which reaction is the formation reaction for cao(s) ? in other words, which equation has a δH∘rxn value equal to the δH∘f value for cao(s) 2ca(s) o2(g)⟶2cao(s) ca(s) 12o2(g)⟶cao(s) cao(s)⟶ca(s) 12o2(g) ca2 (aq) o2−(aq)⟶cao(s) 2cao(s)⟶2ca(s) o2(g)

The precipitate that will be formed at the end of the reaction would be Barium sulphate.

Solubility is the new bond formation between the solute molecules and the solvent molecules. In terms of quantity, solubility is the maximum concentration of solute that dissolves in a known concentration of solvent at any given temperature.

We need to consider each ionic compound (both the reactants and the possible products) in light of the solubility rules. If a compound is soluble, we use the (aq) label with it, indicating that it dissolves. If a compound is not soluble, we use the (s) label with it and assume that it will precipitate out of solution

Barium chloride and potassium sulfate are both ionic compounds. We would expect them to undergo a double displacement reaction with each other.

BaCl2 + K2SO4  BaSO4 + 2 KCl

By examining the solubility rules we see that, while most sulfates are soluble, barium sulfate is not. Because it is insoluble in water we know that it is the precipitate. As all of the other substances are soluble in water we can rewrite the equation.

BaCl2(aq) + K2SO4(aq)  BaSO4(s) + 2 KCl(aq)

To know more about precipitate

https://brainly.com/question/18109776

#SPJ4

If the mass of the magnesium oxide collected is 0.224 g then the 0.296g solid magnesium is E) Limiting reagent

Limiting reagent is a term used in chemistry to describe a reactant that is completely used up in a reaction in which it is involved and therefore this reagent determines when the reaction stops.

Magnesium burns brightly because the reaction releases a lot of heat. Because of this exothermic reaction, magnesium gives two electrons to oxygen, forming the product which is powdery magnesium oxide.

The reaction of magnesium with oxygen can be illustrated as follows;

[tex]2Mg + O_{2} ---- > 2MgO[/tex]

As per the reaction, 2 moles of magnesium react with 1 mole of oxygen therefore magnesium produces less magnesium oxide as compared to oxygen and thus is the limiting reagent in this reaction.

Although a part of your question is incorrect, you might be referring to this question:

A 0.296 g piece of solid magnesium reacts with gaseous oxygen from the atmosphere to form solid magnesium oxide. In the laboratory, a student weighs the mass of the magnesium oxide collected from this reaction as 0.224 g The 0.296 g solid magnesium is the

Choose one:

O A actual yield

O B theoretical yield

O C excess reagent

O D. percent yield

O E limiting reagent

To learn more about limiting reagents; click here:

https://brainly.com/question/26905271

#SPJ4

17/10 cups of flour would it take to make 1 cake.

It is given that,

A recipe calls for 17/2 cups of flour to make 5 cakes.

We need to find the no of cups of flor require to make 1 cake.

5 cakes = 17/2 cups of floor

1 cup =

[tex]=\frac{17}{2}.\frac{1}{5} \\=\frac{17}{10}[/tex]

Therefore, 17/10 cups of floor are needed to make 1 cake.

To learn more about cups of flour from the given link.

https://brainly.com/question/1955459

#SPJ4

4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄ is the balanced equation.

First write the complete equation

LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄

Now balance the given equation

LiBr + Co(SO₄)₂ ----> Li₂SO₄ + CoBr₄

Reactant Side Product side

Li= 1 Li = 2

Br = 1 S = 1

Co = 1 Co = 1

S = 2 S = 1

O = 8 O = 4

We can see that there are 8 oxygen atom in yhe Reactant side and 4 in the product side. So multiply by 2 in the product side to balance the Oxygen atoms.

4LiBr + Co(SO₄)₂ ----> 2Li₂SO₄ + CoBr₄

We can see that the given equation is now balanced.

Learn more about the Balanced equation here: https://brainly.com/question/26227625

QUESTION: Write the complete equation and also balanced the equation.

_LiBr + _ Co(SO₄)₂ --> _ + _

Nitromethane, ch3no2 has a nitrogen atom with sp2 hybridization.

