You have two pure substance that you cannot identify. Each sample is solid at room temperature. Describe at least five steps in the appropriate sequence that you would take to be able to identify the substance. ​

Answers

Answer 1

Answer:

pue like ad

Explanation:

Answer 2

For the two pure substance that you cannot identified , The steps taken in the right sequence are:

When two pure substance are places before you. you have to visually anaylse the sample, note the various colors that they have. It can tell you if it's an anions or cations.

You can use reactants to precipitate the cations of the sample you have

We then add a reactant to the sample and you did not see any precipitate, it corresponds to any of the elements or compound. If you do not see a precipitate, you can add other reactant.

You then observe the color of this precipitate. example if the color changes to green, it will tell you that the substance is Ni(OH)₂ etc.

One can also find out through the melting and boiling point of the two substances.

Pure substance are regarded as substance that does not have impurities. one common way of finding out the purity of a substance is by its melting and boiling point determination.

Lear more from

https://brainly.com/question/2325398


Related Questions

What are five minerals found on space rocks

Answers

Answer:

oxygen, silicon, iron, calcium, sodium

Explanation:

these are all found in space rocks known as meteorites. hope this helps :)

What are the starting substances (molecules) in a chemical equation called?

Answers

Answer:

A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.

Which statement best describes why a chemical property change is different from a physical change?

A. A chemical change results in a different state of matter; and a physical change results in a new substance being formed.

B. A chemical change results in a new substance being formed; whereas, a physical change will result in a different state of matter.

C. A chemical change is used by scientists to create new substances, and a physical change happens naturally.

D. A chemical change is used to identify characteristics of a substance, and a physical change identifies the behavior of a substance when in a reaction.

Answers

Answer:

B

Explanation:

a chemical change is making a new substance and physical change with a result in a different state of matter:)

Sweat is made up of all EXCEPT what?
*
A.Sugar
B.Salt
C.Urea
D.Urine

Answers

D, Urine.

Just google what sweat is made of and it gives you all of the answers except for urine. Also you’d probably smell really bad if your sweat had urine in it. Hope this helps! :)

What are phytoplankton and what percentage of oxygen do they produce? (ASAP)

Answers

Answer:

They are plants also known as plankton and they produce about 80-85% of the world's oxygen.

Explanation:

Scientists who are investigating what has happened over the years to the people who were exposed to radiation during the 1986 Chernobyl nuclear disaster are conducting what type of study

Answers

Answer:

Observational study

Explanation:

An investigation of what happened over the years to the people who were exposed to radiation during the 1986 Chernobyl nuclear disaster would be termed an observational study because it will require observing subjects and finding out if there is a kind of correlating factor in the subjects that could indicate the level of exposure to the nuclear radiation.

There are basically two types of research studies:

1. Observational studies

2. Experimental studies

Observational studies involve just the observation of subjects and trying to find out some correlation factors. This kind of study could be prospective when it deals with what could happen in the future based on certain factors or retrospective when it considers what has already happened. An observational study can be cross-sectional, case-only, case-control, or cohort study.

Experimental studies are also referred to as randomized or controlled trial studies. Here, subjects are grouped and each group receives a different treatment in order to isolate the effect of a particular factor or variable relating to the treatment.

Explain your thoughts on whether or not using solely IR is a good method to make positive IDs of chemicals.

Answers

Answer:

No, IR should not soely be used to identify molecules

Explanation:

IR is a method that identifies the functional groups in a molecule by deducing the frequency of stretching and vibration of bonds. Each peculiar type of bond has a frequency for the vibration of each bond represented on the IR spectrum.

However, one method is never enough to identify a compound. A combination of methods must always be used to clear up ambiguities arising from overlapping IR frequencies. Also,  interpretation of the nuanced peaks of the fingerprint region in IR spectra is quite challenging and only gives a fair idea of the functional groups present in the compound.

Therefore other methods such as NMR, UV-VISIBLE etc should also be involved in the identification of compounds.

0.1400 mole of sucrose, C12H22O11, contains ________ moles of C.
can you show me the formula and the correct format

Answers

Answer:

it has 12 carbon atoms and 22 hydrogen atoms and 11 oxygen atoms

Explanation:

Determine the density of CO2 gas at STP

Answers

Answer:

the density of CO2 gas at STP is 1.96 g/l.

