Determination of thermal mismatch strain difference Let's first write down the given values: Ea1 = 70 GP a (elastic modulus of film) Vf1 = 0.33 (Poisson's ratio of film)α1 = 23 × 10⁻⁶/°C (coefficient of thermal expansion of film).
Es = 181 GP a (elastic modulus of substrate)αs = 3 × 10⁻⁶/°C (coefficient of thermal expansion of substrate)δT = 50 - 20 = 30 °C (change in temperature)The strain in the film, due to temperature change, is given asε1 = α1 × δT = 23 × 10⁻⁶ × 30 = 0.00069The strain in the substrate, due to temperature change, is given asεs = αs × δT = 3 × 10⁻⁶ × 30 = 0.00009.
Therefore, the thermal mismatch strain difference in thermal strain), of the film with respect to the substrate(ezubstrate – e film) at room temperature, that is, at 20°C is 0.0006. Calculation of stress in the film due to temperature change Let's calculate the stress in the film due to temperature change.
To know more about Determination visit:
https://brainly.com/question/29898039
#SPJ11
A mesh of 4-node pyramidic elements (i.e. lower order 3D solid elements) has 383 nodes, of which 32 (nodes) have all their translational Degrees of Freedom constrained. How many Degrees of Freedom of this model are constrained?
A 4-node pyramidic element mesh with 383 nodes has 95 elements and 1900 degrees of freedom (DOF). 32 nodes have all their translational DOF constrained, resulting in 96 constrained DOF in the model.
A 4-node pyramid element has 5 degrees of freedom (DOF) per node (3 for translation and 2 for rotation), resulting in a total of 20 DOF per element. Therefore, the total number of DOF in the model is:
DOF_total = 20 * number_of_elements
To find the number of elements, we need to use the information about the number of nodes in the mesh. For a pyramid element, the number of nodes is given by:
number_of_nodes = 1 + 4 * number_of_elements
Substituting the given values, we get:
383 = 1 + 4 * number_of_elements
number_of_elements = 95
Therefore, the total number of DOF in the model is:
DOF_total = 20 * 95 = 1900
Out of these, 32 nodes have all their translational DOF constrained, which means that each of these nodes has 3 DOF that are constrained. Therefore, the total number of DOF that are constrained is:
DOF_constrained = 32 * 3 = 96
Therefore, the number of Degrees of Freedom of this model that are constrained is 96.
To know more about degrees of freedom, visit:
brainly.com/question/32093315
#SPJ11
4) Disc brakes are used on vehicles of various types (cars, trucks, motorcycles). The discs are mounted on wheel hubs and rotate with the wheels. When the brakes are applied, pads are pushed against the faces of the disc causing frictional heating. The energy is transferred to the disc and wheel hub through heat conduction raising its temperature. It is then heat transfer through conduction and radiation to the surroundings which prevents the disc (and pads) from overheating. If the combined rate of heat transfer is too low, the temperature of the disc and working pads will exceed working limits and brake fade or failure can occur. A car weighing 1200 kg has four disc brakes. The car travels at 100 km/h and is braked to rest in a period of 10 seconds. The dissipation of the kinetic energy can be assumed constant during the braking period. Approximately 80% of the heat transfer from the disc occurs by convection and radiation. If the surface area of each disc is 0.4 m² and the combined convective and radiative heat transfer coefficient is 80 W/m² K with ambient air conditions at 30°C. Estimate the maximum disc temperature.
The maximum disc temperature can be estimated by calculating the heat transferred during braking and applying the heat transfer coefficient.
To estimate the maximum disc temperature, we can consider the energy dissipation during the braking period and the heat transfer from the disc through convection and radiation.
Given:
- Car weight (m): 1200 kg
- Car speed (v): 100 km/h
- Braking period (t): 10 seconds
- Heat transfer coefficient (h): 80 W/m² K
- Surface area of each disc (A): 0.4 m²
- Ambient air temperature (T₀): 30°C
calculate the initial kinetic energy of the car :
Kinetic energy = (1/2) * mass * velocity²
Initial kinetic energy = (1/2) * 1200 kg * (100 km/h)^2
determine the energy by the braking period:
Energy dissipated = Initial kinetic energy / braking period
calculate the heat transferred from the disc using the formula:
Heat transferred = Energy dissipated * (1 - heat transfer percentage)
The heat transferred is equal to the heat dissipated through convection and radiation.
