note that the pH of pure water can vary slightly due to the presence of dissolved gases and minerals, but it generally remains close to pH7.

8. When fish die from pollution, the pH is typically around pH4.

Pollution can introduce harmful substances into water bodies, leading to a decrease in pH. Acidic pollutants, such as sulfur dioxide and nitrogen oxides, can cause the pH of water to drop significantly. When fish are exposed to highly acidic water, their physiological processes are disrupted, and they may die as a result. A pH of around pH4 is considered highly acidic and can be detrimental to aquatic life.

9. A solution with a pH less than 7 is acidic.

This statement is false. A solution with a pH less than 7 is actually considered acidic, not basic. The pH scale ranges from 0 to 14, with pH7 being neutral. Solutions with a pH below 7 are acidic, indicating a higher concentration of hydrogen ions (H+) in the solution. On the other hand, solutions with a pH above 7 are basic or alkaline, indicating a higher concentration of hydroxide ions (OH-) in the solution.

To know more about Pollutants visit-

brainly.com/question/29594757

#SPJ11

Select the following terms to describe the relative concentrations of the molecules listed below if TAC cycle is completely inactive: assuming there is no electron shuttle and no other metabolic ways involved. 00 [mitochondrial FADH2] [cytosolic NADH] [pyruvate] [mitochondrial ATP] Acetyl-CoA [mitochondrial ADP] 1. Normal 2. Higher than normal 3. Lower than normal 4. None

Answers

For the given relative concentrations of the molecule we have: option 1, Normal, option 2, Higher than normal, option 3, Lower than normal and option 4, None, is the correct answer.

Given terms are: [mitochondrial FADH2] [cytosolic NADH] [pyruvate] [mitochondrial ATP] Acetyl-CoA [mitochondrial ADP].

The relative concentrations of the molecules listed below if TAC cycle is completely inactive are:

None [mitochondrial FADH2][cytosolic NADH][pyruvate]Higher than normal [mitochondrial ATP]

Lower than normal Acetyl-CoA[mitochondrial ADP]

The TAC cycle is responsible for the production of high energy ATP molecules.

If the TAC cycle is inactive, then there will be no energy generated. Therefore, the concentration of mitochondrial ATP will be None, and the concentration of mitochondrial FADH2 and cytosolic NADH will be higher than normal.

However, without the TAC cycle, the concentration of Acetyl-CoA will be lower than normal and the concentration of mitochondrial ADP will also be lower than normal.

Thus, the relative concentrations of the molecules listed below if the TAC cycle is completely inactive will be: None [mitochondrial FADH2] [cytosolic NADH] [pyruvate]Higher than normal [mitochondrial ATP]

Lower than normal Acetyl-CoA[mitochondrial ADP].

Therefore, option 1, Normal, option 2, Higher than normal, option 3, Lower than normal and option 4, None, is the correct answer.

Learn more about molecule here:

https://brainly.com/question/32298217

#SPJ11

Other Questions
Suppose study looked at smoking (yes/no) as an exposure and CHD (yes/no) as outcome, and found a relative risk of 2.15. Which of the following is the correct interpretation of the RR? Smoking increases the risk of CHD by 2.15 The risk of CHD among smokers is 2.15 time the risk of non-smokers_ The risk among smokers is 2.15 higher than non-smokers_ The risk of CHD among non-smokers is half that of smokers The open-loop transfer function of a unit-negative-feedback system has the form ofG(s)H(s) = 1 / s(s+1).Please determine the following transient specifications when the reference input is a unit step function:(1) Percentage overshoot %;(2) Peak time tp;(3) 2% Settling time t. Nina and Ryan each ran at a constant speed for a 100-meter race. Each runners distance for the same section of the race is displayed on the left. Who had a head start, and how big was the head start? had a head start of meters. The end of the cylinder with outer diameter = 100 mm and inner diameter =30 mm and length = 150 mm will be machined using a CNC lathe machine with rotational speed =336 rotations per minute, feed rate = 0.25 mm/ rotation, and cutting depth = 2.0 mm. Machine mechanical efficiency =0.85 and specific energy for Aluminum = 0.7 Nm/m. Determine: i. Cutting time to complete face cutting operation (sec). ii. Material Removal Rate (mm/s). iii. Gross power used in the cutting process (Watts). Determine the design heating load for a residence, 30 by 100 by 10 ft (height), to be located in Windsor Locks, Connecticut (design indoor temperature is 72 F and 30% RH and outdoor temperature is 3 F and 100% RH), which has an uninsulated slab on grade concrete floor (F-0.84 Btu/ft). The construction consists of Walls: 4 in. face brick (R=0.17), % in plywood sheathing (R=0.93), 4 in. cellular glass insulation (R=12.12), and / in. plasterboard (R=0.45) Ceiling/roof: 3 in. lightweight concrete deck (R=0.42), built-up roofing (R=0.33), 2 in. of rigid, expanded rubber insulation (R=9.10), and a drop ceiling of 7 in, acoustical tiles (R=1.25), air gap between rubber insulation and acoustical tiles (R=1.22) Windows: 45% of each wall is double pane, nonoperable, metal-framed glass with 1/4 in, air gap (U-0.69) Doors: Two 3 ft by 7 A, 1.75 in. thick, solid wood doors are located in each wall (U-0.46) All R values are in hr ft F/Btu and U values are in Btu/hr ft F units. R=1/U. 1.Find the period of the following functions. a) f(t) = (7 cos t) b) f(t) = cos (2t/m) Homework: Homework 8.2 Compute the probability of event E if the odds in favor of E are 6 30 29 19 (B) 11 29 (D) 23 13 (A) P(E)=(Type the probability as a fraction Simplify, your answer) Considering the above scenario, the engineer should make a report/presentation explaining the process of design on different component and its manufacturing; finally, an integration as a complete system. (Process of VR design (constraints and criteria), components of manufacturing a fountain including audio system and lights display and any other auxiliary (fire-works display, multiple screen and advertising screens) .. Write a MATLAB m-file that includes a MATLAB function to find the root xr of a function fx using the Bisection Your code must follow the following specifications: Accept the function fx from the user. Accept the initial bracket guess from the user. Default values (to be used. if no values are specified by the user) for the bracket are -1 and 1. Accept stop criterion (approximate relative percent error, Ea) from the user. Default value is 0.001%. Accept the number of maximum number of iterations N (N = 200) from the user. Default value is N=50. This default vale is to be used if the user does not explicitly mention N. If N is reached and the stop criterion is not reached, print the message "Stop crtiterion not reached after N iterations. Exiting program." If stop criterion is reached, print the value of the estimated root and the corresponding Ea (in %) with an appropriate message. Test your program on an example function of your choice. Verify your answer against the solution obtained using another method ("roots" command or MS-Excel, etc.). Report both answers using a table. Use clear and concise comments in your code so that a reader can easily understand your program. Submit your program, a brief description of your approach, your observations, and conclusions. Note: Submit m-file as part of the PDF report and also separately as a .m file. Question 14 Not yet answered Marked out of 1.00 Flag question You suspect your patient is in shock. You note the patient's skin is pale. This is likely due to Select one: a. peripheral vasoconstriction O b. peripheral vasodilation O c. an increased heart