You are watching an object that is moving in SHM. When the object is displaced 0.600 m to the right of its equilibrium position, it has a velocity of 2.20 m/s to the right and an acceleration of 8.40m/s2 to the left.
How much farther from this point will the object move before it stops momentarily and then starts to move back to the left?

Answers

Answer 1

The oscillating and regular motion of an object is known as the SHM. The object must move 0.532 meters from x(t) = 0.65 meters to x(t) = A = 1.182 meters.

It is a periodic and oscillating movement that moves in a rectilinear fashion.

Knowing that there will always be a restoring force (F) that tends to return the motion to its initial location when it moves an amount called an amplitude is important when thinking about simple harmonic motion.

There are some important factors to take into account with this motion,

The movement's position, X (m), in its initial, equilibrium, and other positions.

The speed is a (m/s2).

Speed, V (m/s)

The volume, A (m)

The periodicity, w (rad/s),

The distance that the object needs to move from x(t) = 0.65m to x(t) = A = 1.182m is 0.532m.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4


Related Questions

The light energy that falls on a square meter of ground over the course of a typical sunny day is about 20 MJ . The average rate of electric energy consumption in one house is 1.0 kW .
Part A got answer for part A and is correct
On average, how much energy does one house use during each 24 hr day?
Express your answer using two significant figures.
=86 MJ
Part B
If light energy to electric energy conversion using solar cells is 15%efficient, how many square miles of land must be covered with solar cells to supply the electrical energy for 250,000 houses? Assume there is no cloud cover. A=___________mi^2

Answers

86.4×10^6 joule is energy does one house use during each 24 hr day.

20 MJ of light energy

Consumption of electricity is 1 kW.

The energy consumption lasts for 24 hours.

energy=power×time

energy=10^3×24×3600

energy=86.4×10^6 joule

Energy in physics is the ability to perform work. Different shapes, such as potential, kinetic, thermal, electrical, chemical, radioactive, etc., may be assumed by it. Other examples of energy being transferred from one body to another include heat and work. Energy is always distributed after it has been transported in accordance with its type. Thus, heat transfer could result in thermal energy, whereas work could result in mechanical energy.

Motion is a trait shared by all forms of energy. For instance, if a body is moving, it has kinetic energy. Due to the object's design, which incorporates potential energy, a tensioned object, like a spring or bow, has the ability to move even when at rest.

To know more about  energy visit : brainly.com/question/1932868

#SPJ4

a circular curve of highway is designed for traffic moving at 60 km/h. (a) if the radius of the curve is 150 m, calculate the correct angle of banking of the road. (b) if the curve were not banked, calculate the minimum coefficient of friction between tires and road that would keep traffic from skidding at this speed.

Answers

The angle of banking of the road is 11° and The minimum coefficient of friction between tires and road is 0.19

The attached free-body diagram to the query illustrates the forces operating on the car if the road is banked at an angle without utilizing friction (i.e., frictionless road).

mg = N cos θ (Eqn 1)

mg = weight of the car.

N = normal reaction of the plane on the car

And in the direction parallel to the inclined plane,

(mv²/r) = N sin θ (Eqn 2)

(mv²/r) = force keeping the car in a circular motion

Divide (Eqn 2) by (Eqn 1)

(v²/gr) = Tan θ

v = velocity of car = 60 km/h = 16.667 m/s

g = acceleration due to gravity

r = 150 m

(16.667²/(9.8×150)) = Tan θ

θ = Tan⁻¹ (0.18896)

θ = 10.7° ≈ 11°

b) In the absence of banking, the force maintaining the car in a circular motion must be balanced by the frictional force of the road.

That is,

Fr = (mv²/r)

Fr = μN = μ mg

μ mg = mv²/r

μ = (v²/gr) = (16.667²/(9.8×150)) = 0.19

Know more about the coefficient of friction at:

https://brainly.com/question/19291861

#SPJJ4

which properties of our universe are well-explained by the standard big bang model, and which properties are not well-explained?

Answers

The universe's mass-energy density would be similar to the critical density based on the characteristics, which are comparative abundances of the exceptionally light elements.

