Why should we work to protect estuaries? Select all that apply.
PLSSSS

Answer:

Single replacement reaction

Explanation:

A single replacement reaction, sometimes called a single displacement reaction, is a reaction in which one element is substituted for another element in a compound.

Answer: As4010 is the Molecular Formula of Arsenic oxide. its Molecular Weight is 459.68.

hope its help you

have a great day keep smiling be happy stay safe.

Answer:

The dependent variable is the bushes of potatoes while the soil is an independent variable.

Explanation:

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

Cause and effect can be defined as the relationship between two things or events in which an occurrence one (cause) leads to the occurrence of another (effect).

In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated.

Hence, the dependent variable is the bushes of potatoes while the soil is an independent variable.

Answer:

13.2% Mg, 86.8% Br

Explanation:

Mg has a molar mass of 24.31g/mol.

Bromine has a molar mass of 79.90 g/mol.

There is one mole of Mg and two moles of Br in the compound:

79.90x2 + 24.31 = 184.11

So the total molar mass of MgBr2 is 184.11.

A percent tells us a part of a whole, so we will divide each part of the mass into the whole mass.

24.31g Mg / 184.11g MgBr2 = .132

159.8g Br / 184.11g MgBr2 = .868

Multiply these decimals by 100 to make them into a percent.

.132 x 100 = 13.2% Mg

.868 x 100 = 86.8% Br

Answer:

balanced equation of glucose

6CO2 + 6H2O----------C6H12O6 + 6O2

in the presence of sun light.

Answer:

A

Explanation:

physical property of matter

- no chemical reaction involved

- involves the measurements of mass and density

Answer:

–1065.25 KJ of energy.

Explanation:

From the question given above, the following data were obtained:

4FeO + O₂ —> 2Fe₂O₃  ΔH = –560.66 kJ

From the balanced equation above,

The formation of 2 moles of Fe₂O₃ released –560.66 kJ of energy.

Finally, we shall determine the amount of heat energy released when 3.8 moles of Fe₂O₃ are produced. This can be obtained as follow:

From the balanced equation above,

The formation of 2 moles of Fe₂O₃ released –560.66 kJ of energy.

Therefore, the formation of 3.8 moles of Fe₂O₃ will release

= (3.8 × –560.66)/2 = –1065.25 KJ of energy.

Thus, –1065.25 KJ of energy is released from the reaction.

Answer:

4046atm

Explanation:

For this question you can use the ideal gas law,

[tex]PV=nRT[/tex]

Where P is pressure, V is volume, n is moles of substance, R is the constant, and T is the temperature.

Because of the units given, R will equal .08026[tex]P=4046 atm[/tex]

[tex]P=\frac{nRT}{V}[/tex]

Then, plug in the values (I'll be excluding units for simplicity, but they all cancel out for pressure in atm):

[tex]P=\frac{(730)(.08206)(304)}{4.5}[/tex]

This will give you:

[tex]P=4046atm[/tex]

Answer:Sulfur

Hope this helps!

Explanation:

The correct name of HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.

Acids are those substances in which carboxylic acid (-COOH) is present and pH value of acids falls in the range of 0 to 6.9.

Name of the HNO₂ compound is nitrous acid, of HI is hydroiodic acid and of H₃PO₄ is phosphoric acid.

Hence name of the HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.

To know more about acids, visit the below link:

https://brainly.com/question/24375075

#SPJ2

Answer: HNO2 nitrours acid

              HI Hydroiodic acid

               H3PO4 phosphoric acid

Explanation: edu

Answer:

625.46 °C

Explanation:

We'll begin by converting 19 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

T(°C) = 19 °C

T(K) = 19 °C + 273

T(K) = 292 K

Next, we shall determine the Final temperature. This can be obtained as follow:

Initial volume (V₁) = 3.25 L

Initial temperature (T₁) = 292 K

Final volume (V₂) = 10 L

Final temperature (T₂) =?

V₁/T₁ = V₂/T₂

3.25 / 292 = 10 / T₂

Cross multiply

3.25 × T₂ = 292 × 10

3.25 × T₂ = 2920

Divide both side by 3.25

T₂ = 2920 / 3.25

T₂ = 898.46 K

Finally, we shall convert 898.46 K to celsius temperature. This can be obtained as follow:

T(°C) = T(K) – 273

T(K) = 898.46 K

T(°C) = 898.46 – 273

T(°C) = 625.46 °C

Therefore the final temperature of the gas is 625.46 °C

Answer:

Sound waves travel faster in a liquid than a gas, our ears are just not designed to  translate the faster moving waves.

