Good day can I get some help please?​

Answer:

t = 0.31s

Explanation:

In order to calculate the time that the object takes to travel from the point with its maximum speed to the point with the maximum acceleration, you first use the following formulas, for the maximum speed and the maximum acceleration:

[tex]v_{max}=\omega A\\\\a_{max}=\omega^2A[/tex]

A: amplitude

v_max = 1.38m/s

a_max = 6.83m/s^2

w: angular frequency

From the previous equations you can obtain the angular frequency w.

You divide vmax and amax, and solve for w:

[tex]\frac{v_{max}}{a_{max}}=\frac{\omega A}{\omega^2 A}=\frac{1}{\omega}\\\\\omega=\frac{a_{max}}{v_{max}}=\frac{6.83m/s^2}{1.38m/s^2}=4.94\frac{rad}{s}[/tex]

Next, you take into account that the maximum speed is obtained when the object passes trough the equilibrium point, and the maximum acceleration for the maximum elongation, that is, the amplitude. In such a trajectory the time is T/4 being T the period.

You calculate the period  by using the information about the angular frequency:

[tex]T=\frac{2\pi}{\omega}=\frac{2\pi}{4.94rad/s}=1.26s[/tex]

Then the required time is:

[tex]t=\frac{T}{4}=\frac{1.26s}{4}=0.31s[/tex]

Answer:

6 N

Explanation:

From the laws of friction

F = ¶R = 0.3 × 20 = 6 N

The force of friction opposing the block's motion is 6 N.

The given parameters;

The force of friction which opposes the motion of the block is obtained by applying Newton's second law of motion.

F = ma

Fₓ = μF

Substitute the given parameters to calculate the frictional force on the object.

Fₓ = 0.3 x 20

Fₓ = 6 N

Thus, the force of friction opposing the block's motion is 6 N.

Learn more here: https://brainly.com/question/18247518

Answer:

F' = F/4

Thus, the magnitude of electrostatic force will become one-fourth.

Explanation:

The magnitude of force applied by each charge on one another can be given by Coulomb's Law:

F = kq₁q₂/r²   -------------- equation 1

where,

F = Force applied by charges

k = Coulomb's Constant

q₁ = magnitude of first charge

q₂ = magnitude of 2nd charge

r = distance between the charges

Now, in the final state the charges on both spheres are halved. Therefore,

q₁' = q₁/2

q₂' = q₂/2

Hence, the new force will be:

F' = kq₁'q₂'/r²

F' = k(q₁/2)(q₂/2)/r²

F' = (kq₁q₂/r²)(1/4)

using equation 1:

F' = F/4

Thus, the magnitude of electrostatic force will become one-fourth.

The magnitude of the electrostatic force will be F' = F/4

Here we used Coulomb's Law:

F = kq₁q₂/r²   -------------- equation 1

Here

F = Force applied by charges

k = Coulomb's Constant

q₁ = magnitude of first charge

q₂ = magnitude of 2nd charge

r = distance between the charges

Now

q₁' = q₁/2

q₂' = q₂/2

So, the new force should be

F' = kq₁'q₂'/r²

F' = k(q₁/2)(q₂/2)/r²

F' = (kq₁q₂/r²)(1/4)

So,

F' = F/4

Learn more about force here: https://brainly.com/question/14282312

Answer:

B) The wavelength of both transverse and longitudinal waves is measured parallel to the direction of the travel of the wave

Answer:

B) The wavelength of both transverse and longitudinal waves is measured parallel to the direction of the travel of the wave.

Explanation: hope this helps ;)

Answer:

21,920 Pascals

Explanation:

P = ρgh

P = (1096 kg/m³) (10 m/s²) (2 m)

P = 21,920 Pa

Answer:

W = 14700 J

Explanation:

This is an exercise on Newton's second law.

To solve it we must fix a coordinate system, the most common is an axis parallel to the ramp and the other perpendicular axis, we write Newton's second law

Y Axis . Perpendicular to the ramp

       N - Wy = 0

X axis. Parallel to the ramp, we assume it is positive when the ramp is going up

        F - Wx = m a

in this case F = 1470 N and it is parallel to the plane.

