Each person in a room is assumed to be producing carbon dioxide at the average rate of 0.0107 cfm (5.0 ml/s) and air with a CO2 concentration of 280 ppm is being supplied to the room at the rate of 6000 cfm (2.8 m3/s). It is desired to keep the concentration level of CO2 in the space below 1000 ppm. Assuming complete mixing, determine how many persons could occupy the room and not exceed the desired CO2 level.

Answer:

11 electrons

Explanation:

The number of electrons is the same as the number of protona in a ATOM.

They will most likely be different in a ion, simple bond or a convalent bond.

Answer:we see 1 side because the other side is not visible

Explanation:

Answer:

2M

Explanation:

M=mol/L

1. Find moles of CoCl2

mass of substance/molar mass = 130/129.833 = 1.001 mol

3. Substitute in molarity equation

M=(1.001/0.5)

M= around 2M

The molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M

HOW TO CALCULATE MOLARITY:

Therefore, the molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M.

Learn more at: https://brainly.com/question/15948514?referrer=searchResults

The correct answer is option A; Mesosphere

The mesosphere is defined as the part atmosphere found above the stratosphere but below the thermosphere.

In this layer of the atmosphere, temperature decreases with height. It covers about 50 to 85 km above the earth.

Mesosphere is the only layer of the atmosphere that was correctly spelt among the options.

Learn more: https://brainly.com/question/12117482

Answer:

1 K3PO4 +3 HCI -->3 KCI +1 H3PO4

Explanation:

K3PO4- 1

Answer:

true

Explanation:

Answer:

the water molecules have more energy and are moving faster than the molecules of cold water. This makes it easier for the dye to get mixed throughout the hot water.

Explanation:

Answer:

Because particles moves more by kinetic energy and diffusion will spread with the particles

Explanation:

Hello,

During telophase, the cell, each pole of which inherits the same number of single  chromosomes, begins to divide into 2: this is  cytodieresis.

Answer:

Thermal energy comes from heat sources that provide energy from it's temp.

Explanation:

Produced when a rise in temperature causes atoms and molecules to move faster and collide with each other. The energy that comes from the temperature of the heated substance is called thermal energy. 6 min, 47 sec Heat Energy.

(If this doesn't help let me know in the comments, I'll try to explain better :> )

Answer:

True

Explanation:

because its the law of conservation of mass

Answer:

23.92 g

Explanation:

Molar mass of H2SO4 = (2×1)+32+(16×4)= 2+32+48= 82g/mol

H2SO4 + 2NaOH ---> Na2SO4 + 2H2O

I mole of H2SO4 = 2 moles of NaOH

24.5/82 = 24.5/82 × 2

= 0.598 moles of NaOH will neutralize

Mass= mole× molar mass

Molar mass of NaOH= 23+16+1 = 40g/mol

Mass= 0.598 × 40 = 23.92g of NaOH

Answer:

20g

Explanation:

First of all, you have got your formula wrong. It should be [tex]H_{2}SO_{4} + 2NaOH = Na_{2}SO_{4} + 2H_{2}O[/tex].

Start by finding the Relative Formula Mass for sulfuric acid. [tex]H_{2}SO_{4}[/tex] is equal to (2x1)+32+(16x4)=98. You then calculate Mols by doing [tex]Mols=\frac{Mass}{Relative Formula Mass}[/tex]. So, [tex]\frac{24.5}{98} = 0.25[/tex], so the Mols of Sulfuric Acid is 0.25.

The Mol ratio of Sulfuric Acid to Sodium Hydroxide is 1:2, so 0.25:0.5.

Now, you have to find the Relative Formula Mass of Sodium Hydroxide, or [tex]NaOH[/tex]. 23+16+1=40. Finally, multiply 0.5 by 40, and you'll find that the maximum mass is 20g.

Answer:

13 branches/tree

Explanation:

Step 1: Given data

Step 2: Calculate the total number of branches (b)

We will use the following expression.

b = l × b/l

b = 19565 leaves × 1 branch/35 leaves = 559 branch

Step 3: Calculate the number of branches per tree (b/t)

We will divide the total number of branches by the total number of trees.

