Explanation:
Write what you know
F = ma
m = 30kg
a = 3
Plug and chug
fun fact:numbers that are exponents are called superscripts
Two arrows are shot vertically upward. The second arrow is shot after the first one, but while the first is still on its way up. the initial speeds are such that both arrows reach their maximum heights at the same instant, although these heights are different. Suppose the that initial speed of the first arrow is 34 m/s and that the second arrow is fired 0.204081632653061 seconds after the first. Determine the initial speed of the second arrow.
Answer:
The initial speed of the second arrow is 33.8 m/s.
Explanation:
initial speed of first arrow, u = 34 m/s
Let the initial height of the second arrow is h.
Let they both reaches at maximum height H.
Let the time taken by the first arrow is t and the second arrow is t - 0.0204
Let the initial speed of the second arrow is u'.
Use first equation of motion for the first arrow.
v = u - gt
0 = u - gt
34 = gt ..... (1)
For the second arrow
v =u' - g (t - 0.0204)
0 = u' - gt + 9.8 x 0.0204
u' = 34 - 0.1999 = 33.8 m/s
An alpha particle (charge 2e) is sent at high speed toward an atomic nucleus. The electric force acting on the alpha particle is 79.8 N when it is 2.29 x 10(-14) m away from the nucleus. What is the charge on the atomic nucleus? (e = 1.60 x 10(-19) C, Kc = 9 x 10(9) N•m(2)/c(2)
Answer:
1.45×10⁻¹⁶ C
Explanation:
Applying,
F = kqq'/r²................ Equation 1
Where F = force acting on the alpha particle, k = coulomb's constant, q = charge on the alpha particle, q' = charge on the atomic nucleus, r = distance of seperation between the alpha particle and the atomic nucleus.
make q' the subject of the equation
q' = Fr²/(kq)................. Equation 2
From the question,
Given: F = 79.8 N, r = 2.29×10⁻¹⁴ m, q = 2e = (2×1.6×10⁻¹⁹) = 3.2×10⁻¹⁹ C, k = 9×10⁹ Nm²/C²
Substitute these values into equation 2
q' = [79.8×(2.29×10⁻¹⁴)²]/(3.2×10⁻¹⁹×9×10⁹)
q' = (4.18×10⁻²⁶)/(2.88×10⁻¹⁰)
q' = 1.45×10⁻¹⁶ C
car moves a distance of 420 m. Each tire on the car has a diameter of 42 cm. Which shows how many revolutions each
tire makes as they move that distance?
Plzzzz help asap
Answer:
10 is the correct answer
Answer:
Total Distance: 420 meters
Diameter: 42 cm
Notice the units meters vs cm
420÷ 42 = 10 total revolutions
Which of the following best describes the formation of surf? Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break. As waves enter shallow water, the distance between wave crests (wave length) shortens, increasing the tendency to break.
Answer:
The question above would be written again but this time with options attached to it for comprehension sake:
Which of the following best describes the formation of surf?
A. Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break.
B. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break.
C. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break.
D. As waves enter shallow water, the distance between wave crests (wavelength) shortens, increasing the tendency to break.
The correct answer is option C (A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break).
Explanation:
Surf could mean crashing waves or breaking waves. Generally, the wave speed is constant in the same medium, however, the wave speed decreases as it enters shallow water which is largely due to the water depth which is relatively small, especially when it encounters the bottom of the shallow water. While the top of the wave overtakes the bottom of the wave, making sure the top of the wave continues at its previous speed.
pls answer my quetion i will give brainlist answer
Answer:
here's an explanation but not the answer
please kindly send No or Yes understand.
Explanation:
A 10-N force is applied to push a block across a friction free surface for a displacement of 5.0 m to the right.
See Answer
See Answer
A 10-N frictional force slows a moving block to a stop after a displacement of 5.0 m to the right.
