Answer:
C. Feeling the heat from holding the cup
Explanation:
Conduction is the process by which heat or electricity is directly transmitted through a substance to another substance that has different levels of heat or electricity.
Therefore, the only logical answer is C. Feeling heat from holding the cup.
This is because the heat from the cup is being directly transmitted to the hand of the person.
Hope this helps!!
- Kay :)
Select the correct answer.
In this reaction, what effect does a change in the concentration of substances have on the reverse reaction rate?
CaCO3(s) ⇌ CaO(g) + CO2(g)
A.
The rate of the reverse reaction increases with an increase in the concentration of CaCO3(s).
B.
The rate of the reverse reaction increases with an increase in the concentration of CaO(g) and CO2(g).
C.
The rate of the reverse reaction decreases with a decrease in the concentration of CaCO3(s).
D.
The rate of the reverse reaction decreases with an increase in the concentration of CaO(g) and CO2(g).
E.
The rate of the reverse reaction increases with a decrease in the concentration of CaO(g) and CO2(g).
Answer:
A. The rate of the reverse reaction increases with an increase in the concentration of CaCO3(s)
Explanation:
If the concentration of a reactant has increased, The substance will shift in the direction of the reaction that uses the reactants, So that the Reactants substance Increases.
Pl help it’s for a grade I will give Brainly if right
Answer:
A. moving
Explanation:
37 grams of H3PO4 ????
Answer:
76 grams is the correct answer to this question
true or false
sugar melting an example of oxidation
and
water evaporating
Answer:
false i think
Explanation:
2. A sample of oxygen gas is placed in a rigid 1.5L glass container at STP. If the gas is
heated to 100 degrees (Celcius) what is the new pressure in mmHg?
The new pressure : P₂ = 1038.39 mmHg
Further explanationGiven
1.5 L container at STP
Heated to 100 °C
Required
The new pressure
Solution
Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure).
So P₁ = 1 atm = 760 mmHg
T₁ = 273 K
T₂ = 100 °C+273 = 373 K
Gay Lussac's Law
When the volume is not changed, the gas pressure is proportional to its absolute temperature
[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
Input the value :
P₂=(P₁.T₂)/T₁
P₂=(760 x 373)/273
P₂ = 1038.39 mmHg
You can fit 25 drops of substance X on a penny and 12 drops of substance Y on a different penny. Explain the difference in terms of strength of IMF.
Answer:
In the experiment performed involving the number of liquid drops that a penny can hold, 25 drops of substance X can fit in a penny while only 12 drops of substance Y can fit on another penny because, substance X is more viscous than substance Y. Thus, the intermolecular forces present in substance X are stronger than those present in substance Y.
Explanation:
Intermolecular forces (IMF) are the forces which exist between the neighboring molecules of a a substance. These forces, though weaker than intramolecular forces which acts between neighboring atoms, they still are responsible for several differences in the physical properties of substances with comparatively similar molecular masses.
The three major types of intermolecular forces are, hydrogen bonding, dipole–dipole interactions and London dispersion forces.
The existence of intermolecular forces in molecules of substances results in increase in melting and boiling points, surface tension, capillary action, viscosity, as well as surface area of substances,
Viscosity, which is the resistance to flow offered by a liquid increases with increase in the intermolecular forces between the molecules of a liquid.
In the experiment performed involving the number of liquid drops that a penny can hold, 25 drops of substance X can fit in a penny while only 12 drops of substance Y can fit on another penny because, substance X is more viscous than substance Y. Thus, the intermolecular forces present in substance X are stronger than those present in substance Y.
A ball rolling down a hill is what form of energy?
Answer:
Kinetic energy
Explanation:
An object that is in motion possesses Kinetic energy. A ball rolling down a hill will possess kinetic energy.
Answer:
kinetic I think that's the answer
Why does the periodic table have the shape it has
Answer: The arrangement of electrons in atoms is responsible for the shape of the periodic table.
Explanation: Electron configurations can be predicted by the position of an atom on the periodic table.
