Answer:
Both A and B
Explanation:
A car brake system is used to bring to a halt, a moving car. The car brake system is made of several moving and hydraulic parts, which can stiffen or fade due to heat dissipation.
When brakes fade due to overheating of the brake fluid, it is called the hydraulic fade.
Tech A says that both OSHA and the EPA can inspect facilities for violations. Tech B says that a shop safety rule does not have to be reviewed once put in place. Who is correct?
Answer:
A is right, depending on what you mean the health organization OSHA is aloud to search faculty if they can or may be affecting peoples health. With a proper search it can be made clear if its safe or not and the OSHA is aloud to do it without your consent to it.
WHICH TASK BEST FITS THE ROLE OF A DESIGN ENGINEER ?
Answer: drafting blueprints
Explanation:
A well-type inclined manometer has a gas pressure difference of 17 cm-of-water at its ports (higher pressure to well). If the manometer is inclined at an angle of 12 degrees and contains water, what is the reading on the manometer (i.e. R)?
Answer:
New reading of water = 81.76 cm² (Approx)
Explanation:
Given:
Pressure difference = 17 cm
θ = 12°
Find:
New reading of water
Computation:
New reading of water = Pressure difference / Sinθ
New reading of water = 17 / sin 12
New reading of water = 81.76 cm² (Approx)
Which of the following machine parts always require
guards?
Select the 3 answer options that apply.
Fan blades
Levers
Rotating barrels
Abrasive wheel machinery
Answer:fan blades, rotating , abrasive wheel machinery
Explanation:
Beginning with model year 2008, what type of communication protocol is required for diagnostics?
Beginning with model year 2008, Controller Area Network (CAN) is required for diagnostics.
What is diagnostics?Diagnostics are defined as the process of identifying an injury, ailment, or disease based on the symptoms and signs a person is exhibiting. In order to confirm or rule out illnesses and diseases, diagnostic tests are utilized. Before creating a treatment plan, your doctor needs particular information from a diagnostic test to make an accurate diagnosis.
The robust automotive bus standard known as a Controller Area Network (CAN) enables microcontrollers and other devices to interact with each other's applications without the need for a host computer. Devices and CAN busses are frequently found in industrial and automotive systems. Bosch created the Controller Area Network (CAN) bus, which saw its debut in manufacturing in 1991.
Thus, beginning with model year 2008, Controller Area Network (CAN) is required for diagnostics.
To learn more about diagnostics, refer to the link below:
https://brainly.com/question/12814536
#SPJ2
Why is sand used as a bed for melting of metal in Cupola furnace?
Answer:
A sand bed is necessary because it provides a refractory bottom for molten metal
:]
It is desirable to model a battery by its Thevenin equivalent. To do this, two precision resistors are used. In particular, a 25 Ohm resistor gives a 20 V drop and a 15 Ohm resistor gives a 15 V drop. The Thevenin's equivalent resistance is most nearly
1. 100 ohms
2. 75 Ohms
3. 25 Ohms
4. 15 Ohms
5. 40 Ohms
Answer:
3. 25 ohms
Explanation:
Already we are aware that
Vth = IRth + VL
RL = 25 ohms
VL = 20v
I = vL/RL
I = (20/25)A
Vth = (20/25)Rth + 20
25Vth = 20Rth + 20x25
= 25Vth - 20Rth + 500 --- (a)
RL = 15 ohms VL = 15v
I = 15/15 = 1A
Vth = 1 x Rth + 15
Vth - Rth = 15 --- (b)
When we solve equations a and b simultaneously,
Vth = 40V, Rth = 25 ohms
Therefore the answer is 25ohms.
1. When and why should we use the Pattern option?
Answer:
Pattern as in texture is easy to see any flaws in your 3D design.
Explanation:
An asphalt concrete mixture includes 94% aggregate by weight. The specific gravities of aggregate and asphalt are 2.65 and 1.0, respectively. If the bulk density of the mix is 147 pcf, what is the percent voids in the total mix
Answer:
2.0%
Explanation:
Percentage of aggregate = 94%
Specific gravity = 2.65
Specific gravity of asphalt = 1.9
Density of mix = 147pcf = 147lb/ft³
Total weight of mix: (volume = 1ft³)
= (147lb/ft³)(1ft³)
= 147lb
Percentage weight of asphalt in mix:
100% - 94%
= 6%
Weight of asphalt binders
= 6% x 147lb
= 8.82lb
Weight of aggregate in mix:
= 94% x 147
= 138.18lb
Specific weight of asphalt binder:
(Gab)(Yw)
Yw = specific Weight of water
= 62.4lb
Gab = specific gravity of asphalt binder
= 1.0
(62.4lb)(1.0)
= 62.4 lb/ft³
Volume of asphalt in binder:
8.82/62.4
= 0.14ft³
Specific weight of binder in mix:
2.65 x 62.4lb/ft³
= 165.36 lb/ft³
Volume of aggregate:
= 138.18/165.36
= 0.84ft³
Volume of void in the mix:
1ft³ - 0.84ft³ - 0.14ft³
= 0.02ft³
The percentage of void in total mix:
VTM = (0.02ft³/1ft³)100
= 2.0%
Which of the following is NOT a line used on blueprints?
Answer: Photo lines
Explanation: made more sense
what is the definition of insert view and why do we use it
Answer:
its a view point for auto cad
Explanation:
from my knowlege in IED we learned about it as a way of sing how an object would look in inventor or auto CAD
The engineer must place a catch basin at the north west corner of the yard of a subdivision lot. The catchment area will be calculated with a portion of the pervious yard area and the area of the whole impervious roof area.
A. True
B. False
Answer:
A = true.
Explanation:
The statement made in the Question or problem above is TRUE/correct. The term known as " catch basin" is an important and essential part of the drainage system that is should be built in a community(whether housing community, industrial community or commercial community).
The catch basin is very important because it helps in making sure that they act as sieve to get all the dirt such as leaves from water running on the surface(runoffs).