Work is defined by

      W = F .d

boldface indicates vectors

      W = F d cos θ

     let's calculate

      W = 1470 10 cos 0

       W = 14700 J

Answer:

v = 6t² − 2t^³/₂

s = 2t³ − ⅘t^⁵/₂ + 15

Explanation:

a = 12t − 3t^½

Integrate to find velocity.

v = ∫ a dt

v = ∫ (12t − 3t^½) dt

v = 6t² − 2t^³/₂ + C

Use initial condition to find C.

0 = 6(0)² − 2(0)^³/₂ + C

C = 0

v = 6t² − 2t^³/₂

Integrate to find position.

s = ∫ v dt

s = ∫ (6t² − 2t^³/₂) dt

s = 2t³ − ⅘t^⁵/₂ + C

Use initial condition to find C.

15 = 2(0)³ − ⅘(0)^⁵/₂ + C

15 = C

s = 2t³ − ⅘t^⁵/₂ + 15

Answer:

A, C

Explanation:

Since the frequency is inversely proportional to the length of a string, then I want to increase the frequency of the lowest

A. Replacing the string with a thicker string.

Thicker strings have more density. The more density the string has, the lower the sound.

Mathematically, we can see the proportionality (direct and inverse) by looking at those formulas for Frequency and Speed, when combined:

For:

[tex]f=\frac{v}{\lambda}[/tex]

[tex]f=\frac{v}{\lambda}*\sqrt{\frac{T}{D} }[/tex]

See above, how density (D) and [tex](\lambda)[/tex] wave length are inversely proportional.

C. Doubling the length of the string.

Because the length of the string is inversely proportional to the frequency.

The longer the string, the lower the frequency.

So, if we double string, we'll hear lower sounds in any string instrument

--

In short,  for A, and C  We can justify both since length and density are inversely proportional to the Frequency, we need longer or thicker string.

Answer:

16200 km/s

270 km/min

4.5 km/h

Explanation:

Acceleration Formula: Average Acceleration = Δv/Δt (change in velocity over change in time)

Simply plug in our known variables and solve:

a = (45.0 - 0)/10

a = 45.0/10

a = 4.5 km/h

Answer:

[tex]\boxed{\mathrm{4.5 \: kmph/s \: or \: 1.25 \: m/s^2 }}[/tex]

Explanation:

[tex]\displaystyle \mathrm{acceleration = \frac{change \: in \: velocity}{time \: taken}}[/tex]

[tex]\displaystyle \mathrm{a = \frac{v - u}{t}}[/tex]

[tex]\displaystyle \mathrm{v=final \: velocity}\\\displaystyle \mathrm{u=initial \: velocity}[/tex]

[tex]\displaystyle \mathrm{a = \frac{45- 0}{10}}[/tex]

[tex]\displaystyle \mathrm{a = \frac{45}{10}}[/tex]

[tex]\displaystyle \mathrm{a = 4.5}[/tex]

[tex]\mathrm{4.5 \: kmph/s = 1.25 \: m/s^2 }[/tex]

Answer:

An asteroid that has an orbital period of 3 years will have an orbital with a semi-major axis of about  2 years.

Explanation:

Given;

orbital period of 3 years, P = 3 years

To calculate the years of an orbital with a semi-major axis, we apply Kepler's third law.

Kepler's third law;

P² = a³

where;

P is the orbital period

a is the orbital semi-major axis

(3)² = a³

9 = a³

a = [tex]a = \sqrt[3]{9} \\\\a = 2.08 \ years[/tex]

Therefore, An asteroid that has an orbital period of 3 years will have an orbital with a semi-major axis of about  2 years.

