What is the half-life for the first order decay of 14C according to the reaction, 146C — 147N +e- ?
The rate constant for the decay is 1.21 x10-4 year-1

Answer:

33.3% of Sn in the sample

Explanation:

The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.

Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:

2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.

As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:

9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺

As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g

And the percentage of Sn in the sample is:

1.00g / 3.00g ₓ 100 =

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

8.33mL or .0083L

Explanation:

Use m1 * V1 = m2 * V2

6.00M(x) = 0.100M(500mL)

solve for x

x= (.1 * 500) / 6

x=8.333 mL

Answer:

Explanation:

Volume of silver cube = 2.42³ = 14.17 cm³

mass of silver cube = volume x density

= 14.17 x 10.49 = 148.64 gm

Volume of gold cube = 2.75³ = 20.8  cm³

mass of gold cube =  20.8 x 19.3 = 401.44 gm

specific heat of silver and gold are .24 and .129 J /g°C

mass of 112 mL water = 112 g

Heat absorbed = heat lost = mass x specific heat x temperature fall or rise

Heat lost by metals

= 148.64 x .24 x ( 85.4 -T) + 401.44 x .129 x ( 85.4 - T )

= (35.67 + 51.78 ) x ( 85.4 - T )

87.45 x ( 85.4 - T )

= 7468.23 - 87.45 T

Heat gained by water

= 112 x 1 x ( T - 20.5 )

= 112 T - 2296

Heat lost = heat gained

7468.23 - 87.45 T = 112 T - 2296

199.45 T = 9764.23

T = 48.95° C

Answer:

NaClO + CH₃COOH ----> HClO + CH3CO- + Na

Explanation:

This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction

Answer:

pH = pKa + log (33.7 mm / 26.3 mm)

Explanation:

Initial pH = 6.83

If we add a strong base, we expect that pH would be more alkaline

Initially we have: 60 mL . 0.50M =  30 mmoles of acid

Now, we add the base:

3.7 mL . 1.00 M = 3.7 mmmoles of base

Concentration of acid: 30 mmoles - 3.7 mmoles of base = 26.3 mm

Concentration of salt: 30 mmmoles + 3.7 mmoles of base = 33.7 mm

pH = pka + log (33.7 mm / 26.3 mm)

Information of pKa is missing

Answer:

See explanation

Explanation:

For the first part of the question, we have to check the chiral carbons in 4-methyl-1,2-cyclohexanediol. In this case carbons, 1 and 2 are chiral, if we have 2 chiral carbons we will have 4 isomers. We have to remember that formula 2^n in which "n" is the number of chiral carbons, so:

2^n = 2^2 = 4 isomers

And the isomers that we can have are:

1) (1R,2S)-4-methylcyclohexane-1,2-diol

2) (1S,2S)-4-methylcyclohexane-1,2-diol

3) (1S,2S)-4-methylcyclohexane-1,2-diol

4) (1S,2R)-4-methylcyclohexane-1,2-diol

See figure 1

For the second part of the question, we have to remember that the oxidation with [tex]OsO_4[/tex] is a syn addition. In other words, the "OHs" are added in the same plane. In this case, we have the methyl group with a wedge bond, so the "OH" groups will have a dashed bond due to the steric hindrance. Due to this we only can have 1 isomer ((1S,2R,4S)-4-methylcyclohexane-1,2-diol). Finally, on this molecule, we dont have any symmetry planes (this characteristic will cancel out the optical activity), so the product of this reaction has optical activity.

See figure 2

I hope it helps!

five oxygen molecules

step by step explanation.

according to the equation,one molecule of oxygen is enough to react with two carbon molecules thus 10 carbon molecules need 5oxygen molecules

Answer:

please look at the picture below.

Explanation:

Answer:

Francium

Explanation:

The atomic radius increases from top to bottom in a group, and decreases from left to right across a period.

so francium (Fr) is the largest atom or has highest radii.

Hope this helps & please mark as brainiest!

Answer:

Francium has the largest atomic radius.

