If the centripetal force is of the form m^a v^b r^c, find the values of a, b and c.

Answer:

8 meters/second

Explanation:

Rate x Time = Distance

R x T = D

R x 50sec = 400meters

R x 50sec/50sec = 400meters/50sec

R = 8meters/sec

Answer:

The pressure of the solid on the surface depends on the area of contact. The area of contact between the two surfaces. The greater the force or the smaller the area the greater the pressure.

(credits to the rightful owner for these answers :)

Answer:

Mass, m = 6.18 kg

Explanation:

Given the following data;

Frequency, F = 10 Hz

Spring constant, k = 250 N/m

We know that pie, π = 22/7

To find the mass, we would use the following formula;

F = 1/2π√(k/m)

Where;

F is the frequency of oscillation.

k is the spring constant.

m is the mass of the spring.

Substituting into the formula, we have;

10 = 1/2 * 22/7 * √250/m

10 = 22/14 * √250/m

Cross-multiplying, we have;

140 = 22 * √250/m

Dividing both sides by 22, we have;

140/22 = √250/m

6.36 = √250/m

Taking the square of both sides, we have;

6.36² = (√250/m)²

40.45 = 250/m

Cross-multiplying, we have;

40.45m = 250

Mass, m = 250/40.45

Mass, m = 6.18 kg

Solution :

Placing the[tex]$3 \ kg$[/tex] mass at the [tex]$\text{origin}$[/tex] and line up the square up with the axes.

[tex]$x_{cm} = \frac{\sum_i x_i m_i}{\sum_i m_i }$[/tex]

     [tex]$=\frac{1.5 a + 1.5a +0 +0}{7.5}$[/tex]

     [tex]$=\frac{3a}{7.5}$[/tex]

    [tex]$=\frac{2a}{5}$[/tex]

[tex]$y_{cm} = \frac{\sum_i y_i m_i}{\sum_i m_i }$[/tex]

     [tex]$=\frac{1.5 a + 1.5a +0 +0}{7.5}$[/tex]

     [tex]$=\frac{3a}{7.5}$[/tex]

    [tex]$=\frac{2a}{5}$[/tex]

Therefore,  r = [tex]$\sqrt2 \left(\frac{2a}{5}\right)$[/tex]

                           [tex]$=\frac{2 \sqrt2}{5}a$[/tex]

It s given that the side of the square is a = 32.2 cm

So, r [tex]$=\frac{2 \sqrt2}{5}a$[/tex]

       [tex]$=\frac{2 \sqrt2}{5}\times 32.2$[/tex]

       = 18.21 cm

So the distance of the 3 kg mass from the center of mass, r= 18.21 cm

Answer: I think it’s Global for the 1st one

And free trade for the 2nd one

Explanation:

The correct answer is: "After World War II, political leaders from various countries discussed ways to strengthen individual economies." They began promoting economic policies to boost production and exports.

After World War II, many countries were left with weakened economies and infrastructure, and there was a need for economic recovery and growth. To achieve this, political leaders from different countries came together to discuss ways to strengthen their individual economies and also promote international economic cooperation. One of the ways they did this was by promoting economic policies that aimed to boost production and exports. This involved policies that encouraged businesses to increase their output and create more jobs, as well as policies that made it easier for countries to trade with each other.

Hence, after World War II, political leaders from various countries discussed ways to strengthen their individual economies. They began promoting economic policies to boost production and exports.

Learn more about World War II's aftermath here.

https://brainly.com/question/27327667

#SPJ5

[tex]\huge{\textit{\sf{{\color{m}{Answer}}{\color{b}{࿐}}}}}[/tex]

we know,

[tex] \boxed{potential \: energy = mgh}[/tex]

So,

[tex]\longmapsto10 \times 9.8 \times 10[/tex]

[tex]\longmapsto980 \: joules[/tex]

Answer:

Aerobic exercise is an important component of a healthy lifestyle. Find out more about aerobic equipment that can help keep you fit.

Aerobic equipment simulates the movements of aerobic exercises such as walking, jogging, rowing, skiing, hiking, biking, and climbing. These activities rhythmically and continuously move your large muscles — the key to getting your heart beating fast enough and long enough for aerobic conditioning.

Answer:

Scientific theories are cited by proponents of the Law of Attraction as evidence in its favor. It, on the other hand, has no theoretical basis. A variety of scientists have questioned the promoters' abuse of scientific principles.

Answer:

F = 160.0 N

Explanation:

Given: Soccer payer with a mass = 80 kg, force = 20 N

To find: force

Formula: [tex]F=ma[/tex]

Solution: It is summarized by the equation: Force (N) = mass (kg) × acceleration (m/s²). Thus, an object of constant mass accelerates in proportion to the force applied.

F = m × a

F = 20 kg - 10 = 2  

F = 80 × 2 = 160

F = 160.0 N

Newtons are derived units, equal to 1 kg-m/s². In other words, a single Newton is equal to the force needed to accelerate one kilogram one meter per second squared.

