Explanation:
[tex]1.2 \mathrm{N} ; 2 \mathrm{N}[/tex]
2.[tex]200 \mathrm{N} ; 200 \mathrm{N}[/tex]
4.[tex]2 \mathrm{N} ; 2 \mathrm{N} ; 4 \mathrm{N}[/tex]
[tex]5.2 \mathrm{N} ; 2 \mathrm{N} ; 2 \mathrm{N}[/tex]
[tex]6.2 \mathrm{N} ; 2 \mathrm{N} ; 3 \mathrm{N}[/tex]
[tex]8.200 \mathrm{N} ; 200 \mathrm{N} ; 5 \mathrm{N}[/tex]
In only the above cases (i.e 1,2,4,5,6,8 ) the object possibly moves at a constant velocity of [tex]256 \mathrm{m} / \mathrm{s}[/tex]
You should have noticed that the sets of forces applied to the object are the same asthe ones in the prevous question. Newton's 1st law (and the 2nd law, too) makes nodistinction between the state of re st and the state of moving at a constant velocity(even a high velocity).
In both cases, the net force applied to the object must equal zero.
The rock and meterstick balance at the 25-cm mark, as shown in the sketch. The meterstick has a mass of 1 kg. What must be the mass of the rock? (Show work).
Answer:
1 kgExplanation:
Check the diagram attached below for the diagram.
Let the weight of the rock be W and the mass of the meter stick be M. Note that the mass of the meter stick will be placed at the middle of the meter stick i.e at the 50cm mark
Using the principle of moment to calculate the weight of the rock. It states that the sum of clockwise moments is equal to the sum of anti clockwise moment.
Moment = Force * perpendicular distance
The meterstick acts in the clockwise direction while the rock acys in the anti clockwise direction
Clockwise moment = 1kg * 25 = 25kg/cm
Anticlockwise moment = W * 25cm = 25W kg/cm
Equating both moments of forces
25W = 25
W = 25/23
W = 1 kg
The mass of the rock is also 1 kg
A skater on ice with arms extended and one leg out spins at 3 rev/s. After he draws his arms and the leg in, his moment of inertia is reduced to 1/2. What is his new angular speed
Answer:
The new angular speed is [tex]w = 6 \ rev/s[/tex]
Explanation:
From the question we are told that
The angular velocity of the spin is [tex]w_o = 3 \ rev/s[/tex]
The original moment of inertia is [tex]I_o[/tex]
The new moment of inertia is [tex]I =\frac{I_o}{2}[/tex]
Generally angular momentum is mathematically represented as
[tex]L = I * w[/tex]
Now according to the law of conservation of momentum, the initial momentum is equal to the final momentum hence the angular momentum is constant so
[tex]I * w = constant[/tex]
=> [tex]I_o * w _o = I * w[/tex]
where w is the new angular speed
So
[tex]I_o * 3 = \frac{I_o}{2} * w[/tex]
=> [tex]w = \frac{3 * I_o}{\frac{I_o}{2} }[/tex]
=> [tex]w = 6 \ rev/s[/tex]
A player is positioned 35 m[40 degrees W of S] of the net. He shoot the puck 25 m [E] to a teammate. What second displacement does the puck have to travel in order to make it to the net?
Answer:
x=22.57 m
Explanation:
Given that
35 m in W of S
angle = 40 degrees
25 m in east
From the diagram
The angle
[tex]\theta=90-40=50^o[/tex]
From the triangle OAB
[tex]cos40^o=\frac{35^2+25^2-x^2}{2\times 35\times 25}[/tex]
[tex]1340.57=35^2+25^2-x^2[/tex]
x=22.57 m
Therefore the answer of the above problem will be 22.57 m
A 2.3kg bicycle wheel has a diameter of 50cm. What torque must you apply to take the wheel from 0rpm to 120rpm in 5.5s?
