Answer:
The Industrial Revolution
The correct Lewis structure for the sulfur atom has
Answer:
For a dot structure, I will explain it.
Explanation:
So there's an S (the symbol for Sulfur) and on the top, there are two dots, as well as two on the left side. On the bottom and right of the symbol, there is only 1 dot on each of these sides.
The correct Lewis structure for the sulfur atom has six dots. These six dots are distributed in such a way that two dots are present at the top, two are on the left side, and one each is on the bottom and right side.
What is Lewis's structure?Lewis's structure may be defined as a structural representation of a molecule where dots are used to show electron positions around the atoms and lines or dot pairs represent covalent bonds between atoms.
Sulfur has an atomic number of 16. Its electronic configuration is 2, 8, and 6. It represents that the sulfur atom has six valence electrons. These six electrons are represented by dots in the Lewis structure.
Each sulfur atom is connected to an identical atom on either side by single covalent bonds. This ensures the sulfur completes its octet.
Therefore, the correct Lewis structure for the sulfur atom has six dots.
To learn more about Lewis's structure, refer to the link:
https://brainly.com/question/6224949
#SPJ2
In an experiment, the molar mass of the compound was determined to
be 228.276 g/mol. What is the molecular formula of the compound? Please help!
The temperature of water decreases on the dissolution of NH4NO3. From this observation, we can conclude that the solution process would be best described asa)exothermic with a positive entropy change.b)exothermic with a negative entropy change.c)endothermic with a negative entropy change.d)endothermic with a positive entropy change.e)exothermic with a negative free energy change
Answer: d)endothermic with a positive entropy change
Explanation:
Endothermic reactions are those in which heat is absorbed by the system and exothermic reactions are those in which heat is released by the system.
Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.
As temperature of water decreases on dissolution of [tex]NH_4NO_3[/tex] , it means heat has been absorbed by [tex]NH_4NO_3[/tex] during dissolution and that heat is taken from water. Thus process is endothermic. As dissolution will lead in the formation of ions [tex]NH_4^+[/tex] and [tex]NO_3^-[/tex] , randomness will increase and thus there is a positive entropy change.
AIDS is one disease caused by a virus infection. The virus attacks immune system cells known as T cells.
Based on your observations from the Gizmo, how would you explain the data shown on this graph?
Answer:
yes,its true
Explanation:
I just want to say first off
the immune cell known as T cell also known as white blood cells
Since the first main attack from the bodies response against a virus is deploying T cells to attack
CD4 cells are the basic T cells and HIV virus which is AIDS will start to "Eat itself inside" Ofc not they will use protein spikes to form their way in
they start to create copies of themselves inside the T cell itself and creating a new protein called Env to form their ways in ofc
They are able to bypass CD4 cells is because its a basic cellular receptor for T cells making them really deadly
They now will start to attack other white cells and deploying more and more of their virus cells
this organ has 2 parts, the cervix, which is the lower part that opens into the vagina, and the main body, called the corpus.
Answer:
The correct answer is - the uterus.
Explanation:
The uterus or the womb is an organ that appears to be pear-shaped and it is hollow from inside where the fetus is developed and it is also called the birth canal. The uterus has two parts one is the cervix and the other is the corpus.
The cervix makes the lower part of the uterus and opens up into the vagina the external reproductive organ of the females. The corpus is the part that makes the main body of the uterus. The uterus is present between the bladder and rectum where the egg fertilized and implanted itself.
Calculate the formula weight or molecular for the following:
a. LiCI
b. SO2 (The 2 is in subscript)
Answer:
42.39, 64.06
Explanation:
Formula Weight can be calculated by adding the atomic mass of the elements in the formula.
LiCl
AM for Li is 6.94 amu, AM for Cl is 35.45 amu
[tex](6.94)+(35.45)=42.39[/tex]
SO₂
AM for S is 32.06 amu, AM for O is 16 amu
[tex](32.06)+2(16.00)=64.06[/tex]
Why does our body need to use both mechanical and chemical digestion when we are breaking down our food?
