Answer:
it is perpendicular to the surfaces that rub together
The Statement that describe friction is perpendicular to the surfaces that rub together.
What is frictionFriction is the force or resistance that act on a body in motion or when one body rub against each other.
It is the gliding and sliding that occur in a body in motion.
Therefore, The Statement that describe friction is perpendicular to the surfaces that rub together.
Learn more about friction below.
https://brainly.com/question/24338873
#SPJ2
Write the net ionic equation describing the reaction between aluminum metal and Fe3+ ions in solution that produces dissolved Al3+ and Fe2+ ions. Be sure to include all states of matter.
Answer:
Al(s) + Fe³⁺ ----> Al³⁺(aq) + Fe²⁺(aq)
Explanation:
The reaction between aluminium metal with an aqueous solution of Fe³⁺ ions to produce Al³⁺ ions and Fe²⁺ ions is a redox reaction in which the aluminium metal is oxidized while the Fe³⁺ ions are reduced.
Oxidation occurs if the oxidation number of an element or ionic species increases in the positive direction whereas reduction occurs when the oxidation number of the reacting species decreases.
The oxidation number of aluminium increases from 0 to +3 whereas the oxidation number of iron reduces from +3 to =2 in the given reaction.
In a net ionic equation, only the species participating in the reaction are shown.
The equation is given below;
Al(s) + Fe³⁺ ----> Al³⁺(aq) + Fe²⁺(aq)
seasonal variation in Earth's climate are caused by
a Earth's rotation
b Earth's tilt
c Earth's magnetic field
d Earth's precession
Answer: B: Earths tilt
Explanation:
Seasonal variation occurs because the Earth is tilted on its axis by 23.5˚. As Earth orbits the sun, its orientation to the sun changes.
The rate constant for the first-order decomposition of cyclobutane at 500 °C is 9.2 x 10−3 s−1. How long will it take (in seconds) for 80.0% of a sample of C4H8 to decompose?
The time taken to complete the reaction is 179 seconds.
Rate of reaction?Rate of reaction is the time taken for a reaction to attain completion. From the data presented, we have;
Initial concentration = No
Final concentration = No - (0.8No) = 0.2No
rate constant = 9.2 x 10−3 s−1
time taken = t
Given that;
N =Noe^-kt
0.2No =Noe^-( 9.2 x 10−3 t)
0.2 = e^-( 9.2 x 10−3 t)
ln(0.2) = 9.2 x 10−3 t
t = ln(0.2)/-9.2 x 10−3
t = -1.609/-0.009
t= 179 seconds
Learn more about rate of reaction: https://brainly.com/question/25159894?
Which temperature in Celsius (°C) does this thermometer show? –8° 0° 25° 32°
Answer:
0° Celsius
Explanation:
The thermometer shows 0° Celsius which corresponds to 32° F.
Answer:
0 degrees celsius
Explanation:
just did the test
In an lonie lattice:
A atoms are bonded to four others in a
Tetrahedral shapes
atoma are packed together in a
regular euble arrangement
e. atoms are bonded with a single
bonds and one double bond
D. atoms are structured in a vast
network of atoms
Reset Selection
Answer:
atoms are bonded with a single bond one double bond
The kinetic-molecular theory of gases says A. the particles of a gas move independently of each other. B. the particles in a gas move rapidly. C. the particles in a gas are far apart. D. all of the above.
Answer:
D. all of the above.
Explanation:
The kinetic-molecular theory of gases suggests that; the particles of a gas move independently of each other, the particles in a gas move rapidly, the particles in a gas are far apart.
Hope it helps.
a compound contains 28.6 magnesium 14.3 carbon 57.1 oxygen what is the empirical formula
Answer:
Option 3
[tex]MgCO_{3}[/tex]
Explanation:
These are the steps for empirical forumla
1) If given percentage, assume everything in grams
2) Convert those grams to moles (using specific molar mass of each unique element)
3) Divide all the moles by the smallest mole you discovered.
4) Answer will be close to a whole number for each element and that's the answer.
First step, 28.6 g Mg, 14.3 g C, 57.1 g O
Second step:
28.6/24.305 = 1.1767 Mg
14.3/12.01= 1.1907 C
57.1/16.00 = 3.5688 O
Third step:
1.1767/1.1767 = 1 Mg
1.1907//1.1767 ~ 1 C
3.5688/1.1767 ~ 3 O
Put everything together you get!
