Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
sodium chloride

Answer:

froth flotation is a technique commonly used in the mining industry. In this technique, particles of interest are physically separated from a liquid phase as a result of differences in the ability of air bubbles to selectively adhere to the surface of the particles, based upon their hydrophobicity.

Explanation:

Froth floatation method is commonly used to concentrate sulphide ore such as galena (PbS), zinc blende (ZnS) etc. (ii) In this method, the metaalic ore particles which are perferentially wetted by oil can be separated from gangue. (iii) In this method, the crushed ore is suspended in water and mixed with frothing agent such as pine oil, eucalyptus oil etc. (iv) A small quantity of sodium ethyl xanthate which act as a collector is also added. (v) A froth is generated by blowing air through this mixture. (vi) The collector molecules attach to the ore particles and make them water repellent. (vii) As a result, ore parrticles, wetted by the oil, rise to the surface along with the froth. (viii) The froth is skimmed off and dried to recover the concentration ore. (ix) The gangue particles that are preferentially wetted by water settle at the bottom.

Answer:

60.86 g of PH₃

Explanation:

We'll begin by calculating the number of mole of H₂ that will occupy 60 L. This can be obtained as follow:

22.4 L = 1 mole of H₂

Therefore,

60 L = 60 / 22.4

60 L = 2.68 mole of H₂.

Next, we shall determine the number of mole of PH₃ produced by the reaction of 60 L (i.e 2.68 mole) of H₂. This can be obtained as follow:

P₄ + 6H₂ –> 4PH₃

From the balanced equation above,

6 moles of H₂ reacted to produce 4 moles of PH₃.

Therefore, 2.68 moles of H₂ will react to to produce = (2.68 × 4)/6 = 1.79 moles of PH₃.

Finally, we shall determine the mass of 1.79 moles of PH₃. This can be obtained as follow:

Mole of PH₃ = 1.79 moles

Molar mass of PH₃ = 31 + (3×1)

= 31 + 3 = 34 g/mol

Mass of PH₃ =?

Mass = mole × molar mass

Mass of PH₃ = 1.79 × 34

Mass of PH₃ = 60.86 g

Thus, 60.86 g of PH₃ were obtained from the reaction.

1. a) Igneous.

2. c) Metamorphic.

3. b) It broke into sediment and then compacted.

4. d) All types of rocks.

5. a) Wind and rain break down the rock into small pieces.

6. a) Yes, but it should be subtuced first.

7. c) Earth's interior.

8. c) Water.

9. b) Magma is molten rock within the Earth; lava is molten rock on the Earth's surface.

Explanation:

The general equation for an endothermic reaction is: Reactants + Energy → Products.

Hope it helps :)❤

The equation represents an endothermic reaction is reactants + energy

products.

Endothermic reactions are chemical reactions in which the reactants soak up warm strength from the surroundings to form products.

Learn more about the endothermic reaction here:-https://brainly.com/question/6506846

#SPJ2

Answer: radio wave frequencies have longer wavelengths and smaller

Energies per photon

Answer:

True

Explanation:

Answer:No, the Cell Membrane does I'm pretty sure

Explanation:

Divide the volume of water with mass of salt and multiply with 100 you'll get the concentration percentage

answer is B, because solution A's percentage is 10%

brainliest plz

Answer:

by adding heat

Explanation:

Adding heat can cause ice (a solid) to melt to form water (a liquid). Removing heat causes water (a liquid) to freeze to form ice (a solid).

by adding heat

when water was changes to soild or a gas , we say change to a different state of the matter. Even though the waters physical from change its molecular stay the same

Explanation:

this is the answer of your question .

hope it helped you

Answer:

215 moles

Explanation:

[tex]9.6mol CO_{2} (\frac{22.4 L CO_{2}}{1 mol CO_{2}} ) = 215 L CO_{2}[/tex]

One mole of a substance is equal to 6.022 × 10²³ units of that substance (such as atoms, molecules, or ions). The number 6.022 × 10²³ is known as Avogadro's number or Avogadro's constant. The concept of the mole can be used to convert between mass and number of particles.

Answer:

B

Explanation:

The solubility depends on the ksp. As the value of ksp increases the compound becomes more and more soluble.

In the options, the highest ksp value is 10^-10, thus that one is the most soluble.

Answer:

C. Hydrogen bonds​

Explanation:

Strongest intermolecular force

Hydrogen Bonding (H-Bonding)

Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.