Answer:

The new voltage between the plates of the capacitor is 18 V

Explanation:

The charge on parallel plate capacitor is calculated as;

q = CV

Where;

V is the battery voltage

C is the capacitance of the capacitor, calculated as;

[tex]C = \frac{\epsilon _0A}{d} \\\\q =CV = (\frac{\epsilon _0A}{d})V = \frac{\epsilon _0A V}{d}[/tex]

[tex]q = \frac{\epsilon _0A V}{d}[/tex]

where;

ε₀ is permittivity of free space

A is the area of the capacitor

d is the space between the parallel plate capacitors

If only the space between the capacitors is doubled and every other parameter is kept constant, the new voltage will be calculated as;

[tex]q = \frac{\epsilon _0A V}{d} \\\\\frac{\epsilon _0A V}{d} = \frac{\epsilon _0A V}{d} \\\\\frac{V_1}{d_1} = \frac{V_2}{d_2} \\\\V_2 = \frac{V_1d_2}{d_1} \\\\(d_2 = 2d_1)\\\\V_2 = \frac{V_1*2d_1}{d_1} \\\\(V_1 = 9V)\\\\V_2 = \frac{9*2d_1}{d_1} \\\\V_2 = 9*2\\\\V_2 = 18 \ V[/tex]

Therefore, the new voltage between the plates of the capacitor is 18 V

Answer:

B = 0.025T

Explanation:

In order to calculate the strength of the magnetic field at the center of the solenoid, you use the following formula:

[tex]B=\frac{\mu N i}{L}[/tex]         (1)

μ: magnetic permeability of vacuum = 4π*10^-7 T/A

N: turns of the solenoid = 500

i: current = 4.0A

L: length of the solenoid = 0.10m

You replace the values of the parameters in the equation (1):

[tex]B=\frac{(4\pi*10^{-7}T/A)(500)(4.0A)}{0.10m}=0.025T[/tex]

The strength of the magnetic field at the center of the solenoid = 0.025T

Answer:

Magnetic field strength at the center is 2.51x10^-2T

Explanation:

Pls see attached file for step by step calculation

Answer:

The speed is  [tex]v =10.27 *10^{7} \ m/s[/tex]

Explanation:

From the question we are told that

      The  voltage  is  [tex]V = 30 kV = 30*10^{3} V[/tex]

      The  initial velocity of the electron is  [tex]u = 0 \ m/s[/tex]

Generally according to the law of energy conservation

    Electric potential Energy  =  Kinetic energy of the electron

So  

      [tex]PE = KE[/tex]

Where  

      [tex]KE = \frac{1}{2} * m* v^2[/tex]

Here  m is the mass of the electron with a value of  [tex]m = 9.11 *10^{-31} \ kg[/tex]

     and  

         [tex]PE = e * V[/tex]

      Here  e is the charge on the electron with a value  [tex]e = 1.60 *10^{-19} \ C[/tex]

=>    [tex]e * V = \frac{1}{2} * m * v^2[/tex]

=>      [tex]v = \sqrt{ \frac{2 * e * V}{m} }[/tex]

substituting values  

           [tex]v = \sqrt{ \frac{2 * (1.60*10^{-19}) * 30*10^{3}}{9.11 *10^{-31}} }[/tex]

          [tex]v =10.27 *10^{7} \ m/s[/tex]

Answer:

C. The atom loses 1 electron to have a total of 36.

Explanation:

Cations have a positive charge. Cations lose electrons.

The number of electrons in a Rubidium atom is 37. If the atom loses 1 electron, then it has 36 left.

Answer:

Explanation:

The current through the  resistor is 0.83 A

.

Part b

The current through  resistor is 0.53 A

.

Part c

The current through  resistor is 0.30 A

Answer:

a.   q2 = 16.4μC, positive charge

b.   F = 0.900N

c.   downward

Explanation:

a. In order to calculate the charge of the unknown charge you use the following formula, for the electric force between two charges:

[tex]F_e=k\frac{q_1q_2}{r^2}[/tex]            (1)

k: Coulomb's constant = 8.98*10^9Nm^2/C^2

r: distance between the charges = 0.300m

q1: charge 1 = -0.550 μC = 0.550*10^-6C

q2: charge 2 = ?