A piston is resting halfway into a cylinder containing gas in thermal equilibrium. The layer of molecules next to the closed end of the cylinder is suddenly flash-heated to a very high temperature. Which best describes what happens next
Answer: hello the options related to your question is missing attached below are the missing options
answer : The molecules with the highest temperature will bounce off their neighbors, losing energy to them and so on until the system is at a new equilibrium with the piston moved out ( option B )
Explanation:
What best describes the situation of what will happen next as explained in the question is in Option B
Because molecules with higher temperatures will always posses higher kinetic energy and they will collide more frequently with surrounding molecules passing on their energy in the process until the energy gets to the molecules closest to the piston. The molecules closest to the piston will then hit the piston until a new equilibrium is achieved
Follow-up Questions
1.
How much stress do you think?
An object of mass m slides down an incline with angle 0.
Which expression
shows the net force on the object along the surface of the incline?
A. mg cos(0) - FN
B. mg cos(0)
C. mg sin(0)
D. mg sin(0) - FN
Answer:
C. mg sin(θ)
Explanation:
The plane is incline and the only force acting in the object is the gravity, so you multiply mg per sin(θ) because sin(θ) gave you the part of the gravity acting in the horizontal direction parallel with the inclined surface
The expression shows the net force on the object along the surface of the incline is mg sin(θ). The correct option is C.
What is Net force?When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.
An object of mass m slides down an incline with angle (θ).
The plane is incline and the only force acting in the object is the gravity, The weight or gravity acting in the horizontal direction parallel with the inclined surface is mg sin(θ).
Thus, the correct option is C.
Learn more about net force.
https://brainly.com/question/18031889
#SPJ2
Una lámpara requiere 5 A y presenta una resistencia de 20 Ω, cuando está
encendida.
a. ¿Cuál es la tensión?
b. ¿Qué resistencia adicional requiere si se desea operar a 120 V?
c. ¿Y 110 V?
Answer:
a. V = 100 voltios
b. Para 120 V → [tex]R_{2} = 4 \Omega[/tex]
c. Para 110 V → [tex]R_{2} = 2 \Omega[/tex]
Explanation:
a. La tensión se puede calcular mediante la ley de Ohm:
[tex] V = IR [/tex]
V: es el voltaje o tensión =?
I: es la corriente = 5 A
R: es la resistencia = 20 Ω
Entonces, la tensión es:
[tex]V = IR = 5 A*20 \Omega = 100 V[/tex]
b. La resistencia adicional es la siguiente:
[tex] R_{2} + R_{1} = \frac{V}{I} [/tex]
[tex]R_{2} = \frac{V}{I} - R_{1} = \frac{120 V}{5 A} - 20 \Omega = 4 \Omega[/tex]
c. La resistencia adicional para operar a 110 voltios es:
[tex]R_{2} = \frac{V}{I} - R_{1} = \frac{110 V}{5 A} - 20 \Omega = 2 \Omega[/tex]
Espero que te sea de utilidad!
A children's roller coaster is released from the top of a track. If its maximum speed at ground level is 3 m/s, find the height it was released from.
Answer:
h = 0.46 m
Explanation:
According to the law of conservation of energy:
Potential Energy Lost by Roller Coaster = Kinetic Energy Gained by Roller Coaster
[tex]mgh = \frac{1}{2}mv^2\\\\2gh = v^2\\\\h = \frac{v^2}{2g}[/tex]
where,
h = height = ?
v = speed at bottom = 3 m/s
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]h = \frac{(3\ m/s)^2}{(2)(9.81\ m/s^2)}[/tex]
h = 0.46 m
How many types of galaxies are there?
a. 3
b. 4
c. 5
d. 6
You have just learned that the planet core of Mars is no longer radiating heat like the core of Earth. With this information what would you communicate to building designers as the lead geologist in regards to suitable building locations on the surface of Mars? Remember your informing builders about locations that would best avoid natural disasters like marsquakes and volcanoes? What evidence or theories do you have to support your statements?
Answer:
Explanation:
That is a fun question!
Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.
Which of the following changes occurs during nuclear fission?
A. Energy is absorbed from the surroundings.
B. Atomic nuclei combine to form a larger nucleus.
C. Energy is converted into mass.
D.
The parent nucleus splits into lighter daughter elements.
Reset
Answer:
The parent nucleus splits into lighter daughter elements
Explanation:
Nuclear fission involves the splitting of nucleus of a lighter element with smaller particles
In which stage of a star's life cycle, does gravity and fusion become balanced, and an adult star forms?