With the chemical formula CH3NO2, nitromethane, or just "nitro," is an organic molecule. The simplest organic nitro compound is this one. It is a polar liquid that is frequently used in extractions, as a reaction medium, and as a cleaning solvent in a range of industrial applications. It is frequently employed in the production of insecticides, explosives, textiles, and coatings as an intermediate in organic synthesis. In a variety of motorsports and pastimes, including Top Fuel drag racing and the miniature internal combustion engines used in radio-controlled, control-line, and free-flight model aircraft, nitromethane is utilized as a fuel additive. This is called Nitromethane.

To learn more about Nitromethane visit here;

https://brainly.com/question/19578949

#SPJ4

When 8.0 g of N₂H₄ (32 g mol⁻¹) and 92 g of N₂O₄ (92 g mol⁻¹) are mixed and react according to the equation above, the maximum mass of H₂O that can be produced is 9 g.

The equation of the reaction of N₂H₄ and N₂O₄ is given by,

2N₂H₄ (g) + N₂O₄ (g) ↔3N₂ (g) + 4H₂O (g)

Mass of N₂O₄ is given by = (2×14+4×16)                                            

                                          = 92 g            

Mass of N₂H₄ is given by = 2 (2×14+4)                                            

                                          = 64 g

As per the stochiometric equation, 64 g of N₂H₄ reacts with 92 g of N₂O₄  8 g of N₂H₄ reacts with

= 92/64 × 8 =11.5 g of N₂O₄

But the given amount of N₂O₄ is 92 g. So N₂H₄ acts as a limiting reagent.

64 g of N₂H₄ gives

4 × 18 = 72 g of water

8 g of N₂H₄ gives

72/64 × 8 = 9 g of water

The mass of water is 9g.

To know more about limiting reactants, click below:

https://brainly.com/question/24945784

#SPJ4

In all applications of the hydrogen electrode under standard circumstances, the metal hydrogen gas is formed.

Redox half cell is the foundation of the hydrogen electrode: 2 H+(aq) + 2 e− → H2 (g) A platinum electrode with platinization is the site of this redox process. Pure hydrogen gas is bubbled through the electrode after it has been immersed in an acidic solution. Both the reduced form and the oxidised form's concentration are kept at unity. An electrode with an assigned potential of zero to which all other electrode potentials are referred for comparison is typically made of platinum black on platinum and is over which a stream of hydrogen is bubbled when certain conditions are met.

For measurements of electrode potential, the hydrogen electrode is utilised as a reference. It is the most significant electrode for usage in aqueous solutions, theoretically. The reversible hydrogen electrode displays a potential that is thought to be zero at all temperatures in a solution of hydrogen ions with unit activity. Hydrogen is declared to have zero standard electrode potential.

To know more about Hydrogen Electrode visit:

https://brainly.com/question/28198248

#SPJ4

If 61. 3 g ions cl2 react to excess pcl3 to generate 119. 3 g of pcl5, the percent yield again for combination pcl3(g) Plus cl2(g) pcl5(g) will be 66.3%.

The meaning of percent yield is?

The actual yield is calculated as the theoretical yield multiplied by 100 to get the percent yield. Actual Yield / Percent Yield Theory Yield) = 100% There are various reasons why a chemical reaction's actual yield could be lower than its theoretical yield; these will be covered in more detail in subsequent stories of the course.

Is a high or low yield preferable?

A low-yield bond is preferable for investors seeking a nearly risk-free investment or for those who are hedging their mixed portfolio by holding some of it in low-risk securities. The

Briefing:

Theoretical yield = 61.3 g Cl2 ( 1 mol / 70.9 g) ( 1 mol PCl5 / 1 mol Cl2 ) ( 208.2 g / 1 mol ) = 180.01 g PCl5

Percent yield = 119.3 g / 180.01 g x100 = 66.3%

To know more about percent yield visit:

https://brainly.com/question/26430784

#SPJ4

The calculated pH of the given solution 0.015M HCl (aq) is equal to 1.82. Therefore, option (A) is a FALSE statement concerning this HCl solution.

