It is acceptable to create two TCP connections on the same server/port doublet from the same client with different port numbers.
A. True
B. False

Answer:

double ComputeGasVolume(double pressure, double temperature, double moles){

   double volume = moles*GAS_CONST*temperature/pressure;

    return volume;        

}

Explanation:

You may insert this function just before your main function.

Create a function called ComputeGasVolume that takes three parameters, pressure, temperature, and moles

Using the given formula, PV = nRT, calculate the volume (V = nRT/P), and return it.

Explanation:

A website is a group of globally accessible into linked pages which have a single domain name. A web application is a software or program is is accessible using any web browser.

Answer:

Explanation:

A website shows static or dynamic data that is predominantly sent from the server to the user only, whereas a web application serves dynamic data with full two way interaction.

Answer:

She removed the complex blue background and added artistic effects.

Explanation:

This is the best answer because both aspects are correct. If Megan were to "Crop" the backgrounds the shape would have changed and she would not have been able to get the whole background without cropping some of the flowers out. Therefore it is not A or C. The pictured change is most definitely artistic effects. So D is the best option.

Answer:

She removed the complex blue background and added artistic effects.

Explanation:

on edg

Answer:

True

Explanation:

Solution

ZigBee uses unlicensed frequency bands but operate at slower speed or data rates.

ZigBee: This communication is particular designed for control and sensor networks on IEEE 802.15.4 requirement for wireless personal area networks (WPANs), and it is a outcome from Zigbee alliance.

This communication level defines physical and  (MAC) which is refereed to as the Media Access Control layers to manage many devices at low-data rates.

Answer:

Deployment

Explanation:

Hardware lifecycle management is geared at making optimum use of the computer hardware so as to maximize all the possible benefits. During the deployment stage of the hardware lifecycle, the user is prompted by the computer to input their own computer hostname and username. In doing this, it is important that the user takes note of possible flaws in security. Passwords are set at this stage too. The four stages in the hardware lifecycle are procurement, deployment, maintenance, and retirement. At the deployment stage, the hardware is set up and allocated to employees so that they can discharge their duties effectively.

So, for organizations, it is important that strong passwords are used to prevent security breaches in the event that an employee leaves the organization.

Answer:

Deployment

Explanation:

Answer:

Linked lists and arrays are both linear data structures but while an array is a collection of items that can be accessed randomly, a linked list can be accessed sequentially.

A sparse matrix contains very few non-zero elements. For example;

_                        _

|  0   0   3  0  6    |

|   0   5   0  0  4   |

|   2   0   0  0  0   |

|_ 0   0   0  0  0 _|

In the implementation of a sparse matrix, the following are some of the pros and cons of using a linked list over an array;

PROS

i.  Linked lists are dynamic in nature and are readily flexible - they can expand and contract without having to allocate and/or de-allocated memory compared to an array where an initial size might need to be set and controlled almost manually. This makes it easy to store and remove elements from the sparse matrix.

ii. No memory wastage. Since the size of a linked list can grow or shrink at run time, there's no memory wastage as it adjusts depending on the number of items it wants to store. This is in contrast with arrays where you might have unallocated slots. Also, because the zeros of the sparse matrix need not be stored when using linked lists, memory is greatly conserved.

CONS

i. One of the biggest cons of linked lists is the difficulty in traversing items. With arrays, this is just of an order of 0(1) since the only requirement is the index of the item. With linked lists, traversal is sequential which means slow access time.

ii. Storage is another bottle neck when using linked lists in sparse matrix implementation. Each node item in a linked list contains other information that needs to be stored alongside the value such as the pointer to the next or previous item.

Answer:

The program written in Python is as follows

nums = []

for i in range(0,68):

-->nums.append(i)

print(nums)

Explanation:

Please note that --> is used to denote indentation

The first line creates an empty list

nums = []

This line creates an iteration from 0 to 67, using iterating variable i

for i in range(0,68):

This line saves the current value of variable i into the empty list

nums.append(i)

At this point, the list has been completely filled with 0 to 67

This line prints the list

print(nums)

Answer:

I think false

hope it helps

Answer:

False

Explanation:

The return key is the backspace or escape key.

Hope it helps.

Answer:

I have updated answer in google

Explanation:

please chek it. I hope it will nice

Answer:

Here is the C++ program for Employee class with fields id,name and sal.