1. A baseball pitcher won 75% of the games he pitched. If he pitched 43 ballgames, how many games

did he win?

Answers

Answer:

He won 32 games.

Explanation:

Another way of expressing 75% is 75/100.

To calculate how many games the baseball pitcher won, we multiply the total of games played (43, in this case) by the percent won:

43 * 75/100 = 32.25 ≅ 32

So the baseball pitcher won 32 games.

Identify at least 5 pure substance found in nature,in the supermarket, grocery storeand even at your home.use the table below to explain your answer based on appearance, separating technique, boiling and melting point.​

Answers

Answer:

Explanation:

1) Pure substance: Water (found at home)

Appearance: It is homogeneous since it is a single substance that appears as liquid. Homogeneous is when the components of a substance are in a single phase

Separating technique: It's component cannot be separated by physical means

Boiling point: Water boils at 100 °C

Melting point: Water melts/freezes at 0°C

2) Pure substance: Table salt (found at home)

Appearance: It is also homogeneous as it is a single substance that is solid. Separating technique: It's component cannot be separated by physical means

Boiling point: Water boils at 1,465 °C

Melting point: Water melts/freezes at 801 °C

3) Pure substance: Butter (found at home and grocery store)

Appearance: It is homogeneous even though it contains different components

Separating technique: It's component can be separated by physical means since butter is an emulsion of fat in water. The 15% water content can be evaporated/distilled out at 100 °C

Boiling point: Butter starts boiling at about 110-120 °C

Melting point: It melts at about 37 °C

4) Pure substance: Candle (wax) (found at home and grocery store)

Appearance: It is homogeneous

Separating technique: It's component cannot be separated by physical means

Boiling point: It starts boiling around 370 °C

Melting point: It melts at about 37 °C

5) Pure substance: table sugar/sucrose (found at home, grocery stores and in supermarkets)

Appearance: It is homogeneous

Separating technique: It's component cannot be separated by physical means

Boiling point: It starts boiling around 697 °C

Melting point: It melts at about 186 °C

A pure substance is an homogeneous material, having a composition, and

properties that are consistent through out the material.

The chemical properties of a pure substance are defined, such as the

products of its reaction can be predictable.

A chemical is pure when it consist of a single type of particle such as an

element, a molecule or a compound.

The five pure substances are presented as follows;

[tex]\displaystyle\begin{tabular}{|l|l|l|l|l|}\underline{Pure \ Substances}&\underline{Appearance}&\underline{Separaing Tech}&\underline{Boiling \ Point}&\underline{Melting \ point}\\1. Diamond&Translucent \ solid&Inseparable&3550^{\circ}&4830^{\circ}\\2. Table \ salt&White\ crystals&Insepble&801^{\circ}&1413^{\circ}\\3. Water&Tran parent \ liquid&Insepble&0^{\circ}&100^{\circ}\\4. Sugar&Whilte \ crystals&Heating&Decomposes&186^{\circ}\\5. Gold&Yellowish \ metal&Inseparable& 2700^{\circ}&1064^{\circ}\end{array}[/tex]

Learn more here:

https://brainly.com/question/18349770

2. Molecular solutions do not conduct electricity because they contain: *
(1 Point)​

Answers

Because the molecular solutions have low melting and boiling points, and do not conduct electricity.

The ions are able to move freely from one place to another. So that they conduct electricity. But the molecular solutions does not electricity.

What is a molecular solution?

The molecular solution is composed of molecules and consists of non - metallic atoms. These atoms are held together by the covalent bonds. The flow of charged particles is responsible for the conduction of electricity. If there is no flow of electrons or ions then there will be no electricity.

In the molecular solutions, the molecules present are not dissociated into respective ions. Since the molecules are not converted into the charged particles no electricity is produced.

A molecular solution is regarded as a non-electrolyte which does not contain ions. But electrolytes are dissociated into ions and thereby conducts electricity. So all electrolytes are good conductors of electricity.

Thus molecular solution does not contain ions.

To know more about solution, visit;

https://brainly.com/question/29058690

#SPJ6

How does the density and distribution of your “stars” change as the balloon expands?

Answers

Answer:

The Universe is constantly expanding and as it expands the stars and objects in space move farther apart, just like the points on the balloon when air is blown into it. Density and distribution of "stars" as the balloon expands because when volume increases the density will increase.