559 branches/43 trees = 13 branches/tree

Answer:

2 NH3(g) + 3 O2(g) + 2 CH4(g) = 2 HCN(aq) + 6 H2O(l)

Explanation:

Reaction stoichiometry Limiting reagent

Compound Coefficient Molar Mass Moles Weight

NH3(g) 2 17.03052  

O2(g) 3 31.9988  

CH4(g) 2 16.04246  

HCN(aq) 2 27.02534  

H2O(l) 6 18.01528

Instructions on balancing chemical equations:

Enter an equation of a chemical reaction and click 'Balance'. The answer will appear below

Always use the upper case for the first character in the element name and the lower case for the second character. Examples: Fe, Au, Co, Br, C, O, N, F.     Compare: Co - cobalt and CO - carbon monoxide

To enter an electron into a chemical equation use {-} or e

To enter an ion specify charge after the compound in curly brackets: {+3} or {3+} or {3}.

Example: Fe{3+} + I{-} = Fe{2+} + I2

Substitute immutable groups in chemical compounds to avoid ambiguity.

For instance equation C6H5C2H5 + O2 = C6H5OH + CO2 + H2O will not be balanced,

but PhC2H5 + O2 = PhOH + CO2 + H2O will

Compound states [like (s) (aq) or (g)] are not required.

If you do not know what products are enter reagents only and click 'Balance'. In many cases a complete equation will be suggested.

Reaction stoichiometry could be computed for a balanced equation. Enter either the number of moles or weight for one of the compounds to compute the rest.

Limiting reagent can be computed for a balanced equation by entering the number of moles or weight for all reagents.

The given chemical equation is already balanced and does not require any further balancing.

The chemical equation NH₃(g) + O₂(g) + CH₄(g) → HCN(aq) + H₂O(l) is already balanced because the number of atoms of each element is the same on both sides of the equation.

On the left side of the equation, there is 1 nitrogen (N) atom in NH₃ and 1 nitrogen (N) atom in HCN.

On the right side of the equation, there are 3 hydrogen (H) atoms in NH₃, 2 hydrogen (H) atoms in HCN, and 2 hydrogen (H) atoms in H₂O.

There are 3 oxygen (O) atoms in O₂ on the left side of the equation and 1 oxygen (O) atom in H₂O on the right side of the equation.

Finally, there is 1 carbon (C) atom in CH₄ on the left side of the equation.

Since the number of atoms of each element is balanced on both sides of the equation, we can conclude that the given equation is already balanced and does not require any further adjustments or coefficients.

To learn more about balanced equation, here

https://brainly.com/question/31242898

#SPJ2

The complete question is:

How can I balance NH₃(g) + O₂ (g) + CH₄ (g) -> HCN (aq) + H₂O (l)?

Answer:

A compound

Explanation:

Chemical compound can be regarded as any substance made up of identical molecules which consists atoms of two or more than two chemical elements. For example four hydrogen atoms bonds with a carbon atom to give methane molecule which is a compound. It should be noted that A compound is a new substance with unique chemical and physical properties formed when two or more elements are chemically bonded during a physical reaction.

Answer:

mass

Explanation:

Answer:

C Mass

Explanation:

mass wont change when a force is put upon it.

Answer:

750 mmHg

Explanation:

From the question given above, the following data were obtained:

Partial pressure of CO₂ (Pₐ) = 250 mmHg

Partial pressure of N₂ (P₆) = 375 mmHg

Partial pressure of He (P꜀) = 125 mmHg

Pressure of the mixture (Pₜ) =?

The pressure of the mixture of the gases can be obtained as follow:

Pₜ = Pₐ + P₆ + P꜀

Pₜ = 250 + 375 + 125

Pₜ = 750 mmHg

Therefore, the pressure of the mixture of the gases is 750 mmHg

Answer:

B. summer

Explanation:

The northern hemisphere experiences summer during the months of June, July, and August because it is tilted toward the sun and receives the most direct sunlight.

Answer:

78.12 L

Explanation:

Given that,

Initial volume, V₁ = 105 L

Initial temperature, T₁ = 20°C = 20+273 = 293 K

New temperature, T₂ = -55 °C = 218 K

We need to find the new volume of the balloon. The relation between the volume and the temperature is given by :

[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]

Where

V₂ is the new volume

[tex]V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{105\times 218}{293}\\\\V_2=78.12\ L[/tex]

So, the new volume is 78.12 L.

