Two customers, A and B, are due to arrive at a lawyer's office during the same hour from 10:00 to 11:00. Their actual arrival times, denoted by X and Y respectively, are independent of each other and uniformly distributed during the hour.
(a) Denote the time as X = Uniform(10, 11).
Then, P(X > 10.45) = 1 - P(X <= 10.45) = 1 - (10.45 - 10) / 60 = 0.25
Similarly, P(Y > 10.45) = 0.25
Then, the probability that both customers arrive within the last 15 minutes is:
P(X > 10.45 and Y > 10.45) = P(X > 10.45) * P(Y > 10.45) = 0.25 * 0.25 = 0.0625.
(b) The probability that A arrives first is P(A < B).
This is equal to the area under the diagonal line X = Y. Hence, P(A < B) = 0.5
The probability that B arrives more than 30 minutes after A is P(B > A + 0.5) = 0.25, since the arrivals are uniformly distributed between 10 and 11.
Therefore, the probability that A arrives first and B arrives more than 30 minutes after A is given by:
P(A < B and B > A + 0.5) = P(A < B) * P(B > A + 0.5) = 0.5 * 0.25 = 0.125.
(c) Find the probability that B arrives first provided that both arrive during the last half-hour.
The probability that both arrive during the last half-hour is 0.5.
Denote the time as X = Uniform(10.30, 11).
Then, P(X < 10.45) = (10.45 - 10.30) / (11 - 10.30) = 0.4545
Similarly, P(Y < 10.45) = 0.4545
The probability that B arrives first, given that both arrive during the last half-hour is:
P(Y < X) / P(Both arrive in the last half-hour) = (0.4545) / (0.5) = 0.909 or 90.9%
Therefore, the probability that B arrives first provided that both arrive during the last half-hour is 0.909.
Learn more about customers
https://brainly.com/question/31828911
#SPJ11
The Flemings secured a bank Ioan of $320,000 to help finance the purchase of a house. The bank charges interest at a rate of 3%/year on the unpaid balance, and interest computations are made at the end of each month. The Flemings have agreed to repay the in equal monthly installments over 25 years. What should be the size of each repayment if the loan is to be amortized at the end of the term? (Round your answer to the nearest cent.)
The size of each repayment should be $1,746.38 if the loan is to be amortized at the end of the term.
Given: Loan amount = $320,000
Annual interest rate = 3%
Tenure = 25 years = 25 × 12 = 300 months
Annuity pay = Monthly payment amount to repay the loan each month
Formula used: The formula to calculate the monthly payment amount (Annuity pay) to repay a loan amount with interest over a period of time is given below.
P = (Pr) / [1 – (1 + r)-n]
where P is the monthly payment,
r is the monthly interest rate (annual interest rate / 12),
n is the total number of payments (number of years × 12), and
P is the principal or the loan amount.
The interest rate of 3% per year is charged on the unpaid balance. So, the monthly interest rate, r is given by;
r = (3 / 100) / 12 = 0.0025 And the total number of payments, n is given by n = 25 × 12 = 300
Substituting the given values of P, r, and n in the formula to calculate the monthly payment amount to repay the loan each month.
320000 = (P * (0.0025 * (1 + 0.0025)^300)) / ((1 + 0.0025)^300 - 1)
320000 = (P * 0.0025 * 1.0025^300) / (1.0025^300 - 1)
(320000 * (1.0025^300 - 1)) / (0.0025 * 1.0025^300) = P
Monthly payment amount to repay the loan each month = $1,746.38
Learn more about Loan repayment amount and annuity pay :https://brainly.com/question/23898749
#SPJ11
Part C2 - Oxidation with Benedict's Solution Which of the two substances can be oxidized? What is the functional group for that substance? Write a balanced equation for the oxidation reaction with chr
Benedict's solution is commonly used to test for the presence of reducing sugars, such as glucose and fructose. In this test, Benedict's solution is mixed with the substance to be tested and heated. If a reducing sugar is present, it will undergo oxidation and reduce the copper(II) ions in Benedict's solution to copper(I) oxide, which precipitates as a red or orange precipitate.