Hope this Helps

Suppose the current flowing from a battery is used to electroplate an object with silver. Calculate the mass of silver that would be deposited by a battery that delivers 1.65 A·hr of charge.

Answers

Answer:

m = 0.00659 kg = 6.59 g

Explanation:

From Faraday's Law of Electrolysis, we know that:

m = ZQ

where,

m = mass of silver deposited = ?

Q = charge supplied = (1.65 A-hr)(3600 s/1 hr) = 5940 C

Z = electrochemical equivalent of silver = 1.18 x 10⁻⁶ kg/C

Therefore,

m = (1.11 x 10⁻⁶ kg/C)(5940 C)

m = 0.00659 kg = 6.59 g

The mass of silver that would be deposited by a battery is 6.65 grams

The precipitation of Ag requires the removal of one electron. The reduction process for silver electrode at the cathode is as follows:

[tex]\mathbf{Ag^+ + e^- \to Ag(s)}[/tex]

The current flowing in the battery = 1.65 A = 1.65 C/sThe time at which the current is flowing = 1 hr = 3600sec

The charge Q = Current (I) × time (t)Charge Q = 1.65 C/s × 3600 sCharge (Q) = 5940 C

In one mole of an electron, the charge carried = 96500 C

Recall that:

The atomic mass of silver (Ag) = 108 g

The mass of silver that would be deposited in a 5940 C can be computed as:

[tex]\mathbf{=5940\ C \times \dfrac{108 \ g }{96500 \ C}}[/tex]

= 6.65 grams

Learn more about electrodes here:

https://brainly.com/question/17060277?referrer=searchResults

How much water must be added to 424 mL of 0.189 M HCl to produce a 0.140 M solution?

Answers

Answer:

Volume of water added = 148.4 mL

Explanation:

Given data:

Initial volume = 424 mL

Initial molarity = 0.189 M

Final molarity = 0.140 M

Volume of water added = ?

Solution:

Formula:

M₁V₁  =   M₂V₂

0.189 M×424 mL = 0.140 M×V₂

V₂ = 0.189 M×424 mL /0.140 M

V₂ = 80.136 M.mL / 0.140 M

V₂ = 572.4 mL

Final volume of solution is  572.4 mL.

Volume of water added = Final volume - initial volume

Volume of water added = 572.4 mL - 424 mL

Volume of water added = 148.4 mL

Given the following balanced equation, determine the rate of reaction with respect to [Cl2]. If the rate of Cl2 loss is 4.64 × 10-2 M/s, what is the rate of formation of NOCl? 2 NO(g) + Cl2(g) → 2 NOCl(g)

Answers

Answer:

[tex]r_{NOCl}=9.28x10^{-2}M[/tex]

Explanation:

Hello!

In this case, given the balanced chemical reaction:

[tex]2 NO(g) + Cl_2(g) \rightarrow 2 NOCl(g)[/tex]

Since there is 1:2 mole ratio between chlorine and NOCl, based on the rate proportions, we can write:

[tex]\frac{1}{-1}r_{Cl_2} =\frac{1}{2}r_{NOCl}[/tex]

It means that for the formation of NOCl, we obtain:

[tex]r_{NOCl}=\frac{2}{-1}r_{Cl_2} \\\\r_{NOCl}=\frac{2}{-1}(-4.64x10^{-2}M)\\\\r_{NOCl}=9.28x10^{-2}M[/tex]

Notice that chlorine is disappearing, which means its rate is negate.

Best regards!

A graduated cylinder initially has 32.5 mL of water in it. After a 75.0 g piece of lead (Pb) is added to the graduated cylinder, the water level rises to the 39.1 mL mark. What is the the volume of the piece of lead.

Answers

Answer:

39.1-32.5 and you will find your answer it always like that, you subtract your starting point from your ending point

Explanation:

The volume of the piece of lead is 6.6 mL

From the question given above, the following data were obtained:

Volume of water = 32.5 mLMass of lead (Pb) = 75 gVolume of water + Lead = 39.1 mLVolume of lead =?

