Please help will mark brainliest!! What is the main point of paragraph 3?

Answer:

c

Explanation:

The ball of 21.7 kg which is located on a shelf 1.6 m above ground is having a mechanical energy in the form of potential energy. Hence, C best describes the energy of the ball.

Potential energy is the energy stored on it when the object is at rest. Kinetic energy of an object is generated by virtue of its motion. When a body starts moving its potential energy starts converts to kinetic energy.

The sum of kinetic and potential energy of an object is called its mechanical energy. An object has mechanical energy in the form of kinetic energy when it is at rest. When it starts to move its potential energy converts to kinetic energy.

Therefore, the ball of 21.7 kg placed in the shelf of height 1.6 m has a potential energy as long as it stays there on the shelf. Its potential energy = mgh

p = 21.7 kg × 9.8 m/s² × 1.6 m = 340.25 J

Find more on potential energy:

brainly.com/question/24284560

#SPJ6

A rain gauge is really just a cylinder that catches rain. If an inch collects in the cylinder, it means an inch of rain has fallen. It's that simple. Most standard rain gauges have a wide funnel leading into the cylinder and are calibrated so that one-tenth of an inch of rain measures one inch when it collects inside.

A forecaster studying the climate of an area would find average yearly precipitation most helpful.

Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.

Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.

Hence, option (A) is correct.

To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372

Answer:

B as all the forces cancel out

Explanation:

20-20=0

25-25=0

Answer:

b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)

Explanation:

The equation is given as;

2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)

In writing an ionic equation, only the aqueous compounds dissociates into ions. This means HCl and ZnCl2 would dissociate to form ions.

This is given as;

2H+  +  2Cl-  + Zn(s) --> H2(g) + Zn2+  + 2Cl-

The correct option is;

b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)

Answer: You are made of mostly 6 elements: Oxygen, Carbon, Hydrogen, Nitrogen, Calcium, and Phosphorus. Some of these elements combine to form compounds in your body.

Explanation:

Answer:

Explanation:

You have to use formula b to your answer

Answer: Your answer would be  D

Explanation: Sorry if i get it wrong ! (but good luck and make sure to rate)

Answer:

D

Explanation:

because when it is winter

a bear hibernates in a cave

and eats lots of food so it

dosent starve after sleeping

for such a while.

Hope this helps

plz mark brainliest

if you would be so kind!

bye!

Answer:

Which of the following MOST influences a major

shift in how the entire nucleotide sequence is

read?

B silent mutations and nonfunctioning proteins

С missense mutations and nonsense mutations

D base-pair insertions and deletions

Among the given disorders, missense mutations and nonsense mutations which  mostly  influences the shift in entire nucleotide.

A nucleotide is made of ribose sugar, phosphate groups and base pairs. Each base have a complementary base to which it pairs. If any disorder occurs in the base pairing or coding in nucleotide it is called the mutation.

A missense mutation is a sort of point mutation or single base mutation that alters the DNA by replacing one nucleotide of the codon with another nucleotide, thus changing the amino acid that is coded for in the protein.

A nonfunctional protein may emerge from the substitution of an amino acid, or the protein may not be impacted at all. Whether the mutational alterations are "conservative" or "nonconservative" will determine the functionality of the resulting protein.

It's interesting to note that the mutation is known as a nonsense mutation when the alteration in the codons nucleotide causes the development of the stop codon. The nonsense mutation causes the premature end of protein synthesis as a result of the creation of the stop codon.

To find more on mutations, refer here:

https://brainly.com/question/13923224

#SPJ2

Answer:

t = d/v , 33.3 ns

Explanation:

Since distance, d = vt where v = speed and t = time taken to cover the distance.

Since the distance, d covered by the alpha particle is the length of Rutherford's lab which is 10 m long and the speed of the alpha particle is v = 3 × 10⁸ m/s, the time, t it takes the alpha particle to move from the alpha particle source to the gold foil target is thus

t = d/v

= 10 m/3 × 10⁸ m/s

= 10/3 × 10⁻⁸ s

= 3.33 × 10⁻⁸ s

= 33.3 × 10⁻⁹ s

= 33.3 ns

Answer:

the one above is not right

Explanation:

Answer: 1 mole nitrogen produces 2 moles ammonia

How many moles you need for 155 mol ammonia?

155/2 moles

Explanation:

Answer:

yeah the answer under the explanation

Explanation:

The answer is (4) exothermic with ΔH = -1640 kJ. The 1640 kJ energy is at the right side of equation means that it releases energy. The enthalpy change means the energy of production minus the energy of reactants. If it is exothermic, the ΔH < 0.

Answer:

Depression can be caused by many things, like being neglected, abused, or even trauma. Even thoughts that might trigger sadness, or anxiety it's caused by alot of problems of your life or others around you

Explanation:

hope this helps a bit :)

Answer:

I think the oxygen.

Answer:

Oxygen (O2)

Explanation:

The fundamental importance of oxygen to life on this planet ensures its place in the care of patients with respiratory disorders. Although now well established for hypoxic patients, many questions remain regarding the benefits of oxygen for varying severity and types of chronic lung disease.

Answer:

Hydrogen and Chlorine

ie HCL

The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.

In Chemistry, the three (3) main types of chemical bonds include:

A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.