Answer:

hello can you follow me

Explanation:

used in fire extinction, blasting rubber, foaming rubber and plastic

Answer:

114.23g

Explanation:

Mass = xg

Mole = 0.334 mol

Molar mass of Sucrose

(C = 12, H = 1, O = 16)

C12H22O11

(12×12)+(1×22)+(16×11)

144 + 22 + 176

342g/mol

Mass = No of mole × Molar mass

Mass = 0.334 × 342

Mass = 114.228

Mass ≈ 114.23g

it can occur 5 atoms

Explanation:

that is base on my study

Answer:  [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.

[tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.

Explanation:

Ionization isomerism occur when a ligand that is bound to the metal center exchanges places with an anion or neutral molecule that was originally outside the coordination complex

Thus [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.

Linkage isomerism is the existence of coordination compounds that have the same composition differing with the connectivity of the metal to a ligand.

Thus [tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.

Answer:

[tex]v = s \div t[/tex]

[tex]t = s \div v[/tex]

[tex]t = 300 \div 1500 = 0.2s[/tex]

Answer:

1072 torr

Explanation:

To answer this problem we can use Gay-Lussac's law, which states:

Now we convert the given temperatures into K:

We input the data:

And solve for P₂:

Answer:

pH value of HCL = 2.69897

Explanation:

Given:

Concentration of HCL = 0.002 M

Find:

pH value of HCL

Computation:

pH value of HCL = - log(Concentration of HCL)

pH value of HCL = - log(0.002)

pH value of HCL = 2.69897

Answer: A. 3.28 g of HCl

B. 6.30 g of [tex]HNO_3[/tex]

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} NaOH=\frac{3.65g}{40g/mol}=0.09moles[/tex]

[tex]\text{Moles of} Ca(OH)_2=\frac{3.65g}{74g/mol}=0.05moles[/tex]

a) [tex]HCl(aq)+NaOH(aq)\rightarrow H_2O(l)+NaCl(aq)[/tex]  

According to stoichiometry :

1 mole of [tex]NaOH[/tex] require = 1 mole of [tex]HCl[/tex]

Thus 0.09 moles of [tex]NaOH[/tex] will require=[tex]\frac{1}{1}\times 0.09=0.09moles[/tex]  of [tex]HCl[/tex]

Mass of [tex]HCl=moles\times {\text {Molar mass}}=0.09moles\times 36.5g/mol=3.28g[/tex]

b) [tex]2HNO_3(aq)+Ca(OH)_2(aq)\rightarrow 2H_2O(l)+Ca(NO_3)_2(aq)[/tex]  

According to stoichiometry :

1 mole of [tex]Ca(OH)_2[/tex] require = 2 moles of [tex]HNO_3[/tex]

Thus 0.05 moles of [tex]Ca(OH)_2[/tex] will require=[tex]\frac{2}{1}\times 0.05=0.1moles[/tex]  of [tex]HNO_3[/tex]

Mass of [tex]HNO_3=moles\times {\text {Molar mass}}=0.1moles\times 63g/mol=6.3g[/tex]

Answer:

.4 moles

Explanation:

this is if it's 35 grams

B. cryolite substance produces sulfur dioxide when roasted in air.

Cryolite (Na3AlF6, sodium hexafluoroaluminate) is an uncommon mineral identified with the once-large deposit at Ivittuut on the west coast of Greenland, mined commercially until 1987.

Sulfur dioxide (SO2) is a gaseous air pollutant composed of sulfur and oxygen. SO2 forms when sulfur-containing fuel such as coal, oil, or diesel is burned. Sulfur dioxide also converts in the atmosphere to sulfates, a major part of fine particle pollution in the eastern U.S.

Sulfur dioxide (SO2), a colorless, bad-smelling, toxic gas, is part of a larger group of chemicals referred to as sulfur oxides (SOx). These gases, especially SO2, are emitted by the burning of fossil fuels — coal, oil, and diesel — or other materials that contain sulfur.

Although its chief uses are in the preparation of sulfuric acid, sulfur trioxide, and sulfites, sulfur dioxide also is used as a disinfectant, a refrigerant, a reducing agent, a bleach, and a food preservative, especially in dried fruits.

To learn more about Sulfur dioxide, refer

https://brainly.com/question/803589

#SPJ2