The volume of the lead can be obtained as follow:

Volume of lead = (Volume of water + Lead) – (Volume of water)

Volume of lead = 39.1 – 32.5

Volume of lead = 6.6 mL

Therefore the volume of the lead is 6.6 mL

Learn more about density: https://brainly.com/question/7622627

Submit Test
Question 10 of 12- POS
GR8 Sci U03 USA FY21 Question: 1-10
Hannah added a silvery white metal to a beaker of cold water and noticed that gas bubbles were given off and a different substance formed. When she repeated the activity with hot water she noticed the gas bubbles were
released much more rapidly. Which statement best explains why the reaction occurred faster in hot water?
M

Answers

The correct answer is Hot water increases the collision rate of molecules, causing the reaction to occur faster.

Explanation:

Temperature is directly related to the kinetic energy or movement of molecules in a substance. In this context, a higher temperature leads to more kinetic energy or more collision between molecules. At the same time, a chemical reaction involves molecules of two or more substances colliding and creating bonds to form new substances. This implies an increase in temperature means molecules colliding faster, new substances forming in a shorter time, and therefore a faster chemical reaction. According to this, the first answer is correct.

ammonia is______a base

Answers

Answer:

Ammonia is moderately a base

Ammonia is a Moderately base

PLEASE HURRY WILL GIVE BRAINLEST IF ANSWERED CORRECTLY
which separation method would be most successful in separating the components of a homogeneous mixture

screening
evaporation
centrifugation
magnetic separation

Answers

Answer:

Evaporation is a technique used to separate out homogeneous mixtures where there is one or more dissolved salts.

Explanation:

Hope this helps :)

who established the two important laws of chemical combination combination state them​

Answers

Answer:

Antoine Lavoisier

1) Law of Conservation of Mass

French chemist, Antoine Lavoisier in 1789, studied this law. This law states that “In all physical and chemical changes, the total mass of the reactants is equal to that of the products” or “Mass can neither be created nor destroyed.”

Cells pump definition

Answers

Answer:

Pumps also called transporters, are transmembrane proteins that actively move ions and/or solutes against a concentration or electrochemical gradient across biological membranes.

which have
different numbers of electrons?

Answers

Answer:

These are called isotopes. They have the same number of protons (and electrons), but different numbers of neutrons. Different isotopes of the same element have different masses. Mass is the word for how much substance (or matter) something has.

How are changes of state different from chemical change?

Answers

Question:

How are changes of state different from chemical change?

Answer:

Physical changes alter only the size, shape, form or matter state of a material. Water boiling, melting ice, tearing paper, freezing water and crushing a can are all examples of physical changes.

On the other hand, chemical changes are a bit different. In a chemical change, a new substance is formed.

Answer:

Chemical change happens when a substance changes they molecular structure, it often involves change in color (rusting iron), transfer of energy (copper smelting), or gas bubbling.

Changes of state is a physical change. An example is ice, it melts to create water. Water then can be freezed back to ice. Water is still H2O in both states(solid/liquid) Dissovling is another example. You can dissolve salt in water and can separate it by evaporating water and leaving the salt behind.

Explanation:

A 2kg metal cylinder is supplied with 1600J of energy to heat it from 5*C to 13*C. What is the SHC of the metal?

Answers

Answer:

100Jkg/°C

Explanation:

Given parameters:

Mass of metal  = 2kg

Amount of heat energy  = 1600J

Initial temperature  = 5°C

Final temperature = 13°C

Unknown:

Specific heat capacity of the metal  = ?

Solution:

Specific heat capacity of a body is the amount of heat needed to raise the temperature of unit mass of a body by 1°C.

  H  = m x C x (T₂ - T₁ )

H is the amount of heat

m is the mass

C is the unknown specific heat capacity

T is the temperature

     Insert the parameters and solve;

  1600 = 2 x C x (13 - 5)

   1600  = 16C

        C = 100Jkg/°C

Match Term Definition
Pure substance A) Liquid homogeneous mixture in which the solute is distributed evenly within the solvent
Heterogeneous B) Mixture that has its different components mixed evenly within the substance
Homogeneous C) Mixture that has its different components mixed unevenly within the substance
Solution D) Consists of a single element or type of compound

Answers

Answer:

b

Explanation:

this should help

an electric current causes water to be transformed into hydrogen and oxygen gasses a physical change or a chemical change

Answers

physical change because ther is force which is the electric current

A gas sample in a balloon contains 4.0 moles of gas at a particular pressure, volume and temperature. If your balloon springs a leak and the volume decreases to 1/2 of the original amount before you can plug the leak, how many moles of gas have you lost (temperature and pressure remain the same)?