What are properties in science?

Properties are the features that allow us to distinguish between different types of materials. A feature of material that is unrelated to its chemical makeup is called a physical property. Attributes include things like density, color, hardness, melting and liquid and a gas, and electrical conductivity.

What do you mean properties?

Anything that a individual or a company has legal ownership is considered property. Property can relate both to real objects, like homes, automobiles, or appliances, as well as intangible items with the potential for future value, like stock and bond certificates.

To know more about properties visit:

brainly.com/question/1200658

#SPJ4

If you are parking with your vehicle facing uphill on a road with a curb, you should turn your wheels in what direction?.

Answers

When you park and your vehicle is facing uphill and there is no curb, your wheels should be turned so that they point towards the side of the road .

If your vehicle rolls backward since , it is on a hill and it can roll back ,  you don’t want it rolling into traffic.So you would turn your wheels towards the road so if the car rolls back it will go onto the ditch, or onto someone’s lawn and not into moving traffic.If it ended up getting into the traffic it will be more dangerous for your car as well as for the other cars as it will increase the possibility of accident and cars can get damaged and you also will probably be held liable for the damage to the other car as well, so it is better if it rolls off of the roadway .

To know more about curbs visit:

https://brainly.com/question/28083477

#SPJ4

if the coefficient of kinetic friction between tires and dry pavement is 0.83, what is the shortest distance in which you can stop an automobile by locking the brakes when traveling at 21.2 m/s ?

Answers

The shortest distance required to to stop the automobile by locking the brakes is 27m.

The coefficient of friction is 0.83 between tires and dry pavement.

We have to find the shortest distance in which the automobile should come to stop from 21.2m/s.

The net acceleration of the automobile is,

a = Fr/m

Fr is the frictional force,

m is the mass of the body,

a= ug

g is the gravitational acceleration.

Putting values,

a = 0.93 x 9.8

a = 8.31 m/s².

Now, using the equation of motion,

V² - U² = 2as

s is the stopping distance,

V is the final speed,

U is the initial speed,

a is the acceleration of the automobile.

Putting values,

(21.2)² = 2 x 8.13 x s

s = 27m.

So, the stopping distance of the automobile is 27m.

To know more about Frictional, visit,

https://brainly.com/question/24338873

#SPJ4

find q1 , the volume of fluid flowing into the pipe per unit of time. this quantity is also known as the volumetric flow rate. express the volumetric flow rate in terms of any of the quantities given in the problem introduction.

Answers

The q1 is the pipe diameter, v is the velocity of the fluid, and π is the constant 3.14.

What is velocity?
When an object is moving, its velocity is indeed the direction it is moving in as a measure of how quickly its position is changing as seen from a specific point of view and so as measured by a specific unit of time, such as 60 km/h in a northerly direction. Kinematics, the area of classical mechanics which studies how bodies move, uses the concept of velocity as a fundamental building block. It takes both direction and magnitude to define velocity, a physical vector quantity. Speed is a coherent derived unit that expresses the scalar absolute value (amplitude) of velocity. Its quantity is expressed in SI (metric system) units of meters per second (m/s or ms1). The terms "5 metres per second" and "5 metres per second east," for instance, denote scalar and vector, respectively.

The volumetric flow rate can be expressed in terms of the pipe diameter, the velocity of the fluid, and the cross-sectional area of the pipe.
Volumetric flow rate = (cross-sectional area)(velocity)
Volumetric flow rate = (π x (q1/2)²) x v
where q1 is the pipe diameter, v is the velocity of the fluid, and π is the constant 3.14.

To learn more about velocity
https://brainly.com/question/24681896
#SPJ4

) suppose the distance to the moon were twice its actual value. could we still have solar eclipses? if so, what type(s)?

Answers

Answer:

I think we still could have solar eclipse but with it blocking sun by being more small

magnetic resonance imaging needs a magnetic field strength of 1.5 t. the solenoid is 1.8 m long and 75 cm in diameter. it is tightly wound with a single layer of 2.0-mm-diameter supercon- ducting wire. what size current is needed?

