Answer:
Illumination = 200 fc
luminance = 2FL
Explanation:
given data
desired brightness = 100 fL
painted medium green reflectance = 50 percent
illumination = 4c
solution
we get here Illumination by using the formula that is
Illumination = luminance ÷ reflectance ......................1
Illumination = 100 fL ÷ 0.50
Illumination = 200 fc
With light colored cream paint with a reflectance of 75% the required illumination is 133 fc.
and
luminance will be
luminance = Illumination × reflectance = 4fc × 0.5 = 2FL
You drive on Interstate 10 from San Antonio to Houston, half the time at 75 km/h and the other half at 106 km/h. On the way back you travel half the distance at 75 km/h and the other half at 106 km/h. What is your average speed (a) from San Antonio to Houston, (b) from Houston back to San Antonio, and (c) for the entire trip
Answer:
Explanation:
a ) from San Antonio to Houston let distance be d km .
Average speed = total distance / total time
time = distance / speed
Total time = (d / 2 x 75 ) +( d / 2 x 106 )
= .0067 d + .0047 d
= .0114 d
Average speed = d / .0114 d = 87.72 km /h
b ) from Houston back to San Antonio
Total time = (d / 2 x 106 ) +( d / 2 x 75 )
= .0047 d + .0067 d
= .0114 d
Average speed = d / .0114 d = 87.72 km /h
c )
For entire trip :
total distance = 2d
total time = 2 x .0114 d
Average speed = 2 d / 2 x .0114 d
= 87.72 km /h .
The surface area of a postage
stamp is 0.00600 m^2, and the air
exerts 1.00 atm of pressure on it.
How much force does it exert on
the stamp?
(Hint: The standard unit for
pressure is Pa.)
(Unit = N)
Answer:
Force = 607.95 Newton
Explanation:
Given the following data;
Area = 0.00600 m^2
Pressure = 1 atm to Pascal = 101325 Pa
To find the force;
Pressure = Force/area
Force = pressure * area
Substituting into the equation, we have;
Force = 101325 * 0.00600
Force = 607.95 Newton.
Therefore, the amount of force exerted by the air on the stamp is 607.95 Newton.
I need helpp! This is urgent tomorrow is the duedate
Answer:
The Force that resists the motion of one object moving relative to another is Friction. Kinetic Friction Resists the motion of Moving objects, while Static friction keeps the objects from moving.
Marquette King, formerly of the Denver Broncos, is practicingkicking off using a kicking holder with the ball on the ground.For one of the kicks the ball reaches a height of 90.6 m andlands on the ground 53 yds (48.5 m) away. Find the magnitudeof the initial velocity given by his kick to the ball. Treat airresistance as negligible. Hint: Even though the horizontal andvertical motions are independent, there is a quantity that iscommon to both of them.
Answer:
Explanation:
Maximum height reached = 90.6 m . Range = 48.5 m
. Let u be the initial velocity at angle α .
Horizontal range is covered by horizontal component of u .
Vertical height is achieved by vertical component
v² = u² sin² α - 2gh , t is time taken to attain maximum height .
0 = u² sin² α - 2 x 90.6 x 9.8
u² sin² α = 2 x 887.88 -------( 1 )
Range R = u² sin2α / g
48.5 = 2 u² sinα . cos α / 9.8
u² sinα . cos α = 237.65 ----------------------------- ( 2 )
( 1 ) / ( 2 )
Tan α = 2 x 887.88 / 237.65 = 7.47
α = 82⁰
u² sin² α = 2 x 887.88
u² sin² 82 = 2 x 887.88
u² = 1812
u = 42.56 m /s
____made up of glucose and fructose and found in plants.
1.Xylose
2.Maltose
3.Lactose
4.Sucrose
Answer:
1.Lactose
I Hope its help for you
Have a good day
Use g = 9.80 m/s2 (down]
1. What velocity does a freely falling object reach after 4.0 s if it starts from rest?
The velocity of the freely falling object reached after 4.0 s is equal to 39.2 m/s.