Fe: electric force = 0.900N

The force exerted in the second charge points upward, then, the sign of the second charge is positive because this charge is getting closer to the first one.

You solve the equation (1) for the second charge ans replace the values of the other parameters:

[tex]q_2=\frac{r^2F_e}{kq_1}=\frac{(0.300m)^2(0.900N)}{(8.98*10^9Nm^2/C^2)(0.550*10^{-6}C)}\\\\q_2=1.64*10^{-5}C\\\\q_2=16.4*10^{-6}C=16.4*10\mu C[/tex]

The values of the second charge is 1.64 μC

b. By the third Newton Law, you have that the force exerted in the second charge is equal to the force exerted by the first charge on the second one.

The force exerted on the first charge is 0.900N

c. The charges are attracting between them, then, the force exerted on the first charge is pointing downward.

Answer:

The average current will be "17.69 nA".

Explanation:

The given values are:

Charge,

q = 9.2 pC

Time,

t = 0.52ms

The equivalent circuit of the cell surface is provided by:

⇒  [tex]i_{avg}=\frac{charge}{t}[/tex]

Or,

⇒  [tex]i_{avg}=\frac{q}{t}[/tex]

On substituting the given values, we get

⇒         [tex]=\frac{9.2\times 10^{-12}}{0.52\times 10^{-3}}[/tex]

⇒         [tex]=17.69^{-9}[/tex]

⇒         [tex]=17.69 \ nA[/tex]

Answer:

a) The average friction force exerted on the toboggan is 653.125 newtons, b) The rough region reduced the kinetic energy of the toboggan in 92.889 %, c) The speed of the toboggan is reduced in 73.333 %.

Explanation:

a) Given the existence of non-conservative forces (friction between toboggan and ground), the motion must be modelled by means of the Principle of Energy Conservation and the Work-Energy Theorem, since toboggan decrease its speed (associated with  due to the action of friction. Changes in gravitational potential energy can be neglected due to the inclination of the ground. Then:

[tex]K_{1} = K_{2} + W_{f}[/tex]

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] are the initial and final translational kinetic energies of the tobbogan, measured in joules.

[tex]W_{f}[/tex] - Dissipated work due to friction, measured in joules.

By applying definitions of translation kinetic energy and work, the expression described above is now expanded and simplified:

[tex]f\cdot \Delta s = \frac{1}{2}\cdot m \cdot (v_{1}^{2}-v_{2}^{2})[/tex]

Where:

[tex]f[/tex] - Friction force, measured in newtons.

[tex]\Delta s[/tex] - Distance travelled by the toboggan in the rough region, measured in meters.

[tex]m[/tex] - Mass of the toboggan, measured in kilograms.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final speed of the toboggan, measured in meters per second.

The friction force is cleared:

[tex]f = \frac{m\cdot (v_{1}^{2}-v_{2}^{2})}{2\cdot \Delta s}[/tex]

If [tex]m = 375\,kg[/tex], [tex]v_{1} = 4.50\,\frac{m}{s}[/tex], [tex]v_{2} = 1.20\,\frac{m}{s}[/tex] and [tex]\Delta s = 5.40 \,m[/tex], then:

[tex]f = \frac{(375\,kg)\cdot \left[\left(4.50\,\frac{m}{s} \right)^{2}-\left(1.20\,\frac{m}{s}\right)^{2}\right]}{2\cdot (5.40\,m)}[/tex]

[tex]f = 653.125\,N[/tex]

The average friction force exerted on the toboggan is 653.125 newtons.

b) The percentage lost by the kinetic energy of the tobbogan due to friction is given by the following expression, which is expanded and simplified afterwards:

[tex]\% K_{loss} = \frac{K_{1}-K_{2}}{K_{1}}\times 100\,\%[/tex]

[tex]\% K_{loss} = \left(1-\frac{K_{2}}{K_{1}} \right)\times 100\,\%[/tex]