Answers

The current required for MRI of strength has 5.67A.

A patient is positioned inside a large magnet for the purpose of obtaining an MRI image, and they are required to maintain extreme stillness throughout the imaging procedure to prevent image blurring.

A patient may receive intravenous contrast materials (often containing the element gadolinium) before or during the MRI to hasten the rate at which protons realign with the magnetic field.

The image becomes brighter as the protons realign more quickly.

B=1.5T

l=1.8m

a=2mm=0.02m

[tex]i=\frac{2dB}{y}[/tex]

=2 x 0.02 x 1.5/1.8

=5.67A

To find more about magnetic field-

https://brainly.com/question/14848188

#SPJ4

true or false? an air-conditioning system changes the temperature of the air, but does nothing to clean the air

Answers

It is true that an air-conditioning system changes the temperature of the air, but does nothing to clean the air.

How does air conditioning system operate?

An air conditioner is a system that is used to cool down a space by removing heat from the space and moving it to some outside area. The cool air can then be moved throughout a building through ventilation.

The air-conditioning system helps keep our environment to our desired temperature. Cooling is generally achieved in the air conditioning system through a refrigeration cycle, but sometimes evaporation or free cooling is employed.

Therefore, it can be said that an air conditioner only regulates ambient temperature but does not purify the air.

Learn more about air conditioning system at: https://brainly.com/question/15319147

#SPJ1

if two objects, a and b, of different temperatures come into direct contact, what is the relationship between the heat lost by one and the heat gained by the other? what is the relationship between the temperature changes of these two objects?

Answers

The heat lost by one object is equal to the heat gained by the other.

What is heat?
heat is the energy that moves from one body to another when temperatures are different. Heat flows from the hotter to the colder body when two bodies with various temperatures are brought together. Usually, but not always, this energy transfer results in a rise in the temperature of a colder body and a fall in the temperature of a hotter body. By transitioning from one physical state (as well as phase) to another, such as from a phase from solid to liquid (melting), from the a solid to the a vapour (sublimation), from the a liquid to a vapour (boiling), either from one solid form to another, a substance can absorb heat without increasing in temperature.

This is because of the law of conservation of energy, which states that energy cannot be created or destroyed. As a result, the temperature of both objects will change until they reach the same equilibrium temperature. This is known as the law of thermal equilibrium, which states that the temperature of any two objects in thermal contact will eventually reach the same temperature.

To learn more about heat
https://brainly.com/question/934320
#SPJ4

what total volume of steel can be used in making the drum if the gasoline-filled drum is to float in fresh water?

Answers

The total volume of steel can be used in making the drum if the gasoline-filled drum is to float in fresh water is 9 L

How to calculate total volume of steel can be used in making the drum if the gasoline-filled drum is to float in fresh water?

The space occupied within an object's borders in three dimensions is referred to as its volume. It is referred to as the object's capability on occasion.

Assuming that gasoline has a density of 750 kg/m3 and steel has a density of 7800 kg/m3 as the density of gasoline is not specified.

There are 2 constraints: 1.  volume of steel + volume of gasoline = volume of water and at the threshold of sinking, 2.  mass of steel + mass of gasoline = mass of water

240L * 1m³ / 1000L = 0.240 m³

first: Vs + Vg = Vw = Vs + 0.240m³

second: ρs*Vs + ρg*Vg = ρw*Vw → substitute for Vw, Vg and all the densities

7800*Vs + 750*0.240 = 1000*(Vs + 0.240) (7800 - 1000)*Vs = 240 - 750*0.240 Vs = 60 / 6800 = 0.00882 m³ = 8.82 L ≈ 9 L

Therefore total volume of steel can be used in making the drum if the gasoline-filled drum is to float in fresh water is 9 L

The complete question is : Because gasoline is less dense than water, drums containing gasoline will float in water. suppose a 240-l steel drum is completely full of gasoline. part a what total volume of steel can be used in making the drum if the gasoline-filled drum is to float in fresh water?