Answer:
τ = 0.26 N.m
Explanation:
First we find the moment of inertia of the wheel, by using the following formula:
I= mr²
where,
I = Moment of Inertia = ?
m = mass of wheel = 2.3 kg
r = radius of wheel = 50 cm/2 = 25 cm = 0.25 m
Therefore,
I = (2.3 kg)(0.25 m)²
I = 0.115 kg.m²
Now, we find the angular acceleration of the wheel:
α = (ωf - ωi)/t
where,
α = angular acceleration = ?
ωf = final angular velocity = (120 rpm)(2π rad/1 rev)(1 m/60 s) = 12.56 rad/s
ωi = Initial Angular Velocity = 0 rad/s
t = time = 5.5 s
Therefore,
α = (12.56 rad/s - 0 rad/s)/(5.5 s)
α = 2.28 rad/s²
Now, the torque is given as:
Torque = τ = Iα
τ = (0.115 kg.m²)(2.28 rad/s²)
τ = 0.26 N.m
When a particular wire is vibrating with a frequency of 6.3 Hz, a transverse wave of wavelength 53.3 cm is produced. Determine the speed of wave pulses along the wire.
Answer:
335.79cm/s
Explanation:
When a transverse wave of wavelength λ is produced during the vibration of a wire, the frequency(f), and the speed(v) of the wave pulses are related to the wavelength as follows;
v = fλ ------------------(ii)
From the question;
f = 6.3Hz
λ = 53.3cm
Substitute these values into equation (i) as follows;
v = 6.3 x 53.3
v = 335.79cm/s
Therefore, the speed of the wave pulses along the wire is 335.79cm/s
A ball is thrown directly downward with an initial speed of 7.95 m/s, from a height of 29.0 m. After what time interval does it strike the ground?
Answer: after 1.75 seconds
Explanation:
The only force acting on the ball is the gravitational force, so the acceleration will be:
a = -9.8 m/s^2
the velocity can be obtained by integrating over time:
v = -9.8m/s^2*t + v0
where v0 is the initial velocity; v0 = -7.95 m/s.
v = -9.8m/s^2*t - 7.95 m/s.
For the position we integrate again:
p = -4.9m/s^2*t^2 - 7.95 m/s*t + p0
where p0 is the initial position: p0 = 29m
p = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Now we want to find the time such that the position is equal to zero:
0 = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Then we solve the Bhaskara's equation:
[tex]t = \frac{7.95 +- \sqrt{7.95^2 +4*4.9*29} }{-2*4.9} = \frac{7.95 +- 25.1}{9.8}[/tex]
Then the solutions are:
t = (7.95 + 25.1)/(-9.8) = -3.37s
t = (7.95 - 25.1)/(-9.8) = 1.75s
We need the positive time, then the correct answer is 1.75s
An isolated capacitor with capacitance C = 1 µF has a charge Q = 45 µC on its plates.a) What is the energy stored in the capacitor?Now a conductor is inserted into the capacitor. The thickness of the conductor is 1/3 the distance between the plates of the capacitor and is centered inbetween the plates of the capacitor.b) What is the charge on the plates of the capacitor?c) What is the capacitance of the capacitor with the conductor in place?d) What is the energy stored in the capacitor with the conductor in place?