[tex]\% K_{loss} = \left(1-\frac{\frac{1}{2}\cdot m \cdot v_{2}^{2}}{\frac{1}{2}\cdot m \cdot v_{1}^{2}} \right)\times 100\,\%[/tex]

[tex]\% K_{loss} = \left(1-\frac{v_{2}^{2}}{v_{1}^{2}} \right)\times 100\,\%[/tex]

[tex]\%K_{loss} = \left[1-\left(\frac{v_{2}}{v_{1}}\right)^{2} \right]\times 100\,\%[/tex]

If [tex]v_{1} = 4.50\,\frac{m}{s}[/tex] and [tex]v_{2} = 1.20\,\frac{m}{s}[/tex], then:

[tex]\%K_{loss} = \left[1-\left(\frac{1.20\,\frac{m}{s} }{4.50\,\frac{m}{s} }\right)^{2} \right]\times 100\,\%[/tex]

[tex]\%K_{loss} = 92.889\,\%[/tex]

The rough region reduced the kinetic energy of the toboggan in 92.889 %.

c) The percentage lost by the speed of the tobbogan due to friction is given by the following expression:

[tex]\% v_{loss} = \frac{v_{1}-v_{2}}{v_{1}}\times 100\,\%[/tex]

[tex]\% v_{loss} = \left(1-\frac{v_{2}}{v_{1}} \right)\times 100\,\%[/tex]

If [tex]v_{1} = 4.50\,\frac{m}{s}[/tex] and [tex]v_{2} = 1.20\,\frac{m}{s}[/tex], then:

[tex]\% v_{loss} = \left(1-\frac{1.20\,\frac{m}{s} }{4.50\,\frac{m}{s} } \right)\times 100\,\%[/tex]

[tex]\%v_{loss} = 73.333\,\%[/tex]

The speed of the toboggan is reduced in 73.333 %.

The average frictional force exerted on the toboggan by the rough surface is 661.5 N.

The percentage of the toboggan kinetic energy reduction is 7.11%.

The percentage of the toboggan speed reduction is 26.67%.

The given parameters;

The normal force on the toboggan is calculated as follows;

Fₙ = mg

Fₙ = 375 x 9.8 = 3675 N

The acceleration of the toboggan is calculated as follows;

[tex]v^2 = u^2 + 2as\\\\2as = v^2 - u^2\\\\a = \frac{v^2 - u^2 }{2s} \\\\a = \frac{(1.2)^2 - (4.5)^2 }{2(5.4)}\\\\a = -1.74 \ m/s^2[/tex]

The coefficient of friction is calculated as follows;

[tex]\mu_k = \frac{a}{g} \\\\\mu_k = \frac{1.74}{9.8} \\\\\mu_k = 0.18[/tex]

The average frictional force exerted on the toboggan by the rough surface;

[tex]F_k = \mu_k F_n\\\\F_k = 0.18 \times 3675\\\\F_k = 661.5 \ N[/tex]

The initial kinetic energy of the toboggan is calculated as follows;

[tex]K.E_i = \frac{1}{2} mu^2\\\\K.E_i = \frac{1}{2} \times 375\times 4.5^2\\\\K.E_i = 3,796.88 \ J[/tex]

The final kinetic energy of the toboggan is calculated as follows;

[tex]K.E_f = \frac{1}{2} mv^2\\\\K.E_f = \frac{1}{2} \times 375\times 1.2^2\\\\K.E_f = 270 \ J[/tex]

The percentage of the toboggan kinetic energy reduction is calculated as follows;

[tex]\frac{K.E_f}{K.E_i} \times 100\% = \frac{270}{3796.88} \times 100\% = 7.11 \%[/tex]

The percentage of the toboggan speed reduction is calculated as follows;

[tex]\frac{1.2}{4.5} \times 100\% = 26.67 \%[/tex]

Learn more here: https://brainly.com/question/14121363

Answer:

The answer is "[tex]\bold{7.30 \times 10^{-6}}[/tex]"