To learn more about total volume of steel refer to :

https://brainly.com/question/28907440

#SPJ4

how much heat (in kj) is required to warm 15.0 g of ice, initially at to steam at . the heat capacity of ice is , and that of steam is .

Answers

The ice must be warmed with 4.719 kJ of heat.

How do you calculate heat to melt ice?Let's have a look at the energy required to melt one kilogramme of ice at absolute zero to create one kilogramme of water at absolute zero. We determine that Q = mLf = (1.0 kg)(334 kJ/kg) = 334 kJ is the energy required to melt a kilogramme of ice using the equation for a change in temperature and the value for water from Table 1.The quantity of heat energy required to transform materials from a solid to a liquid is known as the heat of fusion (melting.)The heat of fusion calculation formula is q = mHf.2090 Joules/kg C is the specific heat of ice.

Given data :

The mass of ice is, m = 10.0 g.The initial temperature is, T = - 10 degree Celsius.The final temperature is, T' = 110.0 degree Celsius.The heat capacity of ice is, c = 2.09 J/g C.The heat capacity of steam is, c' = 2.01 J/g C.

When ice absorbs heat, the conversion takes place from ice to water (liquid) and from the liquid to steam at 110 degree Celsius. So,

The amount of heat absorbed is given as,

Q = m[c(T' - T) + c'T']

Q = 10 [ 2.09 ( 110 - ( -10) + ( 2.01 x 110) ]

Q = 4719 J

Convert in kJ as,

Q = 4719/1000

Q = 4.719 kJ

Thus, we can conclude that the amount of heat required to warm the ice is 4.719 kJ.

Learn more about calculate heat to melt ice refer to :

https://brainly.com/question/26549639

#SPJ4

Once you set a ball rolling in a frictionless bowling alley, the force needed to keep it rolling is.

Answers

None of the options are appropriate in In a bowling alley with no friction, the force required to keep a ball rolling is minimal.

What does a frictionless encounter entail?

What Is a Customer Experience Without Friction? Friction is any obstacle that slows down or dissatisfies a customer during their interaction with a business. The simplest definition of frictionless customer service is monitoring the customer journey and improving the customer experience.

Are smooth and frictionless synonymous?

By frictionless, what do you mean? A frictionless surface is not possible since a smooth surface will have greater static friction than a rough surface because there will be more electromagnetic forces acting on both surfaces. Additionally, the author just wants to disregard friction on flat surfaces.

To know more about frictionless  visit:

https://brainly.com/question/434969

#SPJ4

if you triple the distance between two point charges, by which factor does the force between the particles change?

Answers

Coulomb's Law states that the force exerted on two electrostatic force is inversely correlated to their square of distance. As a result, is if distance is quadrupled, it force will be nine times weaker.

What is the definition of force?

The meaning of force in physics is: This press or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It does have a trajectory and a magnitude.

Which two types of force are there?

Contact forces & react at a range forces are the two different types of forces. Your daily use of force is evident. Basically, push and pull are forces. You exert force on an object when you push against it or pull against it.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ4

the sun is a little over 100 times larger than the earth. so, if the earth was the width of a paperclip, then the sun would be

Answers

If the Sun is around 100 times larger, then 100 times the width of a paperclip is about a meter or 3 feet or the height of a standard table.

Our Sun is 864,000 miles in diameter and 10,000 degrees Fahrenheit on the surface whereas 7,917.5 miles in diameter and  57 degrees Fahrenheit on surface.

The Sun is the star at the center of the Solar System. Its mass is about 330,000 times that of Earth, comprising about 99.86% of the total mass of the Solar System.The Sun is a G-type main-sequence star (G2V).The central mass became so hot and dense that it eventually initiated nuclear fusion in its core.

Earth is the third planet from the Sun. The atmosphere of the Earth consists mostly of nitrogen and oxygen.It is the densest planet in the Solar System.

find more:-https://brainly.com/app/ask?q=earth+and+sun

#SPJ4

a distant quasar shows a large redshift -- one so large, in fact, that the features we now see in the visible-light region of the spectrum would be invisible to us, were it not for the redshift. what band of the electro-magnetic spectrum were these features most likely in, before the spectrum was redshifted?