The general trend for atomic radii is increasing from top to bottom and decreasing from left to right so the one with the largest atomic radius will be in the bottom left of the periodic table.

Answer:

intermolecular dipole-dipole hydrogen bonds

Explanation:

Water is a polar molecule. Recall that the central atom in water is oxygen. The molecule is bent, hence it has an overall dipole moment directed towards the oxygen atom. Since it has a permanent dipole moment, we expect that it will show dipole-dipole interactions in the liquid state.

Similarly, water contains hydrogen and oxygen. Recall that hydrogen bonds are formed when hydrogen is covalently bonded to highly electronegative elements. Hence, water in the liquid state exhibits strong hydrogen bonding. The unique type of dipole-dipole interaction in liquid water is actually hydrogen bonding, hence the answer.

Answer: The molarity of solution is 0.221 M

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in L

moles of [tex]NaI[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{49.8g}{149.89g/mol}=0.332mol[/tex]

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{0.332mol}{1.50L}[/tex]

[tex]Molarity=0.221mol/L[/tex]

Therefore, the molarity of solution is 0.221 M

Answer:

(a) The empirical formula of the compound is

m(CxHy) + m(O2) = m(CO) + m(CO2) + m(H2O).

(b) The grams of O2 that were used in the reaction is 1.146 g

(c) The amount of O2 that would have been required for complete combustion is 1.401 g.

Explanation:

a. m(CxHy) + m(O2) = m(CO) + m(CO2) + m(H2O)

(b) Using law of conservation of mass from above

m(O2) = m(CO) + m(CO2) + m(H2O) - m(CxHy)

m(O2) = 0.446 + 0.700 + 0.430 - 0.430

m(O2) = 1.146 g

The grams of O2 that were used in the reaction is 1.146 g

(c) for complete combustion, we need to oxidized CO to CO2

Then, 2CO +O2 = 2CO2

m(add)(O2) = M(O2)*¢(O2)/2 = M(O2) * {(m(CO))/(2M(CO))}

m(add)(O2) = 32 * {(0.446)/(2*28)} = 0.255 g

Note; Molar mass of O2 = 32, CO = 28

m(total)(O2) = m(O2) + m(add)(O2)

m(total)(O2) = 1.146 + 0.255 = 1.401 g

The amount of that grams would have been required for complete combustion is 1.401 g.

Note (add) and (total) were used subscript to "m"

Combining quantum theory with wave motion of atomic particles is: Wave Mechanics

Answer:

C.

Explanation:

Since the mass number is the number of protons and neutrons added together, the answer is 35. Since the questions are respectively electron quantity and mass number, the only answer choice with 35 as the second choice is C, so that is the correct answer.

Answer:

[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]

Explanation:

[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]

Answer:

[tex]1) NH_{4}IO_{3}\\2) Pb(IO_{3})_{4} \\3) NH_{4}(C_{2}H_{3}O_{2})\\4) Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Explanation:

[tex]1) NH_{4}^{+}IO_{3}^{-} ---> NH_{4}IO_{3}\\2) Pb^{4+}(IO_{3}^{-})_{4} --->Pb(IO_{3})_{4} \\3) NH_{4}^{+}(C_{2}H_{3}O_{2})^{-} ---> NH_{4}(C_{2}H_{3}O_{2})\\4) Pb^{4+}(C_{2}H_{3}O_{2})^{-} _{4} --->Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Answer:

The lewis structure of the compounds can be drawn by making the skeleton of the molecule first. Then the different atoms are arranged and the electrons are arranged in their bonding pattern. The lone pair of the atoms, which are not involved in the bonding are represented by the dots.

So the lewis structures of both the compound methyl mercaptan has been in the attached image:

Spelling of methyl metcaptain is wrong, the correct spelling is methyl mercaptan.

Answer:

Methyl mercaptan is also known as Methanethiol with the chemical formula  CH3SH and it is an organosulfur compound.

For lewis structure of methyl mercaptan (CH3SH), there are total 14 valence electrons. Four hydrogen atoms has one valence electron each, carbon has four valence electrons and sulfur has six valence electrons. Carbon form one bond with three hydrogen atoms by sharing one electron with each, carbon form one single bond with sulfur atom by sharing one electron with it and sulfur form one single bond with hydrogen. Sulfur left with four unpair electrons.

