Answer:2 seconds
Explanation:
why do you think people translate sound waves from compression waves to transverse waves ?
Answer:
Sound waves are translated into transverse waves to know the frequency, amplitude, wavelength etc of the waves.
Explanation:
They translate the sound waves to know the depth about that specific waves and translating it to transverse waves makes it easier.
Hope it helps :D
calculate the extra pressure when you are 10 meters under water. (density of water = 1000 kg/m3, g = 9.8 N/kg). Give a value only
Answer:
[tex]2.03\times 10^5\ Pa[/tex]
Explanation:
We need to find the extra pressure when you are 10 meters under water. The net pressure on us is given by :
[tex]P=P_o+\rho gh\\\\P=1.05\times 10^5+1000\times 9.8\times 10\\\\P=2.03\times 10^5\ Pa[/tex]
So, [tex]2.03\times 10^5\ Pa[/tex] is exerted on us at 10 m under water.
PLS HELP WITH THIS DENSITY QUESTIONS AND WHEN SHOWING STEPS PLS USE GRASS
Calculate the density of aluminum if you have a piece of aluminum that has a volume of 48.9 cm³.When the piece is measured it is found to have a mass of 132 g.
A small amount of copper is found to have a mass of 27 g. Calculate the density of copper if the volume of the sample is 3.0 cm³.
The volume of a piece of iron is 65 cm³. If the piece of iron has a mass of 512 g. Calculate the density of the sample of iron.
A stick of cedar wood has a mass of 1.2 kg. It has a volume of 3243 cm³ . What is the density of cedar wood?
Zinc has a density of 7.14 g/cm³. If you are given 50 g of zinc calculate the volume of the sample.
A block of aluminum occupies a volume of 15.0 mL and weighs 40.5 g. What is its density?
Mercury metal is poured into a graduated cylinder that holds exactly 22.5 mL. The mercury used to fill the cylinder weighs 306.0 g. From this Information, calculate the density of mercury.
What volume of silver metal will weigh exactly 2500.0 g. The density of silver is 10.5 g/cm³
Answer:
Explanation:
Density = mass/volume
132g/(48.9 cm³) = 2.7 g/cm³
(27 g)/(3 cm³) = 9 g/cm³
512 g/(65 cm³) = 7.9 g/cm³
1.2 kg/(3243 cm³) cm³ = 1200 g/(3243 cm³) = 0.37 g/cm³
How to calculate the refraction of light from air to water
Answer:
hope it would be helpful
what are the examples of non viscous liquid
[tex] \\[/tex]
Two isotopes of helium ( helium 3 and helium 4) show superfluidity whem they are liquified by cooling to a very low specific temperature. One isotope of rubidium and lithium posses this property at low temperature.
Hope It Helps!
what is the dimensional formula of thermal conductivity?
Answer:
The dimension of thermal conductivity is M1L1T−3Θ−1, expressed in terms of the dimensions mass (M), length (L), time (T), and temperature (Θ). Other units which are closely related to the thermal conductivity are in common use in the construction and textile industries.
Explanation:looked it up for ya
What is the kinetic energy of a 0.50 KG ball that is traveling at a speed of 40m/s
Answer:
0.4kjKE = 1/2 mv2
KE = 1/2 mv2 KE = 1/2 (0.50kg) (40m / s)
KE = 1/2 mv2 KE = 1/2 (0.50kg) (40m / s) 2 KE = 1/2 (0.50) (402)
KE = 1/2 mv2 KE = 1/2 (0.50kg) (40m / s) 2 KE = 1/2 (0.50) (402) KE = 0.5 x 0.50 x 402
KE = 1/2 mv2 KE = 1/2 (0.50kg) (40m / s) 2 KE = 1/2 (0.50) (402) KE = 0.5 x 0.50 x 402 KE = 400 J
KE = 1/2 mv2 KE = 1/2 (0.50kg) (40m / s) 2 KE = 1/2 (0.50) (402) KE = 0.5 x 0.50 x 402 KE = 400 JKE = 0.4 KJ
Answer:
K. E = 1/2MV²
K. E = 1/2 x 0.50kg x (40m/s)²
K. E = 1/4kg x 1600m²/s²
K. E = 400
A car travelling at 10 m/s has 75 kJ of KE. Calculate the car’s mass.
Will give brainliest
Answer:
[tex]k.e = \frac{1}{2} MV {}^{2} \\ 75 = \frac{1}{2} m10 {}^{2} \\ \frac{75}{100} = \frac{1}{2} m \\ \\ 0.75 \times 2 =m \\ m = 1.5kg[/tex]
the mass of car is 1.5kg
What are three types of electromagnetic waves that are used to transmit information? What types of devices are used to receive each type of wave?
Type of electromagnetic wave:
Receiver devices:
Answer:
Three types of electromagnetic waves, used to transmit various information
Explanation:
A form of energy waves having both electric & magnetic fields are Electromagnetic waves. Three types -
Radio Waves - These have longest wavelengths & transmit data through radio, satellites, radar .