Answers

Answer:

Explanation:

When volume of gas is V , pressure is P and temperature is T , if n be number of moles of gas

PV / RT = n , R is universal gas constant .

When volume becomes .5 V , pressure P and temperature T

number of moles = Px .5 V / RT = .5 PV / RT = .5 n

Number of moles of gas becomes half .

so 4 moles becomes  2 moles

No of moles lost = 4 - 2 = 2 moles.

Which of the following grouping contains only representative elements?
A. Na, Co, S
B. Ni, Ga, Zn
c. AI, Mg, LÍ
D. CI, O, Cd

Answers

Answer:

C

Explanation:

Al=Aluminum

Mg=Magnesium

PLS HELP 35 POINTS I WILL GIVE BRAINEST

Answers

Answer:

Just count all the different elements like what elemets are in there and you have to identify the number of elemenst

Explanation:

for example H20 and a chemical for example thats two so you identofy which elelments are in there doesnt matter if thered multiple of it all its asking is what id the number of elemts there meaning like one or 2 mayne six different elements

Other Questions
In principle, when you fire a rifle, the recoil should push you backward. How big a push will it give? Let's find out by doing a calculation in a very artificial situation. Suppose a man standing on frictionless ice fires a rifle horizontally. The mass of the man together with the rifle is 70 kg, and the mass of the bullet is 10 g. If the bullet leaves the muzzle at a speed of 500 m/s, what is the final speed of the man? which line slope has 1 2. What type of words are oftenconfused with contractions?O apostrophesO conjunctionsO possessives? last season, your favorite basketball team won 20 games. So far this season, your favorite basketball team has won 31 games. What is the percent change in the number of games that your favorite team won from last season to this season? Why does Mr. Dussel think the Franks had escaped to Switzerland?There was a crumpled paper with an address found in their trash.The Franks had told the maid they were going to Switzerland.He assumed theyd gone there because Mr. Frank was not at work.Anne's friend, Jopie, told everyone at school that they left the country.(Diary of Anne Frank) 32Show gred116-541 2345 63 -2 -111-5-6- x2. onsin - cos - tan-+ - X + / +log-e? 10-10nShow less PLEASE HELP!! Serious answers only please!!Use the expression 9i+2(7+3i) to answer this question!Which property or properties should you use to simplify this expression?Apply those properties to each term ITS URGENT ILL GET GROUNDED IF I DONT GET THIS DONE PLEASE HELP Avery states that the graph of g is the same as the graph of f with everypoint shifted vertically. Cindy states that the graph of g is the same as thegraph of f with every point shifted horizontally.f(x)=2x+1g(x)=2x+3 Give an argument to support Averys answer Give an argument to support Cindys statement How many chromosomes do humans have in each cell?A. 46 pairs, total of 92B. 10 pairs, total of 20C. 22 pairs, total of 44D. 23 pairs, total of 46 do any body know this need help over here Another Question help these are due soon!!!!!! In a Petri dish there are currently 1,235 bacteria. The growth rate of bacteria is 3.25% How many bacteria will be there in the dish after 5 hours Urgent !!!Select the correct answer.The domain, range, and x-intercept of a one-to-one function are shown. Answer these questions by the following 6 U.S. Presidents: 1. George Washington 2. John Adams 3. Thomas Jefferson 4. James Madison 5. James Monroe6. Andrew Jackson Here are the questions you need to answer for each President. 1. What is his Political Party?2. What is his Home State?? 3. How many years did he serve as president?? 4. What are some personal characteristics about this President?? 5. What were his precedents, accomplishments & historical events?? (THIS IS DUE BY 3:00) In this diagram where is the line of reflection? What is a number that could be placed in the blank to complete this set from least to greatest?2/5, 1/2,----,6/8 According to the author, Ronald Takaki, what originally separated the racialgroups? Tell me why Mr Shue should have went to jail. 14. Which alphabet letters are different from the English alphabet(5 Points), II, rr., chO 1, n. i, ya, b, ch, a What is the solution to -2( 1 - 4x ) = 3x + 8