Answer: C hydrogen bonds

Explanation:

Answer:

1 mole = 28.0101

Hence,

82.4 = around 2.8 mole

Have a great day <3

Answer:

Gill Slits

Explanation:

For the one who asked what hind limbs are they are back legs :)

Answer:

d

Explanation:

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer: I think it is hydroxide ion but im not sure

Explanation:

I hope this helped!

<!> Brainliest is appreciated! <!>

- Zack Slocum

*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆

Answer:

I think the dish contracts and shrinks

Answer:

The dish cracks or breaks.

Explanation:

When glass changes temperature rapidly, it may undergo thermal shock. This is stress that is produced by a sudden change in temperature.

Answer:

A). Lewis Acid

Explanation:

deez

The term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.

Lewis acid is a compound or ionic species which can accept an electron pair from a donor compound while a Lewis base is a compound such as the OH- ion, that can donate a pair of non-bonding electrons.

According to this question, a compound accepts electrons from another substance to form a covalent bond.

Therefore, the term that best describes the compound that accepts electrons from another substance to form a covalent bond is Lewis acid.

Learn more about Lewis acid at: https://brainly.com/question/15570523

#SPJ2

population is the number of species living in a given area if this is regarding biology or earth studies :)

Answer: first you have to calculate the amount ionized. We will say it is x mol / L

then % ionization = (amount ionized / initial concentration) * 100%

x can be calculated using an ice chart

HC3H5O2           -----> H+    + C3H5O2-

Initial HC3H5O2 = 0.250  

change              = -x

equilibrium         = 0.250 - x

initial H+            = 0

change              = +x

equilibrium         = x

C3H5O2- initial   = 0

change              = +x

equilibrium         = x

Ka         = [H=][C3H5O2-] / HC3H5O2]

 1.3 * 10 ^ -5    = [x][x] / (0.250 - x)  

So 1.3 * 10 ^ -5 * (0.250 - x)   = x ^ 2  

     3.25 * 10^ -6 - (1.3 * 10^-5)x = x^2   now this is a quadratic equation and you have to rearrange it and solve for x

x^2 + 1.3 * 10^-5)x - 3.25 * 10^ -6 = 0

use the equation x = {-b (+ or -)[b^2 - 4.a.c] ^ 1/2} / 2a

you should get x = 1.80 * 10 ^ -3 or x = -1.80* 10^-3

but x can not be negative..

so x = 1.80 * 10 ^ -3

so percent ionization = (1.80 * 10 ^ -3 / 0.250) * 100%

                               =0.72 %

the other way which is more easier is  

assuming that x is very small and therefore 0.250 - x is approximately equals to 0.250  

then 1.3 * 10^-5 = x^2 / 0.250

so x^2    = 1.3 * 10^-5 * 0.250

        x   = 1.80 * 10 ^-3

then percent ionization is = (1.80 * 10 ^ -3 / 0.250) * 100%

                               =0.72 %

if the percent ionization is > 5 % you can not do that approximation. in such a case you have to solve the quadratic equation. that is why I showed both methods.

now you can do the parts b and c

b answer : percent ionization = 1.27 %  

c answer : 2.54%

good luck

Answer:

P = protons

E = electrons

N = neutrons

remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells

Answer:

Explanation: A compound with the empirical formula SO has a molecular weight of 96.13

Answer:

When there is a conflict and if a friend responding to conflict with confrontation it may affect positively or negatively both ways depend how he responds or confront the other person he has a conflict with. But normally people alienate with the person being confrontational. A friend should try to resolve the conflict by making an amicable solution.

if it is used correctly it could help in making the relationship strong, however, confronting by attacking them verbally, insult them, or talking loudly among the group of people can escalate the conflict.

I will advise him to be cautious of the approach as it may positively or negatively affect the situation.

This is the process which involves directly engaging one another in the course of a dispute between them.

This method however could either resolve the conflict or worsen it which is why special approach should be taken by being calm and being respectful to the other party involved.

Read more about Confrontation here https://brainly.com/question/1004819

Answer:

Explanation:

The main assignment here is to provide the structure of A. But before that, let us explain briefly some certain things:

The proton NMR (1H) gives data about the quantity of non-identical protons present in the structure. The resonance frequency is seen regarding the standard compound (0 ppm), which is addressed as a chemical shift. The same protons have equal value of chemical shift.

The protons that are available in a similar environment are addressed as comparable protons and the protons with various conditions are called non-identical protons.

However, from the image below, we can see the reaction of the compound 1,3,5,7-cyclooctatetraene resulting in 2 equivalents of potassium forming an aromatic dianion.