[tex]MgCO_{3}[/tex]
The empirical formula for the compound is:
C. [tex]MgCO_3[/tex].
What is an Empirical formula?A chemical formula showing the simplest ratio of elements in a compound rather than the total number of atoms in the molecule.
Given:
28.6 g Mg, 14.3 g C, 57.1 g O
In order to determine empirical formula we will divide mass of each given element with the molar mass of the respective element.
[tex]\frac{28.6}{24.305} = 1.1767 Mg[/tex]
[tex]\frac{14.3}{12.01}= 1.1907 C[/tex]
[tex]\frac{57.1}{16.00} = 3.5688 O[/tex]
Dividing each mass with the lowest mass:
[tex]\frac{1.1767}{1.1767 } = 1 Mg[/tex]
[tex]\frac{1.1907}{1.1767 } = 1 C[/tex]
[tex]\frac{3.5688}{1.1767} =3 O[/tex]
Thus, the empirical formula for the compound is [tex]MgCO_3[/tex].
Therefore, option C is correct.
Find more information about Empirical formula here:
brainly.com/question/1603500
Which indicator shows whether a solution is acidic or basic, but not how strong it is?
a)
pH paper
which turns blue in acids and red in bases.
Ob) pH paper which turns red in acids and blue in bases.
c) Litmus paper which turns red in acids and blue in bases.
d) Litmus paper which turns blue in acids and red in bases.
Answer:
Option C
Explanation:
Litmus paper shows only whether the solution is acidic or basic, but not how strong it is.
=> Base turns the red litmus paper blue
=> Acid turns the blue litmus paper red.
What goes in the rest?
Answer:
E. Mass number
H. Ion
F. Isotopes
I hope you have a great day. I'm sorry that I didn't know C or I.
Iron oxide reacts with carbon monoxide to produce iron and carbon dioxide, with the balanced chemical equation Fe2O3 + 3CO —> 2Fe + 3CO2. What does this tell you
about the relative amounts of iron oxide and iron consumed and produced in this equation?
A. For every two moles of iron oxide consumed, one mole of iron is produced,
B. For every two grams of iron oxide consumed, one gram of iron is produced.
C. For every gram of iron oxide consumed, two grams of iron are produced
D. For every mole of iron oxide consumed, two moles of iron are produced.
Answer:
Option D. For every mole of iron oxide consumed, two moles of iron are produced.
Explanation:
The balanced equation for the reaction is given below:
Fe2O3 + 3CO —> 2Fe + 3CO2
From the balanced equation above,
1 mole of iron oxide, Fe2O3 reacted with 3 moles of carbon monoxide, CO to produce 2 moles of iron, Fe and 3 moles of carbon dioxide, CO2.
Thus, with a careful observation of the equation, we can conclude that for every 1 mole of iron oxide, Fe2O3 consumed, 2 moles of iron, Fe are produced.
Which is the electron configuration for zinc?
1. 1s22s22p63s23p64s2308
2. 1s22s22p63s23p64513d10
3. 1s22s22p53s23p64523010
4. 1s22s22p63s23p64523010
Answer:
The electron configuration for zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. To find electron configuration, simply follow the periodic table from top to bottom, left to right (basically increasing atomic number) until you reach the element you are looking for.
A solution...
A. is a single-phase homogeneous mixture.
B. can contain more than two phases.
C. must contain water.
D. is always a liquid.
Answer:
A
Explanation:
Answer:
A
Explanation:
"It means of solving a problem or dealing with a difficult situation."
What is the mass in grams of each elemental sample?
A. 6.65 mol W
B. 0.588 mol Ba
C. 68.4 mil Xe
D. 1.57 mol S
Answer:
Mass (m) = Number of moles(n) × Molar mass (M)
A. 6.65 mol W
M (W) = 184 g/mol
n = 6.65mol
mass of W = 6.65 × 184 = 1223.6g
B. 0.588 mol Ba
M(Ba) = 137g/mol
n = 0.588 mol
mass of Ba = 0.588 × 137 = 80.556g
C. 68.4 mol Xe
M(Xe) = 131g/mol
n = 68.4 mol
mass of Xe = 68.4 × 131 = 8960.4g
D. 1.57 mol S
M(S) = 32.1 g/mol
n= 1.57 mol
mass of S = 1.57 × 32.1 = 50.397g
Hope this helps
how many dots would go around xenon in electron dot diagram
Answer:
8
Explanation:
Since Xe (xenon) is a noble gas, it has 8 valence electrons. It's outer shell is full and it is a stable element and doesn't like to react. Therefore, since the electron dot diagram is about valence electrons, 8 would be your answer.