To determine which of the two substances can be oxidized with Benedict's solution, we need to know the nature of the functional group present in each substance. Without this information, it is difficult to determine the substance's reactivity with Benedict's solution.
However, if we assume that both substances are monosaccharides, such as glucose and fructose, then they both contain an aldehyde functional group (CHO). In this case, both substances can be oxidized by Benedict's solution. The aldehyde group is oxidized to a carboxylic acid, resulting in the reduction of copper(II) ions to copper(I) oxide.
The balanced equation for the oxidation reaction of a monosaccharide with Benedict's solution can be represented as follows:
C₆H₁₂O₆ (monosaccharide) + 2Cu₂+ (Benedict's solution) + 5OH- (Benedict's solution) → Cu₂O (copper(I) oxide, precipitate) + C₆H₁₂O₇ (carboxylic acid) + H₂O
It is important to note that without specific information about the substances involved, this is a generalized explanation assuming they are monosaccharides. The reactivity with Benedict's solution may vary depending on the functional groups present in the actual substances.
To know more about Benedict's solution refer here:
https://brainly.com/question/12109037#
#SPJ11
a) perform a linear search by hand for the array [20,−20,10,0,15], loching for 0 , and showing each iteration one line at a time b) perform a binary search by hand fo the array [20,0,10,15,20], looking for 0 , and showing each iteration one line at a time c) perform a bubble surt by hand for the array [20,−20,10,0,15], shouing each iteration one line at a time d) perform a selection sort by hand for the array [20,−20,10,0,15], showing eah iteration one line at a time
In the linear search, the array [20, -20, 10, 0, 15] is iterated sequentially until the element 0 is found, The binary search for the array [20, 0, 10, 15, 20] finds the element 0 by dividing the search space in half at each iteration, The bubble sort iteratively swaps adjacent elements until the array [20, -20, 10, 0, 15] is sorted in ascending order and The selection sort swaps the smallest unsorted element with the first unsorted element, resulting in the sorted array [20, -20, 10, 0, 15].
The array is now sorted: [-20, 0, 10, 15, 20]
a) Linear Search for 0 in the array [20, -20, 10, 0, 15]:
Iteration 1: Compare 20 with 0. Not a match.
Iteration 2: Compare -20 with 0. Not a match.
Iteration 3: Compare 10 with 0. Not a match.
Iteration 4: Compare 0 with 0. Match found! Exit the search.
b) Binary Search for 0 in the sorted array [0, 10, 15, 20, 20]:
Iteration 1: Compare middle element 15 with 0. 0 is smaller, so search the left half.
Iteration 2: Compare middle element 10 with 0. 0 is smaller, so search the left half.
Iteration 3: Compare middle element 0 with 0. Match found! Exit the search.
c) Bubble Sort for the array [20, -20, 10, 0, 15]:
Iteration 1: Compare 20 and -20. Swap them: [-20, 20, 10, 0, 15]
Iteration 2: Compare 20 and 10. No swap needed: [-20, 10, 20, 0, 15]
Iteration 3: Compare 20 and 0. Swap them: [-20, 10, 0, 20, 15]
Iteration 4: Compare 20 and 15. No swap needed: [-20, 10, 0, 15, 20]
The array is now sorted: [-20, 10, 0, 15, 20]
d) Selection Sort for the array [20, -20, 10, 0, 15]:
Iteration 1: Find the minimum element, -20, and swap it with the first element: [-20, 20, 10, 0, 15]
Iteration 2: Find the minimum element, 0, and swap it with the second element: [-20, 0, 10, 20, 15]
Iteration 3: Find the minimum element, 10, and swap it with the third element: [-20, 0, 10, 20, 15]
Iteration 4: Find the minimum element, 15, and swap it with the fourth element: [-20, 0, 10, 15, 20]
To know more about Iteration refer to-
https://brainly.com/question/31197563
#SPJ11