A. Main-sequence
B. Red supergiant
C. Protostar
D. White dwarf
Answer:
im guessing red giant-
Determine the amount of work done by the applied force when a 87 N force is applied to move a 15 kg object a horizontal
distance of 4.5 meters at a constant speed.
Answer:
391.5 J
Explanation:
The amount of work done can be calculated using the formula:
W = F║d where the force is parallel to the displacementLooking at the formula, we can see that the mass of the object does not affect the work done on it.
Substitute the force applied and the displacement of the object into the equation.
W = (87 N)(4.5 m) W = 391.5 JThe amount of work done on the object is 391.5 J in order to move it 4.5 meters with an applied force of 87 Newtons.
Mass doesn't matter on amount of work done .We can calculate amount of work done through Force and Displacement
Force=87NDisplacement=4.5m[tex]\boxed{\sf W=Fd}[/tex]
W denotes to work doneF denotes to forced denotes to displacement[tex]\\ \sf\longmapsto Work\:Done=87(4.5)[/tex]
[tex]\\ \sf\longmapsto Work\:done=391.5J[/tex]
What are the si units
Answer:
The uniy which is accepted all over the world is called SI unit.
Explanation:
The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.
Which type of electromagnetic radiation is responsible for the colors of
objects?
O A. Radio waves
O B. X-rays
O C. Visible light
O D. Ultraviolet radiation
Answer:
C. Visible light
Explanation:
Visible light is responsible for the colors of objects.
Hope it will help :)❤
La resistividad de cierto alambre es 1.72x10 -8 Ωm a 20 oC .Una batería de 6v se conecta a una bobina de 20 m de este alambre, con un diámetro de 0.8 mm. ¿Cuál es la corriente en el alambre?
Answer:
i = 1.09 10⁴ A
Explanation:
For this exercise we will look for the resistance of the wire
R = ρ L / a
the area of the wire is
a =ππ r² = π πd² / 4
we substitute
R = ρ L 4 / π d²
R = 1.72 10⁻⁸ 20 4/π 8 10⁻⁴
R = 5.47 10⁻⁴ Ω
to calculate the current we use ohm's law
V = R i
i = V / R
i = 6 / 5.47 10⁻⁴
i = 1.09 10⁴ A
Iron meteorites are interpreted as deriving from the cooled metallic core of a largeish asteroid. This is based upon:
Answer:
This is based upon the fact that meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids
Explanation:
Iron meteorites are interpreted as deriving from the cooled metallic core of a larger asteroid , because meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids that are located outside the planet but found their way into our planet .
which way would 2 negatively charged balloons naturally move? what would that do to the amount of potential energy stored in the field?
Answer:
gsg
Explanation:
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
What is force of repulsion?The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.
In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
Find more on electrostatic repulsion:
https://brainly.com/question/24013868
#SPJ2
(give the answer or I'll report) please solve it with the steps
Answer:
The required elastic potential energy is 0.068J
Explanation:
Given,
Spring force constant, k= 3.4 N/M
Spring stretch length/ Displacement, x= 0.2m
We know,
Elastic potential energy, V= [tex]\frac{1}{2} kx^{2}[/tex]
=[tex]\frac{1}{2}*3.4*(0.2)^{2}[/tex]
=[tex]\frac{0.136}{2}[/tex]
=0.068
∴The required elastic potential energy is 0.068J
A 20 ohm and 60 ohm light bulb are put in series together which one would be brighter?
Answer:
The 60 Ohm bulb would be brighter than the 20 Ohm bulb.
Explanation:
Hi there!
Ohm's Law: [tex]V=IR[/tex] where V is voltage, I is current and R is resistance
Power equation: [tex]P=VR[/tex]
The greater the power of a bulb, the brighter it is.
The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:
[tex]P=I^2R[/tex]
Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.
I hope this helps!
Answer:
The 60 Ohm bulb would be brighter than the 20 Ohm bulb.
Explanation:
Hi there!
Ohm's Law: V=IRV=IR where V is voltage, I is current and R is resistance
Power equation: P=VRP=VR
The greater the power of a bulb, the brighter it is.
The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:
P=2RP=I
2
R
Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.
I hope this helps!