Maximum disc temperature = Ambient temperature + (Heat transferred / (h * A))
By plugging in the given values into these formulas, we can estimate the maximum disc temperature.
Learn more about temperature here:
https://brainly.com/question/11384928
#SPJ11
Considering the above scenario, the engineer should make a report/presentation explaining the process of design on different component and its manufacturing; finally, an integration as a complete system. (Process of VR design (constraints and criteria), components of manufacturing a fountain including audio system and lights display and any other auxiliary (fire-works display, multiple screen and advertising screens)
For the process of VR design, the engineer should start by considering the constraints and criteria. The engineer should first consider the specific requirements of the client in terms of the design of the fountain. The constraints may include the size of the fountain, the materials that will be used, and the budget that the client has allocated for the project.
After considering the constraints and criteria, the engineer should start designing the fountain using virtual reality technology. Virtual reality technology allows engineers to design complex systems such as fountains with great accuracy and attention to detail. The engineer should be able to create a virtual model of the fountain that incorporates all the components that will be used in its manufacture, including the audio system and the lights display.
Once the design is complete, the engineer should then proceed to manufacture the fountain. The manufacturing process will depend on the materials that have been chosen for the fountain. The engineer should ensure that all the components are of high quality and meet the specifications of the client.
Finally, the engineer should integrate all the components to create a complete system. This will involve connecting the audio system, the lights display, and any other auxiliary components such as fireworks displays and multiple screens. The engineer should also ensure that the fountain meets all safety and regulatory requirements.
In conclusion, the engineer should prepare a report or presentation that explains the process of designing and manufacturing the fountain, including all the components and the integration process. The report should also highlight any challenges that were encountered during the project and how they were overcome. The engineer should also provide recommendations for future improvements to the design and manufacturing process.
To know more about engineer visit:
https://brainly.com/question/33162700
#SPJ11
Design a excel file of an hydropower turgo turbine in Sizing and Material selection.
Excel file must calculate the velocity of the nozel, diameter of the nozel jet, nozzle angle, the runner size of the turgo turbine, turbine blade size, hub size, fastner, angular velocity,efficiency,generator selection,frequnecy,flowrate, head and etc.
(Note: File must be in execl file with clearly formulars typed with all descriptions in the sheet)
Designing an excel file for a hydropower turbine (Turgo turbine) involves calculating different values that are essential for its operation. These values include the velocity of the nozzle, diameter of the nozzle jet, nozzle angle, runner size of the turbine, turbine blade size, hub size, fastener, angular velocity, efficiency, generator selection, frequency, flow rate, head, etc.
To create an excel file for a hydropower turbine, follow these steps:Step 1: Open Microsoft Excel and create a new workbook.Step 2: Add different sheets to the workbook. One sheet can be used for calculations, while the others can be used for data input, output, and charts.Step 3: On the calculation sheet, enter the formulas for calculating different values. For instance, the formula for calculating the velocity of the nozzle can be given as:V = (2 * g * H) / (√(1 - sin²(θ / 2)))Where V is the velocity of the nozzle, g is the acceleration due to gravity, H is the head, θ is the nozzle angle.Step 4: After entering the formula, label each column and row accordingly. For example, the velocity of the nozzle formula can be labeled under column A and given a name, such as "Nozzle Velocity Formula".Step 5: Add a description for each formula entered in the sheet.