Answer:
a) Energy stored in the capacitor, [tex]E = 1.0125 *10^{-3} J[/tex]
b) Q = 45 µC
c) C' = 1.5 μF
d) [tex]E = 6.75 *10^{-4} J[/tex]
Explanation:
Capacitance, C = 1 µF
Charge on the plates, Q = 45 µC
a) Energy stored in the capacitor is given by the formula:
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{2}\\\\E = 1012.5 *10^{-6}\\\\E = 1.0125 *10^{-3} J[/tex]
b) The charge on the plates of the capacitor will not change
It will still remains, Q = 45 µC
c) Electric field is non zero over (1-1/3) = 2/3 of d
From the relation V = Ed,
The voltage has changed by a factor of 2/3
Since the capacitance is given as C = Q/V
The new capacitance with the conductor in place, C' = (3/2) C
C' = (3/2) * 1μF
C' = 1.5 μF
d) Energy stored in the capacitor with the conductor in place
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1.5* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{3}\\\\E = 675 *10^{-6}\\\\E = 6.75 *10^{-4} J[/tex]
Two objects attract each other with a gravitational force of magnitude 1.02 10-8 N when separated by 19.7 cm. If the total mass of the two objects is 5.14 kg, what is the mass of each
Answer:
The two masses are 3.39 Kg and 1.75 Kg
Explanation:
The gravitational force of attraction between two bodies is given by the formula;
F = Gm₁m₂/d²
where G is the gravitational force constant = 6.67 * 10⁻¹¹ Nm²Kg⁻²
m₁ = mass of first object; m₂ = mass of second object; d = distance of separation between the objects
Further calculations are provided in the attachment below
A 10 gauge copper wire carries a current of 23 A. Assuming one free electron per copper atom, calculate the magnitude of the drift velocity of the electrons.
Question:
A 10 gauge copper wire carries a current of 15 A. Assuming one free electron per copper atom, calculate the drift velocity of the electrons. (The cross-sectional area of a 10-gauge wire is 5.261 mm².)
Answer:
3.22 x 10⁻⁴ m/s
Explanation:
The drift velocity (v) of the electrons in a wire (copper wire in this case) carrying current (I) is given by;
v = [tex]\frac{I}{nqA}[/tex]
Where;
n = number of free electrons per cubic meter
q = electron charge
A = cross-sectional area of the wire
First let's calculate the number of free electrons per cubic meter (n)
Known constants:
density of copper, ρ = 8.95 x 10³kg/m³
molar mass of copper, M = 63.5 x 10⁻³kg/mol
Avogadro's number, Nₐ = 6.02 x 10²³ particles/mol
But;
The number of copper atoms, N, per cubic meter is given by;
N = (Nₐ x ρ / M) -------------(ii)
Substitute the values of Nₐ, ρ and M into equation (ii) as follows;
N = (6.02 x 10²³ x 8.95 x 10³) / 63.5 x 10⁻³
N = 8.49 x 10²⁸ atom/m³
Since there is one free electron per copper atom, the number of free electrons per cubic meter is simply;
n = 8.49 x 10²⁸ electrons/m³
Now let's calculate the drift electron
Known values from question:
A = 5.261 mm² = 5.261 x 10⁻⁶m²
I = 23A
q = 1.6 x 10⁻¹⁹C
Substitute these values into equation (i) as follows;
v = [tex]\frac{I}{nqA}[/tex]
v = [tex]\frac{23}{8.49*10^{28} * 1.6 *10^{-19} * 5.261*10^{-6}}[/tex]
v = 3.22 x 10⁻⁴ m/s
Therefore, the drift electron is 3.22 x 10⁻⁴ m/s
Use Coulomb’s law to derive the dimension for the permittivity of free space.
Answer:
Coulomb's law is:
[tex]F = \frac{1}{4*pi*e0} *(q1*q2)/r^2[/tex]
First, force has units of Newtons, the charges have units of Coulombs, and r, the distance, has units of meters, then, working only with the units we have:
N = (1/{e0})*C^2/m^2
then we have:
{e0} = C^2/(m^2*N)
And we know that N = kg*m/s^2
then the dimensions of e0 are:
{e0} = C^2*s^2/(m^3)
(current square per time square over cubed distance)
And knowing that a Faraday is:
F = C^2*S^2/m^2
The units of e0 are:
{e0} = F/m.
g A change in the initial _____ of a projectile changes the range and maximum height of the projectile.
Answer:
Velocity.
Explanation:
Projectile motion is characterized as the motion that an object undergoes when it is thrown into the air and it is only exposed to acceleration due to gravity.
As per the question, 'any change in the initial velocity of the projectile(object having gravity as the only force) would lead to a change in the range as well as the maximum height of the projectile.' To illustrate numerically:
Horizontal range: As per expression:
R= ([tex]u^{2}[/tex]*sin2θ)/g
the range depending on the square of the initial velocity.
Maximum height: As per expression:
H= ([tex]u^{2}[/tex] * [tex]sin^{2}[/tex]θ )/2g
the maximum distance also depends upon square of the initial velocity.
We learned that light travels more slowly in glass than in air. Does this contradict the theory of relativity?
Answer:
Yes.
Explanation:
Law of relativity in relation to light states that the speed of light in a vacuum does not depend on all the motion of the observers and that all motion must be defined relative to a frame of reference and that space and time are relative, rather than absolute concepts. This was formulated by Albert Einstein in 1905.
Light travels more slowly in gas than in air because it interacts with atoms of glass that made it way through it and the refractive index of glass is more than air. This does contradict the theory of relativity as the speed of lights travel slower in glass because it's motion is slow and it is not relative.
Suppose the frequency of a note on an organ is 18 Hz. What is the shortest organ pipe with both ends open that will resonate at this frequency
Answer:
9.53 m
Explanation:
The computation of shortest organ pipe with both ends open that will resonate at this frequency is shown below:-
[tex]\lambda = \frac{velocity}{frequency}[/tex]
[tex]= \frac{343}{18}[/tex]
= 19.06 m
Now the
Shortest organ pipe with both ends open is
= [tex]\frac{\lambda}{2}[/tex]
[tex]= \frac{19.06}{2}[/tex]
= 9.53 m
Basically we applied the above formulas so that first we easily determined the shortest organ pipe for both ends at this frequency
Flower bed is filled with five types of flowers. Which placement of the flowers represents the highest entropy?
Answer:
B
Explanation:
ANSEWER :B IN ROWS ONLY
A skydiver falls toward the ground at a constant velocity. Which statement best applies Newton’s laws of motion to explain the skydiver’s motion?
Answer:
A: An upward force balances the downward force of gravity on the skydiver.
Explanation:
on edge! hope this helps!!~ (⌒▽⌒)☆
A "laser cannon" of a spacecraft has a beam of cross-sectional area A. The maximum electric field in the beam is 2E. The beam is aimed at an asteroid that is initially moving in the direction of the spacecraft. What is the acceleration of the asteroid relative to the spacecraft if the laser beam strikes the asteroid perpendicularly to its surface, and the surface is not reflecting
Answer:
Acceleration of the asteroid relative to the spacecraft = 2ε[tex]E^{2}[/tex]A/m
Explanation:
The maximum electric field in the beam = 2E
cross-sectional area of beam = A
The intensity of an electromagnetic wave with electric field is
I = cε[tex]E_{0} ^{2}[/tex]/2
for [tex]E_{0}[/tex] = 2E
I = 2cε[tex]E^{2}[/tex] ....equ 1
where
I is the intensity
c is the speed of light
ε is the permeability of free space
[tex]E_{0}[/tex] is electric field
Radiation pressure of an electromagnetic wave on an absorbing surface is given as
P = I/c
substituting for I from above equ 1. we have
P = 2cε[tex]E^{2}[/tex]/c = 2ε[tex]E^{2}[/tex] ....equ 2
Also, pressure P = F/A
therefore,
F = PA ....equ 3
where
F is the force
P is pressure
A is cross-sectional area
substitute equ 2 into equ 3, we have
F = 2ε[tex]E^{2}[/tex]A
force on a body = mass x acceleration.
that is
F = ma
therefore,
a = F/m
acceleration of the asteroid will then be
a = 2ε[tex]E^{2}[/tex]A/m
where m is the mass of the asteroid.
Two carts are connected by a loaded spring on a horizontal, frictionless surface. The spring is released and the carts push away from each other. Cart 1 has mass M and Cart 2 has mass M/3.
a) Is the momentum of Cart 1 conserved?
Yes
No
It depends on M
b) Is the momentum of Cart 2 conserved?
Yes
No
It depends on M
c) Is the total momentum of Carts 1 and 2 conserved?
Yes
No
It depends on M
d) Which cart ends up moving faster?
Cart 1
Cart 2
They move at the same speed
e) If M = 6 kg and Cart 1 moves with a speed of 16 m/s, what is the speed of Cart 2?
0 m/s
4.0 m/s
5.3 m/s
16 m/s
48 m/s
64 m/s
Answer:
a) yes
b) no
c) yes
d)Cart 2 with mass [tex]\frac{M}{3}[/tex] is expected to be more faster
e) u₂ = 48 m/s
Explanation:
a) the all out linear momentum of an arrangement of particles of Cart 1 not followed up on by external forces is constant.
b) the linear momentum of Cart 2 will be acted upon by external force by Cart 1 with mass M, thereby it's variable and the momentum is not conserved
c) yes, the momentum is conserved because no external force acted upon it and both Carts share the same velocity after the reaction
note: m₁u₁ + m₂u₂ = (m₁ + m₂)v
d) Cart 2 with mass [tex]\frac{M}{3}[/tex] will be faster than Cart 1 because Cart 2 is three times lighter than Cart 1.
e) Given
m₁= M
u₁ = 16m/s
m₂ =[tex]\frac{M}{3}[/tex]
u₂ = ?
from law of conservation of momentum
m₁u₁= m₂u₂
M× 16 = [tex]\frac{M}{3}[/tex] × u₂(multiply both sides by 3)
therefore, u₂ = [tex]\frac{3(M .16)}{M}[/tex] ("." means multiplication)
∴u₂ = 3×16 = 48 m/s
what is the value of the tropic of cancer
Answer: The latitudinal value of tropic of cancer is 23.5° N on June 21, when the sun is directly up above the head at noon. The Equator is the circle at which sun is straight above the head.
Explanation:
A uniform crate C with mass mC is being transported to the left by a forklift with a constant speed v1. What is the magnitude of the angular momentum of the crate about point A, that is, the point of contact between the front tire of the forklift and the ground
Answer:
The angular momentum of the crate is [tex]M_{C} V_{1} d[/tex]
Explanation:
mass of the crate = [tex]M_{C}[/tex]
speed of forklift = [tex]V_{1}[/tex]
The distance between the center of the mass and the point A = d
Recall that the angular moment is the moment of the momentum.
[tex]L = P*d[/tex] ..... equ 1
where L is the angular momentum,
P is the momentum of the system,
d is the perpendicular distance between the crate and the point on the axis about which the momentum acts. It is equal to d from the image
Also, we know that the momentum P is the product of mass and velocity
P = mv ....equ 2
in this case, the mass = [tex]M_{C}[/tex]
the velocity = [tex]V_{1}[/tex]
therefore, the momentum P = [tex]M_{C}[/tex][tex]V_{1}[/tex]
we substitute equation 2 into equation 1 to give
[tex]L = M_{C} V_{1} d[/tex]
Observe the process by which the grey and the red spheres are charged using the electrophorus. After each sphere is first charged, what are their charges
Answer:
The gray spheres is negatively charged while the red is positively charged
Explanation:
This is because theelectrophorus becomes less positive once it pulls some electrons away from the red sphere, but, the electrophorus is replaced on the slab and recharged by grounding it before it proceeds to charge the grey sphere, thereby giving it electrons and making it negatively charged
Answer:
The gray sphere has a positive charge and the red sphere has a positive charge.
Two spaceships are observed from earth to be approaching each other along a straight line. Ship A moves at 0.40c relative to the earth observer, while ship B moves at 0.60c relative to the same observer. What speed does the captain of ship A report for the speed of ship B
Answer:
0.80 c
Explanation:
The computation of speed is shown below:-
Here, The speed of the captain ship A report for speed of the ship B which is
[tex]S = \frac{S_A + S_B}{1 + \frac{(S_AS_B)}{c^2} }[/tex]
where
[tex]S_A[/tex] indicates the speed of the ship A
[tex]S_B[/tex] indicates the speed of the ship B
and
C indicates the velocity of life
now we will Substitute 0.40c for A and 0.60 for B in the equation which is
[tex]S = \frac{0.40c + 0.60c}{1 + \frac{(0.40c)(0.60c)}{c^2} }[/tex]
after solving the above equation we will get
0.80 c
So, The correct answer is 0.80c
A 1.0-kg ball is attached to the end of a 2.5-m string to form a pendulum. This pendulum is released from rest with the string horizontal. At the lowest point in its swing when it is moving horizontally, the ball collides elastically with a 2.0-kg block initially at rest on a horizontal frictionless surface. What is the speed of the block just after the collision
Answer:
[tex]v_{2}=3.5 m/s[/tex]
Explanation:
Using the conservation of energy we have:
[tex]\frac{1}{2}mv^{2}=mgh[/tex]
Let's solve it for v:
[tex]v=\sqrt{2gh}[/tex]
So the speed at the lowest point is [tex]v=7 m/s[/tex]
Now, using the conservation of momentum we have:
[tex]m_{1}v_{1}=m_{2}v_{2}[/tex]
[tex]v_{2}=\frac{1*7}{2}[/tex]
Therefore the speed of the block after the collision is [tex]v_{2}=3.5 m/s[/tex]
I hope it helps you!
Two people push on a large gate as shown on the view from above in the diagram. If the moment of inertia of the gate is 90 kgm2, what is the resulting angular acceleration of the gate?
Answer:
1ft per second
Explanation:
Physics is on my side!!!!!!!!!!
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s
Answer:
389 kg
Explanation:
The computation of mass is shown below:-
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
Where K indicates spring constant
m indicates mass
For the new time period
[tex]T^' = 2\pi \sqrt{\frac{m'}{k} }[/tex]
Now, we will take 2 ratios of the time period
[tex]\frac{T}{T'} = \sqrt{\frac{m}{m'} }[/tex]
[tex]\frac{1.50}{2.00} = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]0.5625 = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]m' = \frac{0.500}{0.5625}[/tex]
= 0.889 kg
Since mass to be sum that is
= 0.889 - 0.500
0.389 kg
or
= 389 kg
Therefore for computing the mass we simply applied the above formula.
The mass added to the object to change the period to 2.00 s is 0.389 kg and this can be determined by using the formula of the time period.
Given :
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s.
The formula of the time period is given by:
[tex]\rm T = 2\pi\sqrt{\dfrac{m}{K}}[/tex] ---- (1)
where m is the mass and K is the spring constant.
The new time period is given by:
[tex]\rm T'=2\pi\sqrt{\dfrac{m'}{K}}[/tex] ---- (2)
where m' is the total mass after the addition and K is the spring constant.
Now, divide equation (1) by equation (2).
[tex]\rm \dfrac{T}{T'}=\sqrt{\dfrac{m}{m'}}[/tex]
Now, substitute the known terms in the above expression.
[tex]\rm \dfrac{1.50}{2}=\sqrt{\dfrac{0.5}{m'}}[/tex]
Simplify the above expression in order to determine the value of m'.
[tex]\rm m'=\dfrac{0.5}{0.5625}[/tex]
m' = 0.889 Kg
Now, the mass added to the object to change the period to 2.00 s is given by:
m" = 0.889 - 0.500
m" = 0.389 Kg
For more information, refer to the link given below:
https://brainly.com/question/2144584
An aging coyote cannot run fast enough to catch a roadrunner. He purchases on eBay a set of jet-powered roller skates, which provide a constant horizontal acceleration of 15.0 m/s2. The coyote starts at rest 70.0 m from the edge of a cliff at the instant the roadrunner zips past in the direction of the cliff.
Required:
a. Determine the minimum constant speed the roadrunner must have to reach the cliff before the coyote. At the edge of the cliff, the roadrunner escapes by making a sudden turn, while the coyote continues straight ahead. The coyote’s skates remain horizontal and continue to operate while he is in flight.
b. The cliff is 100 m above the flat floor of the desert. Determine how far from the base of the cliff the coyote lands.
c. Determine the components of the coyote’s impact velocity
Answer:
a) v_correcaminos = 22.95 m / s , b) x = 512.4 m ,
c) v = (45.83 i ^ -109.56 j ^) m / s
Explanation:
We can solve this exercise using the kinematics equations
a) Let's find the time or the coyote takes to reach the cliff, let's start by finding the speed on the cliff
v² = v₀² + 2 a x
they tell us that the coyote starts from rest v₀ = 0 and its acceleration is a=15 m / s²
v = √ (2 15 70)
v = 45.83 m / s
with this value calculate the time it takes to arrive
v = v₀ + a t
t = v / a
t = 45.83 / 15
t = 3.05 s
having the distance to the cliff and the time, we can find the constant speed of the roadrunner
v_ roadrunner = x / t
v_correcaminos = 70 / 3,05
v_correcaminos = 22.95 m / s
b) if the coyote leaves the cliff with the horizontal velocity v₀ₓ = 45.83 m / s, they ask how far it reaches.
Let's start by looking for the time to reach the cliff floor
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
in this case y = 0 and the height of the cliff is y₀ = 100 m
0 = 100 + 45.83 t - ½ 9.8 t²
t² - 9,353 t - 20,408 = 0
we solve the quadratic equation
t = [9,353 ±√ (9,353² + 4 20,408)] / 2
t = [9,353 ± 13] / 2
t₁ = 11.18 s
t₂ = -1.8 s
Since time must be a positive quantity, the answer is t = 11.18 s
we calculate the horizontal distance traveled
x = v₀ₓ t
x = 45.83 11.18
x = 512.4 m
c) speed when it hits the ground
vₓ = v₀ₓ = 45.83 m / s
we look for vertical speed
v_{y} = [tex]v_{oy}[/tex] - gt
v_{y} = 0 - 9.8 11.18
v_{y} = - 109.56 m / s
v = (45.83 i ^ -109.56 j ^) m / s
If, the limits of the visible spectrum are approximately 3000 A.U. and 5000 A.U. respectively. Determine the angular breadth of the first order visible spectrum produced by a plane diffraction grating having 12000 lines per inch when light is incident normally on the grating.
Answer:
θ₁ = 0.04º , θ₂ = 0.00118º
Explanation:
The equation that describes the diffraction pattern of a network is
d sin θ = m λ
where the diffraction order is, in this case they indicate that the order
m = 1
θ = sin⁻¹ (λ / d)
Trfuvsmod ls inrsd fr ll red s SI units
d = 12000 line / inc (1 inc / 2.54cm) = 4724 line / cm
the distance between two lines we can look for it with a direct proportions rule
If there are 4724 lines in a centimeter, the distance for two hundred is
d = 2 lines (1 cm / 4724 line) = 4.2337 10⁻⁴ cm
let's calculate the angles
λ = 300 10-9 m
θ₁ = sin⁻¹ (300 10-9 / 4,2337 10-4)
θ₁ = sin⁻¹ (7.08 10-4)
θ₁ = 0.04º
λ = 5000
θ₂ = sin-1 (500 10-9 / 4,2337 10-4)
θ₂ = 0.00118º
Consider a race between the following three objects: object 1, a disk; object 2, a solid sphere; and object 3, a hollow spherical shell. All objects have the same mass and radius.
Required:
a. Rank the three objects in the order in which they finish the race. To rank objects that tie, overlap them.
b. Rank the objects in order of increasing kinetic energy at the bottom of the ramp. Rank objects from largest to smallest. To rank items as equivalent, overlap them.
Answer:
Since the angular acceleration of the objects will be proportional to the torque (due to gravity) acting on them and they will all experience the same torque their accelerations will be inversely proportional to their moments of inertia:
I disk = 1/2 M R^2
I sphere = 2/5 M R^2
I shell = 2/3 M R^2
Thus the sphere will experience the greatest angular acceleration and reach the bottom first, and then be followed by the disk and the shell.
By conservation of energy they will all have the same kinetic energy when they reach the bottom of the ramp.
(a) The ranking of the objects in order of how they will finish the race is
solid sphere > disk > hollow spherical shell
(b) The ranking of the objects in order of kinetic energy is
solid sphere > disk > hollow spherical shell
The moment of inertia of each object is calculated as follows;
disk: [tex]I = \frac{1} {2} MR^2[/tex]solid sphere: I = [tex]\frac{2}{5} MR^2[/tex]hollow spherical shell: I = [tex]\frac{2}{3} MR^2[/tex]The angular momentum of the objects is calculated as follows;
[tex]L =I \omega \\\\\omega = \frac{L}{I}[/tex]
The object with the least moment of inertia is will have the highest speed.
The ranking of the objects in order of how they will finish the race;
solid sphere > disk > hollow
The kinetic energy of the objects is calculated as follows;
[tex]K.E = \frac{1}{2} I \omega ^2[/tex]
The ranking of the objects in order of kinetic energy;
solid sphere > disk > hollow
Learn more here:https://brainly.com/question/15076457
1. As you pass a freight truck with a trailer on a highway, you notice that its trailer is bouncing up and down slowly. Is it more likely that the trailer is heavily loaded or nearly empty
Answer:
It's more likely that the trailer is heavily loaded
Explanation:
Due to the fact that the frequency is proportional to the square root of the force constant and inversely proportional to the square root of the mass, it is very likely that the truck would be heavily loaded because the force constant would be the same whether the truck is empty or heavily loaded.
The Law of Biot-Savart shows that the magnetic field of an infinitesimal current element decreases as 1/r2. Is there anyway you could put together a complete circuit (any closed path of current-carrying wire) whose field exhibits this same 1/r^2 decrease in magnetic field strength? Explain your reasoning.
Answer and Explanation:
There is no probability of obtaining such a circuit of closed track current carrying wire whose field of magnitude displays i.e. [tex]B \alpha \frac{1}{r^2}[/tex]
The magnetic field is a volume of vectors
And [tex]\phi\ bds = 0[/tex]. This ensures isolated magnetic poles or magnetic charges would not exit
Therefore for a closed path, we never received magnetic field that followed the [tex]B \alpha \frac{1}{r^2}[/tex] it is only for the simple current-carrying wire for both finite or infinite length.
A dipole moment is placed in a uniform electric field oriented along an unknown direction. The maximum torque applied to the dipole is equal to 0.1 N.m. When the dipole reaches equilibrium its potential energy is equal to -0.2 J. What was the initial angle between the direction of the dipole moment and the direction of the electric field?
Answer:
θ = 180
Explanation:
When an electric dipole is placed in an electric field, there is a torque due to the electric force
τ = p x E
by rotating the dipole there is a change in potential energy
ΔU = ∫ τ dθ
ΔU = p E (cos θ₂ - cos θ₁)
when the dipole starts from an angle to the equilibrium position for θ = 0
ΔU = pE (cos θ - cos 0)
cos θ = 1 + DU / pE)
let's apply this expression to our case, the change in potential energy is ΔU = -0.2J
let's calculate
cos θ = 1 -0.2 / 0.1
cos θ = -1
θ = 180