what are causes of students to drop-out from university
Answer:
stress
Explanation:
people cn get stressed and not want to do work
what components of static electricity theory does Electrostatic Precipitator make use of
Answer:
Electrostatic smoke precipitators work by forcing dirty flue gas (the gas escaping from a smokestack) past two electrodes (electrical terminals), which take the form of metal wires, bars, or plates inside a pipe or smokestack
Explanation:
Photosynthesis reactions in green plants use carbon dioxide and water to produce glucose (C6H12O6) and oxygen. A plant has 88.0 g of carbon dioxide and 64.0 g of water available for photosynthesis
The given question is incomplete. The complete question is:
Photosynthesis reactions in green plants use carbon dioxide and water to produce glucose (C6H12O6) and oxygen. A plant has 88.0 g of carbon dioxide and 64.0 g of water available for photosynthesis. Determine the mass of glucose (C6H1206) produced
Answer: 60.0 g of glucose
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
a) moles of [tex]CO_2[/tex]
[tex]\text{Number of moles}=\frac{88.0g}{44g/mol}=2.0moles[/tex]
b) moles of [tex]H_2O[/tex]
[tex]\text{Number of moles}=\frac{64.0g}{18g/mol}=3.5moles[/tex]
[tex]6CO_2+6H_2O\rightarrow C_{6}H_{12}O_6+6O_2[/tex]
According to stoichiometry :
6 moles of [tex]CO_2[/tex] require = 6 moles of [tex]H_2O[/tex]
Thus 2.0 moles of [tex]CO_2[/tex] require=[tex]\frac{6}{6}\times 2.0=2.0moles[/tex] of [tex]H_2O[/tex]
Thus [tex]CO_2[/tex] is the limiting reagent as it limits the formation of product.
As 6 moles of [tex]CO_2[/tex] give = 1 moles of glucose
Thus 2.0 moles of [tex]CO_2[/tex] give =[tex]\frac{1}{6}\times 2.0=0.33moles[/tex] of glucose
Mass of glucose = [tex]moles\times {\text {Molar mass}}=0.33moles\times 180g/mol=60g[/tex]
Thus 60.0 g of glucose will be produced from 88.0 g of carbon dioxide and 64.0 g of water
In green plants use carbon dioxide and water to produce glucose (C6H12O6) and oxygen. A plant has 88.0 g of carbon dioxide and 64.0 g of water available for photosynthesis produces 60.0 g of glucose.
To calculate the moles, we use the equation:
Number of moles Given mass Molar mass a) moles ofNumber of moles = (88.0g)/(44g / mol) = 2.0mol*epsilonb) moles of H2ONumber of les = (64.0g)/(18g / mol) = 3.5molesAccording to stoichiometry6 moles of re = 6mol of H2OWhat is mole fraction ?Mole fraction is a unit of concentration, described to be same to the range of moles of a element divided via way of means of the entire range of moles of a solution.
Thus it is well explained.
To learn more about the photosynthesis refer to link ;
https://brainly.com/question/19160081
someone help i will give branliest:)
Answer:
i think answer is B negative effects and benefits
HELP ANYONE THERE
At a research lab, a scientist carelessly pours cultures of living microbes down the drain. Which type of pollution is this?
Question 4 options:
toxic
sediment
nutrient
bacterial
A scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
What is bacterial pollution?Bacterial pollution refers to the uncontrolled proliferation of bacteria in the surrounding environment and ecosystems.
Bacterial pollution can be a subject of concern because bacteria may be pathogenic microorganisms.Bacterial pollution may cause serious harm to the public health and the well-being of a population.In conclusion, a scientist that carelessly pours cultures of living microbes down the drain represents a type of bacterial pollution.
Learn more in:
https://brainly.com/question/24704410
Glven 4.62 mol of sodium hydroxide, NaOH, how many grams are present?
According to the mole concept , there are 184.8 grams in 4.62 moles of sodium hydroxide.
What is a mole?Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.
It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.
It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass in grams present in one mole of atoms is its atomic mass.Number of moles is given as, mass/ molar mass
∴mass=number of moles×molar mass
On substitution, mass= 4.62×40=184.8 g
Thus, there are 184.8 g in 4.62 mole of sodium hydroxide.
Learn more about mole,here:
https://brainly.com/question/26416088
#SPJ2
Convert 25.6 L of a gas at STP to molecules
_BaS + _PtF2 → _BaF2 + _Pts
[tex]\huge\underline\mathbb\pink{ANSWER\::}\\\\[/tex]
_BaS + _PtF2 → _BaF2 + _Pts
Barium Sulfide + Platinum(II) Fluoride = Barium Fluoride + Platinum(II) Sulfide.
=> 1 BaS + 1 PtF2 → 1 BaF2 + 1 PtS
[tex]\\\\\\[/tex]
HOPE IT HELPS
PLEASE MARK ME BRAINLIEST☺️
Which contributes to the polarity of a water molecule?
Oa linear shape along with strong covalent bonds
O deflection of hydrogen atoms by lone pairs of electrons
O no difference in the electronegativity of oxygen and hydrogen
Ohydrogen bond formation between water molecules
Answer:
B
Explanation:
Answer:
B
Explanation:
Edge 2022
How many moles of gold atoms do 3.45x10^24 gold atoms constitute?
Answer:
3.45E24
Explanation:
calculator I'm not that great at math but I'm good at science but that isn't really science but it's aix between it tho
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m2 at 500C. Assume a diffusion coefficient of 1.0 108 m2 /s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained
This question is incomplete, the complete question is;
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500C.
Assume a diffusion coefficient of 1.0 × 10⁻⁸ m²/s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained
Answer:
the number of kilograms of hydrogen that pass per hour through is 2.592 × 10⁻³ kg
Explanation:
Given the data in the question;
thickness of sheet t = 5 mm
Area A = 0.20 m²
Temperature T = 500°C
diffusion coefficient ∝ = 1.0 × 10⁻⁸ m²/s
concentration high pressure side C[tex]_A[/tex] = 2.4
concentration low pressure side C[tex]_B[/tex] = 0.6 kg
from the question, we calculate the concentration gradient
dc/dx = (C[tex]_A[/tex] - C[tex]_B[/tex])/dt
so we substitute
dc/dx = (2.4 - 0.6) / ( - 5 × 10⁻³ )
dc/dx = -360
now, mass of hydrogen per hour that diffuse through a pd sheet
M = -∝AT(dc/dx)
where time t is 1 hour ( 3600 sec )
we substitute
M = -(1.0 × 10⁻⁸) × 0.20 × 3600 (-360)
M = 0.002592
M = 2.592 × 10⁻³ kg per one hour
Therefore, the number of kilograms of hydrogen that pass per hour through is 2.592 × 10⁻³ kg
The number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500°C is 2.592 × 10⁻³ kg.
Purification: It refers to the process of removing impurities or contaminants from a substance in order to make it cleaner, purer, or more refined. It also involves the elimination or reduction of unwanted substances or components that may be present in the original material.
According to the question, given data is:
Thickness of sheet t = 5 mm
Area A = 0.20 m²
Temperature T = 500°C
Diffusion coefficient ∝ = 1.0 × 10⁻⁸ m²/s
Concentration high pressure side [tex]C_A[/tex] = 2.4
Concentration low pressure side[tex]C_B[/tex]= 0.6 kg
from the question, we calculate the concentration gradient,
[tex]dc/dx = (C _A- C_B)/dt[/tex]
so, we substitute the values,
[tex]dc/dx[/tex] = (2.4 - 0.6)/ ( - 5 × 10⁻³)
[tex]dc/dx = -360[/tex]
Now, mass of hydrogen per hour that diffuse through a Palladium sheet,
M = -∝[tex]AT(dc/dx)[/tex]
where time t is 1 hour (3600 sec)
We substitute,
M = -(1.0 × 10⁻⁸) × 0.20 × 3600 (-360)
M = 0.002592
M = 2.592 × 10⁻³ kg per hour.
Therefore, the number of kilograms of hydrogen that pass per hour through a palladium sheet is approximately 2.592 × 10⁻³ kg.
Learn more about purification here:
https://brainly.com/question/31662552
#SPJ6
This question is incomplete, the complete question is;
The purification of hydrogen gas by diffusion through a palladium sheet was discussed in Section 5.3. Compute the number of kilograms of hydrogen that pass per hour through a 5-mm-thick sheet of palladium having an area of 0.20 m² at 500C.
Assume a diffusion coefficient of 1.0 × 10⁻⁸ m²/s, that the concentrations at the high- and low-pressure sides of the plate are 2.4 and 0.6 kg of hydrogen per cubic meter of palladium, and that steady-state conditions have been attained.
Calculate how many moles of NO2 form when each
quantity of reactant completely reacts.
2 N2O5(9) + 4NO2(g) + O2(9)
Part B
6.4 mol N205
Express your answer using two significant figures.
VALO
n =
Submit
Request Answer
Part C
16.2 g N205
Express your answer using three significant figurer
Answer:
partB: n=2N205
partc:17.20
The transfer of energy is called
work
power
kinetic energy
potential energy
Which of the following is the Brønsted-Lowry definition of an acid?
Answer:
A Brønsted-Lowry acid is any species that can donate a proton (H +) to another molecule. A Brønsted-Lowry base is any species that can accept a proton from another molecule. In short, a Brønsted-Lowry acid is a proton donor (PD), while a Brønsted-Lowry base is a proton acceptor (PA).
1. Which kingdom is made up of only autotrophs?
A. Protista
I
B. Animalia
C. Plantae
D. Phylum
Answer: I believe it's C
Hope this helped<3
Can you please make my answer brainly
In what part of the atom do alpha or beta particles originate?
Answer:
Nucleus
Explanation:
they originate in the nucleus
Beth heats a pot of water to cook pasta. What may happen as a result of adding heat
Answer:
the pasta will soften
Explanation:
the pasta will boil and will soften up as a result of it being regular pasta
#8 explain and answer
Answer:
B. The limiting reactant determines the maximum amount of product that can be formed.
Consider the addition of an electron to the following atoms from the fourth period. Rank the atoms in order from the most negative to the least negative electron affinity values based on their electron configurations. Atom or ion Electron configuration BrBr 1s22s22p63s23p64s23d104p51s22s22p63s23p64s23d104p5 GeGe 1s22s22p63s23p64s23d104p21s22s22p63s23p64s23d104p2 KrKr 1s22s22p63s23p64s23d104p61s22s22p63s23p64s23d104p6 Rank the electron affinity from most negative to least negative. To rank items as equivalent, overlap them. View Available Hint(s)
Answer:
Br>Ge>Kr
Explanation:
Electron affinity is the energy change that results from adding an electron to a gaseous atom(Khan Academy). It is also defined as "the amount of energy released when an electron is attached to a neutral atom or molecule in the gaseous state to form a negative ion" (Wikipedia).
Electron affinity increases from left to right in the periodic table. However, the noble gases possess a complete outermost electron shell.
Hence, electron affinity can be raked from the most negative to the least negative for the three atoms as follows; Br>Ge>Kr
8. A liquid boils when the vapor pressure of the liquid equals the atmospheric pressure on the surface
of the liquid. Using Reference Table H, determine the boiling point of water when the atmospheric
pressure is 90. kPa
Answer:
It is 98 degrees C.
Explanation:
Name the SI base units that are important in chemistry.
Units of the SI System
There are seven base units in the SI system:
the kilogram (kg), for mass
the second (s), for time
the kelvin (K), for temperature
the ampere (A), for electric current
the mole (mol), for the amount of a substance
the candela (cd), for luminous intensity
the meter (m), for distance
Ammonium chloride is produced in the thermochemical equation NH3 (g) + HCl (g) → NH4Cl (s) ΔH = –176 kJ.
How many moles of NH4Cl have been produced if the change in enthalpy is –528 kJ?
Answer:
3 moles of NH₄Cl
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
NH₃(g) + HCl(g) → NH₄Cl(s) ΔH = –176 kJ
From the balanced equation above,
1 mole of NH₄Cl where obtained when the change in enthalphy (ΔH) was –176 kJ.
Finally, we shall determine the number of mole of NH₄Cl produced when the change in enthalphy (ΔH) is –528 kJ. This can be obtained as follow:
From the balanced equation above,
1 mole of NH₄Cl where obtained when the change in enthalphy (ΔH) was –176 kJ.
Therefore, Xmol of NH₄Cl will be obtained when the change in enthalphy (ΔH) is –528 kJ i.e
Xmol of NH₄Cl = –528 / –176
Xmol of NH₄Cl = 3 moles
Thus, 3 moles of NH₄Cl where obtained from the reaction.
What is the correct name of the acid corresponding to the BrO3- oxoanion
Answer:
hello
Bromate is a bromine oxoanion and a monovalent inorganic anion. It is a conjugate base of a bromic acid.
Explanation:
thanks
what are the three components of a chemical formula?
Answer:
The three components of a chemical formula are the empirical formula, the molecular formula, and the structural formula.Hope this answer helps.
What is the buoyant force of a dog that displaces 10 pounds of water?
Answer:
pls answer this link for the answer :D
Explanation:
https://brainly.com/question/22200936
A(n) ____________ is a push or a pull.
newton
acceleration
force
momentum
Based on Table F, which compound is least soluble in water?
1. AIPO4
2. Li2SO4
3. Ca(OH)2
4. AgC₂H₂O2
Based on Table F, the chemical compound which is least soluble in water is: 1. [tex]AlPO_4[/tex].
What is solubility?Solubility can be defined as a terminology that describes how readily a chemical substance or compound can be dissolved in a solvent to form a solution.
In Chemistry, a chemical substance or compound is said to be soluble if it dissolves completely in a solvent such as water.
Based on Table F, the chemical compound which is least soluble in water is [tex]AlPO_4[/tex] because phosphates are generally insoluble.
Read more on solubility here: https://brainly.com/question/23946616
explanation and answer and you’ll get brain list
Answer:
Option B.
Explanation:
2Pb(NO₃)₂ → 2PbO + 4NO₂ + O₂First we convert 9.90 g of Pb(NO₃)₂ into moles, using its molar mass:
9.90 g ÷ 331.2 g/mol = 0.0299 mol Pb(NO₃)₂Then we convert moles of Pb(NO₃)₂ into moles of PbO, using the stoichiometric coefficients:
0.0299 mol Pb(NO₃)₂ * [tex]\frac{2molPbO}{2molPb(NO_3)_2}[/tex] = 0.0299 mol PbONow we convert 0.0299 mol PbO into grams, using its molar mass:
0.0299 mol PbO * 223.2 g/mol = 6.67 g PbOSo 6.67 g is the theoretical yield. With that in mind we calculate the percent yield:
% yield = 5.51 / 6.67 * 100 % = 82.6%So the correct answer is option B.
How many grams are in 8.3 moles of CaCl2?
Answer:
(8.3×40)+(8.3×71)
921.3grames
Answer:
[tex]\Large \boxed{\sf 921.3 \ g}[/tex]
Explanation:
Use formula
[tex]\displaystyle moles=\frac{mass}{M_r}[/tex]
[tex]M_r=40+35.5 \times 2 = 111[/tex]
Solve for mass
[tex]mass=8.3 \times 111=921.3[/tex]
Question #37.P.2A.2
Which statement about the periodic table is true?
a. Elements in the same column share similar properties.
b. Elements in the same row share similar properties.
c. Elements on the left have a larger nucleus than elements on the right.
d. Elements at the top of each column have the highest atomic mass in that column.