O_O O_O O_O
Add me as a freind!!! <3
The periodic table has the shape it has because the elements are arranged according to their atomic number, which is the number of protons in the nucleus of an atom.
The chemical elements are arranged in a periodic table in ascending order of atomic number, allowing one to observe trends in the elements' properties.
Here are some of the reasons why the periodic table has the shape it has:
The number of protons in the nucleus of an atom determines its chemical properties. Elements with similar numbers of protons have similar chemical properties, so they are grouped together in the periodic table.The number of electron shells in an atom determines its size and its reactivity. Elements with the same number of electron shells have similar sizes and reactivities, so they are grouped together in the periodic table.The number of valence electrons in an atom determines its chemical bonding. Elements with the same number of valence electrons have similar chemical bonding properties, so they are grouped together in the periodic table.The periodic table is a valuable tool for understanding the chemical properties of the elements.
Therefore, above mentioned are some of the reasons why periodic table has the shape it has.
Learn more about atom here;
https://brainly.com/question/13654549
#SPJ6
Convert 4, 294 grams to pounds. Use the conversion factor 1 pound = 453.59 grams.
Calculate how many grams of Aluminum are needed to produce 21.6 grams of Aluminum oxide (Al2O3).
4Al + 3O2 → 2Al2O3
i need this like rn please.
Answer:
0.347
Explanation:
Al is the limiting reagent.
Explanation:
The stoichiometry of the reaction is such that 4 moles of Al are required for every 3 moles of diatomic oxygen. This means that if the ratio of Al to diatomic oxygen is greater than 4/3, then the oxygen is the limiting reagent. If the ratio of Al to diatomic oxygen is less than 4/3, then Al is the limiting reagent.
The problem state that the ratio of Al to diatomic oxygen is
0.32
0.26
=
16
13
=
48
39
<
52
39
=
4
3
The ration of Al to diatomic oxygen is less than 4/3, so Al is the limiting reagent.
We can also see this if we ask the question "How much Aluminum" is required to completely react 0.26 moles of diatomic oxygen??
0.26
moles
O
2
×
4
moles
A
l
3
moles
O
2
≈
0.347
moles
A
l
So it would take 0.347 moles of Al to completely react with all of the oxygen, however there is only 0.32 moles of Aluminum present, so there is not enough Al to react with all of the oxygen, and so we say that the Al is the limiting reagent.
The mass of Aluminum are needed to produce 21.6 grams of Aluminum oxide (Al₂O₃) is
What is mass?
Mass of any element is equal to the product of its number of moles and molar mass.
For the compound, Aluminum oxide (Al₂O₃)
The atomic masses of Aluminum is 23 and oxygen is 16.
Molecular or molar mass = ( 2 × 23 ) + ( 3 × 16 ) units
M = 46 + 48 = 94 units
The mass of Aluminum in 1 mole of aluminum oxide ,46 grams in 94 grams
Mass of Aluminum in the given 21.6 g of Aluminum oxide will be;
94 grams of Aluminum oxide contains 46 grams of Aluminum.
21.6 grams of Aluminum oxide will contain ( 46 / 94 ) × 21.6 = 10.57g of Aluminum.
Therefore, 10.57g of Aluminum are needed to produce 21.6 grams of Aluminum oxide (Al₂O₃)
Learn more about mass.
https://brainly.com/question/14104216
#SPJ2
Objects can be charged when electrons move from one object to another by direct contact 1.Charging by conduction (contact) 2.Charging by conduction (contact), , 3.Charging by friction 4.Static electricity charging by induction
Answer:
Charging by conduction (contact)
Static electricity charging by induction
Explanation:
A body can be charged when another body is made to touch it such that charges are transferred from a charged body to an uncharged body. This is known as charging by contact.
A body can also be charged by induction. In this case, a charged body is only brought near an uncharged body without really touching the uncharged body. Charges are transferred without physical contact of the bodies.
Answer:
the one above is correct
Explanation:
-no need-
Which is element number 2&20
Answer:
2- Helium(He)
20-Calcium(Ca)
Answer:
Do you mean under 2 & 18 or under 4 & 20?