What is the equation of motion?A relation can be established between the velocity of the body and acceleration of the body when the body is moving along a straight line with uniform acceleration. The distance traveled by the body in a specific time has expressed a set of equations called equations of motion.
The first equation of motion can be expressed as follows:
v = u + at
Where u is the initial velocity, v is the final velocity and a is the acceleration and t is the time of the object.
Given, the acceleration of the falling object, g = 9.8 m/s²
The initial velocity of the object, u = 0, and the time = 4 sec
The velocity of the object after time, t = 4 sec.
v = (0) + (9.80)× (4)
v = 39.2 m/s
Therefore, the velocity of the falling object will be 39.2 m/s after 4 seconds.
Learn more about the equation of motion, here:
https://brainly.com/question/16782759
#SPJ2
A tennis player hit a .057-kg ball with a force of 40 N. The duration of the force was .05 s.
Through what potential difference should electrons be accelerated so that their speed is 1.0 % of the speed of light when they hit the target
Answer:
Explanation:
Considering non - relativistic approach : ----
Speed of electron = 1 % of speed of light
= .01 x 3 x 10⁸ m /s
= 3 x 10⁶ m /s
Kinetic energy of electron = 1/2 m v²
= .5 x 9.1 x 10⁻³¹ x ( 3 x 10⁶ )²
= 40.95 x 10⁻¹⁹ J
Kinetic energy in electron comes from lose of electrical energy equal to
Ve where V is potential difference under which electron is accelerated and e is electronic charge .
V x e = kinetic energy of electron
V x 1.6 x 10⁻¹⁹ = 40.95 x 10⁻¹⁹
V = 25.6 Volt .
calculate the peak voltage of a mains supply of 240Vrms.
In a game of ice hockey, you use a hockey stick to hit a puck of mass 0.16 kg that slides on essentially frictionless ice. During the hit you exert a constant horizontal force on the puck that gives it an acceleration of 75 m/s2 for a fraction of a second. During the hit, what is the magnitude of the horizontal force that you exert on the puck
Answer:
12N
Explanation:
given- mass, acelation
Fnet=ma= .16kg*75m/s2
Fnet=12 N only force no friction given.
Points A, B, and C lie along a line from left to right, respectively. Point B is at a lower electric potential than point A. Point C is at a lower electric potential than point B. What would best describes the subsequent motion, if any, of a positively-charged particle released from rest at point B?
Answer:
Please see below as the answer is self-explanatory.
Explanation:
If the potential at B is lower than A, and the potential at C is lower than B, this means that there is an electric field, directed from A to C.If a positively-charged particle is released at rest at point B, it will be accelerated by the electric field (which is a force per unit charge, so it produces an acceleration) in the same direction than the field (because it is a positive charge) towards point C.A mass of 10. kg is placed on the end of a 0.50-meter pendulum. What is the period of the pendulum?
Answer:
T = 1.41 seconds
Explanation:
Given that,
The mass placed in the pendulum, m = 10 kg
The length of the pendulum, l = 0.5 m
We need to find the period of the pendulum. The relation for the period of the pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}} \\\\T=2\pi \sqrt{\dfrac{0.5}{9.8}} \\\\T=1.41\ s[/tex]
So, the time period of the pendulum is 1.41 seconds.
For anyone that needs the correct answer without POS trolls:
The answer is 1.4 s
Thank me later :)
Can someone help me answer please
Answer:
4=Conduction by convection by radiation.