Answer:
Chemical digestion is a vital part of the digestive process. Without it, your body wouldn't be able to absorb nutrients from the foods you eat, also chemical digestion uses enzymes to break down food
mechanical digestion involves physical movements, such as chewing and muscle contractions,
Explanation:
Would You rather
Be blind for 10 years and get 10 million dollars?
Or get 100 dollars when every time someone lies to you?
Or just a have nothing
How many moles of H20 are needed to produce 1 mole of O2 in the following equation?
2H2O + 2H2 + 102
A gas occupies 5.31 liters at a pressure of 0.55 atm. Determine the volume at standard pressure.
A. 2.92
B. 8.28L
C. 3.54 L
D. 9.65L
Answer:
Option A; V = 2.92 L
Explanation:
If we assume a lot of things, like:
The gas is an ideal gas.
The temperature is constant.
The gas does not interchange mass with the environment.
Then we have the relation:
P*V = n*R*T = constant.
Where:
P = pressure
V = volume
n = number of moles
R = constant of the ideal gas
T = temperature.
We know that when P = 0.55 atm, the volume is 5.31 L
Then:
(0.55 atm)*(5.31 L) = constant
Now, when the gas is at standard pressure ( P = 1 atm)
We still have the relation:
P*V = constant = (0.55 atm)*(5.31 L)
(1 atm)*V = (0.55 atm)*(5.31 L)
Now we only need to solve this for V.
V = (0.55 atm/ 1 atm)*(5.31 L) = 2.92 L
V = 2.92 L
Then the correct option is A.
The breaking of _____________________ bonds in food releases energy for your body to use.
thermal
electromagnetic
electrical
chemical
Answer:
Chemical bonds
Explanation:
the chemicals in your food are what give you energy when they break down, that's how it releases energy Into your body.
How does nitrogen-fixing bacteria make nitrogen available to plants and animals?
Answer:
hi thxs for the points now bye
Answer:
Nitrogen-fixing bacteria in the soil and within the root nodules of some plants convert nitrogen gas in the atmosphere to ammonia. Nitrifying bacteria convert ammonia to nitrites or nitrates. Ammonia, nitrites, and nitrates are all fixed nitrogen and can be absorbed by plants.
Explanation:
Hope It Help
The information shows the masses after the compounds are balanced.
2MgO + 2Cl2 → 2MgCl2 + ?
80g + 140g + 1889 + ?
If the following materials are used during the reaction of magnesium,
oxygen, and chlorine, what mass oxygen would we expect to see after
the reaction and why?
O A. 40g of Oz, because all mass must be conserved, it would be half of the
compound Mgo in the products
O B. 32g of Oz, because all mass must be conserved
c. 32g of Oz, because all mass must be conserved, it would be half of the
compound Mgo in the products
D. 40g of Oz, because all mass must be conserved
32g mass of oxygen would we expect to see after the reaction, because all mass must be conserved.
How we calculate the mass of any substance from moles?
Mass of any substance can be calculated from moles as:
n = W/M, where
n = moles
W = given weight or mass
M = molar mass
Given balanced complete chemical reaction is:
2MgO + 2Cl₂ → 2MgCl₂ + O₂
From the stoichiometry of the reaction it is clear that 2 moles of MgO & Cl₂ is required for the formation of 2 moles of MgCl₂ & 1 mole of O₂. Also the masses of the compound is also given for the balanced reaction as:
Mass of MgO for 2 mole = 80g
Mass of Cl₂ for 2 mole = 140g
Mass of MgCl₂ for 2 mole = 188g
So, it is clear that given masses will show conservation for their standard 1 mole of masses as mass of MgO, Cl₂ & MgCl₂ for 1 mole is 40.3g/mol, 70.90g/mol & 95.2g/mol respectively.
Hence, we conclude that mass for 1 mole of O₂ should be 32g.
Therefore, option (B) is correct i.e. 32g of O₂, because all mass must be conserved.
To know more about mole to mass conversion, visit the below link:
https://brainly.com/question/13314627
if you reply with a link, I will report you
Answer:
1 2 2
Explanation:
Explain the effect of increasing or
decreasing volume of a gas. What
happens to the pressure?