Explanation:
2 & 20 are in opposite sections of the periodic table. If you mean 2& 18 the element is Krypton or if you mean 4 & 20 the element is Strontium
What is the percent composition of nitrogen in a 2.57 g sample of Al(NO3)3?
Answer:
19.8% of Nitrogen
Explanation:
In the Al(NO₃)₃ there are:
1 atom of Al
3 atoms of N
And 9 atoms of O
The molar mass of Al(NO₃)₃ is:
1 Al * (26.98g/mol) = 26.98g/mol
3 N * (14g/mol) = 42g/mol
9 O * (16g/mol) = 144g/mol
26.98 + 42 + 144 = 212.98g/mol
We can do a conversion using these molar masses to find the mass of nitrogen is the sample, that is:
2.57g * (42g/mol / 212.98g/mol) =
0.51g N
Percent composition of nitrogen is:
0.51g N / 2.57g * 100
= 19.8% of Nitrogen
what special requirements would a helicopter rotor need to have in order to make a helicopter flight possible on the red planet.
Answer:
Explanation:
may u explain what u mean then i will be able to help u because i like knows this but what u mean will be better so i can tell u the right answer thanks have a good day
A camper pours 500 g of coffee, initially in a pot at 80 oC, into a 110-g aluminum cup initially at 30 oC. What is the final temperature? Assume that coffee has the same specific heat as water and that no heat is exchanged with the surroundings. (cwater=4.18 J/goC). (cAluminum=0.900J/g.C)
The final temperature : t=77.74 °C
Further explanationGiven
500 g coffee, t = 80 °C
110 g aluminum cup, t = 30 °C
Required
The final temperature
Solution
Q in = Q out
Q absorbed = Q released
Q aluminum cup = Q coffee
110 x 0.9 x (t-30)=500 x 4.18 x (80-t)
99t-2970=167200-2090t
2189t=170170
t=77.74 °C
11. Acids are described as being because they dissolve some metals.
Answer:
Corosive
Explanation:
CORRECT
Answer:
Corosive
Explanation:
Hope this will help
Calculate the molar concentration of a solution containing 433 grams of C6H12O6 in 82 milliliters of water. The molar mass of C6H12O6 is 180.156 g/mol
Answer:
29.27M
Explanation:
Molar concentration can be calculated using the formula;
Molar concentration (molarity) = number of moles ÷ volume
Mole = mass ÷ molar mass
Where;
Molar Mass of glucose (C6H12O6) = 180.156g/mol
Mass = 433g
Mole = 433/180.156
Mole = 2.40moles
Volume = 82mL
Since 1L = 1000mL
82mL = 82/1000
= 0.082L
Molar conc. = 2.40mol/0.082L
Molar conc. = 29.27M
How many c atoms are there in 5K2CO3
Answer:
8 atoms.
Explanation:
Write the name of CO
Answer:
cobalt
Explanation:
Ba(CN)2
What is the name of the compound?
Answer:
Barium cyanide
Explanation:
I don't no
The name of the compound Ba(CN)₂ is called barium cyanide.
The compound Ba(CN)₂ is called barium cyanide. It is a white crystalline solid that is soluble in water. Barium cyanide is a toxic compound and can be fatal if ingested. It is used in electroplating and other metallurgical processes.
The name of the compound is derived from the names of the elements that make up the compound. Barium is named after the Latin word for "heavy", and cyanide is named after the Greek word for "blue". The -ide suffix indicates that the compound is an ionic compound, with barium as the cation and cyanide as the anion.
The chemical formula for barium cyanide can be written in a few different ways. The most common way is to write it as Ba(CN)₂. This formula shows that there is one barium atom for every two cyanide atoms. The formula can also be written as BaCN₂, but this is less common.
To know more about compound here
https://brainly.com/question/34151797
#SPJ6
The element with the atomic mass of 12 amu, and 6 nuetrons: (E2) A (B3) (D4) O (14)
Answer:like my photo bc i like it
Explanation:
omg i look .........................................
determine the density of an object that is 25 cm long 10 cm wide and 2 cm high with a mass of 50 g
Answer:
[tex]\boxed {\boxed {\sf \rho= 0.1 \ g/cm^3 }}[/tex]
Explanation:
Density is found by dividing the mass by the volume.
[tex]\rho=\frac{m}{v}[/tex]
The mass is 50 grams, but we have to find the volume.
Assuming this is a solid rectangular object, we can use this formula for volume:
[tex]v=l*w*h[/tex]
The length is 25 centimeters, the width is 10 centimeters, and the height is 2 centimeters.
[tex]v= 25 \ cm * 10 \ cm * 2 \ cm[/tex]
[tex]v= 250 \ cm^2 * 2 \ cm[/tex]
[tex]v= 500 \ cm^3[/tex]
Now we know the mass and volume:
[tex]m= 50 \ g\\v= 500 \ cm^3[/tex]
Substitute the values into the formula.
[tex]\rho = \frac{50 \ g}{500 \ cm^3}[/tex]
[tex]\rho= 0.1 \ g/cm^3[/tex]
The density of the object is 0.1 grams per cubic centimeter.
Which of the following is an example of a chemical element a. Salt B.water c.sugar d.sodium
Answer:
the answer is sodium
Explanation:
hope this helps
8.The number of protons plus neutrons is represented by the
a.atomic number
b.mass number
c.atomic mass
d.isotope
Answer:
c.atomic mass
Explanation:
The total number of protons plus neutrons is called the atomic mass number for the atom.
What kinds of global disaster alerts and communication infrastructure can help mitigate the effects of natural disasters
Explanation:
Prior preparation is required in a location at risk of natural disasters, this includes a communication system and infrastructure aimed at protecting and educating society. Technology is extremely important for the prevention of natural disasters, through forecasting and monitoring systems it is possible to map and analyze the possible risks and anticipate them with the necessary solutions, such as removing a population from a certain location with a risk of drilling.
It is necessary for the population to be aware, understand the alerts and signals issued in case of risk and follow the guidelines of the trained authorities, in this way it is possible to mitigate the effects of natural disasters.
Na * 6.02 * 10^23 pls help an it got to include na
Answer:
6.02E23Na
Explanation:
you just convert the element to a decimal form
Ca+Cl2-->CaCl2 Then, write balanced half-reactions describing the oxidation and reduction that happen in this reaction.
Answer:
Oxidation half
Ca -----> Ca2+ +2elecyrons
Reduction half
Cl2 + 2electrons ------> 2Cl-
Explanation:
Select the correct answer.
Which phrase describes a polymer?
A.
a branching structure containing 10 carbon atoms and 22 hydrogen atoms
B.
a crystal containing many sodium ions and many fluoride ions
C.
a long chain of carbon atoms with hydrogen atoms attached to them
D.
a molecule containing six carbon atoms arranged in a ring structure
E.
a single atom of calcium bonded to two atoms of chlorine
C. a long chain of carbon atoms with hydrogen atoms attached to them.
Explanation:
Answer:
C.
a long chain of carbon atoms with hydrogen atoms attached to it
a train is traveling on a straight track. it travels 200 kilometers in 4 hours, what measure can you find with these values?
Answer:
200 km is a measure of distance 4 hours is a measure of time Hence you can measure rate of change, instaneous rate of change, linear change and distribution of timeUpdated: SpeedWhich statement best explains the type of bond that will form between two elements from group 6A in the model?
A. The two elements will form a covalent bond because both elements will share a single electron in order to have full outer shells
B. The two elements will form a covalent bond because both elements will share a pair of electrons in order to have full outer shells.
C. The two elements will form an ionic bond because one of the elements will donate one electron to the other element in order to have full outer shells.
D. The two elements will form an ionic bind because one of the elements will donate two electrons to the other elements in order to have full outer shells.
*Will give brainliest*
Answer:
D is the answer
Like my answer
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the correct option is option D.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
The two elements will form an ionic bind because one of the elements will donate two electrons to the other elements in order to have full outer shells.
Therefore, the correct option is option D.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2