#include <iostream>  // to use input output functions

#include <string>  //to manipulate and use strings

using namespace std;   // to access objects like cin cout

class Employee {  //class Employee

private:  

/* the following data members are declared as private which means they can only be accessed by the functions within Employee class */

  string name;  //name field

  int id; //id field

  double sal;   //salary field

public:    

  Employee();  // constructor that initializes an object when it is created

/* setName, setID and setSalary are the mutators which are the methods used to change data members. This means they set the values of a private fields i.e. name, id and sal */

  void setName(string n)  //mutator for name field

     { name = n; }        

  void setId(int i)  //mutator for id field

     { id = i; }        

  void setSalary(double d)  //mutator for sal field

     { sal = d; }  

/* getName, getID and getSalary are the accessors which are the methods used to read data members. This means they get or access the values of a private fields i.e. name, id and sal */

  string getName()  //accessor for name field

     { return name; }        

  int getId()  //accessor for id field

     { return id; }        

  double getSalary()  //accessor for sal field

     { return sal; }  };  

Employee::Employee() {  //default constructor where the fields are initialized

  name = "";  // name field initialized

  id = 0;  // id field initialized to 0

  sal = 0;   }   // sal field initialized to 0

void display(Employee);  

// prototype of the method display() to display the data of Employee

int main() {  //start of the main() function body

  Employee emp;  //creates an object emp of Employee class

/*set the name field to Abc Xyz which means set the value of Employee class name field to Abc Xyz  through setName() method and object emp */

  emp.setName("Abc Xyz");  

/*set the id field to 1234 which means set the value of Employee class id field to 1234  through setId() method and object emp */

  emp.setId(1234);

/*set the sal field to 1000 which means set the value of Employee class sal field to 1000  through setSalary() method and object emp */

  emp.setSalary(1000);    

  display(emp);  }   //calls display() method to display the Employee data

void display(Employee e) {  // this method displays the data in the Employee //class object passed as a parameter.

/*displays the name of the Employee . This name is read or accessed through accessor method getName() and object e of Employee class */

  cout << "Name: " << e.getName() << endl;  

/*displays the id of the Employee . This id is read or accessed by accessor method getId() and object e */

  cout << "ID: " << e.getId() << endl;

/*displays the salary of the Employee . This sal field is read or accessed by accessor method getSalary() and object e */

  cout << "Salary: " << e.getSalary() << endl;  }

Explanation:

The program is well explained in the comments mentioned with each statement of the program.

The program has a class Employee which has private data members id, name and sal, a simple default constructor Employee(), mutatator methods setName, setId and setSalary to set the fields, acccessor method getName, getId and getSalary to get the fields values.

A function display( ) is used to display the Employee data i.e. name id and salary of Employee.

main() has an object emp of Employee class in order to use data fields and access functions defined in Employee class.

The output of the program is:

Name: Abc Xyz                                                                                                      

ID: 1234                                                                                                                  

Salary: 1000

The program and its output are attached.

Answer:

#This is in Python

number1 = raw_input("Enter a number: ")

number2 = raw_input("Enter another number: ")

sum = float(number1) + float(number2)

print(sum)

Explanation:

Answer:

A. LCD power inverter

B. AC adapter

C. Battery

Answer:

False.

Explanation:

SONET is an acronym for synchronous optical networking while SDH is an acronym for synchronous digital hierarchy. They are both standard protocols used for the transmission of multiple digital bit streams (multiplex) synchronously through an optical fiber by using lasers.

Hence, both SONET and SDH are interoperable and typically the same standard protocols in telecommunication networks. Also, the SONET is a standardized protocol that is being used in the United States of America and Canada while SDH is an international standard protocols used in countries such as Japan, UK, Germany, Belgium etc.

The synchronous optical networking was developed in 1985 by Bellcore and it was standardized by the American National Standards Institute (ANSI). SDH was developed as a replacement for the plesiochronous digital hierarchy (PDH).

Generally, SONET comprises of four functional layers and these are;

1. Path layer

2. Line layer.

3. Section layer.

4. Physical or Photonic layer.

The SDH comprises of four synchronous transport modules and these are;

1. STM-1: having a basic data rate of 155.52Mbps.

2. STM-4: having a basic data rate of 622.08Mbps.

3. STM-16: having a basic data rate of 2488.32Mbps.

4. STM-64: it has a basic data rate of 9953.28Mbps.

These two standard telecommunications protocols are used to transmit large amounts of network data over a wide range through the use of an optical fiber.

Answer:

Bulk Ethernet Cable - Category 5e or CAT5e

Bulk RJ45 Crimpable Connectors for CAT-5e

Explanation:

Answer:

The classification including its given topic has always been outlined in section through below justifications.

Explanation:

Answer:

1. Divide each bonus by regular bonus apply this to all the data

2. In cell C11 write, "Average" press tab key on the keyboard and then select the range of the cells either by typing "C7:C10" or by selecting it through the mouse.

Explanation:

The average bonus multiplier can be found by dividing each bonus with the regular bonus applying this to all the data and then putting the average formula and applying it to the cells C7:C10.  