Answer:

THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O

Explanation:

The empirical formula for the unknown compound can be obtained by following the processes below:

1 . Write out the percentage composition of the individual elements in the compound

C = 75.68 %

H = 8.80 %

O = 15.52 %

2. Divide the percentage composition by the atomic masses of the elements

C = 75 .68 / 12 = 6.3066

H = 8.80 / 1 = 8.8000

O = 15.52 / 16 = 0.9700

3. Divide the individual results by the lowest values

C = 6.3066 / 0.9700 = 6.5016

H = 8.8000 / 0.9700 = 9.0722

O = 0.9700 / 0.9700 = 1

4. Round up the values to the whole number

C = 7

H = 9

O = 1

5 Write out the empirical formula for the compound

C7H90

In conclusion, the empirical formula for the unknown compound is therefore C7H9O

Answer:

[tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

Explanation:

In this question, we have to remember the relationship between Q (heat) and the specific heat (Cp) the change in temperature (ΔT), and the mass (m).

[tex]Q=m*Cp*ΔT[/tex]

The next step is to identify what values we have:

[tex]Q~=~1870~J[/tex]

[tex]m~=~85.01~g[/tex]

[tex]ΔT~=~45.2~^{\circ}C[/tex]

[tex]Cp~=~X[/tex]

Now, we can plug the values and solve for "Cp":

[tex]1870~J=~85.01~g~*Cp*45.2~^{\circ}C[/tex]

[tex]Cp=\frac{1870~J}{85.01~g~*45.2~^{\circ}C}[/tex]

[tex]Cp=0.48~\frac{J}{g~^{\circ}C}[/tex]

The unknow metal it has a specific value of [tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

I hope it helps!

Answer:

d) El agua pesada contiene mas elementos

Explanation:

La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.

Answer:

....................

lllllllllllllllll

Explanation:ki

Answer:

(+)-cholesterol = 71.88%

(-)-cholesterol = 28.12%

Explanation:

Asuming 1 gram of sample is dissolved in 1mL of water and the sample cell was 1dm long.

Enantiomeric excess is defined as the amount of pure enantiomer in a sample. The formula is:

ee = [α]mixture / [α]pure enantiomer.

Replacing:

ee = 14° / 32°×100 = 43.75%

As the sample is 14°, There is an excess of (+)-cholesterol and 56.25% is a 1:1 mixture of enantiomers.

That means percent composition of enantiomers is:

Answer:

158.7 g

Its the right answer

Answer:

C. A positive and a negative ion

Explanation:

Acids and bases are made up of charged particles known as ions. The ions present in acids are oppositely charged and are held together by strong electrostatic forces. When acids or bases are dissolved in water, the electrostatic forces holding their individual molecules together are weakened and these ions are free to move apart in a process known as dissociation. Dissociation occurs because of the attraction between the positive and negative ions in the acid and bases and the negative and positive polarity of water.

For example, when an acid like hydrochloric acid is dissolved in water it dissociates into positive and negative ions as follows:

HCl(aq) -----> H+ + Cl-

When a base like sodium hydroxide is dissolved in water, it dissociates into positive and negative ions as follows:

NaOH(aq) ----> Na+ + OH-

Answer:

yeah C is correct

Explanation:

Answer:

1. 2+ ([tex]Cu^{2+}[/tex]).

2. 0 ([tex]Cu^0[/tex]).

Explanation:

Hello,

In this case, the described chemical reaction is a redox reaction in fact, since the oxidation states of both magnesium and copper change as shown due to the displacement:

[tex]Mg(s)+Cu(NO_3)_2(aq)\rightarrow Mg(NO_3)_2(aq)+Cu(s)[/tex]

Therefore:

1. Since copper is the cation in the copper (II) nitrate, the (II) means that its charge is 2+ ([tex]Cu^{2+}[/tex]).

2. Since copper is alone, it means no electrons are being neither shared not given, its charge is 0 ([tex]Cu^0[/tex]).

Best regards.