The explanation should be clear, concise, and easy to understand. For example, a description for the nozzle velocity formula can be given as: "This formula is used to calculate the velocity of the nozzle in a hydropower turbine. It takes into account the head, nozzle angle, and acceleration due to gravity."Step 6: Repeat the same process for other values that need to be calculated. For example, the formula for calculating the diameter of the nozzle jet can be given as:d = (Q / V) * 4 / πWhere d is the diameter of the nozzle jet, Q is the flow rate, and V is the velocity of the nozzle. The formula should be labeled, given a name, and described accordingly.Step 7: Once all the formulas have been entered, use the data input sheet to enter the required data for calculation. For example, the data input sheet can contain fields for flow rate, head, nozzle angle, etc.Step 8: Finally, use the data output sheet to display the calculated values. You can also use charts to display the data graphically. For instance, you can use a pie chart to display the percentage efficiency of the turbine. All the sheets should be linked correctly to ensure that the data input reflects on the calculation sheet and output sheet.
To know more about turbines visit:
https://brainly.com/question/25105919
#SPJ11
a) (10 pts). Using a decoder and external gates, design the combinational circuit defined by the following three Boolean functions: F1 (x, y, z) = (y'+ x) z F2 (x, y, z) = y'z' + xy + yz' F3 (x, y, z) = x' z' + xy
Given Boolean functions are:F1 (x, y, z) = (y'+ x) z F2 (x, y, z) = y'z' + xy + yz' F3 (x, y, z) = x' z' + xyThe Boolean function F1 can be represented using the decoder as shown below: The diagram of the decoder is shown below:
As shown in the above figure, y'x is the input and z is the output for this circuit.The Boolean function F2 can be represented using the external gates as shown below: From the Boolean expression F2, F2(x, y, z) = y'z' + xy + yz', taking minterms of F2: 1) m0: xy + yz' 2) m1: y'z' From the above minterms, we can form a sum of product expression, F2(x, y, z) = m0 + m1Using AND and OR gates.
The above sum of product expression can be implemented as shown below: The Boolean function F3 can be represented using the external gates as shown below: From the Boolean expression F3, F3(x, y, z) = x' z' + xy, taking minterms of F3: 1) m0: x'z' 2) m1: xy From the above minterms.
To know more about Boolean visit:
https://brainly.com/question/27892600
#SPJ11
Compute the Fourier Series decomposition of a square waveform with 90% duty cycle
The Fourier series decomposition of the square waveform with a 90% duty cycle is given by: f(t) = (a0/2) + ∑[(an * cos((2πnt)/T)) + (bn * sin((2πnt)/T))]
The Fourier series decomposition for a square waveform with a 90% duty cycle:
Definition of the Square Waveform:
The square waveform with a 90% duty cycle is defined as follows:
For 0 ≤ t < T0.9 (90% of the period), the waveform is equal to +1.
For T0.9 ≤ t < T (10% of the period), the waveform is equal to -1.
Here, T represents the period of the waveform.
Fourier Series Coefficients:
The Fourier series coefficients for this waveform can be computed using the following formulas:
a0 = (1/T) ∫[0 to T] f(t) dt
an = (2/T) ∫[0 to T] f(t) cos((2πnt)/T) dt
bn = (2/T) ∫[0 to T] f(t) sin((2πnt)/T) dt
where a0, an, and bn are the Fourier coefficients.
Computation of Fourier Coefficients:
For the given square waveform with a 90% duty cycle, we have:
a0 = (1/T) ∫[0 to T] f(t) dt = 0 (since the waveform is symmetric around 0)
an = 0 for all n ≠ 0 (since the waveform is symmetric and does not have cosine terms)
bn = (2/T) ∫[0 to T] f(t) sin((2πnt)/T) dt
Computation of bn for n = 1:
We need to compute bn for n = 1 using the formula:
bn = (2/T) ∫[0 to T] f(t) sin((2πt)/T) dt
Breaking the integral into two parts (corresponding to the two regions of the waveform), we have:
bn = (2/T) [∫[0 to T0.9] sin((2πt)/T) dt - ∫[T0.9 to T] sin((2πt)/T) dt]
Evaluating the integrals, we get:
bn = (2/T) [(-T0.9/2π) cos((2πt)/T)] from 0 to T0.9 - (-T0.1/2π) cos((2πt)/T)] from T0.9 to T
bn = (2/T) [(T - T0.9)/2π - (-T0.9)/2π]
bn = (T - T0.9)/π
Fourier Series Decomposition:
The Fourier series decomposition of the square waveform with a 90% duty cycle is given by:
f(t) = (a0/2) + ∑[(an * cos((2πnt)/T)) + (bn * sin((2πnt)/T))]
However, since a0 and an are 0 for this waveform, the decomposition simplifies to:
f(t) = ∑[(bn * sin((2πnt)/T))]
For n = 1, the decomposition becomes:
f(t) = (T - T0.9)/π * sin((2πt)/T)
This represents the Fourier series decomposition of the square waveform with a 90% duty cycle, including the computation of the Fourier coefficients and the final decomposition expression for the waveform.