For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.

The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).

In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.

Read more: https://brainly.com/question/24212500

Answer:

3. Bacteria

Explanation:

If you don't trust me, search it up!

Answer:

a) distance is 4+7+1+8=20 blocks

b) displacement is 10 blocks

Explanation:

find displacement: x and y

x axis displacement = 4-1 = 3 blocks

y axis displacement = -7+8= 1 block

displacement = the square root of 3^2 + 1^2

= 9+1 = 10 blocks.

You can find the angle of displacement with respect to the initial position using trig identities, if you wish.

Answer:

Explanation:

0.25 M

The molarity of a solution will be 4.27M .

Molarity (M), often known as molar concentration, is the concentration of a solution expressed in moles of solute per liter of solution.

Solution can be considered as a mixture of more than one component. It may be homogeneous solution as well as heterogeneous solution.

Gram to mole conversion:

[tex]=\;2.75\;g.\;\frac{1\;mol}{58.44g} \\=\;0.0470 \;mol[/tex]

Molarity of the solution can be calculated by using the following formula:

It is calculated that, moles of solute = 0.0470 mol, volume of the solution = 1100 mL.

Now, put the value of given data in molarity formula:

[tex]Molarity=\frac{Moles\;of\;the\;solute}{Volume \;of\; the\; solution} \\=\frac{0.0470\;mol}{1100 \;mL} \\=\;4.27\;mol/mL\\=\;4.27\; M[/tex]

Therefore,  the molarity of a solution will be 4.27M.

To know more about molarity  and solution click here.

https://brainly.com/question/2817451.

#SPJ2

An

196 becase we all rice

Explanation:

Answer:

Since the force applied at both ends is acting in opposite directions, then the resultant force becomes negative.

= 35 - 25 = 10

Answer:

Lubrication in vehicles. When you put oil into your car or truck, you should be aware of its viscosity

Cooking. Viscosity plays a significant role in the preparation and serving of food.

Manufacturing. Manufacturing equipment requires appropriate lubrication to run smoothly.

oh, and medicine

Answer:

Atomic models are important because, they help us visualize the interior of atoms and molecules, and thereby predicting properties of matter.

Explanation:

We study the various atomic models in our course of study because, it is important for us to know, how did people come to the present concept of an atom. How did physics evolve from classical to quantum physics.

All these are important for us to know and thus, knowledge about various atomic models, their discoveries and drawbacks and finally improvements based on scientific evidence present at that time is important for us to understand the underlying theory very well.

Explanation:

A DAY IN THE LIFE OF METIS JOURNAL. I WROTE IT HOPE U LIKE IT XD

We, who live in the west, were Nomadic. So we always moved from place to place to hunt buffalo and other fur-bearing animals. And now again we have to shift everything we collected , like, all the essential needs we collected. It’s really hard to shift stuff, But when you move to a new place you get to see new beautiful places. They are just so satisfying to see! It’s like all my work(like the shifting work) is paid off. I love it! We always meet the Hudson’s bay company employees, and give them furs which we took from the bissons and other furry animals we hunted. And in exchange they give us their (Hudson’s Bay company) goods. Which is good! Because then we or I won't be able to enjoy that delicious pemmican!

 The one reason that makes me proud of my parents is that because of them I am like a translator for both sides in the fur trade! Anyways coming back to the present. As I said before, we were moving today to another place, But on the way some people along with my father will ride the famous York boats carrying supplies to fur posts. I begged my father to take me with him! And as usual he gave me some silly reason for me to stay. And now since I don’t have anything to do I will-..Nevermind, My mom’s calling me. Okay after helping my mom keep the fur posts into the York boats me , my mom, and the others are just relaxing and enjoying nature just to take a break. Since, I am so obsessed with my Journal notebook today I’m just going to sit here and right what comes to my mind. I’m not like the others who always seem to be talking with someone. I like my own space! 

I kind of miss my dad already, but he and his fellow members need to travel the waterways from the red river further west and north to hudson bay. These red river carts also travel the trek back and forth over land to St. Paul, Minnesota and to posts in saskatchewan.  Speaking about the red river, the only large settlement in the region is the red colony. About 12000 people lived in this colony around Fort Garry. Some were the original Selkirk settlers or their descendents. They had come from Scotland with lord Selkirk when he established the colony in 1811. Many of these original settlers were poor farmers who had been displaced  from their lands in scotland. They had endured many hardships in the early years of settlement, including foods, hunger, and sickness. I love studying about other colonies, cultures , history etc.

Answer:

One mole of anything has 6.023 x 10^23 molecules.

That would mean 3.4moles of CO2 have 6.023x 10^23 times 3.0.

So that would be2.04782×10^24 molecules in 3.0 moles of C02.

Mole measure the number of elementary entities of a given substance that are present in a given sample. 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.

Mathematically,

number of molecules of carbon dioxide = number of moles of carbon dioxide ×6.022×10²³ molecules

Number of moles of carbon dioxide=3.4moles

Substituting the values in the above equation we get

number of molecules of carbon dioxide =3.4moles×6.022×10²³ molecules

number of molecules of carbon dioxide =2.047×10²⁴

Therefore, 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.

To know more about mole, here:

https://brainly.com/question/15209553

#SPJ2