The pH of a given solution can be defined as the negative logarithm of hydrogen (H⁺) or hydronium ion concentration. Mathematically, pH is inversely proportional to the concentration of (H⁺) ions.

pH = -log ([H⁺])

In chemistry, pH scale is used to calculate the acidic or basic strength of an aqueous solution. The pH scale exhibits a range from 0 to 14. A low pH (about 1 or 2) is acidic while a pH of 7.0 is neutral and a high pH (12 or 14) is basic.

Given the concentration of HCl aqueous solution= 0.015M

The hydronium ion concentration, [H₃O⁺] = 0.015 M

pH = -log [H₃O⁺] = - log (0.015)

pH = 1.82

As the HCl is strong acid it will completely dissociate and no HCl molecules are left in the solution.

Learn more about pH value, here:

brainly.com/question/1503669

#SPJ1

The answer to this question will be = True

The process behind the conversion of a solid state to a liquid state is called melting and the process behind it is called Enthalpy of Fusion or Heat of Fusion, when heat energy is added to any solid the particles inside it start to expand due to the heat of fusion and the particles lose their solid property and due to the expansion of molecules of solid, it changes into a liquid.

The correct lewis dot symbol for the chloride ion Cl⁻ is given as follows :    

            ..

          : Cl :⁻

             °°

The chlorine atomic number is 17. The chlorine is place in the group 17 and the period 3 in the periodic table. the electronic configuration oif chlorine is given as :

₁₇Cl = [ Ne ] 3s² 3p⁵

The electrons present in the outer most shell in the chlorine is 7. in the chlorine ion Cl⁻ means one extra electron is added to the chlorine and this shows by the negative charge and the symbol for chlorine ion is Cl⁻ . the lewis dot structure is given above.

To learn more about lewis dot here

https://brainly.com/question/25453559

#SPJ4

Based on your understanding of the process of photosynthesis, predict what will happen to a plant leaf that loses CO2 too quickly. This event will have no effect on the rate of photosynthesis in the leaf. Photosynthesis in the leaf will slow down or possibly stop.

Future carbon dioxide concentrations ([CO2]) predictions indicate that plant reactions to atmospheric carbon dioxide will be a major concern. Increased photosynthesis results in higher levels of biomass and carbohydrates produced by plants when [CO2] levels are elevated. Between species as well as within species, different organs receive the extra carbs. These carbohydrates serve as an important source of energy for plant growth, but they also function as signaling molecules and have a variety of other functions besides providing carbon and energy. The greater concentration of carbohydrates generated under increasing [CO2] is currently unknown to have any impact on the sugar sensing and signaling pathways of plants.

Learn more about photosynthesis here:

https://brainly.com/question/2114746

#SPJ4

The ideal gas law exhibits the relationship between the pressure and the volume of the gas. The pressure of the pure oxygen in the sample will be 736.2 torrs.

A theoretical gas called an ideal gas is one that has lots of point particles flying around arbitrarily and not being affected by other particles. The ideal gas notion is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. A theoretical gas called an ideal gas is one that has many of randomly moving particles but doesn't have any interparticle interactions. The converse is true for a real gas; it takes up space and its molecules interact. As a result, PV is always equal to nRT.

Learn more about ideal gas here:

https://brainly.com/question/28257995

#SPJ4

If there is exactly one molecule of solute in one liter of solution, the concentration is 66x10^-24 M.

The term might or might not include ions that fit this specification depending on the context. A molecule is a grouping of two or more atoms that are held together by the chemical bonds that act as attractive forces. Two or more atoms of the same or different element that are joined together to form a molecule are referred to as molecules. A molecule can be heteronuclear, which is a chemical compound made up of more than one element, like water, or homonuclear, which implies it is made up of atoms of one chemical element, like oxygen (O2) (H2O).

Subtract the empirical formula mass from the molar mass of the compound. The outcome must be a whole number or a number that is very close to a whole number. Divide the whole number from step 2 by each subscript in the empirical formula. The molecular equation is the end result.