Explanation:

length of the copper wire:

L= 62.9 cm

r is the radius of the loop then:

[tex]r=\frac{L}{2 \pi}\\[/tex]

  [tex]=\frac{62.9}{2\times 3.14}\\\\=\frac{62.9}{6.28}\\\\=10.01\\[/tex]

area of the loop Is:

[tex]A_L= \pi r^2[/tex]

     [tex]=100.2001\times 3.14\\\\=314.628[/tex]

change in magnetic field is:

[tex]=\frac{dB}{dt} \\\\ = 0.01\ \frac{T}{s}[/tex]

then the induced emf is:  [tex]e = A_L \times \frac{dB}{dt}[/tex]

                                              [tex]=314.628 \times 0.01\\\\=3.14\times 10^{-5}V[/tex]

resistivity of the copper wire is: [tex]\rho =[/tex]  1.69 × 10-8Ω·m

diameter d = 1.15mm

radius (r) = 0.5mm

               [tex]= 0.5 \times 10^{-3} \ m[/tex]

hence the resistance of the wire is:

[tex]R=\frac{\rho L}{\pi r^2}\\[/tex]

   [tex]=\frac{1.69 \times 10^{-8}(62.9)}{3.14 \times (0.5 \times 10^{-3})^2}\\\\=\frac{1.69 \times 10^{-8}(62.9)}{3.14 \times 0.5 \times 0.5 \times 10^{-6}}\\\\=\frac{1.69 \times 10^{-8}(62.9)}{3.14 \times 0.25 \times 10^{-6}}\\\\=135.41 \times 10^{-2}\\=1.35\times 10^{-4}\\[/tex]

Power:

[tex]P=\frac{e^2}{R}[/tex]

[tex]=\frac{3.14\times 10^{-5}\times 3.14\times 10^{-5}}{1.35 \times 10^{-4}}\\\\=7.30 \times 10^{-6}[/tex]

The final answer is: [tex]\boxed{7.30 \times 10^{-6} \ W}[/tex]

Answer:

a) 1.94 m/s

b) 120 m

Explanation:

Convert km/h to m/s:

6 km/h = 1.67 m/s

a) The final speed is found with Pythagorean theorem:

v = √((1.67 m/s)² + (1 m/s)²)

v = 1.94 m/s

b) The time it takes the boat to cross the river is:

t = (200 m) / (1.67 m/s)

t = 120 s

The displacement in the direction of the current is:

x = (1 m/s) (120 s)

x = 120 m

Answer:

Length of a tube = 1.574 m

Explanation:

Given:

Fundamental frequency (f1) = 108 Hz

First overtone (f2) = 216 Hz

Speed of sound (v) = 340 m/s

Find:

Length of a tube

Computation:

We know that,

f = v / λ

f = nv / 2L  [n = number 1,2,3]

So,

f1 = 1(340) / 2L

f1 = 170 / L

L = 170 / 108 = 1.574 m

f2 = 2(340) / 2L

L = 340 / 216

L = 1.574 m

Answer:

(a) The power wasted for 0.289 cm wire diameter is 15.93 W

(b) The power wasted for 0.417 cm wire diameter is 7.61 W

Explanation:

Given;

diameter of the wire, d = 0.289 cm = 0.00289 m

voltage of the wire, V = 120 V

Power drawn, P = 1850 W

The resistivity of the wire, ρ = 1.68 x 10⁻⁸ Ω⋅m

Area of the wire;

A = πd²/4

A = (π x 0.00289²) / 4

A = 6.561 x 10⁻⁶ m²

(a) At 26 m of this wire, the resistance of the is

R = ρL / A

R = (1.68 x 10⁻⁸  x 26) / 6.561 x 10⁻⁶

R = 0.067 Ω

Current in the wire is calculated as;

P = IV

I = P / V

I = 1850 / 120

I = 15.417 A

Power wasted = I²R

Power wasted = (15.417²)(0.067)

