2. Coal
It is non renewable energy source.
Answer: the answer would be coal
Explanation: hoped this helped!
How is coal extracted?
How do Humans use it?
What are the benefits?
Coal is extracted by mining.
Once coal has been extracted, it can be used directly for heating and industrial processes or to fuel power plants for electricity.
Benefits are:
Coal energy is an affordable energy source because of the coal's stable price compared to other fuel sources.
Coal is easy to burn.
Coal produces high energy upon combustion.
Coal energy is inexpensive.
What is the mass in grams of 1.204 x 1024 molecules of
hydrogen gas (Hz)?
a 14.2 g
b 6.77 g
C 4.03 g
3.45 g
18. How many grams are in 563 mL of chlorine gas at STP?
Answer:
[tex]at \: stp : \\ 22400 \: ml \: are \: occupied \: by \: 71 \: g \: of \: chlorine \\ 563 \: ml \: will \: be \: occupied \: by \: ( \frac{563}{22400} \times 71) \:g \\ = 1.78 \: g[/tex]
MgCl2 + NaOH → Mg(OH)2 +Naci
Balance
Methane, a highly flammable gas, is placed in a piston that has a volume of 2.1
L at STP. The piston then compresses the gas to 125 mL. What is the pressure
inside of the piston?
can somebody help me with this.
Answer:
HI
H₂O
H₃O⁺
I⁻
Explanation:
Bronsted-Lowry acids are chemicals that can donate protons, and Bronsted-Lowry bases are chemicals that can accept them. Conjugate bases and acids are the resulting effect of losing or gaining a proton in the form of H⁺.
What is the major difference, in terms of weathering type, between Albany, NY and Washington, D.C.? What might explain this difference?
The breakdown or dissolution of rocks and minerals of the planet's surface is called weathering it can be chemical, biological or physical.
Chemical weathering occurs in regions with high rainfall and high temperature.
In Albany, NY the temperature is 9°C with 98 cm rainfall while in Washington, DC the temperature is 15°C with 111 cm rainfall that is Washington is hotter compared to Albany so it will have chemical weathering.Water (rainfall) and temperature is the main cause of weathering as they loosen and breaks the mineral of rock surfaces.The rocks and minerals get dissolved in the water bodies because of erosion by which they get carried in oceans.Therefore, Albany will have mechanical while Washington will suffer from chemical weathering.
To learn more about weathering types follow the link:
https://brainly.com/question/516958
solid iron with copper (II) sulfate. Assume the iron will form a +2 charge on the product side. Write the balanced equation for this reaction
Answer:
hey here is the answer to your question.
Explanation:
1) Write a balanced equation for the reaction occurring. (*Iron occurs in a few different oxidation states, but I will assume we're referring to Fe(II) or Fe2+)
Fe + CuSO4 -> Cu + FeSO4
2) Calculate the number of moles of each reactant.
Fe: 1.924 g * (1 mol / 55.85 g) = 0.03455 mol Fe
CuSO4: 0.1363 L * (0.0750 mol / 1 L) = 0.01022 mol CuSO4
3) Determine the limiting reactant. Because we have fewer moles of copper(II) sulfate and are reacting both reactants in a 1:1 ratio, we will run out of copper(II) sulfate first, making it the limiting reactant.
4) Convert moles of the limiting reactant to moles and grams of product of interest.
0.01022 CuSO4 (1 mol Cu / 1 mol CuSO4 ) (63.55 g Cu / 1 mol Cu) = 0.6495 g Cu
Two reasons that a plant from a rain forest would not survive in a desert home?
Answer: A planet from a rain forest would not survive in a desert home, for the fact they depend on water and as these live from water, without it, this leads to dehydration and with loss of water with plants, nothing is able to survive when it comes to a rain forest plant being in a desert home. Another reason is the high trees and leaves that are providing the plants enough sunlight or shade to grow, it guarantees to help keep the temperature normal. Being in a deserted area would mean that there would be a temperature change, something the plant is not used to. Without that needed shade and avoiding the scorching sun, they will die out from how different the temperature is, and how hot it is.