A mole is defined as6.02x10^23 particles, or molecules in this case. Utilize this connection as a conversion factor:

(One mole/6.02x10^23 molecules)

When there is only one molecule present, use the following conversion factor to determine the solute's moles:

(1 molecule) / (1 mole) / (6.02x10^23 molecules) = 1.66 x 1024 moles.

When the molecules cancel, only moles are left.

The number of moles of a solute per liter is concentration by definition. Divide the 1.66x10^-24 moles by the 1.0L volume to get the following result:

1.66x10-241.66x10^-24 molar, or 1.66x10^-24 M, is the result of dividing 1.66x10^-24 moles of solute by 1.0 liter.

To know more about Molecule visit:

https://brainly.com/question/1446104

#SPJ4

Dehydrohalogenation and dehalogenation reactions are the two most frequent elimination processes.

It is common practise to convert saturated compounds (organic molecules with single carbon-carbon bonds) into unsaturated compounds using an elimination reaction (compounds which feature double or triple carbon-carbon bonds).

Therefore, two sigma bonds will break during an elimination process, resulting in the production of a double bond (that is, one sigma and one pi bond).The kind of atoms or groups of atoms that are expelled from the molecule is a frequent way to identify elimination reactions. Dehydrohalogenation, for instance, is the removal of a hydrogen atom and a halogen atom; dehalogenation is the reaction's name when both leaving atoms are halogens.

To learn more about  frequent  please click on below link

https://brainly.com/question/13305546

#SPJ4

A chemical has hydroxyl groups as its main functional group, hence choice c is accurate. Probably an alcoholic beverage. The substance's primary functional group is a hydroxyl group.

Is referred to as either Alcohols or Carboxylic Acids. Because the hydroxyl group has a hydrophilic character, which means it draws water to itself, it dissolves readily in water. The specific group of atoms in molecules that are in charge of the molecules' distinctive chemical reactions is referred to as a functional group. The hydroxyl group is the functional group that has been provided to us, and its functional formula is -OH. Alcohol is the name given to a substance that contains hydroxyl groups. Hence the compound is alcohol.

Learn more about hydroxyl group here

https://brainly.com/question/23639315

#SPJ4

The structure has a net charge of zero as shown by the question.

What is a charged species?

If a species has an excessive amount of positive or negative charge, we say that it is charged. If there is an excess of a positive charge, the substance is positively charged, and if there is an excess of a negative charge, the thing is simply negatively charged.

As we've seen, when we have a chemical structure, it's feasible that the structure itself might have a net charge. By examining the formal charges that each atom in the system carries, we may determine the net charge that the structure contains.

As we can see, the molecule's centre atom carries a -1 charge, which is the charge that the entire structure is carrying.

If we then examine the structure as it is, we can see that the chlorine atom has a negative charge linked to it, as is evident from the image that is attached to the question.

To Learn more about net charge

brainly.com/question/12708636

#SPJ4

The first model of the atom was developed by JJ Thomson in 1904, who thought that atoms were composed purely of negatively charged electrons. This model was known as the 'plum pudding' model.

This theory was then disproved by Ernest Rutherford and the gold foil experiment in 1911, where Rutherford shot alpha particles at gold foil, and noticed that some went through and some bounced back, implying the existence of a positive nucleus.

In 1913, Niels Bohr proposed a model of the atom where the electrons were contained within quantized shells that orbited the nucleus. This was because it was impossible for the cloud of negative electrons proposed by Rutherford to exist, as the negative electrons would be drawn to the positive nucleus, and the atom would collapse in on itself.
In 1926, the Austrian physicist Erwin Schrödinger created a quantum mechanical model of the atom by combining the equations for the behavior of waves with the de Broglie equation to generate a mathematical model for the distribution of electrons in an atom.

However the model used today is closest to the Bohr model of the atom, using the quantized shells to contain the electrons.

To learn more about Atomic Model visit here ; https://brainly.com/question/9145431?referrer=searchResults
#SPJ4

Heating the aspirin speeds up the reaction time. A vinegar-like smell is produced which is acetic acid.

Describe how aspirin is synthesized?