Micro Waves - These have shorter wavelengths & are used in cooking appliances & predicting weather.
X rays - These have more short wavelength and can penerate soft tissues like skin & muscle, hence are used for medical examining
Answer:
Three types of electromagnetic waves that are commonly used to transmit information are:
Radio Waves:
Radio waves are used for transmitting radio signals, television signals, and wireless communication. They are received by devices such as radios, televisions, and mobile phones with radio receivers.
Microwaves:
Microwaves are used for various purposes, including satellite communication, microwave ovens, and wireless data transmission. They are received by devices such as microwave antennas, satellite receivers, and Wi-Fi routers.
Light Waves (Optical Waves):
Light waves, specifically in the form of optical waves, are used for fiber optic communication, which involves transmitting data through optical fibers. They are received by devices such as optical receivers, which convert the light signals back into electrical signals for processing.
Each type of wave requires specific devices to receive and interpret the transmitted information effectively.
9. CALCULATE: How much more power is used to move a weight of 500 N a distance of 20 m in 5 s than is used to move a weight of 1,000 N a distance of 30 m in 30 sec?
Answer:
work = 500*3 = 1500 J
1500J in 5 sec = 300 watts
Explanation:
Answer:
it is using the same power
Explanation:
it is using the same power because it has to move longer and a farther distance while the other one has double the power but less the distance
two homogeneous bodies of the same volume
Answer:
No, it is not necessary for them to have same mass.
Explanation:
Let both bodies have a density d1 and d2 respectively.
Since their volumes are equal V1 = V2
we know that, https://tex.z-dn.net/?f=%5Cfrac%7Bmass%7D%7Bvolume%7D
Hence, d1 = and d2 =
Taking the ratio of densities,we get
This implies that unless the bodies have same densities, the mass of the two bodies will not be same.
which types of landfrom would you prefer for living?why?
Answer:
Landforms affect where people build houses and communities. Many people live on plains because it is easy to travel and to farm on flat land. Other people live in valleys, which are the land between mountains or hills. The soil in valleys is good for farming.
Answer: lake
Explanation: it would almost always be cool. And cool things are inside!
A _____ is a device that uses a smaller current to control a larger current. fuse rheostat relay switch circuit breaker
Answer:
relay switch
Explanation:
relay switch is the answer
Select the correct answer.
The particles in a mechanical wave are moving back and forth in the same direction the wave is traveling in. What’s the shape of the wave?
double transverse
longitudinal
oval-shaped
transverse
Answer: Longitudinal
Explanation:
A 40.0 kg box is placed on a 2.00 m tall shelf. If the box falls off the shelf, what is its kinetic energy as it strikes the ground?
In each of the following cases, determine where the car has no
acceleration ?
1. A car shortly after a stoplight turns green
2. A car approaching a red light
3. A car with the cruise control set at 80 km/h
4. A car turning a curve at a reducing the speed
Help pls
Answer:
1.after
2.approaching
3.cruise
4.turning
Explanation:
if wrong sorry
Answer this And you will get The brainiest
Answer:
see below
Explanation:
let one direction be negative and the other direction be positive
so
right = positive
left = negative
up = positive
down = negative
thus
d) -80 + 100 = 20 N
e) 35 - 55 = -20 N
hope this helps, please mark it brainliest
In what way could a random mutation provide an organism with
an advantage?
Answer:
They are called beneficial mutations. They lead to new versions of proteins that help organisms adapt to changes in their environment. Beneficial mutations are essential for evolution to occur. They increase an organism's changes of surviving or reproducing, so they are likely to become more common over time.
Explanation:
Heat can be transferred through conduction, convection, and radiation. What is necessary in order for heat to be transferred by conduction?
A.
Heat must be transferred through space.
B.
Heat must be transferred in the form of currents.
C.
The substances must be liquids or gases.
D.
The objects must be in direct contact with one another.
it would be..... C
sorry if I am wrong I tryed to think, At least I try!
Which pair of element types is most likely to share valence electrons in a
covalent bond?
A. Two metals
B. A metal and a nonmetal
C. Two nonmetals
D. A metal and a metalloid
Answer:
It's C, you guys!!!!
Explanation:
001)
9. A ball is rolled at a velocity of 12 m/s. After 36 seconds, it comes to a stop. What is the acceleration of the ball?
Answer:
0.33333333333
Explanation:
a = v/t
= 12/36
= 1/3
= 0.3333
Answer:
3
Explain
36/12
2.5 x 103 kilogram truck with rubber tires moves through a 120 meter radius turn on a dry asphalt surface.
a. Determine the force of friction acting on the truck's tires during the turn.
b. Calculate the maximum speed with which the truck could have made this turn.