After dividing the bonus with regular bonus, in cell C11 write, "Average" press tab key on the keyboard and then select the range of the cells either by typing "C7:C10" or by selecting it through the mouse.

Answer:

Following are the description of the given points:

Explanation:

A) The Multiple greedy approaches could exist, which could be to reach for the closest emergency diamond, and yet clearly we are going to miss some very essential routes in that case. So, it can make every argument quickly, and seek to demonstrate a reference case for that.

B) An approach to the evolutionary algorithm and its users are going to just have states M x N. But each state (i, j) indicates the absolute difference between the amount of the selected diamond and the amounts of the costs incurred.

DP(i, j) = DimondVal(i, j) + max ((DP(i, j-1)-2), (DP(i-1,j-1)-3))

DP(i, j) is a description of the state.

DimondVal(i, j) is the diamond value at (i j), 0 if there is no diamond available.

This states must calculate the states of M N  and it involves continuous-time for each State to determine. Therefore the amount of time of such an algo is going to be O(MN).

Answer:

I believe it is A

Explanation:

Answer:

Binary representations of following are:

A) 35 = 100011

B) 3 = 11

C) 27 = 11011

D) 16 = 10000

Explanation:

The method to generate the binary number from a decimal is :

Keep on dividing the number by 2 and keep on tracking the remainder

And the quotient is again divided and remainder is tracked so that the number is completely divided.

And then write the binary digits from bottom to top.

Please have a look at the method in below examples:

A) 35

[tex]\begin{center}\begin{tabular}{ c c c }Number & Quotient & Remainder\\ 2 & 35 & 1 \\ 2 & 17 & 1 \\ 2 & 8 & 0 \\ 2 & 4 & 0 \\ 2 & 2 & 0 \\ 2 & 1 & 1\end{tabular}\end{center}[/tex]

Writing the remainder from bottom to top.

So, binary number is 100011

B) 3

[tex]\begin{center}\begin{tabular}{ c c c }Number & Quotient & Remainder\\ 2 & 3 & 1 \\ 2 & 1 & 1 \\ \end{tabular}\end{center}[/tex]

Writing the remainder from bottom to top.

So, binary equivalent is 11.

C) 27

[tex]\begin{center}\begin{tabular}{ c c c }Number & Quotient & Remainder\\ 2 & 27 & 1 \\ 2 & 13 & 1 \\ 2 & 6 & 0 \\ 2 & 3 & 1 \\ 2 & 1 & 1 \end{tabular}\end{center}[/tex]

Writing the remainder from bottom to top.

So, binary equivalent is 11011.

D) 16

[tex]\begin{center}\begin{tabular}{ c c c }Number & Quotient & Remainder\\ 2 & 16 & 0 \\ 2 & 8 & 0 \\ 2 & 4 & 0 \\ 2 & 2 & 0 \\ 2 & 1 & 1 \\\end{tabular}\end{center}[/tex]

Writing the remainder from bottom to top.

So, binary equivalent is 10000.

Answers are:

Binary representations of following are:

A) 35 = 100011

B) 3 = 11

C) 27 = 11011

D) 16 = 10000

Answer:

Yes

Explanation:

Yes, something approximating a hierarchical file system be simulated. This is done by assigning to each file name the name of the directory it is located in.

For example if the directory is UserStudentsLindaPublic, the name of the file can be UserStudentsLindaPublicFileY.

Also the file name can be assigned to look like the file path in the hierarchical file system. Example is /user/document/filename

Answer:

Car insurance

Explanation:

they are machines with ai

Answer:

Verifying digital signature

Explanation:

In order to guarantee authenticity of digital messages an documents, the certificate authority will perform the verification of the digital signature. A valid digital signature indicates that data is coming from the proper server and it has not been altered in its course.

(ESFs) is correct: ESFs are not exclusively federal coordinating mechanism.

Answer:

Brainly is not meant to give paragraph answers to large questions.

In a computer (desktop)

There are 8-9 main components to a PC

Motherboard

CPU

GPU (for gamers)

RAM

SSD

HDD

PSU

Cooling fans (for AMD processors stock fans are included)

Case (some fans included)

I personally build my computers (desktops) as its cheaper and I won't have to pay a build fee.

Answer:

Here is the Python program.

def DigitList(number):  

   return sum(map(int, str(number)))  

list = [18, 23, 35, 43, 51]  

ascendList = sorted(list, key = DigitList)  

print(ascendList)

Explanation:

The method DigitList() takes value of numbers of the list as parameter. So this parameter is basically the element of the list. return sum(map(int, str(number)))  statement in the DigitList() method consists of three methods i.e. str(), map() and sum(). First the str() method converts each element of the list to string. Then the map() function is used which converts every element of list to another list. That list will now contain digits as its elements. In short each number is converted to the string by str() and then the digit characters of each string number is mapped to integers. Now these digits are passed to sum() function which returns the sum. For example we have two numbers 12 and 31 in the list so each digit is 1 2 and 3 1 are added to get the sum 3 and 4. So now the list would have 3 4 as elements.