Salicylic acid and acetic acid can be combined to create aspirin in the presence of a catalyst that is also an acid. Together with the carboxyl group on acetic acid, the phenol group on salicylic acid produces an ester. Nevertheless, the yield of this reaction is little, and it is sluggish. The reaction is more faster and has a greater yield when acetic anhydride is used in place of acetic acid (since acetic anhydride is much more reactive than acetic acid).

To know more about aspirin, check out https://brainly.com/question/25794846

#SPJ4

Heat of system is 0.0056J/mol

Define heat and kind?

The three types of heat transfer are presented. Conduction of heat through solids, convection of liquids and gases, and electromagnetic waves (radiation). These three types of heat transfer are typically combined, and it often happens on its own.

Briefing:

The calorimeter's heat output is equal to its heat capacity times the temperature change:

Heat released = 0.480× 275.49

= 132.23J

Divide the heat absorbed from the moles.

Molar heat of solution = 0.75/132.23

= 0.0056J/mol

To know more about heat visit:

https://brainly.com/question/1429452

#SPJ4

Neutralization is a chemical reaction in which acid and a base react quantitatively with each other. The product obtained here is salt and water. It is even called as a double replacement reaction.

How can we calculate volume after neutralization process?

KHC8H4O4 is potassium hydrogen phthalate (KHP).

The balanced equation for the reaction:

KHC8H4O4 + NaOH ==> KNaC8H4O4 + HOH

So, the stoichiometry is 1 moles NaOH needed for 1 mole of KHP.

Molar mass of KHP = 204 g/mol

Thus, volume after neutralization process is

= 1.800 g KHP x 1 mole KHP/204 g

= 0.00882 moles

It will take 0.00882 moles of NaOH to neutralize this.

To know more about neutralization, click on https://brainly.com/question/23008798

#SPJ4

The mole fraction of 11 molal ethanol solution is 0.165

Given

Molality of ethanol solution = 11

Suppose 11 moles of ethanol is dissolved in 1000 gram water to form this concentration

moles of ethanol present = 11 moles

moles of water = 1000/18 = 55.5 moles

total moles present in the solution = 55.55 + 11

= 66.5 moles

Moles fraction of ethanol = 11/66.5

= 0.165

The mole fraction is the product of the number of molecules of a specific component in a mixture and its total molecular weight. It is a means to convey how concentrated a solution is.

Hence, mole fraction is calculated as the ratio of the total molecular weight of a mixture to the number of molecules of a particular component.

To know more about Concentration.

https://brainly.com/question/10725862

#SPJ4

Fatty acid molecules with single bonds between some carbons and double bonds between some carbons are Saturated and unsaturated fatty acids.

A fatty acid is an aliphatic carboxylic acid having a saturated or unsaturated chain that is used in chemistry, notably in biochemistry.

The majority of fatty acids that are found in nature contain an unbranched chain with an even number of carbon atoms, ranging from 4 to 28.

Saturated, monounsaturated, polyunsaturated, and trans fats are the four main categories of fatty acids. An elevated risk of coronary heart disease is linked to trans fats and saturated fatty acids.

To learn more about fatty acid refer :

https://brainly.com/question/17352723

#SPJ4

The bond angle marked as ‘a’ in the molecule above is about: D. 120 degrees. That means the angle between the atoms forms a trigonal planar shape.

The bond angle is an angle between two bonds that measures in degrees and is calculated by using the spectroscopic method. The bond angle depends on the bonds and the number of lone pairs an atom has.

The molecule above contains 3 electron charge clouds around them: a single bond to carbon, a single bond to oxygen, and a double bond to the other oxygen. Hence, the O-C=O bond angle from the molecule above is 120 degrees.

Learn more about bond angle here https://brainly.com/question/29235720

#SPJ4

Toilet bowl cleaner contain hydrochloric acid, which dissolves calcium carbonate in a toilet bowl. The mass of calcium carbonate dissolved is 5.28g.