Explanation: I hope this helped you.
okay, the answer should be simple and easy, plants from a rainforest would not survive in a desert because the plants in the rainforest do get water, sunlight and air whereas the plants in the desert have Sunlight which is very hot. so if a plant in the rainforest was transferred to the desert it will hard to survive and it will eventually die because they will not get water that will be needed and the plant can get sunburns with the too hot temperature.
16) What is the acceleration of an object with a mass of 31.5 kg when an unbalanced force
of 223 N is applied to it?
Answer:
a= 7.07 m/s^2
Explanation:
Newton's second law of motion states that the acceleration of an object is produced by the net force.
the formula to calculate the force: F=ma
you just rearrange it to solve for a
a= F/m a=223/31.5
=7.07
The reaction between solid aluminum and liquid bromine is exothermic. This reaction creates
the product aluminum bromide.
What equation includes the correct formulas and demonstrates conservation of mass?
A Al(s) + Br2(1) - AlBr3(s)
B Al(s) + Br(l) - AlBr(s)
C Al(s) + 3Br(1) - AlBr3(s)
D
2Al(s) + 3Br2(1) - 2AlBr3(s)
Answer:
correct answer is d)
Explanation:
This answer demonstrates law of conservation of mass because the mass of the products is equal to the mass of reactants with the help of the coefficients which is the process known as balancing. This answer also includes the correct formulas, as Br is a gas so it MUST be written as Br2. hope this helps:)
2Al(s) + 3Br2(1) - 2AlBr3(s) is the correct formulas and demonstrates conservation of mass.
What is Conservation of Mass?Every action has an equal and opposite response, states Newton's Third Law. This indicates that any force applied to an item will have an equal and opposite-directed response force of the same magnitude. A force pair is the collective name for these connected forces.
Each individual object will have a different force pair with each other object in systems of numerous objects where all things interact. In the case of charged particles, the charge of each object will dictate the direction of each force in the force pair.
Similar charges will cause particles to repel one another by directing their forces away from one another. With their forces pointing in the same direction, particles with opposing charges attract one another.
Therefore, 2Al(s) + 3Br2(1) - 2AlBr3(s) is the correct formulas and demonstrates conservation of mass.
To learn more about mass, refer to the link:
https://brainly.com/question/19694949
#SPJ2
how do I calculate the density
Please help this will determine my grade so I beg help me out and my grade
Answer:
C: checking your email
Explanation:
I believe that C would be impossible, as you cannot use wireless networks without radio waves
A sample of river wayer contains 125mg per dm^3 of dissolved soilds. Calculate the mass of dissolved soilds in grams in 250 cm^3 of this sample of river water. Giver your answer to 2 significant figures (4 marks)
I will give brainilist to anyone who answers
The mass of a substance is the product of its density and volume. Thus, the mass of the dissolved solids with a density of 125 mg/dm³ with a volume of 250 cm³ is 31.25 mg.
What is density?Density of a substance is the measure of its mass per unit volume. Thus it describes how much denser the substance is in a given volume. Mathematically it is the ratio of mass to the volume.
Density of a substance depends on the mass, volume, bond type, temperature and pressure. The ratio of density of a substance with the density of water is called its specific gravity.
It is given that the density of the dissolved solids is 125 mg/dm³ and the volume is 250 cm³ or 0.25 dm³. Thus the mass can be calculated as follows:
density = mass/volume
mass = density × volume
= 0.25 dm³ × 125 mg/dm³
= 31.25 mg
Hence, the mass of the dissolved solids in the river wayer is 31.25 M=mg.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ2
For which substance is the standard heat of formation not equal to zero?