Answer: pH=2.38

Explanation:

To calculate the pH, let's first write out the equation. Then, we will make an ICE chart. The I in ICE is initial quantity. In this case, it is the initial concentration. The C in ICE is change in each quantity. The E is equilibrium.

            HCOOH ⇄ H⁺ + HCOO⁻

I               1.0M          0          0

C              -x            +x        +x

E            1.0-x            x          x

For the steps below, refer to the ICE chart above.

1. Since we were given the initial of HCOOH, we can fill this into the chart.

2. Since we were not given the initial for H⁺ and HCOO⁻, we will put 0 in their place.

3. For the change, we need to add concentration to the products to make the reaction reach equilibrium. We would add on the products and subtract from the reactants to equalize the reaction. Since we don't know how much the change in, we can use variable x.

4. We were given the Kₐ of the solution. We know [tex]K_{a} =\frac{product}{reactant}=\frac{[H^+][HCOO^-]}{[HCOOH]}[/tex].

5. The problem states that the Kₐ=1.8×10⁻⁴. All we have to so is to plug it in and to solve for x.

[tex]1.8*10^-^4 =\frac{x^2}{0.1-x}[/tex]

6. Once we plug this into the quadratic equation, we get x=0.00415.

7. The equilibrium concentration of [H⁺]=0.00415. pH is -log(H⁺).

-log(0.00415)=2.38

Our pH for the weak acid solution is 2.38.

Answer:

Explanation:

mass of one virus = 9.0 x 10⁻¹² mg

mass of one mole = 6.02 x 10²³ x mass of one virus

= 6.02 x 10²³ x 9.0 x 10⁻¹²

= 54.18 x 10¹¹ mg

= 54 x 10⁸ g .

= 54 x 10⁵ kg .

b )

let n be no of moles of virus that will be equal to weight of oil tanker

n x 54 x 10⁵ = 3 x 10⁷

n = 5.5555  

rounding off to 2 significant figure

5.6 moles Ans .

Answer:

8.59 g

2.25 g

Explanation:

According to the given situation the calculation of grams of PbO and grams of NaCL is shown below:-

Moles of Pb(OH)CL is

[tex]= \frac{Mass}{Molar\ mass}[/tex]

[tex]= \frac{10.0 g}{259.65g / mol}[/tex]

= 0.0385 mol

Mass of PbO needed is

[tex]= 0.385mol Pb(OH) Cl\times \frac{1 mol PbO}{1molpb (OH) cl} \times \frac{223.2g PbO}{1mol PbO}[/tex]

After solving the above equation we will get

= 8.59 g

Mass of NaCL needed is

[tex]= \frac{1mol\ NaCl}{1molPb\ (OH)Cl} \times \frac{58.45NaCl}{1mol NaCl}[/tex]

After solving the above equation we will get

= 2.25 g

Therefore we have applied the above formula.

The answer is Hydrogyn bonding. It keeps the water molocules bonded together and in a liquid state, without it it'd be in a gashious state.

Answer:Hydrogen bonds keep them together in room temperature, hope this helps!

Explanation:

<!> Brainliest is appreciated! <!>

Answer:

The incorrect statement from the options is OXIDATION IS A "GAIN" OF ELECTRONS

Explanation:

Oxidation in a redox reaction is the loss of electrons. It is also the increase in the oxidation states of an atom or ion or atoms in a molecule. A redox reaction is a type of chemical reaction in which there is a transfer of electrons from an atom or ion to another resulting in a change in oxidation states of the substances involved. The reducing agent in the reaction is undergoes oxidation by losing electrons while the oxidating agent is reduced that is it gains electrons at the end of the reaction. The atom or ion from which electron is lost is said to be oxidized while the other atom or ion involved in the reaction is reduced.

Oxidation is also the combination with O atoms and it is always accompanied by reduction because oxidation forms a half of the whole redox reaction. A substance cannot be oxidized except it has reduced another substance by losing electrons to it.