8× +5+9×+3 how can I solve this
Answer:
collect like terms then add=>8x+9x+5+3
=>8x+9x+5+3=>17x+8
the volume and the mass of substance are 15cm3 and 27 gm respectively find its density
Answer:
[tex]d=1.8\ g/cm^3[/tex]
Explanation:
Given that,
Mass, m = 27 grams
Volume of the substance, V = 15 cm³
We need to find the density of the substance. We know that, the density of an object is given by mass per unit volume. So,
[tex]d=\dfrac{m}{V}\\\\d=\dfrac{27}{15}\\\\d=1.8\ g/cm^3[/tex]
So, the density of the substance is equal to [tex]1.8\ g/cm^3[/tex].
what is the size of the electron charge?
Answer:
It’s like medium uk
Explanation:
The size of electron charge is estimated to be 1.6 × 10-¹⁹
What is the magnification when an object is placed at 2f from the pole of the convex mirror?
-2/ 3
-3/2
-1
-1/3
Answer:
Linear magnification = 1/3
Explanation:
Given:
Convex mirror
Object's distance from pole = 2f
Find:
Linear magnification
Computation:
Object distance, u = −2f
So,
1/v + 1/u = 1/f
1/v + 1/(-2f) = 1/f
1/v = 1/f + 1/2f
BY taking LCM
1/v = 3 / 2f
v = 2f / 3
Magnification, M = -v / u
So,
Magnification, M = (2f / 3) / 2f
Magnification, M = 2f / 6f
Magnification, M = 2 / 6
Linear magnification = 1/3
Light travels through space at a speed of 3.0 x 108 m/s. A space probe is
traveling toward Earth at 2.5 * 108 m/s when one of its spotlights is turned
on. What speed would an observer on Earth measure for the light from the
spotlight?
O A. 2.5 * 108 m/s
O B. 3.0 x 108 m/s
O c. 5.5 x 108 m/s
O D. 0.5 x 108 m/s
Explanation:
The answer is (B). The speed of light is the same for all observers regardless of their motion relative to the light source.
The speed would an observer on Earth measures for the light from the spotlight will be 3×10⁸ m/sec.
What is speed?Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.
The given data in the problem is;
The speed of light is, [tex]\rm C =3 \times 10^8\ m/sec[/tex]
All frames of reference have the same speed of light in a vacuum. Therefore the speed would an observer on Earth measures for the light from the spotlight will be 3×10⁸ m/sec.
Hence option B is correct.
To learn more about the speed refer to the link;
https://brainly.com/question/7359669
True or false
scientific research has now proven that atoms are composed of parts that are larger than protons neutrons and electrons
Answer:
False
Explanation:
parts that are smaller than protons neutrons and electrons
A (200 g) of water at (80 °C) is mixed with (100 g)of water at (20 °C). What is the final temperature of the water?
Answer:
60 °C
Explanation:
From the question given above, the following data were obtained:
Mass of 1st sample (M₁) = 200 g
Temperature of 1st sample (T₁) = 80 °C
Mass of 2nd sample (M₂) = 100 g
Temperature of 2nd sample (T₂) = 20 °C
Equilibrium temperature (Tₑ) =?
NOTE: Since the sample are the same, the specific heat capacity is constant.
We can obtain the equilibrium temperature as follow:
Heat lost by 1st = heat gained by the 2nd
M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)
Cancel out C
M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)
200 (80 – Tₑ) = 100 (Tₑ – 20)
Clear bracket
16000 – 200Tₑ = 100Tₑ – 2000
Collect like terms
16000 + 2000 = 100Tₑ + 200Tₑ
18000 = 300Tₑ
Divide both side by 300
Tₑ = 18000 / 300
Tₑ = 60 °C
Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.
A train traveled 100 kilometers north in 2 hours. After exchanging some railroad cars, it traveled 100 kilometers south in 2 hours along the same track. Why has the train's velocity changed
Answer:Due to change in direction
Explanation:
Given
Initially train has traveled a 100 km in North and after exchanging some railroad cars, it traveled 100 in south.
The velocity of the train changes as it direction of motion changes. Velocity is the vector quantity which require direction and magnitude for its reperesentation.