Now list = [18, 23, 35, 43, 51] is a list of 5 numbers. ascendList = sorted(list, key = DigitList)  statement has a sorted() method which takes two arguments i.e. the above list and a key which is equal to the DigitList which means that the list is sorted out using key=DigitList. DigitList simply converts each number of list to a another list with its digits as elements and then returns the sum of the digits. Now using DigitList method as key the element of the list = [18, 23, 35, 43, 51] are sorted using sorted() method. print(ascendList) statement prints the resultant list with values in the list in ascending order sorted by the sum of their digits.

So for the above list [18, 23, 35, 43, 51] the sum of each number is 9 ,5, 8, 7, 6 and then list is sorted according to the sum values in ascending order. So 5 is the smallest, then comes 6, 7, 8 and 9. So 5 is the sum of the number 23, 6 is the sum of 51, 7 is the sum of 43, 8 is the sum of 35 and 9 is the sum of 18. So now after sorting these numbers according to their sum the output list is:

[23, 51, 43, 35, 18]                                                                                                          

Answer:

(b) is used in Traceroute

(d) is used by Ping

Explanation:

ICMP is the short form of Internet Control Message Protocol. It is a protocol used by networking devices such as routers to perform network diagnostics and management. Since it is a messaging protocol, it is used for sending network error messages and operations information. A typical message could be;

i. Requested service is not available

ii. Host could not be reached

ICMP does not use ports. Rather it uses types and codes. Some of the most common types are echo request and echo reply.

Traceroute - which is a diagnostic tool - uses some messages available in ICMP (such as Time Exceeded) to trace a network route.

Ping - which is an administrative tool for identifying whether a host is reachable or not - also uses ICMP. The ping sends ICMP echo request packets to the host and then waits for an ICMP echo reply from the host.

ICMP is not required to solve NAT traversal problem neither does it have a new version in IPV6.

Answer:

milespergallon = float(input())

dollarspergallon = float(input())

milestodrive = int(input())

trip_cost = milestodrive / milespergallon * dollarspergallon

print('Cost to drive {:d} miles at {:f} mpg at $ {:.2f}/gallon is: $ {:.2f}'.format(milestodrive, milespergallon, dollarspergallon, trip_cost))

Explanation:

Get the inputs from the user for milespergallon, dollarspergallon and milestodrive

Calculate the trip_cost, divide the milestodrive by milespergallon to get the amount of gallons used. Then, multiply the result by dollarspergallon.

Print the result as requested in the question

Answer:

def driving_cost(driven_miles, miles_per_gallon, dollars_per_gallon):

  gallon_used = driven_miles / miles_per_gallon

  cost = gallon_used * dollars_per_gallon  

  return cost  

miles_per_gallon = float(input(""))

dollars_per_gallon = float(input(""))

cost1 = driving_cost(10, miles_per_gallon, dollars_per_gallon)

cost2 = driving_cost(50, miles_per_gallon, dollars_per_gallon)

cost3 = driving_cost(400, miles_per_gallon, dollars_per_gallon)

print("%.2f" % cost1)

print("%.2f" % cost2)

print("%.2f" % cost3)

Explanation:

If my computer has 4 gigabytes of ram memory then I have 4e+9 bytes of memory.  I think-

Answer: That isn't a software problem, its a hardware problem. There is a difference between 12gb of ram versus 100 gb of HDD. Ram is temporary storage, you can not turn SSD or HDD storage into RAM. If you are a gamer, STEER AWAY FROM LAPTOPS, DO NOT BUY A GAMING LAPTOP. Either buy a DESKTOP (or build) or a console. They give more performance for the price and they are easily upgradable. Not many people can open up a laptop and put in more RAM because the hardware is incredibly small.

Answer:

packet filtering

Explanation:

We can use a packet filtering firewall, for something like this, reasons because when visiting a site these types of firewalls should block all incoming traffic and analyze each packet, before sending it to the user. So if the packet is coming from a malicious origin, we can then drop that packet and be on our day ;D

Answer:

1 (true)

Explanation:

10 == 10 is valid=> 10 >= 10 is valid => 10 >=(5*2) is valid

10 == 10 is valid=> 10 <= 10 is valid => 10 <=(5*2) is valid

=>  ((10 >= 5*2) and (10 <= 5*2)) is valid => Return 1 or True