Elements with an oxidation number of 2 include which of the following?
Check all that apply.<<<
O A. Lithium
B. Magnesium
C. Potassium
D. Calcium
Answer:
b-Mg
d-Ca
Explanation:
all the group two metals have oxidation of 2
Answer:
Calcium , Magnesium
Explanation:
APEX
All of the following are units for pressure except _____. A. Pa B. psi C. atm D. Hg
Answer:
B. psi
Explanation:
Pa is Pascal
atm is atmosphere
Hg is Mercury
hope it helps.
What does percent composition tell you about a molecule?
O A. It tells you the ratio of elements in the molecular formula.
O B. It tells you how the elements are arranged in the molecule.
O C. It gives you the total number of atoms in the molecule.
D. It tells you how much of a molecule is made up of each element.
Balance each of the following chemical equations:
a. N2(g) + O2(g) → NO(g)
b. HgO(s) = Hg(l) + O2(8)
c. Fe(s) + O2(g) →→ Fe2O3(s)
d. Na(s) + Cl2(g) →→ NaCl(s)
e. Cu2O(s) + O2(g)
→ CuO(s)
Answer:
a. N₂(g) + O₂(g) → 2 NO(g)
b. 2 HgO(s) → 2 Hg(l) + O₂(g)
c. 4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s)
d. 2 Na(s) + Cl2(g) → 2 NaCl(s)
e. 2 Cu₂O(s) + O₂(g) → 4 CuO(s)
Hope this helps.
Which two compounds are used in batteries? sulfuric acid and potassium hydroxide, lithium hydroxide and nitric acid, potassium hydroxide and nitric acid ,sulfuric acid and ammonium hydroxide.
Answer:
sulfuric acid and potassium hydroxide is actually the answer, not the girls above me.
Explanation:
EDU SAID SO
The two compounds are used in batteries are sulfuric acid and potassium hydroxide.
What electrolytic compounds present in a batteries?The chemicals present in a different type of batteries are sodium chloride, sulfuric acid, hydrochloric acid, chloric acid, potassium nitrate, nitric acid, sodium hydroxide, magnesium hydroxide and sodium acetate.
To learn more about batteries here.
https://brainly.com/question/3458926
#SPJ2
hello:) is hydrogen chloride and hydrochloride acid the same??
Answer:
No because hydrogen chloride is gas and hydrochloric acid is (as stated in the name) an acid. The formula for hydrogen chloride is HCI(g), the little g states that the compound is a gas and the formula for hydrochloric acid is HCl(aq) and the little aq means aqueous.
Answer:
no. they are not the same
Explanation: Although, they both do have the same chemical formula HCL, they differ in their states of matter. Hydrogen chloride is a gas whereas hydrochloric acid is a solution of hydrogen chloride gas and water( creates an aquaeous solution). Hydrochloric acid is highly corrossive.
You should think critically about scientific evidence supporting product claims because _____. A. there is no comparison group B. the product has been evaluated by a reliable source C. the information may be distorted in order to sell more D. there could be another product that is a better value for the money
Answer:
The correct answer is C. Plz mark brainiest
Explanation:
PLEASE HELP!
Why is phosphorus diamagnetic.
Answer:
FROM the magnetic point of view, phosphorus is an extremely interesting
substance because of its allotropic modifications. The ordinary forms are
the yellow (or white) and the red varieties. X-ray investigations indicate
that probably yellow phosphorus is analogous with the cubic forms of antimony and arsenic; and red phosphorus with monoclinic antimony and
arsenic (Mellor, 1928). The conclusions of different workers on the structure of red phosphorus are not in agreement. There is also Bridgman's black
phosphorus which is probably hexagonal (Linck and lung, 1925). Natta
and Passerini (1930) have studied the crystal structure of white phosphorus.
