Convert 30 ft /s to m/s. Round to the nearest hundredth.

Answer:

a ≈ 2.2

Step-by-step explanation:

Using the Cosine rule in Δ ABC

a² = b² + c² - 2bc cos A

Here b = 3, c = 4 and A = 32° , thus

a² = 3² + 4² - (2 × 3 × 4 × cos32° )

    = 9 + 16 - 24cos32°

    = 25 - 24cos32° ( take the square root of both sides )

a = [tex]\sqrt{25-24cos32}[/tex] ≈ 2.2

Answer:

Step-by-step explanation:

Reciprocal trig functions are opposite or mirror of the normal trig functions. The normal trig functions are as follows:

Sine = opposite side/hypotenuse

Cosine = adjacent side/hypotenuse

Tangent = opposite side/adjacent side

The reciprocals of the above trig ratios would be

Cosecant = hypotenuse/opposite side

Secant = hypotenuse/adjacent side

Cotangent = adjacent side/opposite side

Therefore, looking at the given options, the trigonometric function that can be described as a reciprocal trig function is

D. sec(0)

Step-by-step explanation:

(-3x-2/x) multiply by (-15x+12/x)

Answer:

Hey there!

There are a few ways you could solve this problem, but the easiest would to be writing an equation.

You could say-

2.3x=69

Divide by 2.3

x=30

Hope this helps :)

Answer:

30

Step-by-step explanation:

the answer is 30 bc increasing something by 130% is multiplying it by 2.3 so technically you have to divide 69 by 2.3 which equals to 30

Answer:

B

Step-by-step explanation:

The contractor gets $75 for every single customer she sets up. Okay, so if she sets up 1 customer, she gets $75, if she sets up 2, she gets $150 and so on.

This is a multiplication expression since multiplication is just repeated addition, which is what is happening in this case, where the contractor gets $75 added to her account every time she sets another person up.

At this point you can just eliminate the other answer options except for B, so it is B.

But to double check... if you multiply 75 by 8, you would get $600, which is B.

Answer:

d

Step-by-step explanation:

75/c; $9.78

Answer:

The amount of salt in the tank after t minutes is

y= 16e^(t/100)kg

Step- by-step Explanation

The tank contain 3000L of the brine

The rate is 30L/ min

The solution is mixed thoroughly, therefore, the rate in= rate out

dy/dt= rate in to the tank= rate out of the tank

CHECK THE ATTACHMENT FOR DETAILED EXPLANATION

[tex]L= (-2, 2, 8) \\

B= (-2, 1, 2, 4, 8) \\ L \: n \: B \: = \: ( - 2, 2, 8) \\ L \: u \: B = ( - 2, 2, 1, 4, 8)[/tex]

Answer:

Step-by-step explanation:

Let x represent the length of the side not parallel to the partition. Then the length of the side parallel to the partition is ...

  y = (300 -2x)/3

And the enclosed area is ...

  A = xy = x(300 -2x)/3 = (2/3)(x)(150 -x)

This is the equation of a parabola with x-intercepts at x=0 and x=150. The line of symmetry, hence the vertex, is located halfway between these values, at x=75.

The maximum area is enclosed when the dimensions are ...

  50 ft by 75 ft

That maximum area is 3750 square feet.

_____

Comment on the solution

The generic solution to problems of this sort is that half the fence (cost) is used in each of the orthogonal directions. Here, half the fence is 150 ft, so the long side measures 150'/2 = 75', and the short side measures 150'/3 = 50'. This remains true regardless of the number of partitions, and regardless if part or all of one side is missing (e.g. bounded by a barn or river).

Answer:  It will not create a perpendicular bisector.

Explanation:

If the compass is the same setting as the first arc and drawn from point B, the points of intersection of the arcs will pass through the midpoint of AB (thus creating a perpendicular bisector).

If you change the setting of the compass and draw an arc from point B, the points of intersection of the arcs will still create a perpendicular line but will not pass through the midpoint of AB (creating a perpendicular line but not a perpendicular bisector).