Answer:
Increase
Explanation:
More collisions mean more force, so the pressure will increase. When the volume decreases, the pressure increases. This shows that the pressure of a gas is inversely proportional to its volume.
Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
The given question is incomplete. The complete question is:
Write the electron configuration for [tex]Ca^+[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]Ca^{2+}[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]Se^{2-}[/tex] . (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.) Write the electron configuration for [tex]S^{2-}[/tex]. (Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)
Answer:
[tex]Ca^+:19:[Ar]4s^1[/tex]
[tex]Ca^{2+}:18:[Ar][/tex]
[tex]Se^{2-}:32:[Ar]3d^{10}4s^24p^2[/tex]
[tex]S^{2-}:18:[Ar][/tex]
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom.
The electrons are filled according to Afbau's rule in order of increasing energies. The positively charged species are formed by loss of electrons and negatively charged species are formed by gain of electrons.
[tex]Ca:20:[Ar]4s^2[/tex]
[tex]Ca^+:19:[Ar]4s^1[/tex]
[tex]Ca^{2+}:18:[Ar][/tex]
[tex]Se:34:[Ar]3d^{10}4s^24p^4[/tex]
[tex]Se^{2-}:36:[Ar]3d^{10}4s^24p^6[/tex] or [tex]Se^{2-}:36:[Kr][/tex]
[tex]S:16:[Ne]3s^23p^4[/tex]
[tex]S^{2-}:18:[Ne]3s^23p^6[/tex] or [tex]S^{2-}:18:[Ar][/tex]
HELLPPPP PLZZ
Which fossil fuel are items such as plastics and rubber made from?
coal
oil/petroleum
natural gas
gasoline
Answer:
C
Explanation:
Answer:
Hey mate....
Explanation:
This is ur answer...
Natural GasNatural GasPlastics are produced from natural gas, feedstocks derived from natural gas processing, and feedstocks derived from crude oil refining.
Hope it helps you,
Mark me as the brainliest...
FOLLOW ME!!!!
Now run this simulation that demonstrates the properties of gases. The simulation shows a container with a lid on top. The lid can be opened and closed by dragging it left and right. On the left side of the container is a yellow handle. Drag this handle right or left to decrease or increase the volume of the container. On the top right of the container are a thermometer and a pressure gauge. Follow these steps to use the simulation, and then answer the question that follows. 1. Reduce the container to its least volume by dragging the yellow handle as far right as you can. 2. In the Gas in Chamber menu, add 80 molecules of heavy species to the container. 3. In the Constant Parameter menu, select Pressure. 4. Increase the number of heavy species molecules to 200. What do you observe when the molecules are increased from 80 to 200 at constant pressure?
link http://contentstore.ple.platoweb.com/content/sharedmedia/phet_sims_batch2/gas-properties/gas-properties_en.html
Answer:
The pressure will increase linearly if you increase the moles/molecules of gas
Explanation:
Are real or ideal gases used in labs?
Help I’m timed!
How are all planets in the solar system similar they have a gas atmosphere, they have a water atmosphere, we have a gas surface composition, they have a rock surface composition.
Answer:
they hace a rock surface composition
I WILL GAVE BRAINLIEST FOR CORRECT ANSWER
Use the information to answer the following question.
Hot air balloons use a flame that can turn on and off to heat air inside a large balloon. The balloon is attached to a basket which can carry people or cargo as it is lifted off the ground and floats in the air.
Using what you know about gases, predict which approach would allow the hot air balloon to reach the highest height?
A.
Turn on the flame for 10 seconds each minute for 10 minutes to increase the density of the air inside the balloon.
B.
Turn on the flame for 10 seconds each minute for 2 minutes, and cut a large hole in the balloon material to allow excess air out.
C.
Turn on the flame for 30 seconds each minute for 10 minutes to decrease the density of the air inside the balloon.
D.
Turn on the flame for 30 seconds each minute for 2 minutes, and cut a large hole in the balloon material to allow excess air out.