This substance when condensed at the temperature of liquid ammonia is
cubic. Atomic positions however are yet undetermined. Another and noncubic form is obtained by condensation at liquid-air temperatures. It is
thus clear that most likely white phosphorus is cubic in structure with a
probable superposition of another lattice.
The evidence from Raman effect also points to the same conclusion.
Bhagavantam (1930) investigated the Raman effect of white phosphorus in
the solid state. The characteristic frequencies obtained by him are 607, 468
and 374. Since the phosphorus molecule is known to contain 4 atoms,
Bhagavantam (1930) has shown that the tetrahedral structure fits the results
satisfactorily since such a structure would give only three frequencies. But
for the particular law of forces adopted, the frequencies should have the
ratio 2: 2: 1 but the observed frequencies deviate considerably.
Phosphorus is a really intriguing element. because of the allotropic changes to the material.
Why phosphorus is dimagnetic?Red phosphorus is likely akin to monoclinic antimony, while yellow phosphorus is probably similar to the cubic forms of antimony and arsenic.
There is disagreement among the findings of many researchers regarding the structure of red phosphorus. Additionally, Bridgman's black It is presumably hexagonal, phosphorous (Linck and lung, 1925). Natta and Passerini (1930) have investigated the white phosphorus crystal structure.
Condensed from this material at liquid ammonia temperature is cubic. However, the locations of the atoms are still unknown. Condensation at liquid air temperatures yields a different, noncubic shape.
Therefore, Phosphorus is a really intriguing element. because of the allotropic changes to the material.
To learn more about phosphorus, refer to the link:
https://brainly.com/question/4622631
#SPJ3
PLEASE HELP! Write the full electron configuration for phosphorus, atomic symbol P, then draw an orbital box diagram that accounts for all of the electrons in phosphorus. You don’t need to include the orbital box diagram as part of your answer. Based on your drawing, explain why phosphorus is either paramagnetic or diamagnetic.
Answer:
1) The full electron configuration for phosphorus is 1s²2s²2p⁶3s²3p
2) Phosphorus is paramagnetic
Explanation:
1) To write the electron configuration, we follow the electron filling order, that is starting from 1s, to 2s, 2p, 3s, 3p, 3d, 4s, 4p, 4f, 5s, 5p, 5d, 6s till the electrons are all accounted for (up to 58)
We note that the s orbitals can each take two electrons while the p orbital can take 6 electrons and the d orbital can take 10 electrons
The electron configuration chart for phosphorus, P, is given as follows;
1s²2s²2p⁶3s²3p.
2) Diamagnetism is the temporary magnetism is the magnetism of a material that exists in the presence of a magnetic field due to a a change in the atomic electron orbital motion
Paramagnetism is a magnetism in which a material is weakly attracted by an applied external magnetic field such that there is induced magnetism in the applied magnetic field direction
Paramagnetic materials have have unpaired electrons that give them permanent magnetic moments in the absence of an applied magnetic field as such unpaired electrons are termed paramagnetic electrons and atoms that have one or more unpaired electrons are paramagnetic
Phosphorus, with the 3 partially filled p orbitals have 3 unpaired electrons in their outermost shell giving them the overall properties of a paramagnetic materials.
What is the mass of a sample of copper that contains 4.78 x 1023 atoms?
Answer:
50.45679
Explanation:
mass of 1 mole(6.02 x 10^23atoms) of copper: 63.546g
so,
63.546g x 4.78 x 10^23 / 6.02 x 10^23 = 50.45679g (you could round this to the nearest decimal if u wish so)
Liquid hydrogen peroxide (H2O2) breaks down into water and oxygen gas.
Answer:
i got ddoxed by skai jackson
Explanation:
it sucked
9. A bond formed between a silicon atom and an oxygen atom is likely to be
O polar covalent
O coordinate covalent
O ionic
O nonpolar covalent
The answer is
O ionic
Explanation:
A bond formed between a silicon atom and an oxygen atom is likely to be: ionic
Answer: Polar covalent
Explanation: Gradpoint
The arrows in the chart below represent phase transitions.
Which arrows represent the phase transitions in which heat energy is gained?
1, 2, and 3
2, 3, and 5
3.4. and 5
4.5 and 6
Answer:
a. 1,2,and 3.