Explanation:
Hope it will help you! It may be short but I don't know how to write it in blank aafai milayera lekha Hai blanks ma
A fox locates its prey under the snow by slight sounds rodents make. The fox then leaps straight into the air, and then burrows its nose into the snow to catch its meal. If a fox jumps up to a height of 79 cm, calculate (a) the speed at which the fox leaves the snow, and (b) how long the fox is in the air. Ignore air resistance.m/s:s:You throw a baseball directly upward at time t = 0 at an initial speed of 12.9 m/s. What is the maximum height the ball reaches above where it leaves your hand? At what times does the ball pass through half the maximum height? Ignore air resistance and take g = 9.80 m/s2.Maximum height:Earlier time at half maximum height:Later time at half maximum height:
Answer:
1.a) 3.93 m/s
b) 0.80 s
2. a) 8.49 m
b) 0.39 s
Explanation:
1. a) The speed at which the fox leaves the snow can be found as follows:
[tex] v_{f}^{2} = v_{0}^{2} - 2gH [/tex]
Where:
g: is the gravity = 9.80 m/s²
[tex]v_{f}[/tex]: is the final speed = 0 (at the maximum height)
[tex]v_{0}[/tex]: is the initial speed =?
H: is the maximum height = 79 cm = 0.79 m
[tex] v_{0} = \sqrt{2gH} = \sqrt{2*9.80 m/s^{2}*0.79 m} = 3.93 m/s [/tex]
Hence, the speed at which the fox leaves the snow is 3.93 m/s.
b) The time at which the fox reaches the maximum height is given by:
[tex]v_{f} = v_{0} - gt[/tex]
[tex]t = \frac{v_{0} - v_{f}}{g} = \frac{3.93 m/s}{9.80 m/s^{2}} = 0.40 s[/tex]
Now, the time of flight is:
[tex] t_{v} = 2t = 2*0.40 s = 0.80 s [/tex]
2. a) The maximum height the ball reaches is:
[tex] H = \frac{v_{0}^{2} - v_{f}^{2}}{2g} = \frac{(12.9 m/s)^{2}}{2*9.80 m/s^{2}} = 8.49 m [/tex]
Then, the maximum height is 8.49 m.
b) The time at which the ball passes through half the maximum height is:
[tex]y_{f} = y_{0} + v_{0}t - \frac{1}{2}gt^{2}[/tex]
Taking y₀ = 0 and [tex]y_{f}[/tex] = 8.49/2 = 4.245 m we have:
[tex] 4.245 m -12.9m/s*t + \frac{1}{2}*9.80m/s^{2}*t^{2} = 0 [/tex]
By solving the above quadratic equation we have:
t = 0.39 s
Therefore, the time at which the ball passes through half the maximum height when the ball is going up is 0.39 s.
I hope it helps you!
Please give a step by step explanation: 30 points up for grabs.
Answer:
Honestly, I don't know ¯\_(ツ)_/¯
Explanation:
Using your knowledge on personal care products, how does sunscreen
lotion protect your skin from the damaging effect of ultraviolet rays?
Explain why of x-rays and gamma rays are commonly used in
radiotherapy.
Answer:
Ultraviolet rays from sun are very harmful from skin and can cause sunburn and skin diseases especially ultraviolet B rays. A sunscreen lotion act as a protection barrier on the skin that restrict the direct contact of UV rays with skin and filter the harmful rays to enter the skin.
Radiotherapy is a medical therapy use to treat cancer. Radiotherapy commonly uses x-rays and gamma rays because they are high-energy particles or waves that kills or destroys the cancer cells.
Sunscreen lotion is able to filter this damaging ultraviolet radiation and prevent it from damaging the skin.
The sun reaches us from outer space brings ultraviolet rays to us. Ultraviolet rays are known to have some damaging effects on the skin. One way to protect our skin from this damaging ultraviolet rays is to use sunscreen lotion which is able to filter this damaging ultraviolet radiation and prevent it from damaging the skin.
X-rays and gamma rays are used in radiotherapy because they are light energy rays which are able to penetrate and destroy malignant cells in the body.
Learn more: https://brainly.com/question/13695751
Which of the following best describes what were wrong with the scientists study
define stress engineering science
Answer:
Stress, in physical sciences and engineering, force per unit area within materials that arises from externally applied forces, uneven heating, or permanent deformation and that permits an accurate description and prediction of elastic, plastic, and fluid behaviour.
I hope it's helpful!
A simple pendulum of length 5.5 m makes 10.0 complete swings in 25 s what is the acceleration due to gravity at the location of the pendulum ?
Answer:
The acceleration due to gravity at the location of the pendulum is 34.74 m/s².
Explanation:
Given that,
The length of a simple pendulum, l = 5.5 m
It makes 10.0 complete swings in 25 s.
Frequency of pendulum,
[tex]f=\dfrac{10}{25}\\\\f=0.4\ Hz[/tex]
The time period of a simple pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]
Frequency,
[tex]f=\dfrac{1}{T}\\\\f=\dfrac{1}{2\pi \sqrt{\dfrac{l}{g}} }\\\\f=\dfrac{1}{2\pi}\sqrt{\dfrac{g}{l}}[/tex]
g is the acceleration due to gravity at the location where the pendulum is placed. So,
[tex]f^2=\dfrac{g}{4\pi^2l}\\\\g=f^2\times 4\pi^2l\\\\g=0.4^2\times 4\pi^2\times 5.5\\\\g=34.74\ m/s^2[/tex]
So, the acceleration due to gravity at the location of the pendulum is 34.74 m/s².
How is light energy different from both sound and heat energy?
A.
Sound energy is a wave.
B.
Light energy can exist independently of matter.
C.
Heat energy can radiate from an object.
D.
Light is more energetic when its frequency is higher.
Answer:
B. Light energy can exist independently of matter.
Explanation:
In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Generally, matter exists in three (3) distinct or classical phases and these are;
I. Solid.
II. Liquid.
III. Gas.
Light energy is different from both sound and heat energy because light energy can exist independently of matter.
Generally, we know that light energy is a type of electromagnetic waves and as such do not require a medium of propagation for it to travel through a vacuum of space where no particles exist. For example, light energy from distant galaxy of stars and the sun.
However, both sound and heat energy are mechanical waves which are highly dependent on matter for their propagation and transmission.
An ideal monatomic gas initially has a temperature of 300 K and a pressure of 5.79 atm. It is to expand from volume 420 cm3 to volume 1450 cm3. If the expansion is isothermal, what are (a) the final pressure and (b) the work done by the gas
Answer:
a) The final pressure is 1.68 atm.
b) The work done by the gas is 305.3 J.
Explanation:
a) The final pressure of an isothermal expansion is given by:
[tex] T = \frac{PV}{nR} [/tex]
[tex] T_{i} = T_{f} [/tex]
[tex] \frac{P_{i}V_{i}}{nR} = \frac{P_{f}V_{f}}{nR} [/tex]
Where:
[tex]P_{i}[/tex]: is the initial pressure = 5.79 atm
[tex]P_{f}[/tex]: is the final pressure =?
[tex]V_{i}[/tex]: is the initial volume = 420 cm³
[tex]V_{f}[/tex]: is the final volume = 1450 cm³
n: is the number of moles of the gas
R: is the gas constant
[tex] P_{f} = \frac{P_{i}V_{i}}{V_{f}} = \frac{5.79 atm*420 cm^{3}}{1450 cm^{3}} = 1.68 atm [/tex]
Hence, the final pressure is 1.68 atm.
b) The work done by the isothermal expansion is:
[tex] W = P_{i}V_{i}ln(\frac{V_{f}}{V_{i}}) = 5.79 atm*\frac{101325 Pa}{1 atm}*420 cm^{3}*\frac{1 m^{3}}{(100 cm)^{3}}ln(\frac{1450 cm^{3}}{420 cm^{3}}) = 305.3 J [/tex]
Therefore, the work done by the gas is 305.3 J.
I hope it helps you!
A friend comments to you that there was a beautiful, thin sliver of a Moon visible in the early morning just before sunrise. Which phase of the Moon would this be, and in what direction would you look to see the Moon (in the southern sky, on the eastern horizon, on the western horizon, high in the sky, etc.)?
Answer: Waning Crescent
Explanation:
What is the mass of an object if it is moving at a speed of 10 m/s and has 400 J of kinetic energy?
Answers:
8 kg
Explanation:
Kinetic Energy = (mass × velocity × velocity) ÷ 2
We know that Kinetic Energy = 400 J and velocity = 10 m/s.
KE = (m × v × v) ÷ 2
400 J = (m × 10 m/s × 10 m/s) ÷ 2
400 J = m × 50 m^2/s^2
To find the mass you will divide 400 J and 50 m^2/s^2.
m = 8 kg
You can also check it if it gives you 400 J.
KE = (m × v × v) ÷ 2
KE = (8 kg × 10 m/s × 10 m/s) ÷ 2
KE = 400 J
So this means that the mass is 8 kg. I know that it is a bit confusing, but when you do J (joules) ÷ m^2/s^2 = kg (kilograms). Hope this helps, thank you !!
Can someone help me grasp the concept of solving this please
Answer:
Q= m × c × change in tempQ= 1000 cal/kg × C Q= (5kg) × (1000 ) × (100-13) Q= 435000Hence 4.35 × 10^5 Ask any questions!I also do quizzes and exams if your interested!The degree of relationship between two or more variables is _________.
First you lift an object from the floor onto a shelf. Then you move the object back to the floor. do you perform the same amount of work each time? Explain.
One reason why it’s often easy to miss an action-reaction pair is because of the ________ of one of the objects.
Answer:
an action-reaction pair is because one of the objects is often much more massive and appears to remain motionless when a force acts on it. It has so much inertia, or tendency to remain at rest, that it hardly
Fred's lightbulb is 45% efficient, and Fran's is 75% efficient. If they both use the same amount of electric energy, which produces more light energy?
Answer:
Frank's 75% efficient light bulb will shine brighter.
Explanation:
The brightness of a bulb is gotten from the power equation;
P = I²R
The more the power rating in watts, the more the brightness.
Now, if they both use the same amount of energy but yet have different efficiency, it means we will just multiply the efficiency by the power.
Thus, 75% efficiency will yield more power than a 45% efficient one.
Therefore, Frank's light bulb will shine brighter.
A river flows with a uniform velocity vr. A person in a motorboat travels 1.22 km upstream, at which time she passes a log floating by. Always with the same engine throttle setting, the boater continues to travel upstream for another 1.45 km, which takes her 69.1 min. She then turns the boat around and returns downstream to her starting point, which she reaches at the same time as the same log does. How much time does the boater spend traveling back downstream
Answer:
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex], v_r = 1 m/s t ’= 547.19 s
Explanation:
This is a relative velocity exercise in a dimesion, since the river and the boat are going in the same direction.
By the time the boat goes up the river
v_b - v_r = d / t
By the time the boat goes down the river
v_b + v_r = d '/ t'
let's subtract the equations
2 v_r = d ’/ t’ - d / t
d ’/ t’ = 2v_r + d / t
[tex]t' = \frac{d'}{ \frac{d}{t}+ 2 v_r }[/tex]
In the exercise they tell us
d = 1.22 +1.45 = 2.67 km= 2.67 10³ m
d ’= 1.45 km= 1.45 1.³ m
at time t = 69.1 min (60 s / 1min) = 4146 s
the speed of river is v_r
t ’= [tex]\frac{1.45 \ 10^3}{ \frac{ 2670}{4146} \ + 2 \ v_r}[/tex]
t ’= [tex]\frac{1450}{0.6499 + 2 v_r}[/tex]
In order to complete the calculation, we must assume a river speed
v_r = 1 m / s
let's calculate
t ’= [tex]\frac{ 1450}{ 0.6499 + 2 \ 1}[/tex]
t ’= 547.19 s
According to Coulomb's Law, if the distance between two charged particles is doubled, the electric force will be _________. *
Answer: reduced by 1/4
Explanation:
The force will be reduced by 1/4. Try plugging in 2r, then squaring it. You will get 4r^2, which is essentially dividing the force by 4