Hydrogen (H2)
Aluminum oxide (Al2O3)
Oxygen (O2)
Potassium (K)
Answer:
Aluminum oxide (Al₂O₃)
Explanation:
The standard heat (or enthalpy) of formation of a compound, is the amount of change in the enthalpy that takes place when 1 mole of the compound is produced from the elements it contains whereby the compounds and elements in the reaction are in their standard states
The standard state of an element, is the state in which the element is in the most stable form at a pressure of 1 bar
Therefore, the heat of formation of hydrogen, H₂, oxygen, O₂, and potassium, (K), will have a heat of formation of zero, while Al₂O₃ which is made of aluminum and oxygen in combining to form a compound in proportions which are different from their initial standard states will have a heat of formation not equal to zero
-Carbon and Oxygen combine to from carbon dioxide
Answer:
Carbon and oxygen combine to form two oxides, carbon monoxide and carbon dioxide in which the ratio of the weights of carbon and oxygen is respectively 12:16 and 12:32.
What two things combine with oxygen to form ground-level ozone?
A) NOx and ODS
B) CFCs and halons
C) NOx and VOC
D) HFCs and HCFCs
Answer:
c) NOx and VOC
oxides of nitrogen (NOx) and volatile organic compounds (VOC)
Explanation:
-
what is non polar covalent bond
Answer:
It is formed between two atoms of the same elements having same electronegativity in which the bonding electrons are equally shared between them. In this case, the centre of the positive charge coincides with the centre of the negative charge in theecular molecule. H, N: 0. etc. are the molecules in which non polar covalent bonds invalved. These substances are called non polar substances.
Answer:
A nonpolar covalent bond is a covalent bond in which the bonding electrons are shared equally between the two atoms. In a nonpolar covalent bond, the distribution of electrical charge is balanced between the two atoms.
Explanation:
Which of the following are physical properties?
Radioactivity
Color
Temperature
Flammability
Texture
Reactivity
Answer:
Explanation:
The properties that are observed or measured without changing the composition of matter are called physical properties.
color, Temperature, Texture are the physical properties as the composition of matter remains the same.
On the other hand, Radioactivity, Flammability and Reactivity comes under chemical property as during the chemical reactions there might be some changes in the properties.
A group of 6th-grade students constructs arguments on why water conservation is important. Which student argument is correct?
A.
Student 1 argues that people need water for recreation and transportation only.
B.
Student 2 argues that as the population increases in the world, so does the need for water.
C.
Student 4 argues that we use less water for agriculture and more on personal needs.
D.
Student 3 argues that there is an unlimited supply of water for animals, ecosystems, and people to use daily.
From a chemicals standpoint, Student 2 contends that as global population grows, so does the need for water. This is the correct reasoning.
What is the purpose of chemistry?
Our basic needs of food, clothes, shelter, health, energy, and pure air, water, and soil are all met by chemistry. Chemical technologies improve our quality of life in many ways by offering fresh approaches to issues with health, resources, and energy use.
What subjects are studied in chemistry?
The study of matter, including its properties, behaviours, and structures, is known as chemistry. Chemists induce and monitor these reactions both in nature and artificially in a lab setting because they are interested in how materials behave and react in specific settings.
To know more about chemicals visit:
brainly.com/question/29240183
#SPJ1
What is the difference between light photons and infrared photons?
Answer:
Light Photons: Light behaves mainly like a wave but it can also be considered to consist of tiny packages of energy called photons. Photons carry a fixed amount of energy but have no mass. The energy of a photon depends on its wavelength: longer wavelength photons have less energy and shorter wavelength photons have more.
Infrared photons: Infrared waves, or infrared light, are part of the electromagnetic spectrum. People encounter Infrared waves every day; the human eye cannot see it, but humans can detect it as heat. A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light, which marks the beginning of the non-visible spectrum, has a wavelength that falls between 700 nm and 1 mm. Because of this, infrared can only be viewed with specialized tools like security cameras.
What is infrared light ?A type of radiant energy that we experience as heat, but that is invisible to human eyes is infrared radiation (IR), often known as infrared light. The sun and fire are two of the most prominent sources of IR radiation, however all objects in the cosmos release some of it.
The energy of the photons determines the various types of radiation, starting with radio waves with low energies. In comparison to visible, ultraviolet, X-ray, and gamma ray photons, which are the most energetic of all, microwave photons have somewhat higher energy. Infrared photons have even more energy.
Cooler objects produce lower energy, longer wavelength photons, while hotter ones release higher energy, shorter wavelength photons.
Thus, On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light.
To learn more about infrared light, follow the link;
https://brainly.com/question/7071188
#SPJ2
2AgNO3 (aq) + BaCl2 (aq)
-->
2AgCl (s) + Ba(NO3)2 (aq)
2AgCl (s) + Ba(NO3)2 (aq)
7. List all of the variables that you controlled or kept the same.
Salt water
Answer:
Temperature is a common type of controlled variable. If a temperature is held constant during an experiment, it is controlled. Other examples of controlled variables could be an amount of light, using the same type of glassware, constant humidity, or duration of an experiment.
Explanation:
What volume of 15.9 M Nitric acid would be required to make 7.2 L of 6.00 M nitric acid? (hint: dilution problem) will mark brainliest if correct
a. 2.72 L
b. 686.88 L
c. .075 L
d. 272
Answer:
d
Explanation:
6.
An element with high conductivity would be found in which
category?
Alkaline earth metals
transition metals
Group 1 metal
Alkali metals
***Why would you not pick the others?
In a neutral solution, the concentration of H+ is
Group of answer choices
Answer:
equal to [OH-]
Hydrogen ion concentration is more conveniently expressed as pH, which is the logarithm of the reciprocal of the hydrogen ion concentration in gram moles per liter. Thus, in a neutral solution the hydrogen ion (H+) and the hydroxyl ion (OH−)
20 mL of hydrogen measured at 15° C is heated to 35°C.
What is the new volume at the same pressure?
V2 = 21.4 ml
Explanation:
Note: When dealing with gases, make sure that you change the units from °C to K.
T1 = 15°C + 273 = 288K
T2 = 35°C + 273 = 308K
V1 = 20 ml
V2 = ?
We use Charles's law to solve V2:
V1/T1 = V2/T2
or
V2 = (T2/T1)V1
= (308K/288K)(20 ml)
= 21.4 ml
Whilst Et₃CCl is unreactive towards water even at elevated temperatures, Et₃SiCl is hydrolyzed rapidly. Explain the origin of these differences and provide a reaction scheme with mechanistic details for the hydrolysis of Et₃SiCl.
Answer:
See Explanation
Explanation:
In discussing the reason why Et₃SiCl is more easily hydrolysed than Et₃CCl, we must remember that the electronegativity difference between silicon and chlorine is much higher than the electronegativity difference between carbon and chlorine.
As a result of this, the Si-Cl bond in Et₃SiCl is more polar and hence susceptible to attack by water than the C-Cl bond in Et₃CCl.
Also, it is postulated that the presence of vacant d orbitals on silicon assists hydrolysis in Et₃SiCl. Such vacant orbitals are absent in carbon hence Et₃CCl does not undergo hydrolysis.
The reaction scheme is shown in the image attached to this answer.
Which is true for a substance that releases energy?
OA. The energy release decreases the molecular motion and the kinetic energy of the substance.
B. The energy release decreases the molecular motion but increases the kinetic energy of the substance.
C. The energy release increases the molecular motion and the kinetic energy of the substance.
D. The energy release increases the molecular motion but decreases the kinetic energy of the substance.
E. The energy release is used only to change the state of the substance.
What is the pH of 0.0000043M HNO3 ? (3 sig figs, round the last digit only if needed)
Answer:
pH = 5.37
Explanation:
We'll begin by obtaining the concentration of the hydrogen ion in the solution. This can be obtained as follow:
HNO₃ (aq) —> H⁺ (aq) + NO₃¯ (aq)
From the balanced equation above,
1 mole of HNO₃ produced 1 mole of H⁺.
Therefore, 4.3×10¯⁶ M HNO₃ will also produce 4.3×10¯⁶ M H⁺.
Finally, we shall determine the pH of the solution. This can be obtained as follow:
Concentration of Hydrogen ion [H⁺] = 4.3×10¯⁶ M
pH =?
pH = –Log [H⁺]
pH = –Log 4.3×10¯⁶
pH = 5.37
Therefore, the pH of the solution is 5.37