A perpendicular bisector divides a line segment into two equal segments.

If the compass setting is changed, the line will not be bisected.

To bisect a line, the positioning of the compass must be done as follows:

The above points are what is being done in the given construction.

Any step or setting other than that, would not create a perpendicular bisector.

Hence, if the compass setting is changed, the perpendicular bisector of the line would not be drawn.

Read more about perpendicular bisection at:

https://brainly.com/question/11050543

Answer:

29+/-2.26

= (26.74, 31.26) characters

Therefore the 95% confidence interval (a,b) = (26.74, 31.26) characters

Step-by-step explanation:

Confidence interval can be defined as a range of values so defined that there is a specified probability that the value of a parameter lies within it.

The confidence interval of a statistical data can be written as.

x+/-zr/√n

Given that;

Mean x = 29 characters

Standard deviation r = 6 characters

Number of samples n = 27

Confidence level = 95%

z value(at 95% confidence) = 1.96

Substituting the values we have;

29+/-1.96(6/√27)

29+/-1.96(1.154700538379)

29+/-2.263213055223

29+/-2.26

= (26.74, 31.26) characters

Therefore the 95% confidence interval (a,b) = (26.74, 31.26) characters

Answer:  [tex]H_0:\mu=421[/tex]

[tex]H_a : \mu\neq421[/tex]

Step-by-step explanation:

Given: A 37 bag sample had a mean of 421 grams.

Let [tex]\mu[/tex] be the population mean.

Then, the null hypothesis would be:

[tex]H_0:\mu=421[/tex]

whereas the alternative hypothesis would be:

[tex]H_a : \mu\neq421[/tex]

Answer:

The given the function F(x)=x^4-2x^3+3x^2-10x+3 and the factor (x-2). Hence, the value of x is 7.5.

Function is a type of relation, or rule, that maps one input to specific single output.

The given the function F(x)=x^4-2x^3+3x^2-10x+3 and the factor (x-2).

here x = 2

Substitute in the function;

F(x)=x^4-2x^3+3x^2 - ax+3

F(2) = 2^4-2(2)^3+3(2)^2 - a(2) +3

F(2) = 16 - 16 + 12 - 2a +3

F(2) = 15 - 2a

15 - 2a = 0

15 = 2a

a = 7.5

Hence, the value of x is 7.5

Learn more about function here:

https://brainly.com/question/2253924

#SPJ2

Answer:

B

Step-by-step explanation:

A is not a function because the same x value is repeated twice with different y values. The same goes for C and D so the answer is C.

Answer:

B.

Step-by-step explanation:

Well a relation is a set of points and a function is a relation where every x value corresponds to only 1 y value.

So lets see which x values in these relations have only 1 y value.

A. Well a isn’t a function because the number 3 which is a x value had two y values which are -1 and 4.

B. This relation is a function because there are no similar x values.

C. This is not a function because the x value 4 has two y values which are 4 and -3.

D. This is not a function because the number 1 has 2 and 3 as y values.

Answer:

a) variable = X

N = 15

Mean = 50.0933

SE Mean = 1.58

StDev = 6.11

Variance = 37.3321

Sum = 751.40

b) 95% Confidence interval = (46.997, 53.190) = (47.00, 53.19)

Step-by-step explanation:

variable = X

N = ?

Mean = ?

SE Mean = 1.58

StDev = 6.11

Variance = ?

Sum = 751.40

To fill in the missing quantities, we need to use some of their formulas.

For N, the number of variables

SE = Standard Error of the mean = σₓ = (σ/√N)

σₓ = Standard Error of the mean = 1.58

σ = standard deviation of the sample = 6.11

N = sample size = ?

1.58 = (6.11/√N)

√N = (6.11/1.58) = 3.8671

N = 3.8671² = 14.954374299 = 15 to the nearest whole number.

For the Mean

Mean = (Sum of variables)/(Number of variables)

Mean = ?