Power wasted = 15.93 W

(b) when a diameter of 0.417 cm is used instead;

d = 0.417 cm = 0.00417 m

A = πd²/4

A = (π x 0.00417²) / 4

A = 1.366 x 10⁻⁵ m²

Resistance of the wire at 26 m length of wire and  1.366 x 10⁻⁵ m² area;

R = ρL / A

R = (1.68 x 10⁻⁸  x 26) / 1.366 x 10⁻⁵

R = 0.032 Ω

Power wasted = I²R

Power wasted = (15.417²)(0.032)

Power wasted = 7.61 W

Answer:

Explanation:

Kinetic energy at the height = 1/2 m v²

= 1/2 x 750 x 20²

= 150000 J

Its potential energy = mgh

= 750 x 9.8 x 5

=36750 J

Total energy = 186750 J

Its total kinetic energy will be equal to 186750 J , according to conservation of mechanical energy

If v be its velocity at the bottom

1/2 m v² = 186750

v = √498

= 22.31 m /s

Answer:

From the image, the force as shown in option A will exert the biggest torque on the cylinder about its central axes.

Explanation:

The image is shown below.

Torque is the product of a force about the center of rotation of a body, and the radius through which the force acts. For a given case such as this, in which the cylinders are identical, and the forces are of equal magnitude, the torque at the maximum radius away from the center will exert the maximum torque. Also, the direction of the force also matters. To generate the maximum torque, the force must be directed tangentially away from the circle formed by the radius through which the force acts away from the center. Option A satisfies both condition and hence will exert the most torque on the cylinder.

Answer:

The number of bright spot is  m =4

Explanation:

From the question we are told that

    The number of lines is  [tex]s = 500 \ lines / mm = 500 \ lines / 10^{-3} m[/tex]

     The wavelength of the laser is  [tex]\lambda = 480 nm = 480 *10^{-9} \ m[/tex]

Now the the slit is mathematically evaluated as

        [tex]d = \frac{1}{s} = \frac{1}{500} * 10^{-3} \ m[/tex]

Generally the diffraction grating is mathematically represented as

        [tex]dsin\theta = m \lambda[/tex]

Here m is the order of fringes (bright fringes) and at maximum m  [tex]\theta = 90^o[/tex]

    So

          [tex]\frac{1}{500} * sin (90) = m * (480 *10^{-3})[/tex]

=>        [tex]m = 4[/tex]

This  implies that the number of bright spot is  m =4

Answer:

v = 16 m/s

Explanation:

It is given that,

Acceleration of a particle along x -axis is [tex]2.5\ m/s^2[/tex]

At t = 0s, its velocity is 6 m/s

We need to find the velocity at t = 4 s

It means that the initial velocity of the particle is 6 m/s

Let v is the velocity at t = 4 s

So,

v = u + at

[tex]v=6+2.5\times 4\\\\v=16\ m/s[/tex]

So, the velocity at t = 4 s is 16 m/s.

Answer:

v = 16 m/s

Explanation:

It is given that,

Acceleration of a particle along x -axis is  

At t = 0s, its velocity is 6 m/s

We need to find the velocity at t = 4 s

It means that the initial velocity of the particle is 6 m/s

Let v is the velocity at t = 4 s

So,

v = u + at

So, the velocity at t = 4 s is 16 m/s.

Answer:

B: I2>I1

Explanation:

See attached file

Answer:

2.20°

Explanation:

For the central bright spot, we will use the constructive pattern for a double slit interference,

[tex]m\times w = d \times Sin\beta[/tex]

where w indicates the wavelength

and [tex]\beta[/tex] indicates the angle between the bright spot and center line.

now we will use the given values,

1 × 500 × 10^-9 = 1.3 × 10^-5 × Sin [tex]\beta[/tex]

Solving for [tex]\beta[/tex],

[tex]\beta[/tex] = 2.204° ~ 2.20°

Therefore the correct answer is 2.20°

Answer:

Do u have a picture of the graph?

Explanation:

I can solve it with refraction