Given
P1 = 1 Atm ( at stp)
V1 = 3.00 L
V2 = 3.20 L
P2 = ?
We know that,
at constant temperature
P1V1 = P2V2
1 × 3 = 3.2 × P2
P2 = 3/3.2
P2 = 0.9375 Atm
pressure at 3.2 L is 0.9375 Atm.
How many Joules of energy are given off when 50 grams of water are cooled from 65-50 degrees Celsius?
3200
3138
47.83
Answer:
3200
Explanation:
because it would book it up first to evaporate it next
A gas occupies a volume of 60 L at a temperature of 0.5 K. What will the volume be at 4 K?
Answer:
480 L
Explanation:
In order to solve this question, you should be familiar with gas laws. (I will attach a picture showing all of them under my answer.) In this question in particular, however, we only need Charles's Law because we're dealing with temperature and volume.
As we can see, Charles's Law is:
[tex]\frac{V_{1} }{T_{1} } = \frac{V_{2} }{T_{2} }[/tex]
or, initial volume over initial temperature equals final volume over final temperature.
In this question, 60 L is our initial volume, and 0.5 K is our initial temperature (K being Kelvin). We are only given 4 K as our final temperature. We are asked to solve for the final volume. Let's set up the equation and solve for [tex]V_{2}[/tex]:
--------------------------------------------------------------------------------------------------------------
(60) / (0.5) = [tex]V_{2}[/tex] / (4)
↓
120 = [tex]V_{2}[/tex] / 4
×4 ×4
↓
[tex]V_{2}[/tex] = 480 L
--------------------------------------------------------------------------------------------------------------
There's our answer! Feel free to comment if you have any questions about my answer :)
Answer is C
Zeke is attempting to react a piece of magnesium metal with sulfuric acid. The sulfuric acid is a 5M solution. What could Zeke do
to slow down the rate at which the magnesium will react with the acid?
A)
increase the temperature
B)
add a 10M sulfuric acid solution
9)
add water to the acid to decrease its molarity
D)
add more of the 5M sulfuric acid to the reaction
Answer:
c)
Explanation:
add water to the acid to decrease its molarity
Please help me ASAP!!!!
Answer:
Explanation:
Determine the balanced chemical equation for the chemical reaction.
Convert all given information into moles (most likely, through the use of molar mass as a conversion factor).
Calculate the mole ratio from the given information.
Definition: This is the energy that comes to Earth from the Sun.
Example: using the sun to dry your laundry hanging on the clothesline
Answer:
well to me it is called natural energy
Prokaryotic and eukaryotic cells have many different characteristics. One difference
between prokaryotic and eukaryotic cells is that all eukaryotic cells —
Answer:
Have a nucleus
Explanation:
Pls check..
Which of the following isotopes have 8 neutrons in the nucleus?
O-15
O-17
C-13
C-14
Answer:
C-14 have 8 neutrons in the nucleus.
Carbon atoms with 8 neutrons have an atomic mass of 14 (6 protons + 8 neutrons = 14), so this isotope of carbon is named carbon-14.
hope it helps :)
Explanation:
Answer:
its d
Explanation:
edge 21
The picture below shows brown bears by the side of a river.
In this environment, the brown bears by the river are
Answer:
being peaceful
and washing up
A Chemist reacted magnesium and aluminum oxide. A reaction takes place. Explain why
Explanation:
when Magnesium is reacted with Aluminum oxide, Aluminum being a less reactive metal than magnesium, is replaced by magnesium
Al2O3 + 3Mg - 3MgO + 2Al
hence reaction takes place
What is the pressure of gas at 496 Liters and 200 Kelvin if the original pressure was 0.250 atm. at 300 liters and 400 kelvin?
Answer:
0.076 atm
Explanation:
Using the combined gas law formula;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (atm)
P2 = final pressure (atm)
T1 = initial temperature (K)
T2 = final temperature (K)
V1 = initial volume (L)
V2 = final volume (L)
According to the information provided in this question;
P2 = ?
P1 = 0.250 atm
V2 = 496 L
V1 = 300 L
T2 = 200K
T1 = 400K
Using P1V1/T1 = P2V2/T2
0.250 × 300/400 = P2 × 496/200
75/400 = 496 P2/200
0.1875 = 2.48P2
P2 = 0.1875 ÷ 2.48
P2 = 0.076 atm
True or false gases have no mass
Answer:
Gases have mass, because they are made up molecules which have mass
In the given question, the given statement about gases have no mass is false.
The amount of substance in a thing is measured by mass, which is a physical attribute of matter. It is usually expressed in grams (g) or kilograms (kg).
Gases do have mass. The statement is false because gases consist of molecules that have mass.
Various ways can be used to determine the mass of a gas, such as weighing the container in which the gas is contained before and afterwards the gas is supplied. Additionally, the ideal gas law,[tex]\rm PV = nRT[/tex], includes the variable "n" which represents the number of moles of gas, indicating that gases do indeed have mass.Therefore, the given statement is false about gases having no mass.
Learn more about mass here:
https://brainly.com/question/11954533
#SPJ4
1.) What is the difference between renewable and nonrenewable resources?
2.) Explain why people need to begin using renewable resources instead of nonrenewable
resources.
Answer: 1.) renewable resources can be replenished as fast as they are used. Nonrenewable resources are unable to be replaced at the same rate at which they are used. 2.) nonrenewable energy sources will eventually run out, leaving people to figure out how to continue running their cars, homes, and busines. They must find alternative sources of energy. Since renewable energy resources that will never run out, it is a great option.
Explanation:
What does all matter have in common?
A.
It is made up of atoms.
B.
It is made up of molecules.
C.
It is all solid.
D.
It is too small to see.
1. For the reaction below, which change would cause the equilibrium
to shift to the right?
CH,(g) + 2H,S(g) + heat --
CS,(g) + 4H,(g)
(a) Decrease the concentration of H,S.
(b) Increase the pressure on the system.
(c) Increase the temperature of the system.
(d) Increase the concentration of CS,
(e) Decrease the concentration of CH.
option c is the correct answer
because the gas there will be evolved and caused the equilibrium to shift to right side
How many moles is 17.6 g NaOH?
a
0.567 mol NaOH
b 227 mol NaOH
C
0.704 mol NaOH
d 0.440 mol NaOH
Answer:
[tex]\boxed {\boxed {\sf D. 0.440 \ mol \ NaOH}}[/tex]
Explanation:
To convert from moles to grams, the molar mass is used (mass of 1 mole). The values are the same as the atomic masses on the Periodic Table, but the units are grams per mole (g/mol) instead of atomic mass units.
1. Molar MassWe are given the compound sodium hydroxide (NaOH) and we need to look up the molar masses of the individual elements.
Na: 22.9897693 g/mol O: 15.999 g/molH: 1.008 g/molThe formula for the compound has no subscripts, so there is 1 mole of each element in 1 mole of the substance. We can simply add the molar masses.
NaOH: 22.9897693 + 15.999 + 1.008 = 39.9967693 g/molThis means there are 39.9967693 grams of sodium hydroxide in 1 mole.
2. Convert Grams to MolesUse the molar mass we found as a ratio.
[tex]\frac {39.9967693 \ g \ NaOH}{ 1 \ mol \ NaOH}[/tex]
Since we are converting 17.6 grams of NaOH to moles, we multiply by this value.
[tex]17.6 \ g\ NaOH *\frac {39.9967693 \ g \ NaOH}{ 1 \ mol \ NaOH}[/tex]
Flip the ratio so the units of grams of NaOH cancel.
[tex]17.6 \ g\ NaOH *\frac {1 \ mol \ NaOH}{ 39.9967693 \ g \ NaOH}[/tex]
[tex]17.6 *\frac {1 \ mol \ NaOH}{ 39.9967693}[/tex]
[tex]\frac{17.6 }{ 39.9967693} \ mol \ NaOH[/tex]
[tex]0.4400355406 \ mol \ NaOH[/tex]
3. RoundThe original measurement of grams has 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.
0.4400355406The 0 in the ten thousandths place (in bold above) tells us to leave the 0 in the thousandth place.
[tex]0.440 \ mol \ NaOH[/tex]
17.6 grams of sodium hydroxide are equal to 0.440 moles of sodium hydroxide.
A gas has a volume of 300 mL in a rigid container at 50oC and 1.75 atm. What will be its pressure at 100K?
Answer:
Its pressure will be 0.54 atm at 100 K.
Explanation:
Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
Gay-Lussac's law can be expressed mathematically as the quotient between pressure and temperature equal to a constant:
[tex]\frac{P}{T} =k[/tex]
Studying two different states, an initial state 1 and a final state 2, it is satisfied:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 1.75 atmT1= 50 °C= 323 K (being 0 C=273 K)P2= ?T2= 100 KReplacing:
[tex]\frac{1.75 atm}{323 K} =\frac{P2}{100 K}[/tex]
Solving:
[tex]P2= 100 k*\frac{1.75 atm}{323 K}[/tex]
P2= 0.54 atm
Its pressure will be 0.54 atm at 100 K.
If two half lives have passed since a scientist collected a 1.00- gram sample of a U-235, how much U-235 is left now?
answers for most finals chem test questions (10th)
Answer:
one quarter of the original amount, so 0.25 g
Explanation:
Answer:
C
Explanation:
You can prepare a buffer solution by combining equal moles of which pair of substances?
A. weak acid and its conjugate base
B. strong acid and a strong base
C. strong base and its conjugate acid
D. salt and a weak acid
Answer:
A. weak acid and its conjugate base
Explanation:
A buffer solution can be made with a weak acid and conjugate base or a weak base and conjugate acid.
This may help you:
https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Acids_and_Bases/Buffers/Introduction_to_Buffers
Can animals and plants adapt to climate changes?
Answer:
Yes but will take a very very long time for them to adapt most will die but as gemeration passes they will get used to it
El modelo atómico postulado por Shrodinger refiere la corteza atómica como una nube electrónica. Verdadero. Falso.
Answer:
Falso.
Explanation:
El modelo cuántico (no relativista) de Schrodinger, piensa a los electrones como ondas estacionarias, tal que la amplitud de dichas ondas decae muy rápidamente cuando se "alejaban" del radio atómico. (Es decir, habia poca probabilidad de que los electrones escaparan del radio atomico, y era por ello que se quedaban orbitando cerca del nucleo). Es decir, podríamos pensar en esto como una "nube de probabilidades" más que una nube electronica
La idea de nube electrónica realmente viene de modelos previos, como el de Rutherford o el de Bhor, los cuales eran modelos clásicos.
PLEASE HELP NEED ANSWER ASAP!!!!
Use 3 H2(g) + N2(g) <--> 2 NH3 (g) + 92.4 kJ
At equilibrium, if the hydrogen (H2) concentration is increased, the ammonia(NH3) concentration will
Select one:
a. decrease
b. shifts back and forth
c. increase
d. remain the same
Answer:
the correct answer is option A. decrease
Answer the following questions when 45mL sample of 0.175 M KOH is titrated with 0.200 M HI
Find the initial pH of the 0.175 M KOH solution.
Find the pH when 18 mL of 0.200 M HI have been added.
Find the pH when 63 mL of the 0.200 M HI have been added.
How many milliliters of 0.200 M HI must be added to reach the equivalence point?
What is the pH at the equivalence point?
Answer: Initial pH is 13.243
12.83
1.3
40ml
7
Explanation:
Just finished the test.
Which of the following is a property of carbon atoms?
They are chemically inert.
They have six valence electrons.
They readily give up two electrons
They are found in all living things.
They are found in all living things. Hence, option D is correct.
What is an atom?An atom is any particle of matter which contains at least one proton.
Carbon is stored in plants and trees. Plants take carbon dioxide from the atmosphere to make the building blocks of food during photosynthesis. Carbon is stored in the hydrosphere and dissolved in ocean water and lakes. Carbon is used by several organisms to produce shells.
Hence, option D is correct.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ5
Will give brainly NEED CHEM HELP
Answer:
X is hydrochloric acid solution, Z is sodium chloride solution and Y is sodium hydroxide solution.
Explanation:
I will try be as detailed as possible.
Litmus paper:
-Short summary: Bases will turn blue and red litmus papers to blue and acids will turn blue and red litmus papers to pink while the pink will remain pink.(Simple Mnemonic: You can say B from base turns blue litmus blue and the others are the opposite).
-Also, neutral solutions will have not cause any color change on litmus papers. This is because litmus papers have a color change in the presence of H+ from acids and Oh- from bases. So, blue litmus paper remains blue and red litmus paper remains pink.
-Hydrochloric acid solution is a strong monoprotic acid because it fully dissociates to produces H+ ions. Therefore, in the presence of blue and pink litmus papers it will turn the blue to pink and the pink will remain pink.
-Sodium chloride solution is a neutral solution because it dissociates to Na+ and Cl- which do not play a role in the color change.
-Sodium hydroxide solution is a strong monoprotic base hence it fully dissociates to produce OH- no wonder the high pH value.
pH value:
-Acids have a pH value is <7 while pH of neutral solutions is 7 and basic solutions is >7.
-So from this analogy we can say that hydrochloric acid solution is 2,sodium chloride solution is 7 and sodium hydroxide solution is 10.
Universal indicator:
-A universal indicator gives a more precise data as compared to litmus because it not only identifies the type of the solution (acidic, basic or neutral) it also tells us the strength of the solution by comparing the color of the solution when the universal indicator is added against the pH universal indicator scale.
-Unfortunately ,the colors are quite a lot and I cannot type all of them but you could search for 'pH universal indicator scale' to clearly see the whole thing.
-In the scale, you can see that after addition of the universal indicator, sodium chloride solution neutral solutions (pH7) will give a green color, hydrochloric acid solution (pH=2) which is a strong acidic solution will give a red color and sodium hydroxide solution (pH=10) which is a strong base will give a blue solution.
Reaction with Magnesium:
-I'd like to recommend also that you search for 'metal reactivity' so that you can be able to see the trend .
-A highly reactive metal can displace a low reactive metal but a low reactive metal cannot displace a high reactive metal under normal conditions.
-So, for sodium hydroxide and sodium chloride solutions with magnesium ,magnesium cannot displace sodium because sodium is one of the most reactive metals therefore there will be no change.
-For hydrochloric acid solution, the reaction will take place because Magnesium is more reactive than hydrogen thus can be able to displace hydrogen ions and form Magnesium chloride solution.
~I hope this will help. All the best:)
HELP! Calculate the pH of the following solutions:
a) [OH-] = 3.1x10^-8 M
pH = 7.51
pH = 3.18
pH = 8.00
pH = 6.49
pH = 3.10
b) [H3O+] = 5.2x10^-7 M
pH = 7.72
pH = 7.00
pH = 6.28
pH = 5.27
pH = 5.20
c) [OH-] = 5.9x10^-5 M
pH = 5.00
pH = 5.90
pH = 4.23
pH = 5.59
pH = 9.77
d) [OH-] = 5.9x10^-3 M
Answer:
Adding base causes the pH of a solution to increase
pH is a measure of the hydrogen ion concentration of a system. Solutions with a low pH possess a high concentration of hydrogen ions, while solutions with a high pH possess a low concentration of hydrogen ions. To increase the pH of a solution, base can be added to it. Base will release hydroxide ions (OH-) in the solution which will neutralize or reduce the H+ ions concentration in the solution. This way the pH is increased.
Explanation:
Please help, lots of points!
If you were working for a beverage company, which molarity would you recommend, and what directions for mixing would you create for the drink package? Support your claims using the data you collected.
The 1.0 M beverage solution which is mixed by stirring would be the best molarity based on the data collected.
What is a beverage?A beverage is a liquid other than water which is consumed by humans to provide the body with energy and nutrients as well as to quench thirst.
A good quality beverage is sweet, fluid and clear.
From the data in the table, the molarity that meets these criteria is 1.0 M with stirring.
Therefore, I would recommend the 1.0 M beverage solution which is mixed by stirring.
Learn more about beverages at: https://brainly.com/question/27739677
#SPJ1
Balance the chemical equation using the drop-down options.
CaC2 +
A H20 --->
Ca(OH)2
A C2H2 +
Answer:
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
Explanation:
CaC2 + A H20 ---> Ca(OH)2 + A C2H2
This is calcium carbide reacting with water to produce calcium hydroxide and ethyne commonly called acetylene.
Let's now balance the equation.
CaC2 + 2H20 ⇋Ca(OH)2 + C2H2
When the temperature of the water was 10°C the waterweed did not produce bubbles.
Suzi increased the temperature of the water in the water-bath to 20°C. The waterweed started to produce bubbles.
She waited two minutes before starting to count the bubbles.
Explain why she waited for two minutes before she started to count the bubbles.
Science
Explanation:
she could waited for the saturated vapour pressure to equal the prevailing atmospheric pressure
ergo boiling to take place seeing as she had gotten the first indication that boiling had started
Which reaction demonstrates bonds breaking?
PC13(g) → P (g) + 3Cl (g)
P(g) + 3 Cl(g)
PC13 (g)
A gas diffuses 1/6 times faster than hydrogen gas (H2).
What is the molar mass of the gas? (5 points)
a
59.95 g/mol
b
66.54 g/mol
c
68.68 g/mol
d
72.58 g/mol
Answer:
72.58 g/mol
Explanation:
mark me brainless if I am ✅
The relationship between the rate of diffusion and the molar mass is given by Graham's law. A gas diffusing 1/6 times faster than hydrogen will have a molar mass of 72.58 g/mol. Thus, option d is correct.
What is Graham's law?Graham's law states the inverse relationship between the rate of diffusion and the square root of the molar mass of the gas. It is given as,
Rate = 1 ÷ √M
The molar mass of the gas that diffuses 1/6 times faster than hydrogen is calculated as,
R₁ ÷ R₂ = √ (M₂ ÷ M₁)
Here,
The molar mass of hydrogen = M₁
The molar mass of unknown gas = M₂
Rate of diffusion of hydrogen gas = R₁
Rate of diffusion of unknown gas = R₂ = 1 / 6 R₁
Substituting values:
R₁ ÷ 1/6 R₁ = √M₂ ÷ 2
6 × 1.414
= 8.485
= 84.85 g/mol ≈ 72.58 g/mol
Therefore, option d. 72.58 g/mol is the molar mass of unkown gas.
Learn more about Graham's law here:
https://brainly.com/question/19589867
#SPJ5