To know more about waveform, visit:
https://brainly.com/question/26058582
#SPJ11
An engineer employed in a well reputed firm in Bahrain was asked by a government department to investigate on the collapse of a shopping mall while in construction. Upon conducting analysis on various raw materials used in construction as well as certain analysis concerning the foundation strength, the engineer concluded that the raw materials used in the construction were not proper. Upon further enquiry it was found out that the supplier of the project was to be blamed. The supplying company in question was having ties with the company the engineer was working. So upon preparation of final report the engineer did not mention what is the actual cause of the collapse or the supplying company. But when it reached the higher management they forced engineer to *include* the mentioning of the supplying company in the report. Conduct an ethical analysis in this case with a proper justification of applicable 2 NSPE codes.
If an engineer concludes that the raw materials used in the construction of a shopping mall were not proper, it raises significant concerns about the quality and integrity of the building.
In such a situation, the engineer should take the following steps.Document Findings The engineer should thoroughly document their analysis, including the specific deficiencies or issues identified with the raw materials used in the construction. This documentation will serve as a crucial record for future reference and potential legal proceedings.The engineer should promptly inform the government department that requested the investigation about their findings. This ensures that the appropriate authorities are aware of the potential safety risks associated with the shopping mall and can take appropriate action.
To know more about safety visit :
https://brainly.com/question/31562763
#SPJ11
I have found a research study online with regards to PCM or Phase changing Material, and I can't understand and visualize what PCM is or this composite PCM. Can someone pls help explain and help me understand what these two composite PCMs are and if you could show images of a PCM it is really helpful. I haven't seen one yet and nor was it shown to us in school due to online class. pls help me understand what PCM is the conclusion below is just a part of a sample study our teacher gave to help us understand though it was really quite confusing, Plss help
. Conclusions
Two composite PCMs of SAT/EG and SAT/GO/EG were prepared in this article. Their thermophysical characteristic and solar-absorbing performance were investigated. Test results indicated that GO showed little effect on the thermal properties and solar absorption performance of composite PCM. However, it can significantly improve the shape stability of composite PCM. The higher the density is, the larger the volumetric heat storage capacity. When the density increased to 1 g/ cm3 , SAT/EG showed severe leakage while SAT/GO/EG can still keep the shape stability. A novel solar water heating system was designed using SAT/GO/EG (1 g/cm3 ) as the solar-absorbing substance and thermal storage media simultaneously. Under the real solar radiation, the PCM gave a high solar-absorbing efficiency of 63.7%. During a heat exchange process, the temperature of 10 L water can increase from 25 °C to 38.2 °C within 25 min. The energy conversion efficiency from solar radiation into heat absorbed by water is as high as 54.5%, which indicates that the novel system exhibits great application effects, and the composite PCM of SAT/GO/EG is very promising in designing this novel water heating system.
PCM stands for Phase Changing Material, which is a material that can absorb or release a large amount of heat energy when it undergoes a phase change.
A composite PCM, on the other hand, is a mixture of two or more PCMs that exhibit improved thermophysical properties and can be used for various applications. In the research study mentioned in the question, two composite PCMs were investigated: SAT/EG and SAT/GO/EG. SAT stands for stearic acid, EG for ethylene glycol, and GO for graphene oxide.
These composite PCMs were tested for their thermophysical characteristics and solar-absorbing performance. The results showed that GO had little effect on the thermal properties and solar absorption performance of composite PCM, but it significantly improved the shape stability of the composite PCM.
To know more about PCM visit:-
https://brainly.com/question/32700586
#SPJ11