Explanation:

Sound waves are mechanical waves which travel through vibrating the medium (the "stuff") they're traveling through. This means they actually move faster through materials that are more dense, and will move more quickly through liquid than gas, and a solid than a liquid. However, our ears are adapted to "translating" sound waves in air rather than water, so we don't understand the music well when the waves move through the water.

A similar idea explains why our vision is blurry underwater; light waves travel at a different speed (slower, not faster!) in water and our eyes perceive this change in speed as blurriness.

Answer:

D

Explanation:

Answer:

gases

Explanation:

Answer:

the Carbondioxed and oxygen are both a gass found in the air

Answer:

Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other

Hope it helps

Please mark me as the brainliest

Thank you

Answer:

disagree

sometimes they attract

Explanation:

Answer:

Explanation:

2. Agree

3. Agree

4. Agree

5. agree

6. disagree

If im wrong its because im tired lol

Answer:

it is a chemical change because it can't be change back to it normal position when it gets burnt

Answer:

3.36 M

Explanation:

Step 1: Given data

Step 2: Calculate the moles (n) of CuSO₄.6H₂O (solute)

We will use the following expression.

n = m/M

n = 25.2 g / (267.72 g/mol) = 0.0941 mol

Step 3: Calculate the molarity

Molarity is equal to the moles of solute divided by the liters of solution.

M = 0.0941 mol/0.0280 L = 3.36 M

Answer:

The correct answer is - 14.

Explanation:

In the given molecular formula of the aluminum sulphite which is Al2(SO3)3, this molecular formula there different type of elements are bonded together to form this compound each element has a specific number of atoms present. This compound has three elements that are aluminum, sulfur, and oxygen and the atoms are present are:

Al = 2 atoms represented by subscript

S = 3 atoms represented as whole subscripts of sulfite

O = 9 atoms 3 inside bracket and 3 outside of bracket that multiplies.

Thus, total number of atoms are 2+3+9 = 14

Answer:

Kindly check the explanation section.

Explanation:

PS: Note that enough information are not being provided and we do not know the experiment this question is all about. However, some information are provided below which is going to aid in solving when you get access to the main question.

The determination of the heat transferred from one substance to another is one of the important aspect in science. The method in which this heat is being measured is known as calorimetry and the instrument used in this technique is known as the calorimeter.

When the energy content of a snack is needed to be calculated, there is the need use a type of instrument known as bomb calorimeter.

Most of the calorimeters used by students are not so expensive like the used in the industries. Most of these calorimeters operates at a constant pressure while the Bomb Calorimeter operates at constant volume.

Answer:

By closely observing the sedimentary rock and the presence of organic materials and mineral grains in sedimentary rocks

Explanation:

The rock cycle explains how the three types of rock are formed over time from each other.

To use a sedimentary rock to prove that the rock cycle is a valid scientific model is by, closely observing the sedimentary rock. when the sedimentary rock is closed observed the principle of superposition will be seen ( i.e. younger segments deposited on top ), the presence of organic materials and mineral grains that can be found in Igneous or Metamorphic rocks can also be seen and this shows that Sedimentary rocks pass through the rock cycle. hence this proves that the rock cycle is a valid scientific model overtime  

Answer:

It have lower mass because much of the ashes came from the burned wood. (ashes were like little parts of the wood). plus most of the fuel was turned in to fire (light and heat energy) so yeah ash is just the left over.

Explanation:

Answer:

(14.5 mol) x (6.022 x 10^23 atoms/mol) = 8.73 × 10^24 atoms

Explanation:

pls mark brainliest

Answer:

See explanation

Explanation:

Now, the equation of the reaction is;

Cu(s) + 2AgNO3(aq) --------> Cu(NO3)3 (aq) + 2Ag(s)

Number of moles of silver precipitate = 0.24/108 g/mol= 0.0022 moles

Number of moles of AgNO3 = 50/1000 * 0.050 = 0.0025 Moles

If 2 moles of AgNO3 yields 2 moles of Ag

Then  0.0025 moles of AgNO3 yields  0.0025 * 2/2 = 0.0025 moles of Ag

Number of moles of Cu = 2.00g/63.5 g/mol = 0.03 moles

If 1 mole of Cu yields 2 moles of Ag

0.03 moles of Cu yields  0.03 moles * 2/1 = 0.06 moles of Ag

Hence AgNO3 is the limiting reactant

Theoretical yield of Ag = 0.0025 moles of Ag * 108 = 0.27 g

Actual yield of Ag = 0.24 g

Percent yield = actual yield/theoretical yield * 100

Percent yield = 0.24/0.27 * 100

Percent yield = 88.8%

Answer:

organelle are located in da cytoplasm of eukaryotic and prokaryotic cells

Hope this helps!