Answers

Answer:

Explanation:

when an inductor and a resistor are connected in parallel, how many degrees out of phase are the current flow through the resistor and the current flow through the inductor?

Answers

Its current flow through resistor and the flow of current through the inductor are 90 degrees out of phase whenever an inductor and just a resistor are coupled in parallel.

What is a resistor used for?

An resistor is an electrical component that regulates or limits the amount of electrical current that can flow through a connection in an electronic gadget. Resistors can be used to deliver a certain voltage to the an active element like a transistor.

What is resistor and its unit?

The electricity cannot travel because a resistor, a weak electrical component, introduces resistance. Almost all circuits or electrical networks have them. Resistance is measured in ohms ().

To know more about resistor visit:

brainly.com/question/24297401

#SPJ4

The expansion of the universe after its origin takes place by a phenomenon called.

Answers

Expansion of the universe after its origin takes place by a phenomenon called inflation.

What is inflation?

In physical cosmology, a theory of exponential expansion of space in the early universe is called inflation.

Prior to the Big Bang, the universe underwent a breathtaking cosmic expansion, doubling in size in a fraction of a second. This rapid inflation, fueled by energy that permeated empty space and left the universe desolate and cold.

The Big Bang theory explains how the universe got from the hot dense state of the early universe to the cold dense state whereas cosmic inflation is an explanation of some properties of the cosmic microwave background radiation.

To know more about inflation, refer

https://brainly.com/question/777738

#SPJ4

The need to extend the model A. The circuit at right contains three identical bulbs and an ideal battery. Assume that the resistance of the switch, when closed, is negligible. Use the model we have developed to Ope Sw * predict the relative brightness of the bulbs in the circuit with the switch closed. Explain. predict how the brightness of bulb A changes when the switch is opened. Explain in Show that a simple application of the model for current that we have developed thus far is inadequate for determining how the brightness of bulb B changes when the switch is opened B

Answers

The brightness of a bulb connected to two parallel cells is equivalent to that of a bulb connected to one cell. The voltage is 1.5 V in both instances.

The lifespan of two parallel cells is double that of a single cell. A bulb with two cells connected in series will be brighter but last the same amount of time as one cell. shutoff switch Shorting off bulb A from the circuit. As a result, the overall resistance is reduced, the current is raised, and bulb D becomes brighter. So, turn off all 4 switches to boost D's brightness. The amount of electricity passing through the bulb determines how bright it is. The brightness would grow when the current was raised. As current increases, the brightness of the light the bulb emits also increases.

Learn more about resistance here-

https://brainly.com/question/29427458

#SPJ4

If one of the rocks that you were analyzing for density suddenly split in two, and you were only able to measure the mass and volume of a smaller piece, would that change the outcome of your calculation?.

Answers

The answer is C) No, and that is called an intensive property.

What is mass?

mass is a very large amount of number or something.

Intensive properties are those that do not depend on the mass or size of a body. If the system is divided into several subsystems its value will remain unchanged, therefore they are not additive

Examples of intensive properties are elasticity, speed, specific volume (volume occupied by the unit of mass), density, boiling point, melting point, viscosity, hardness, concentration, solubility, odor, color, taste, conductivity, porosity, pressure, temperature, etc., in general, all those that characterize a substance distinct from others.

For instance if we have a liter of water, your boiling point is 100 °C (at 1 pressure atmosphere). If another liter of water is added, the new system, made up of two liters of water, has the same boiling point as the original system. This illustrates the non-additivity of intensive properties.

To know more about mass click-

https://brainly.com/question/26150306

#SPJ4

a force of 30 n acts on a 2 c charge in a 5 t magnetic field. if the charge is moving perpendicularly to the field, how fast is it moving?

Answers

The velocity by which charge is moving is 3m/sec if a force of 30N acts on it in a 5Tesla magnetic field.

We know very well that a moving charge can produce both magnetic field and electric field. Static charge is only able to produce electric field.