Explanation:
When something turns liquid, e.g. metal, you need to heat it. When something turns gas, e.g. water, you need to heat it. And when something goes directly from solid to gas, e.g. dry ice, carbon dioxide, you need to add heat to it. hope this helps! Please mark brainiest.
For the galvanic (voltaic) cell Fe(s) + Mn2+(aq) → Fe2+(aq) + Mn(s) (E°= 0.77 V at 25°C), what is [Fe2+] if [Mn2+] = 0.040 M and E = 0.78 V?
Assume T is 298 K
Answer:
0.01836 M
Explanation:
Again the reaction equation is;
Fe(s) + Mn2+(aq) → Fe2+(aq) + Mn(s)
E°cell= 0.77 V
Ecell= 0.78 V
[Mn2+] = 0.040 M
[Fe2+] = the unknown
n=2
From Nernst's equation;
Ecell= E°cell- 0.0592/n log Q
0.78= 0.77 - 0.0592/2 log [Fe2+] /[0.040]
0.78-0.77= - 0.0592/2 log [Fe2+] /[0.040]
0.01/ -0.0296= log [Fe2+] /[0.040]
-0.3378= log [Fe2+] /[0.040]
Antilog(-0.3378) = [Fe2+] /[0.040]
0.459= [Fe2+] /[0.040]
[Fe2+] = 0.459 × 0.040
[Fe2+] = 0.01836 M
The Fe ion concentration in the galvanic cell has been 0.0186 M.
The Nernst equation has been used for the determination of the voltage of the galvanic cell.
It can be given as:
[tex]\rm E_c_e_l_l\;=\;E_0\;-\;\dfrac{0.059}{n}\;\times\;log\;\dfrac{[Fe^+]}{[Mn^2^+]}[/tex]
where, n = number of electrons transfer = 2
[tex]\rm E_0[/tex] = initial voltage = 0.77 V
[tex]\rm E_c_e_l_l[/tex] = cell voltage = 0.78 V
Iron ion concentration = 0.040 M
Susbstituting the values:
0.78 = 0.77 - [tex]\rm \dfrac{0.059}{2}\;\times\;log\;\dfrac{[Fe^2^+]}{[0.040]}[/tex]
0.78 - 0.77 = -0.0296 [tex]\rm \times\;log\;\dfrac{[Fe^2^+]}{[0.040]}[/tex]
-0.03378 = [tex]\rm log\;\dfrac{[Fe^2^+]}{[0.040]}[/tex]
antilog (-0.03378) = [tex]\rm \dfrac{[Fe^2^+]}{0.040}[/tex]
Iron ion concentration = 0.0186 M
Thus, the Fe ion concentration in the galvanic cell has been 0.0186 M.
For more information about the galvanic cell, refer to the link;
https://brainly.com/question/3300198
what sentence describes all atoms of one element A. They have the same number of isotopes B. They have the same properties C. They have the same number of protons D.They have the same number of neutrons
Answer:
C. They have the same number of protons.
Explanation:
Even though in isotopes, there's uneven number of neutrons, there's always same number of protons.
Hope it helps.
Which of the measurement contain three significant figure?
Answer:
The answer is explained below
Explanation:
The question is not complete.
The correct question should be like:
Which of the measurement contain three significant figure?
500
395
0.001
0.00100
1 × 10⁻³
5 × 10²
Answer:
The following are rules applied when considering significant figures:
i) All digits are significant excluding zero. E.g of significant digits are 1,2,3,4,5,6,7,8,9
ii) Any zero that appear within or after non zero digits are significant e.g. 200, 1004, 500009
iii) Zeros before non zero digits are not significant. An example shows significant digits bolded 001, 0.0012, 001.56
iv) Zeros that come after non zero digits are significant even if the number is in decimal form. An example shows significant digits bolded 1000, 0.001200, 001.5600
Therefore:
500: It contains three significant digits
395: It contains three significant digits
0.001: It contains only one significant digits
0.00100: It contains three significant digits
1 × 10⁻³: 1 × 10⁻³ = 0.001. It contains only one significant digits
5 × 10²: 5 × 10² = 500. It contains three significant digits
The measurements that contain three significant figure are 500, 395, 0.00100 and 5 × 10²