Sum of variables = 751.40

Number of variables = N = 15

Mean = (751.40/15) = 50.0933333333 = 50.093

For Variance

Variance = (Standard deviation)² = (6.11)² = 37.3321

b) To compute the confidence interval.

idence Interval for the population mean is basically an interval of range of values where the true population mean can be found with a certain level of confidence.

Mathematically,

Confidence Interval = (Sample mean) ± (Margin of error)

Sample Mean = 50.0933

Margin of Error is the width of the confidence interval about the mean.

It is given mathematically as,

Margin of Error = (Critical value) × (standard Error of the mean)

Critical value will be obtained using the z-distribution. This is because although, there is no information provided for the population standard deviation, the sample size is large enough for the sample properties to approximate the population properties.

To find the critical value from the z-tables,

z at 95% confidence level = 1.960 (from the z-distribution tables)

Standard error of the mean = σₓ = (σ/√N)

Already calculated to be 1.58

95% Confidence Interval = (Sample mean) ± [(Critical value) × (standard Error of the mean)]

CI = 50.0933 ± (1.960 × 1.58)

CI = 50.0933 ± 3.0968

95% CI = (46.9965, 53.1901)

95% Confidence interval = (46.997, 53.190) = (47.00, 53.19)

Hope this Helps!!!

Answer:

The 99​% confidence interval estimate of the mean body temperature of all healthy humans is between 98.53ºF and 98.87 ºF. 98.6ºF is part of the interval, so the sample suggests that the use of 98.6ºF as the mean body​ temperature is correct.

Step-by-step explanation:

We have the standard deviation for the sample, so we use the t-distribution to solve this question.

The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So

df = 104 - 1 = 103

99% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 103 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.99}{2} = 0.995[/tex]. So we have T = 2.624

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 2.624\frac{0.66}{\sqrt{104}} = 0.17[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 98.7 - 0.17 = 98.53ºF.

The upper end of the interval is the sample mean added to M. So it is 98.7 + 0.17 = 98.87 ºF.

The 99​% confidence interval estimate of the mean body temperature of all healthy humans is between 98.53ºF and 98.87 ºF. 98.6ºF is part of the interval, so the sample suggests that the use of 98.6ºF as the mean body​ temperature is correct.

Answer:

First box: 6

Second box: 10

Third box: 14

Step-by-step explanation:

The rule is to add the same number to each box. I tried adding different numbers, and I stopped at 4. 2 + 4 is 6, 6+4 is 10, 10+4 is 14, and 14+4 is 18. Therefore, you fill in the numbers accordingly.

Hope this helps!

~gloriouspurpose~

Answer:

see below

Step-by-step explanation:

Package A

2n + 3m = 280

Package B

2n + 5m = 320

Using elimination to eliminate n since the coefficient is the same

Subtracting the A equation from the B equation

2n + 5m = 320

-2n - 3m = -280

------------------------

    2m = 40

Divide by 2

2m/2 = 40/2

m = 20

Now finding n

2n+3m = 280

2n +3(20) = 280

2n+60 = 280

Subtract 60 from each side

2n +60-60= 280-60

2n = 220

Divide by 2

2n/2 = 220/2

n = 110

The cost per night is 110  and the cost per meal is 20

Answer:

c (62)

Step-by-step explanation:

Answer:

We can use the cross products property.

11/8 = y / 13

8y = 11 * 13

y = 11 * 13 / 8 = 17.875

Answer:

y=17.875

Step-by-step explanation:

[tex]\frac{11}{8} = \frac{y}{13}[/tex]

11(13)=8y

143=8y

y=17.875

Answer:

2.94% is the percentage of the company’s callers put on hold for at least 4.8 minutes

Step-by-step explanation:

First of all, what we need to find here is the z-score

Mathematically;

z-score = x-mean/SD

where mean = 3.1 , SD = 0.9 and x = 4.8

Plugging these values we have;

Z-score = (4.8-3.1)/0.9 = 1.89

So the required probability we want to calculate is;

P(z > 1.89) = 0.0294

So the proportion of callers put on hold for at least 4.8 minutes is 2.94%

Answer:

20 teachers

Step-by-step explanation:

Because if you take 100 and minus it by 29, 23, 4 and 24 you get 20.