rate O d. hypothermia Provide the key fragment structures of the mass spectrometrydata. The possible molecular formula is:C5H9O2BrRelative Intensity 100 80 40 20- o fim 20 40 60 80 Titr 100 120 m/z 140 160 180 200 15.0 28.0 37.0 38.0 39.0 42.0 43.0 49.0 50.0 51.0 52.0 61.0 62.0 63.0 73.0 74.0 75.0 76.0 77.0 89.0 90.0 91.0 91.5 1 Recombination mapping has been fundamental in studying the arrangement of loci along chromosomes. Which of the following statements about recombination mapping is NOT correct?A.Genome-wide association mapping can be combined with recombination mapping for better understanding of genetic bases of phenotypesB.It cannot be used for breeding of animalsC.Generation time is an important factor for its feasibilityD.It cannot be used for asexual organismsE.Measuring phenotypes is an important component Question 3 Which of the following statements is true of the male reproductive system? A The interstitial (Leydig) assist in sperm formation B The testes are temperature sensitive for optimal sperm pro Design a excel file of an hydropower turgo turbine in Sizing and Material selection.Excel file must calculate the velocity of the nozel, diameter of the nozel jet, nozzle angle, the runner size of the turgo turbine, turbine blade size, hub size, fastner, angular velocity,efficiency,generator selection,frequnecy,flowrate, head and etc.(Note: File must be in execl file with clearly formulars typed with all descriptions in the sheet) Which of the following is a risk factor in Endocarditis Infecciosa (IEC?a. dental manipulationsb. prosthetic heart valvesc. infectious diseasesd. congenital heart diseasee. intravenous drug addicts 1a) Explain the importance of feedback inhibition in metabolic processes such as glycolysis, pyruvate oxidation, citric acid cycle, Calvin cycle, etc. (Please use one process in your explanation to clarify your rationale.) 5 pts 1a.) 1b) What would occur in the cell if the enzyme that regulates the process you explained in 1a were to malfuction? In your explanation, be sure to mention the name of the enzyme and if there are any detrimental physiological effects, for example the development of a certain disorder or disease. 5 pts deposited uniformly on the Silicon(Si) substrate, which is 500um thick, at a temperature of 50C. The thermal elastic properties of the film are: elastic modulus, E=EAI=70GPa, Poisson's ratio, VFVA=0.33, and coefficient of thermal expansion, a FaA=23*10-6C. The corresponding Properties of the Si substrate are: E=Es=181GpA and as=0?i=3*10-6C. The film-substrate is stress free at the deposition temperature. Determine a) the thermal mismatch strain difference in thermal strain), of the film with respect to the substrate(ezubstrate e fim) at room temperature, that is, at 20C, b)the stress in the film due to temperature change, (the thickness of the thin film is much less than the thickness of the substrate) and c)the radius of curvature of the substrate (use Stoney formula) 4) Disc brakes are used on vehicles of various types (cars, trucks, motorcycles). The discs are mounted on wheel hubs and rotate with the wheels. When the brakes are applied, pads are pushed against the faces of the disc causing frictional heating. The energy is transferred to the disc and wheel hub through heat conduction raising its temperature. It is then heat transfer through conduction and radiation to the surroundings which prevents the disc (and pads) from overheating. If the combined rate of heat transfer is too low, the temperature of the disc and working pads will exceed working limits and brake fade or failure can occur. A car weighing 1200 kg has four disc brakes. The car travels at 100 km/h and is braked to rest in a period of 10 seconds. The dissipation of the kinetic energy can be assumed constant during the braking period. Approximately 80% of the heat transfer from the disc occurs by convection and radiation. If the surface area of each disc is 0.4 m and the combined convective and radiative heat transfer coefficient is 80 W/m K with ambient air conditions at 30C. Estimate the maximum disc temperature. Consider the transshipment costs per unit shipped below for this problem. Consider this distribution plan below. What is the total cost (dollars) associated with this distribution plan? (round to a whole number) Layout (cont.) Assume a faciity is setting us an assembly line and the tasks and times are listed above. Assume the desired cycle time is 15 minutes/unit. What is the theoretical minimum number of workstations required? (Round up to a whole number) Reaction of antigen with IgE antibodies attached to mast cells causes a. Complement fixation. b. Agglutination. c. Lysis of the cells. d. Release of chemical mediators. e. None of these