Ray B. isn't possible for a converging lens, because after passing through focus ot would go parallel to the principal axis,

So, Correct option is :

=》Option B.)

Answer: 588 N

Explanation: pressure = force/area, or p = F/A. Then p1=p2

And F1//A1 = F2/A2 . F2 = F1·A2/A1 = 11760 N·0.0125 m²/ 0.25 m²

Answer:

If the frequency of a wave is doubled, what happens to its wavelength? If the frequency is doubled, the wavelength is only half as long. 3. ... As the frequency slows down, the wavelength increases.

Explanation:

Answer:

planes, whereas the Oort cloud of comets has a spherical distribution.

Explanation:

A planet can be defined as a large celestial body having sufficient mass to allow for self-gravity and make it assume a nearly circular shape (hydrostatic equilibrium), revolves in an orbit around the Sun in the solar system and has a cleared neighborhood.

Basically, the planets are divided into two (2) main categories and these includes;

I. Outer planets: these planets are beyond the asteroid belt and comprises of jupiter, saturn, uranus and neptune, from left to right of the solar system.

II. Inner planets: these planets are the closest to the sun and comprises of mercury, venus, earth and mars.

These outer planets are made mostly of gases (hydrogen and helium) causing them to be less dense than the solid inner planets. These gases are generally known to be less dense in terms of physical properties.

Oort cloud is also referred to as Opik and it typically comprises of icy pieces of planetesimals (space debris) that spherically surrounds the sun at distances ranging from about 3000 to 100,000 AU.

Hence, the planets and the asteroid belt orbit the Sun in planes, whereas the Oort cloud of comets has a spherical distribution.

Answer:

[tex]w^2=5.5rads/s[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=2.0kg[/tex]

Radius [tex]r=1.8m[/tex]

Height [tex]h=7.5m[/tex]

Generally the equation for Potential energy is mathematically given by

Potential energy=Kinetic energy+Rotational energy

 [tex]mgh=\frac{1}{2}mv^2+\frac{1}{2}Iw^2[/tex]

Since there is no slipping

 [tex]v=rw[/tex]

Therefore

 [tex]mgh=\frac{1}{2}mr^2w^2+\frac{1}{2}Iw^2[/tex]

Where

      [tex]I=\frac{1}{2}mr^2[/tex]

      [tex]l=3.24m[/tex]

 [tex]2*9.81*7.5=\frac{1}{2}(2)(1.8)^2w^2+\frac{1}{2}(3.24)w^2\\\\[/tex]

 [tex]147.15=3.24w^2+1.62w^2[/tex]

 [tex]w^2=\frac{147.15}{4.86}[/tex]

 [tex]w^2=\sqrt{\frac{147.15}{4.86}}[/tex]

 [tex]w^2=5.5rads/s[/tex]

The devices don't "draw" 120v. The 120v comes to your house from the power company. They decide it should be 120v and that's what they send you. It's hypothetically technically possible for you to change that, but if you try it, you'll definitely burn the house down.

The total resistance of those two devices in parallel is 6 and 2/3 ohms. That doesn't depend on what they're plugged into. It would still be 6 and 2/3 ohms if they were connected in parallel, wrapped in tissue, sealed in a jar of chicken soup and stored in a box on a high shelf.

But since they ARE plugged into 120v, they draw 18 Amperes from the socket, and they turn all of that electrical energy into 2160 watts of heat. That's about the same as a good size toaster oven, and you have to figure out a way to get rid of all that heat before you burn the house down.

Answer:i

Explanation:

Answer:

Explanation:

No sound is heard , that means there is destructive interference at the place where sound is heard .

Path difference of the source of sound = 1.425 m - 1.230 m

= 0.195 m

Let frequency of sound be n .

wave length = velocity of sound at 0°C / n

λ = 330 / n

for destructive interference ,

path difference = ( 2m+1) λ /2 , where λ is wave length of sound.

0.195 m = ( 2m+1) λ /2

0.195 m = ( 2m+1)330 / 2n

2n = 1692.3 (2m+1)

If m = 0

n = 846 . which is nearest to given frequency of 993 Hz

So 993 Hz is the answer.

Answer:

It's called a Spirometer

Answer:

The answer is B.

Explanation:

مافيني اشرح

The proper time between two events is measured by clocks at rest in a reference frame in which the two events occur in Nashville occur at the same coordinates. So, option d.

The perspective from which you perceive and measure things is known as a reference frame. It's applied to describe how an object is moving or where it is.

Here,

Depending on the frame of reference, the time elapsed between two occurrences may vary, according to the Theory of Special Relativity.

The duration between two events occurring in the rest frame, as measured from a reference frame in motion relative to the rest frame, will always be longer than the correct time. Time dilation is a phenomenon that develops in accordance with the relativity of space and time.