Answer:

(a) The value of a is 53.35.

(b) The value of a is 38.17.

(c) The value of a is 26.95.

(d) The value of a is 25.63.

(e) The value of a is 12.06.

Step-by-step explanation:

The probability density function of X is:

[tex]f_{X}(x)=\frac{1}{55-22}=\frac{1}{33}[/tex]

Here, 22 < X < 55.

(a)

Compute the value of a as follows:

[tex]P(X\leq a)=\int\limits^{a}_{22} {\frac{1}{33}} \, dx \\\\0.95=\frac{1}{33}\cdot \int\limits^{a}_{22} {1} \, dx \\\\0.95\times 33=[x]^{a}_{22}\\\\31.35=a-22\\\\a=31.35+22\\\\a=53.35[/tex]

Thus, the value of a is 53.35.

(b)

Compute the value of a as follows:

[tex]P(X< a)=\int\limits^{a}_{22} {\frac{1}{33}} \, dx \\\\0.95=\frac{1}{33}\cdot \int\limits^{a}_{22} {1} \, dx \\\\0.49\times 33=[x]^{a}_{22}\\\\16.17=a-22\\\\a=16.17+22\\\\a=38.17[/tex]

Thus, the value of a is 38.17.

(c)

Compute the value of a as follows:

[tex]P(X\geq a)=\int\limits^{55}_{a} {\frac{1}{33}} \, dx \\\\0.85=\frac{1}{33}\cdot \int\limits^{55}_{a} {1} \, dx \\\\0.85\times 33=[x]^{55}_{a}\\\\28.05=55-a\\\\a=55-28.05\\\\a=26.95[/tex]

Thus, the value of a is 26.95.

(d)

Compute the value of a as follows:

[tex]P(X\geq a)=\int\limits^{55}_{a} {\frac{1}{33}} \, dx \\\\0.89=\frac{1}{33}\cdot \int\limits^{55}_{a} {1} \, dx \\\\0.89\times 33=[x]^{55}_{a}\\\\29.37=55-a\\\\a=55-29.37\\\\a=25.63[/tex]

Thus, the value of a is 25.63.

(e)

Compute the value of a as follows:

[tex]P(1.83\leq X\leq a)=\int\limits^{a}_{1.83} {\frac{1}{33}} \, dx \\\\0.31=\frac{1}{33}\cdot \int\limits^{a}_{1.83} {1} \, dx \\\\0.31\times 33=[x]^{a}_{1.83}\\\\10.23=a-1.83\\\\a=10.23+1.83\\\\a=12.06[/tex]

Thus, the value of a is 12.06.

Answer:

Step-by-step explanation:

Confidence intervals have been underutilized prior to this time.

The implications of not using confidence intervals include:

- The under-representation or over-representation of research results that amounts from the use of a single figure to represent a statistic.

- In Market Research analysis, neglecting the use of confidence intervals will increase the risk of your portfolio.

Implications/Importance of using confidence intervals include:

- Calculation of confidence interval gives additional information about the likely values of the statistic you are estimating.

- In the presentation and comprehension of results, confidence intervals give more accuracy from the data or metrics captured.

- Given a sample mean, confidence intervals show the likely range of values of the population mean.

Answer:

[tex]f(x)=4(x+6)^2-134[/tex]

Step-by-step explanation:

We are required to write the function[tex]f(x) = 4x^2 + 48x + 10[/tex] in vertex form.

First, bring the constant to the left-hand side.

[tex]f(x) -10= 4x^2 + 48x[/tex]

Factorize the right hand side.

[tex]f(x) -10= 4(x^2 + 12x)[/tex]

Take note of the factored term(4) and write it in the form below.