To find out the mass, first write the balanced reaction. The balanced reaction between calcium carbonate and hydrochloric acid is

CaCO₃+2HCl→CaCl₂+H₂O+CO₂

The molar mass of HCl is 36g/mol. Hence, the number of moles for HCl is

moles=3.8 g×(1 mol/36 g)

moles=0.1055 mol

Using moles of HCl, find out moles of CaCO₃. Since mol to mol ratio for HCl to CaCO₃ is 2:1. Therefore, moles of CaCO₃ required is

0.1055 mol HCl×(1 mol CaCO₃/2 mol HCl)

=0.05275 mol CaCO₃

Convert the above moles in the mass. The molar mass of CaCO₃ is

Molar mass=[40+12+(3×16)]g/mol

=(40+12+48)g/mol

=100 g/mol

Hence, the mass of CaCO₃ is

mass=0.05275 mol CaCO₃×(100 g CaCO₃/1 mol CaCO₃)

=5.275 g CaCO₃

=5.28g CaCO₃

Therefore, the mass of calcium carbonate(CaCO₃) dissolved by 3.8g of HCl is 5.28g.

To know more about balanced reactions

https://brainly.com/question/29215391

#SPJ4

Moving from left to right across a period in the periodic table results in a decrease in metallic character. This happens because atoms are more willing to take electrons in order to fill a valence shell.

An electron in an atom's outer shell is known as a valence shell, and if the outer shell is open, the valence electron can take part in the formation of a chemical bond. One valence electron from each atom in the link is contributed to form a shared pair in a single covalent bond. The chemical characteristics of an element can be influenced by valence shell density.

The chemical elements are arranged in rows and columns on what is known as the periodic table, or table of the elements. It is commonly regarded as an icon of chemistry and is used extensively in physics, chemistry, and other sciences. Chemical properties of elements in the same group on the periodic table are similar.

learn more about valence shell here

https://brainly.com/question/20861869

#SPJ4

1. The equation is not balanced because hydrogen atoms are not balanced on both sides of the equation.

The balanced equation is: 4 NH₃ + 5 0₂ --->  4 NO + 6 H₂0

2. The equation is balanced because the atoms of elements are balanced on both sides of the equation.

N₂ + 3 H₂ --->2NH,

3. The equation is not balanced because hydrogen atoms are not balanced on both sides of the equation.

The balanced equation is: 2 H₂O ---> 2 H₂ + 0₂

Balanced chemical equations are equations in which the moles of atoms of elements on the reactants side of the reaction are equal to the moles of atoms of elements on the products side of the reaction.

Learn more about balanced chemical equations at: https://brainly.com/question/26694427

#SPJ1

The initial potassium hydroxide solution has a molarity of 0.57M.

Step 1: Acidic HNO3 + KOH Solution

To locate nitric acid moles:

(1.12 mol/L x (0.0468 L) = 0.052 mol HNO3

To locate KOH moles:

KOH's molarity is determined by the formula (0.0279 L)(x) = 0.0279x mol KOH.

Although we are unable to precisely calculate the moles of KOH added, we do know that adding basic KOH to acidic HNO3 still produces an acidic solution, indicating that about 0.052 moles of KOH were added. To completely neutralize the 0.052 mol of acid, step 2 will add the last moles of -OH.

Step 2: Ba neutralizes the Solution (OH)

2

[tex]Ba(OH)_{2}[/tex] mole detection:

0.018 mol  [tex]Ba(OH)_{2}[/tex] is equal to (0.0190 L)(0.968mol/L).

To calculate the moles of -OH in 0.018 mol of Ba(OH)

2 0.018 mol Ba (OH)

0.036 mol -OH is equal to 2 times (2 mol -OH / 1 mol [tex]Ba(OH)_{2}[/tex]).

It is neutralized in this stage. Remember that by incorporating 1 mol of [tex]Ba(OH)_{2}[/tex], we actually incorporate 2 molar equivalents of -OH. We attain neutralization after 0.036 mol of -OH has been added.

Neutralization: The formula is (moles of HNO3) - (moles of -OH)

= 0 (0.052 mol) - (0.0279x + 0.036)

= 0 0.016 = 0.0279x

x = 0.57 M.

To learn more about molarity, refer:-

https://brainly.com/question/8732513

#SPJ4