Answer:
c
Explanation:
Answer:
C. Turn on the flame for 30 seconds each minute for 10 minutes to decrease the density of the air inside the balloon.
Explanation:
Gasoline is combusted in a standard engine as shown in the diagram and reaction above . Calculate the theoretical yield of CO2 from completely burning 10.0 g of gasoline (C8H18)
Answer:
30.8 g of CO2.
Explanation:
Using malar masses of gasoline and carbon dioxide:
2 * (12*8 + 1*18) g gas yields 16(12 + 2*16) g of CO2
228........................................... 704 g CO2
1g ................................................ 704/228
10g .................................................... (704*10)/228 = 30.8 g.
True or False: Air pollution contributes to global warming.
A. True
B. False
_____ is the state of matter of the sun and stars
A. solid
B. liquid
C. gas
D. plasma
Answer:
the answer is gas
Explanation:
It is usually said that the sun is a fiery ball of gases, but, actually, most of it is plasma, which isn't quite the same thing, although hot gas and plasma are often used interchangeably. Plasma is known as the fourth state of matter, following solid, which is the first and coldest state.
Nitrogen dioxide and water react to form nitric acid and nitrogen monoxide, like this:
2HNO3 (aq) + NO (g) → 3NO2 (g) + H2O (l)
At a certain temperature, a chemist finds that a 9.5L reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition:
Compound Amount
HNO3 15.5g
NO 16.6g
NO2 22.5g
H2O 189.0g
Required:
Calculate the value of the equilibrium constant Kc for this reaction.
Answer: The value of the equilibrium constant Kc for this reaction is 3.72
Explanation:
Equilibrium concentration of [tex]HNO_3[/tex] = [tex]\frac{15.5g}{63g/mol\times 9.5L}=0.026M[/tex]
Equilibrium concentration of [tex]NO[/tex] = [tex]\frac{16.6g}{30g/mol\times 9.5L}=0.058M[/tex]
Equilibrium concentration of [tex]NO_2[/tex] = [tex]\frac{22.5g}{46g/mol\times 9.5L}=0.051M[/tex]
Equilibrium concentration of [tex]H_2O[/tex] = [tex]\frac{189.0g}{18g/mol\times 9.5L}=1.10M[/tex]
Equilibrium constant is defined as the ratio of concentration of products to the concentration of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_c[/tex]
For the given chemical reaction:
[tex]2HNO_3(aq)+NO(g)\rightarrow 3NO_2(g)+H_2O(l)[/tex]
The expression for [tex]K_c[/tex] is written as:
[tex]K_c=\frac{[NO_2]^3\times [H_2O]^1}{[HNO_3]^2\times [NO]^1}[/tex]
[tex]K_c=\frac{(0.051)^3\times (1.10)^1}{(0.026)^2\times (0.058)^1}[/tex]
[tex]K_c=3.72[/tex]
Thus the value of the equilibrium constant Kc for this reaction is 3.72
You see the middle layer of the sun’s atmosphere, the _____________, at the start and end of a total eclipse.
Answer:
Chromosphere
Explanation:
You see the middle layer of the sun’s atmosphere, the Chromosphere, at the start and end of a total eclipse.
What is the name of the anion in sodium carbonate?
Answer: Sodium salt
Explanation: sorry if this is wrong
In which of the following options can competition occur?
b
с
Between two
organisms that are
attempting to use
different resources
that are in short
supply
Between two
organisms that are
attempting to use
the same resource
that is in short
supply
Between two
organisms that are
attempting to use
the same resource
that is in limitless
supply
Answer: no answer
Explanation:
no anwser
6. How have dolphins adapted to undenvater lite
HELP!!!
Answer:
Dolphins have streamlined body shapes that are very hydrodynamic, allowing them to swim fast. Additionally, dolphins have very tight skin and adults have no body hair, both of which help to reduce drag on the marine mammals as they move through the water. Incidentally, dolphins have mated and gone in pairs, and then got more protection.
(04.04 MC)
Which table best shows the impacts resulting from human activity? (6 points)
Answer:
B
Explanation:
Answer:
B its correct because i did the test.
Explanation: