Answer:
c seems like the best answer
who is sire sirol from among us?
Answer:
I'm not sure,
Explanation:
Can I have brainliest? It would help me out, if not thanks anyways! Hope this helped and have a nice day!
413 mg of dried KHP is dissolved in 41 mL of distilled water and titrated with potassium hydroxide (KOH). If it took 20.05 mL of KOH to reach the endpoint, determine the concentration of KOH. Show calculations.
Answer: The concentration of KOH is 0.1 M.
Explanation:
Given: Mass of KHP = 413 mg (1 mg = 0.001 g) = 0.413 g
Volume of KOH = 20.05 mL
Volume of solution = 41 mL
The molecular mass of KHP is 204.22 g/mol
Hence, moles of KHP are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{0.413 g}{204.22 g/mol}\\= 0.002 mol[/tex]
As molarity is the number of moles of a substance present in a liter of solution.
So, molarity of the given solution is as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{0.002 M}{0.041 L}\\= 0.0493 M[/tex]
When the given solution is titrated with KOH then concentration of KOH is calculated as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula.
[tex]M_{1}V_{1} = M_{2}V_{2}\\0.0493 M \times 41 mL = M_{2} \times 20.05 mL\\M_{2} = \frac{0.0493 M \times 41 mL}{20.05 mL}\\= 0.1 M[/tex]
Thus, we can conclude that the concentration of KOH is 0.1 M.
Name the guy thats Speedrunning yt right now
Answer:
Lyric
Explanation:
My best guess
PLEASE HELP!!!
A 84.1 g sample of phosphorus reacts with 85.0 g of oxygen gas according to the following chemical equation.
4 P(s) + 5 O2(g) → 2 P₂O5
a. Find the limiting reactant.
b. How many grams of P₂O5 are produced in theory?
c. If only 123 g of P2O5 are produced, what is the percentage yield?
Answer:
(a) oxygen
(b) 154g (to 3sf)
(c) 79.9% (to 3sf)
Explanation:
mass (g) = moles × Mr/Ar
note: eqn means chemical equation
(a)
moles of P = 84.1 ÷ 30.973 = 2.7152 moles
moles of O2 = 85÷2(16) = 2.65625 moles
Assuming all the moles of P is used up,
moles of O2 / moles of phosphorus = 5/4 (according to balanced chemical eqn)
moles of O2 required = 5/4 × 2.7152moles = 3.394 moles (more than supplied which is 2.65625moles)
therefore there is insufficient moles of O2 and the limiting reactant is oxygen.
(b)
moles of P2O5 produced
= 2/5 (according to eqn) × 2.7152
= 1.08608moles
mass of P2O5 produced
= 1.08608 × [ 2(30.973) + 5(16) ]
= 154.164g
= approx. 154g to 3 sig. fig.
(c)
% yield = actual/theoretical yield × 100%
= 123/154 × 100%
= 79.870%
= approx. 79.9% (to 3sf)
if a material conducts heat easily, its a good _____.
It has to be a 18 letter word
Answer:
a thermal conductor
Explanation:
thats what its called
Answer the boxes in the image
Answer: the c thingy is where you be like burgundy sauce then be like racial slair is what it mean's so the name thingy
Explanation:
convert 32 degrees celsius to kelvin
Answer:
305.15
Explanation:
32 celsius converted to kelvin is 305.15 kelvin
Formula
32°C + 273.15 = 305.15K
12. Convert 1.98 grams of PbSo, to molecules.
No links please
Answer:
3.93 × 10²¹ molecules
Explanation:
Convert 1.98 grams of PbSO₄ to molecules.
Step 1: Given data
Mass of PbSO₄: 1.98 g
Step 2: Calculate the number of moles corresponding to 1.98 g of PbSO₄
The molar mass of PbSO₄ is 303.26 g/mol.
1.98 g × 1 mol/303.26 g = 6.53 × 10⁻³ mol
Step 3: Calculate the number of molecules in 6.53 × 10⁻³ moles of PbSO₄
To convert moles to molecules, we need a conversion factor: Avogadro's number. There are 6.02 × 10²³ molecules of PbSO₄ in 1 mole of molecules of PbSO₄.
6.53 × 10⁻³ mol × 6.02 × 10²³ molecules/1 mol = 3.93 × 10²¹ molecules
Write the balanced half equation of iron 2 and permanganate in a solution of acid. Show all of your work.
Answer:
5Fe⁺² + MnO₄⁻ + 8H⁺ => 5Fe⁺³ + Mn⁺² + 4H₂O
Explanation:
Fe⁺² + MnO₄⁻ + H⁺ => Mn⁺² + Fe⁺³ + H₂O
5(Fe⁺² => Fe⁺³ + 1e⁻) => 5Fe⁺² => 5Fe⁺³ + 5e⁻
MnO₄⁻ + 5e⁻ => Mn⁺² => MnO₄⁻ + 8H⁺ + 5e⁻ => Mn⁺² + 4H₂O
=> 5Fe⁺² + MnO₄⁻ + 8H⁺ => 5Fe⁺³ + Mn⁺² + 4H₂O
Two ways that salinity can increase
Answer:
Evaporation of ocean water and the formation of sea ice both increase the salinity of the ocean.
Explanation:
TRUE OR FALSE?
The reason for forming multiple bonds is an interaction of end to end type between unhybridized p orbitals.
20 points!
Answer:
I think its false
Explanation:
The student then sets up two more test tubes containing iron nails.
Explain why
test tube 1 does not rust because boiled water has no oxygen and oil stops new oxygen from entering and without oxygen iron cannot rust.
test tube 2 does not rust because the drying agent absorbs all the moisture from air, and moisture is required for iron to rust.
In the absence of oxygen or moisture rusting of the nail can not take place.
There are two very important things that must be present for the process of rusting to take place these are;
Oxygen MoistureIf we can exclude these two, rusting will not take place in the absence of either of them.
Rusting does not occur in tube 1 because the water have been boiled and the oxygen removed then it is stored under oil that prevents corrosion.
In tube 2, there is a drying agent that removes moisture from air hence moisture does not have access to the nail so it does not rust.
Learn more about rusting: https://brainly.com/question/4206267
how many moles of solute are in 9.03 M solution with 15.8 L of solution?
Answer:
Explanation:
How many moles of solute are in 9.03 M solution with 15.8 L of solution?
Yo wassup with these links every time I ask a question there’s a link everywhere it’s making me mad this needs to stop
How many grams of NiNi are formed from 55.3 g55.3 g of Ni2O3Ni2O3?
2Ni2O3(s)⟶4Ni(s)+3O2(g)2Ni2O3(s)⟶4Ni(s)+3O2(g)
Step 1: Show the strategy for solving this problem.
You are currently in a labeling module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop.
grams Ni2O3⟶⟶⟶grams Nigrams Ni2O3⟶⟶⟶grams Ni
Answer Bank
grams O2O2
moles NiNi
grams NiNi
moles Ni2O3Ni2O3
moles O2O2
grams Ni2O3Ni2O3
Answer:
110.92 g
Explanation:
Amount of Ni2O3 consumed= 55.3/59 =0.94 moles
From the reaction equation;
2 moles of Ni2O3 yields 4 moles of Ni
0.94 moles yields 0.94 moles * 4/2
= 1.88 moles of Ni2O3
Mass of 1.88 moles of Ni2O3 = 1.88 moles of Ni2O3 * 59 gmol-1 = 110.92 g
what is the name of the molecule belowwww
Answer:
A) 2-pentene
Explanation:
We count from side where we encounter double bond closest so that's going to be from left to the 2nd carbon. Total carbons are 5.
Thus pent- for prefix of 5 carbons and -ene as suffix for double bond.
2- for locant of double bond.
Thus, 2-pentene
what is the difference between diffusion and osmoses
Answer:
Diffusion means that particles travel from a higher concentration to a lower concentration region before balance is achieved. The semi-permeable membrane is present in osmosis, so that only solvent molecules can travel freely to equalize the levels.
Given the following information: SO2(g) + 12 O2(g) = SO3(g) Kp = 2.5E-2 What is the Kp value for the following reaction: 2 SO2(g) + O2(g) = 2 SO3(g)
Answer:
K = 6.25x10⁻⁴
Explanation:
Based on the reaction:
SO₂ + 1/2 O₂ ⇄ SO₃ Kp = 2.5x10⁻²
We can find the Kp of a similar reaction using Hess's law where the sum of 2 reactions a and b produce a K that is:
K = Ka*Kb
The sum of twice the reaction of the problem:
SO₂ + 1/2 O₂ ⇄ SO₃
+ SO₂ + 1/2 O₂ ⇄ SO₃
2SO₂ + O₂ ⇄ 2SO₃
Where K must be:
K = Kp*Kp = Kp²
K = (2.5x10⁻²)²
K = 6.25x10⁻⁴Plzzzzzzzzzzzzzzzz help
Answer:
Your correct.
Explanation:
Answer:
The answer is C.
Explanation:
I just know.
Determina cuantos moles hay en 2.31g de NaCl
Answer:
0.0395 mol NaCl
Explanation:
¡Hola!
En este caso, es necesario para nosotros considerar que las relaciones masa-mol se desarrollan teniendo en cuenta las masas molares de los compuestos involucrados en el sistema. Ahora, dado que este sistema se compone de NaCl, cloruro de sodio como sal de mesa, es posible saber que la masa molar de este es alrededor de 58.44 g/mol.
De esta manera, las moles en 2.31 g se calculan como sigue:
[tex]=2.31gNaCl*\frac{1molNaCl}{58.44gNaCl}\\\\=0.0395molNaCl[/tex]
¡Saludos!
How many moles of gas are in a 25 L container if the temperature is 289 K and the pressure is 125 atm?
Answer:
1.3 moles
Explanation:
pv = nrt
n = pv/rt
n = (125 * 25) / (8.3144598 * 289)
n = 1.3 moles
In the covalent compound CH3, the Greek prefix used to represent the anion is Answer here
Answer:
Tri.
Explanation:
''Tri'' is the Greek prefix used to represent the CH3 because there are three hydrogen atoms to form the covalent compound so in Greek method ''Tri'' is used for three. In Greek system, there are certain names for prefixes such as ''di'' is used for two, ''tri'' is used for three, ''tetra'' is used for four etc. This method only provides information about the number of atoms that form the covalent compound.
7. Assume that you have collected 867 L of nitrogen gas at STP. What is the mass of the nitrogen gas?
Answer:
1083.6 g
Explanation:
At STP, 1 mol of any given mass will occupy 22.4 L.
With the information above in mind we can calculate how many moles of nitrogen gas (N₂) are there in 867 L:
867 L ÷ 22.4 L/mol = 38.7 molFinally we convert 38.7 moles of N₂ into grams, using its molar mass:
38.7 mol * 28 g/mol = 1083.6 gCan someone answer 4 chemistry questions for brainliest ?
Answer:
Hydrochloric acid + zinc = zinc chloride + hydrogen gas
sulfuric acid + magnesium oxide = zinc sulfate + water
nitric acid + lead carbonate = Lead nitrate + carbon dioxide
Sorry can't remember how to do the last one :(
Explanation:
Why do different parts of the world have such different animals?
Answer:
a
Explanation:
A chemist has a small amount of compound that has the boiling point 65°c that must be fractionally distilled. Yet, the chemist doesn't want to lose any of the compound to hold up on the column. What the chemist should do?
Answer:
A "chaser," a high-boiling compound whose vapors will displace the vapors of the desired low-boiling compound, can be used to distill a small amount of compound.
A smaller fractionation apparatus or a Vigreux column could be used instead.
Explanation:
For each equation, state the reaction type and then balance the equation.
___Na3PO4 + ___HCl → ___H3PO4 + ___NaCl Will give brainliest
NOT A DOWNLOAD CMON
Answer:
Na3PO4+3HCl —> H3PO4+3NaCl
The reaction type for this equation is a double displacement or acid-base reaction, where Na₃PO₄ and HCl exchange ions to form H₃PO₄ and NaCl.
What is double displacement reaction?A double displacement reaction is a type of chemical reaction in which the cations and anions of two different compounds exchange places, producing two new compounds. Double displacement reactions are also known as double replacement, metathesis, or ion-exchange reactions.
To balance the equation, you need to make sure that the number of atoms of each element is equal on both sides of the equation. Here is one possible balanced equation:
2Na₃PO₄+ 6HCl → 2H₃PO₄ + 6NaCl
In this balanced equation, there are:
6 sodium atoms (Na) on both sides
2 phosphorus atoms (P) on both sides
12 oxygen atoms (O) on both sides
6 hydrogen atoms (H) on both sides
Note that you can also write the equation in terms of formulas instead of names:
Na₃PO₄ + 3HCl → H₃PO₄ + 3NaCl
Both equations represent the same chemical reaction, but the second one is more concise.
Find more on double displacement reactions:
https://brainly.com/question/13854110
#SPJ2
calculate the wavelength of yellow light with the energy of 3.45x10-19 J
Answer: The wavelength of yellow light with the energy of [tex]3.45 \times 10^{-19} J[/tex] is [tex]5.76 \times 10^{-7} m[/tex].
Explanation:
Given: Energy = [tex]3.45 \times 10^{-19} J[/tex]
Formula used to calculate the wavelength is as follows.
[tex]E = \frac{hc}{\lambda}[/tex]
where,
E = energy
h = Planck's constant = [tex]6.63 \times 10^{-34} Js[/tex]
c = speed of light = [tex]3 \times 10^{8} m/s[/tex]
[tex]\lambda[/tex] = wavelength
Substitute the values into above formula as follows.
[tex]E = \frac{hc}{\lambda}\\3.45 \times 10^{-19} J = \frac{6.63 \times 10^{-34} Js \times 3 \times 10^{8} m/s}{\lambda}\\\lambda = 5.76 \times 10^{-7} m[/tex]
Thus, we can conclude that the wavelength of yellow light with the energy of [tex]3.45 \times 10^{-19} J[/tex] is [tex]5.76 \times 10^{-7} m[/tex].
answer this correctly, only sincere answers please. I really need help. I will do all I can to make someone answer this. Thanks! ASAP
Explain the relationship between pH, POH, hydronium concentration and hydroxide concentration and be prepared to complete the chart below based on the provided knowns.
Complete the chart below based on the provided knowns.
H+ ______x_______
OH - 1 x 10^-11______
pH 3_____________
POH _____y_______
Answer:
See Explanation
Explanation:
Let us recall that;
[H^+] [OH^-] = 1 * 10^-14
Where;
[OH^-] = 1 x 10^-11
Then;
[H^+] = 1 * 10^-14/1 x 10^-11
[H^+] = 1 * 10^-3
pH = -log [H^+]
pH = -log(1 * 10^-3)
pH = 3
Also;
pH + pOH = 14
pOH = 14 - pH
pOH = 14 -3
pOH = 11
I don’t know how to do this, LIKE IT WAS NOT EVEN IN THE VIDEO :/
The formation of soap can be done with the process of saponification in which triglyceraldehyde reacts with 3 molecules of Sodium Hydroxide (NaOH) and produces Glycerol and 3 molecules of Sodium palmitate (Soap).
(Reaction is attached as image)
What is Saponification ?Saponification is a process that involves the conversion of fat, oil, or lipid, into soap and alcohol by the action of aqueous alkali.
Soaps are salts of fatty acids, which in turn are carboxylic acids with long carbon chains.
Hence, The formation of soap can be done with the process of saponification in which triglyceraldehyde reacts with 3 molecules of Sodium Hydroxide (NaOH) and produces Glycerol and 3 molecules of Sodium palmitate (Soap).
Learn more about Saponification here ;
https://brainly.com/question/2263502
#SPJ1