Answer:
a. The friction force acting on the truck's tires during the turn, is approximately 20,875 N
b. The maximum velocity with which the truck could make the bend is approximately 31.654 m/s
Explanation:
The given parameters of the truck are;
The mass of the truck, m = 2.5 × 10³ kg
The tire material = Rubber
The radius of the turn the through which the truck moves = 120 meters
The material and condition of the surface = Dry asphalt
a. The coefficient of friction of rubber tires on dry asphalt, μ ≈ 0.85 (researchgate (internet source))
The weight of the truck, W = m × g
Where;
m = The mass of the truck = 2.5 × 10³ kg
g = The acceleration due to gravity = 9.8 m/s²
∴ W = 2.5 × 10³ kg × 9.8 m/s² = 24,500 N
The force of friction acting on the tires, [tex]F_f[/tex] = W × μ
∴ [tex]F_f[/tex] = 24,500 N × 0.85 ≈ 20,875 N
The friction force acting on the truck's tires during the turn, [tex]F_f[/tex] ≈ 20,875 N
b. The centrifugal force the truck observes while turning through the bend, 'F', is given as follows;
F = m·v²/r
Therefore, the maximum velocity with which the truck could make the bend, 'v', is given when fiction force, '[tex]F_f[/tex]', is equal to the centripetal force, F
When [tex]F_f[/tex] = F, we have;
W × μ = m·v²/r
∴ 20,875 N = 2.5 × 10³ kg × v²/(120 m)
∴ v² = 20,875 N × (120 m)/(2.5 × 10^3 kg) = 1002 m²/s²
v = √(1002 m²/s²) ≈ 31.654 m/s
The maximum velocity with which the truck could make the bend, v ≈ 31.654 m/s
According to this question;
The mass of the truck (m) = 2.5 × 10³ kgThe radius of the turn = 120mThe coefficient of friction of rubber tires on dry asphalt, μ ≈ 0.85QUESTION 1:
Weight of the truck (W) = m × gWhere;
m = mass of the truck = 2.5 × 10³ kgg = acceleration due to gravity = 9.8 m/s²W = 2.5 × 10³ kg × 9.8 m/s² = 24,500 NThe force of friction acting on the tires, = W × μ= 24,500 N × 0.85 ≈ 20,875 NThe force of friction acting on the truck's tires during the turn = 20,875 NQUESTION 2:
Centrifugal force of the truck can be calculated as follows: F = mv²/rHowever, force of friction (Ff) is equal to centripetal force (F). That is;W × μ = m·v²/r20,875N = 2.5 × 10³ kg × v²/(120 m)v² = 20,875 × 120/2.5 × 10³ = 1002 m²/s²v = √1002 = 31.654m/sThe maximum velocity with which the truck could make the turn = 31.654 m/s.Learn more about force of friction at: https://brainly.com/question/4230804?referrer=searchResults
Write down the equation that links energy transferred, power and time.
Answer:
Power = Energy transferred / time
Explanation:
Answer all of this questions and you will get the brain list
see below
Explanation:
let One Direction to be the positive and the other direction be negative
let right = positive
left = negative
up = positive
down = negative
a) 100 - 50 = 50N
b) 500 - 330 = 170N
c) 70 - 70 = 0 N
hope this helps
please mark it brainliest
1. What is the velocity of an 250-kg that has 6,250 J of energy?
Please help
Explanation:
KE = 1/2mv^2
6,250 J =1/2(250kg) v ^2
6250 J = 125kgv^2
125kg. 125kg
v =
[tex] \sqrt{50} [/tex]
10. CALCULATE: Find the amount of power used in
each of the following examples. Show your
calculations.
a. You use a force of 10 N to move a box
100 m in 10 seconds.
b. An athlete lifting weights does 900 J of
work in 1 second.
c. A truck does 30,000 J of work in
15 seconds.
d. A furniture mover uses a force of 150 N to
push a large trunk 5 m across the floor in
5 seconds.
Answer:
Please find attached pdf
Explanation:
1. If you were the organizer of this dance event, are you favor in moving the date on May? Why
or why not?
Answer:
I am in favor of the dance event being in may. Because it is nice weather outside, more people will decide to come and spend their time there. It is also light in the evening in may, meaning that you could have the dance event at any time, and younger people will still feel safe at night, meaning their parents will be more open to lwtting kids go.
help me pls
really struggling with dat
Two forces are acting on an object.
One force is 6 N forward.
The other force is 8 N backward.
What is the net force acting on the object?
- 14 N forward
- 2 N backward
- 2 N forward
Answer:
8N -6N = 2N
Explanation:
opposite forces
Answer:
2N backward
Explanation:
6 - 8 = -2
because there is more force backwards than forwards
If an object is placed between a convex lens and its focal point, which type of image will be produced?
A.
real, inverted, and magnified
B.
real, upright, and smaller
C.
virtual, inverted, and magnified
D.
virtual, upright, and magnified
E.
real, inverted, and smaller
Answer:
A
Explanation:
Beacuse it has 2 angles
Answer:
b I do believe sorry if I'm wrong