A single clock that is present for both occurrences can be used to determine the right time difference between them.

The appropriate time between two events is the amount of time that elapses within a frame in which the two events take place at the same location, to put it another way.

Hence,

The proper time between two events is measured by clocks at rest in a reference frame in which the two events occur in Nashville occur at the same coordinates. So, option d.

To learn more about frame of reference, click:

https://brainly.com/question/1217098

#SPJ2

Answer:

t = 3.924 s

Explanation:

First, we will calculate the amount of work required to get the astronaut back to the capsule:

[tex]W = Fd\\[/tex]

where,

W = work required = ?

F = Force = Weight = mg = (80 kg)(9.81\ m/s²) = 784.8 N

d = distance = 5 m

Therefore,

[tex]W = (784.8\ N)(5\ m)\\W = 3924 J[/tex]

Now the time can be calculated as:

[tex]Power = \frac{W}{t}\\t = \frac{W}{Power}\\\\t = \frac{3924\ J}{1000\ W}\\\\[/tex]

t = 3.924 s

Answer:

Reaction rate are not sensitive to temperature.

Answer:

8.24 m/s²

Explanation:

Applying,

T = 2π√(L/g).................... Equation 1

Where T = period of the pendulum, L = Length of the pendulum, g = acceleration due to gravity of the planet, π = pi

From the question, we were asked to  find the value of g,

There we make g the subject of the equation

g = 4π²L/T²..................... Equation 2

Given: L= 48 cm = 0.48 m, T = (141/93) s = 1.516 s

Constant: π = 3.14

Substitute these values into equation 2

g = 4(3.14²)(0.48)/(1.516²)

g = 18.93/2.298

g = 8.24 m/s².

Hence the acceleration of the planet is 8.24 m/s²

Answer:

A,B,C,D,F,G

Explanation:

Edge 2021

The atoms, subatomic particles, particles that are 10^-9m, microtechnology systems, neutrons and particles that are 10^-3m  will displays the effects of quantum mechanics.

Quantum Mechanics is the branch of mechanics deals with the mathematical description of the motion and interaction of subatomic particles, incorporating the concepts of quantization of energy, wave–particle duality, the uncertainty principle, and the correspondence principle is Quantum Mechanics.

It is theory says at subatomic level, energy exists in discrete levels as "quanta" and particles behave as waves.

A Subatomic particles are the particle that are present inside an atom. These particles are electrons, protons, and neutrons.

Thus, atoms, subatomic particles, particles that are 10^-9m, microtechnology systems, neutrons and particles that are 10^-3m  will displays the effects of quantum mechanics.

Learn more about Quantum Mechanics;

brainly.com/question/7221719

#SPJ2

Answer:

1) ngle of incidence and reflection are equal,  light carries does not change

2) the angle of this line with respect to the surface is 90º

3) protractor

4)    n₂  sin θ₂ = n_1 sin θ₁,  light ray must have a greater angle than the incident ray ,

Explanation:

1) When light falls on a reflective surface, the angle of incidence and reflection are equal and as it travels in the same medium, the speed that the light carries does not change

2) The normal is a line perpendicular to the point of incidence of light, so the angle of this line with respect to the surface is 90º

3) Angles are measured with a protractor

4) When light passes from one medium to another, the speed of the ray changes due to the difference in the refractive index in each medium, due to this change in speed the transmitted light ray must have a greater angle than the incident ray , since the speed increases as the density of the medium decreases

           [tex]\frac{sin \theta _2}{ sin \theta_1} = \frac{v_2}{v_1}[/tex]

          [tex]\frac{c}{v_2} \ sin \theta_2 = \frac{c}{v_1} \ sin \theta_1[/tex]

          n₂  sin θ₂ = n_1 sin θ₁

Answer:

vi =2

Explanation:

Δx = 1/2 (vi + vf) t

10 = 1/2 ( vi + 8 ) 2

10 = vi + 8

10-8 = vi

vi = 2 m/s

vi= initial velocity

vf= final velocity

Δx= distance

t= time

Answer:

Linear velocity (in m/s) = 1.6 m/s

Explanation:

Given:

Length of rotational plane = 80 cm

Angular  velocity of the rod = 4rad/s

Find:

Linear velocity (in m/s)

Computation:

Radius from mid point C = Length of rotational plane / 2

Radius from mid point C = 80 / 2

Radius from mid point C = 40 cm

Radius from mid point C = 0.4 m

Linear velocity (in m/s) = Angular  velocity of the rod x Radius from mid point C

Linear velocity (in m/s) = 0.4 x 4

Linear velocity (in m/s) = 1.6 m/s

Answer:

All magnets have two poles: the North Pole and the South Pole.

Magnets attract ferromagnetic materials such as iron, nickel, and cobalt.

The magnetic force of a magnet is stronger at its poles than in the middle.

A freely suspended magnet always points in North-South direction.

Hope this helps