[tex]f(x) -10+4\Box= 4(x^2 + 12x+\Box)[/tex]

[tex]\Box = (\frac{\text{Coefficient of x}}{2} )^2\\\\\text{Coefficient of x}=12\\\\\Box = (\frac{12}{2} )^2 =6^2=36[/tex]

Substitute 36 for the boxes.

[tex]f(x) -10+4\boxed{36}= 4(x^2 + 12x+\boxed{36})[/tex]

[tex]f(x) -10+144= 4(x^2 + 12x+6^2)[/tex]

[tex]f(x) +134= 4(x+6)^2\\f(x)=4(x+6)^2-134[/tex]

The function written in vertex form is [tex]f(x)=4(x+6)^2-134[/tex]

Answer:

C

Step-by-step explanation:

I just finished the unit test on Edge. and got a 100% and I selected "c" as my answer.

Answer:

Mean: 40.17 years.

Standard deviation: 10.97 years.

Step-by-step explanation:

The frequency distribution is in the attached image.

We can calculate the mean adding the multiplication of midpoints of each class and frequency, and dividing by the sample size.

The midpoints of a class is calculated as the average of the bounds of the class.

Then, the mean can be written as:

[tex]E(X)=\dfrac{1}{N}\sum f_iX_i\\\\\\E(X)=\dfrac{1}{60}(3\cdot15+7\cdot25+18\cdot35+20\cdot45+12\cdot 55)=\dfrac{45+175+630+900+660}{60}\\\\\\E(X)=\dfrac{2,410}{60}=40.17[/tex]

The standard deviation can be calculated as:

[tex]s=\sqrt{\dfrac{1}{N-1}\sum f_i(X_i-E(X))^2}\\\\\\s=\sqrt{\dfrac{1}{59}[3(15-40.17)^2+7(25-40.17)^2+18(35-40.17)^2+20(45-40.17)^2+12(55-40.17)^2]}[/tex]

[tex]\\\\\\s=\sqrt{\dfrac{1}{59}( 1,900.59 + 1,610.90 + 481.12 + 466.58 + 2,639.15 )}\\\\\\s=\sqrt{\dfrac{ 7,098.33 }{59}}=\sqrt{120}=10.97[/tex]

The denominator( s ) we are given are [tex]x^2 + 4x + 4[/tex], and . The first thing we want to do is factor the expressions, to make this easier -

[tex]x^2 + 4x + 4[/tex]

This expression is a perfect square, as ( x )^2 = x^2, ( 2 )^2 = 4, 2 * ( x ) * ( 2 ) = 4x. Thus, the simplified expression should be the following -

[tex]( x + 2 )^2[/tex]

The other expression is, on the other hand, not a perfect square so we must break this expression into groups and attempt factorization -

[tex]x^2 + 5x + 6,\\\left(x^2+2x\right)+\left(3x+6\right),\\x\left(x+2\right)+3\left(x+2\right),\\\left(x+2\right)\left(x+3\right)\\\\Factored Expression = \left(x+2\right)\left(x+3\right)[/tex]

Combining ( x + 2 )^2 and ( x + 2 )( x + 3 ), the expression that contains factors of each is ( x + 2 )^2 * ( x + 3 ), or in other words the LCM.

Solution = [tex]\left(x+2\right)^2\left(x+3\right)[/tex]

Answer:

(2x-4i) (x+2i)

Step-by-step explanation:

2x^2+8

Factor out 2

2 ( x^2+4)

Writing as the difference of squares  a^2 -b^2 = (a-b) (a+b)

2 ( x^2 -(2i)^2)

2 ( x-2i) (x+2i)

Multiplying the 2 into the first term

(2x-4i) (x+2i)

Answer:

5.35 more miles

Answer:

5.35 miles to the finish line

Step-by-step explanation:

Step one

13.1-7.75=

5.35

Answer:

80202

Step-by-step explanation:

Simply add according to number value:

200 - 2 goes into hundreds place

2 - 2 goes into ones place

80000 - 8 goes into ten-thousands place