Moving charge has velocity due to that it is able to produce magnetic field.

Now, direction of charge is very important as it will decide whether force act on the charge applied by the magnetic field or not.

Now, We know very well that force exerted by magnetic field on the charge is given by(F)=qvBsinθ where

q is the amount of charge,

v is the velocity of charge

F is the amount of force

B is the amount of magnetic field and

sinθ is the angle made by the charge with the plane of magnetic field.

Since charge is moving perpendicularly to the field, therefore value of sinθ=1

Now, F=qvBsinθ

=>v=F/qvBsinθ

=>v=30/(2×5×1)

=>v=30/10

=>v=3m/sec

Hence, velocity of charge is 3m/sec.

To know more about charge, visit here:

https://brainly.com/question/15306248

#SPJ4

rank the block based on its electrical resistance along the three illustrated coordinate directions (x, y, and z).

Answers

The resistance is halved and ranking is  y, z, x

Let x. = 3 cm., y = 10 cm., z. = 4 cm.

resistance is proportional to L/A where L is the length along the current, A is the area of cross section,

along x direction: L = x, A = yz, so L/A = x/yz = 3/40 = 0.075

along y direction: L = y, A = xz, so L/A = y/xz = 10/12 = 0.833

along z direction: L = z, A = xy, so L/A = z/xy = 4/30 = 0.133

a) rank: y, z, x

Depending on its shape and the material it is made of, an object's resistance varies. We can learn more about the resistance of more complex shapes by using the straightforward analysis of the cylinder resistor in Figure 1. The cylinder's electric resistance R, which is comparable to a pipe's resistance to fluid flow, is directly proportional to its length L, as one might anticipate. More collisions will occur between charges and its atoms the longer the cylinder is. A cylinder's capacity to carry more current increases with its diameter. The cylinder's cross-sectional area A and R are actually inversely proportional.

Learn more about resistance here:

https://brainly.com/question/29427458

#SPJ4

consider a piezoelectric common rail injector. what happens to the actuator when current is initially applied to the crystals?

Answers

According to the piezoelectric actuator's operating principle, when voltage is applied, the piezoelectric actuator produces a little displacement with a large amount of force.

As a result, they are utilized in a variety of applications such as ultra-precize positioning, high force handling, and force generating under fixed or dynamic settings. The Piezoelectric Injector is crucial to the operation of contemporary common rail technology. In Piezo diesel injectors, when an electrical voltage is applied, Piezo crystals slightly expand, changing their structural properties in less than a thousandth of a second. Electric potential difference between two sites is referred to as voltage, also known as electric pressure, electric tension, or (electric) potential difference. The work required to transport a unit of charge in a static electric field correlates to this.

Learn more about voltage here

https://brainly.com/question/13521443

#SPJ4

considering higher frequencies, what is the next frequency that will be canceled out upon reflection with this distance between rows?

Answers

283.33Hz is the next frequency that will be canceled out upon reflection with this distance between rows.

How might you define frequencies?

The number of waves that pass through a fixed location in a specific amount of time is known as frequency. As a result, if a wave travels for 1/2 second, the frequency is 2 per second. 100 times per hour is the frequency if it takes 1/100 of an hour.

Given,

L = 1.5

n = 2

Vs = 340

By using following formula calculate λ:

L = (n+1/2)λ/2

1.5 = (2+1/2)λ/2

1.5 = 5λ/4

λ = 1.5×4/5

λ = 1.2

By using following formula calculate frequency:

Vs = fλ

f = 340/1.2

f = 283.33Hz.

To know more about frequency visit:

https://brainly.com/question/14131991

#SPJ1

if every sun-like star had an earth-like planet in an earth-like orbit, how many could be detected by a transit?

Answers

If every sun-like star had an earth-like planet in an earth-like orbit, then the transit would be 1 in 200.

Explain in detail.

The transit technique has been used to find the majority of known exoplanets. When a planet passes in front of an observer and a star, it is said to be transiting. When Venus or Mercury pass in front of Earth and the Sun, transits inside our solar system can be seen from the planet.Less than 1% of the stars Kepler will observe are located within 600 light-years of Earth. Kepler cannot witness the transits necessary to find planets the size of Earth from stars more than 3,000 light years away because to their faintness.

To know more about Kepler here

https://brainly.com/question/3631403

#SPJ4

if the work done by a battery to move a unit charge through the battery from one terminal to the other is doubled, what is the effect on the battery's emf?

Answers

The emf is doubled

The change in electric potential energy of a charge is equal to the work done by a battery to carry a unit charge across the battery from one terminal to the other, hence it may be expressed as

w=qΔV

where

The charge is q.

ΔV is the difference in potential that the charge has traveled through.

The potential difference is equal to the battery's emf because the charge is flowing through the battery e, which means.

W=qe (1)

We are informed in this issue that the battery's output has increased, so

w'=2W

We can see from eq. (1) that the battery's emf is proportional to the work performed; as a result, when the work doubles, so does the battery's emf.

What is potential difference?

The difference in charge carriers energy between two places in a circuit is known as the potential difference.

To know more about potential difference visit

https://brainly.com/question/21808222

#SPJ4

two charged particles 1 m apart exert a 1-n force on each other. if the magnitude of each charge is doubled, the force on each particle will be

Answers

4F will be force if the magnitude of each charge is doubled,

F=q1q2/r²

F1=2q12q2/r²= 4F

An object experiences a push or a pull when it interacts with another thing. When two items come into touch, a force is applied to each object. The force between the two items is gone after the encounter. Forces do not exist independently; they are only interactions.

Contact forces are produced when two things interact and appear to be in physical contact with one another. Frictional forces, tensional forces, normal forces, air resistance forces, and applied forces are a few examples of contact forces. Action-at-a-Distance forces are still there even when two interacting objects are separated from one another by a great distance.

To know more about  force visit : brainly.com/question/13191643

#SPJ4

What can happen to solar radiation when it enters Earth’s atmosphere?

Answers

When solar radiation is enters Earth’s atmosphere it absorbed or reflected as it travels to the earth's surface.

What is Solar Radiation?

The electromagnetic radiation that the sun emits is known as solar radiation, sometimes referred to as the solar resource or just sunshine. With the use of various technologies, solar radiation may be absorbed and converted into usable forms of energy like heat and electricity.

When solar radiation penetrates the earth's atmosphere, it travels and collides with the ground. The earth absorbs some of the rays, while the remainder are reflected back into the atmosphere. A layer of gas called a blanket of greenhouse gases in the atmosphere absorbs some of the reflected rays, while a minute fraction escapes back into space.

To know more about solar radiation refer to:

https://brainly.com/question/14392965

#SPJ1

a certain kind of glass has an index of refraction of 1.650 for blue light of wavelength 430 nm and an index of 1.615 for red light of wavelength 680 nm. if a beam containing these two colors is incident at an angle of 30.00° on a piece of this glass, what is the angle between the two beams inside the glass?

Answers

The angle between the two beams inside the glass is 0.38⁰.

What is the angle between the two beams inside the glass?

The angle between the two beams inside the glass is calculated by applying the following formula.

Let the angle of refraction of the red light = θ₁

Let the angle of refraction of the blue light = θ₂

The difference in the angle of refraction of the red light and the blue light is calculated as;

Δθ = θ₁ - θ₂

Δθ = arc sin(sinθ₁ / n₁) - arc sin(sinθ₂/n₂)

where;

n₁ is the refractive index of the red light n₂ is the refractive index of the blue light

Δθ = arc sin(sin30 / 1.615) - arc sin(sin30/1.650)

Δθ =  0.376⁰

Δθ  ≈ 0.38⁰

Learn more about refraction angle here: https://brainly.com/question/15838784

#SPJ1

a 34 kg child is riding a playground merry-go-round that is rotating at 15 rev/min. what centripetal force must she experience to stay on the ride if she is 1.2 m from its center?

Answers

m m kjs kj ckjs cks ck cks cks ckjs ckjsc j                                   nhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

100.56N to maintain her position. A force that causes a body to maintain a curved path is known as a centripetal force. .

What is the centripetal force calculation formula?

The formula for centripetal force is supplied by the mass, velocity, and radius. f c = m v 2 / r. Where m = mass; v = velocity; and r = radius, fc = centripetal force. We must be aware that this formula resembles the traditional formula for the force in several ways.

Briefing:

Given

The child's mass= (34 kg)

Weight (mg)= (34x9.8=333.2N)

And distance from the center

(w=215/60=1.570),

The distance from the center is 1.2 meters.

She applies centripetal force of

F=m(w)*2xr

F=34x(1.570)*2x1.2

F=100.56N to maintain her position.

To know more about centripetal force visit:

https://brainly.com/question/14249440

#SPJ4

Other Questions
a client with aids is prescribed octreotide acetate. the nurse understands that this medication will assist in alleviating which problem? When a metal car is struck by lightning, the resulting electric field inside the car is. Thermal energy is released when calcium chloride dissolves in water. It is absorbed when ammonium chloride dissolves in water. Which substance will you use in your design? the policies that enabled the high-risk mortgages and financial instruments that caused the 2008 financial crisis reflect a which lifestyle change would the nurse instruct the patient to implement in order to successfully manage diabetes mellitus The first free public education system in the United States began in which colony Nuclear decay occurs according to first-order kinetics. How long will it take for a sample of radon-218 to decay from 99 grams to 0. 50 grams? the half-life of radon-218 is 35 milliseconds. In Schizophrenia psychotic symptoms such as hallucinations delusions, disorganised speech and grossly disorganised or catatonic behaviours are known as:a)Negative symptomsb)Positive symptomsc)Mediating symptomsd)Catastrophic symptoms The temperature at 9 p.m. was -4 degrees Fahrenheit, which is one-third of the temperature at midnight. What was the temperature at midnight? Write an equation that could represent this situation. you are suspicious that a child is being physically abused and neglected. what would be your best course of action in such a situation Assume you are an IT manager for a small- to medium-sized company. You are currently working on a new website and need someone to help develop your website. You need to place an ad for the position. Without listing the specific skills, state a name for the position and the minimum requirements for the position. Defend your answer with reasons why these are necessary minimum requirements. a nurse on a neurological unit is participating in the care of a female patient who is receiving treatment for a spinal cord injury (sci) that she experienced 2 weeks ago. the patient's care plan specifies measures to prevent skin breakdown, and the nurse has planned several changes of position during the shift. how should the nurse best reposition this patient? A single toss of a fair coin results in either 0 or 1 head, each with probability 1/2. Define H= number ofheads obtained on a single toss. The mean of His My = 0.5 and the standard deviation of His oH = 0.5.Suppose you toss a fair coin four times. Define T= total number of heads obtained. Find the mean and standard deviation of T. localized rapid bone turnover, most commonly affecting the skull, femur, tibia, pelvic bones, and vertebrae, is characterized by which bone disorder? which reaction is the formation reaction for cao(s) ? in other words, which equation has a Hrxn value equal to the Hf value for cao(s) 2ca(s) o2(g)2cao(s) ca(s) 12o2(g)cao(s) cao(s)ca(s) 12o2(g) ca2 (aq) o2(aq)cao(s) 2cao(s)2ca(s) o2(g) when is the soonest we are likely to have moderate-resolution images and spectra of earthlike planets around other stars? Put the steps in order that are used to solve the following systems of equations by substitution.-7x - 2y2y= x= 2 (-4) +11 x = 3x-== - 1311= x - 2y = 11 x = 2y + 11=y=-4= -7 (2y + 11) - 2y = -13= (3,-4)= -16y = 64= -16y - 77 = -13= -14y-77-2y = -13 to calculate the energy needed to boil water that initially starts in the liquid state below the boiling point, what quantities are needed? a server is configured for dynamic nat and has used all public ip addresses in the pool. what will the router do when another device wants to reach the outside network? Why did the leaders of the gold coast chose the name Ghana and who suggested it?