A toboggan with two riders has a total mass of 87.0 kg. A third person is pushing the toboggan with a force of 42.5 N at the top of a hill with an angle of 16°. The force of friction on the toboggan is 36.0 N. Which statement describes an accurate free-body diagram to represent the situation? (Choose one of the forces acting on the system with correct magnitude and direction.)

Answer:

C-0.55 m/s to the right

Explanation:

edg

Answer:

0.55 to the right

Explanation:

Answer:

The correct answer is option D.

Explanation:

With an increase in temperature, the particles increase kinetic energy and move quicker. The normal speed of the particles relies upon their mass just as the temperature – heavier particles move more gradually than lighter ones at a similar temperature.

The temperature increase in this system since the average kinetic energy of the particles increases and particles move quickly. And after some time the temperature of the system is lower now than it was initially.

Thus, the correct answer is option D.

The impact of the change in motion should be option D.

In the case when there is an increase in temperature, the particles should increase kinetic energy and move faster. The normal speed of the particles believes their mass is like the temperature. The temperature rises in this system because the average kinetic energy of the particles should rised and particles move faster.

Learn more about energy here: https://brainly.com/question/6034042

Answer:

The answer is Revising

Answer:

D

Explanation:

Revising

Explanation:

Given the conditions A,B and C when the pendulum is released, at point A the initial velocity of the pendulum is zero(0), the potential energy stored is maximum(P.E= max),

the conditions can be summarized bellow

point A

initial velocity= 0

final velocity=0

P.E= Max

K.E= 0

point B

initial velocity= maximum

final velocity=maximum

P.E=K.E

point C

initial velocity= min

final velocity=min

P.E= 0

K.E= max

Answer:

d. Both kinetic and sliding friction

Explanation:

Kinetic friction, commonly known as sliding friction, happens when a body with its surfaces in contact is in relative motion with another. It's the frictional force slowing it down, and finally stopping a moving body. One can describe sliding friction as the resistance any two objects create while sliding against each other. It is often documented as the force required to hold a surface moving along another surface. It is determined by two variables- one is material of the object and another is its weight.

Answer:

The black lines represent the energy absorbed by the electrons.

Explanation:

Atoms emit lights when they are excited. These lights are of particular wavelengths that match with different colors. A series of colored lines appear along with spaces in the middle of the two colors. The middle of the colors is filled with dark spaces. Each spectral line of an element represents a specific characteristic of the element. These colored lines appearing in the form of series are termed to be the atomic spectrum of the element. Identification of the elements is done through the line of the spectrum they possess.

Answer:

(B) The black lines represent the energy absorbed by the electrons.

Explanation:

Answer:

The wavelength is approximately 611 nm

Explanation:

We can use the formula for the condition of maximum of interference given by:

[tex]d\,sin(\theta)=m\,\lambda\\(0.000250\,\,m)\,\,sin(1.12^o)=8\,\lambda\\\lambda=\frac{1}{8} \,(0.000250\,\,m)\,\,sin(1.12^o)\\\lambda \approx 610.8\,\,nm[/tex]

We can also use the formula for the distance from the central maximum to the 5th minimum by first finding the tangent of the angle to that fifth minimum:

[tex]tan(\theta)=\frac{y}{D}\\ tan(\theta)=\frac{0.0333}{3.02} =0.011026[/tex]

and now using it in the general formula for minimum:

[tex]d\,sin(\theta)\approx d\,tan(\theta)=(m-\frac{1}{2} )\,\lambda\\\lambda\approx 0.00025\,(0.011026)/(4.5)\,\,m\\\lambda\approx 612.55\,\,nm[/tex]

Answer:

The correct answer is  [tex]6.1\times10^{-7}\:m[/tex]

Explanation:

The distance from the central maxima to 5th minimum is:

[tex]x_{5n}-x_{0} =3.33\:cm=0.033\:m[/tex]

The distance between the slits and the screen:

[tex]L = 302\:cm = 3.02\:m[/tex]

Distance between 2 slits: [tex]d = 0.00025\:m[/tex]

[tex](n-\frac{1}{2})\lambda=\frac{d(x_n)}{L}[/tex]

For fifth minima, n = 5... so we have:

[tex]x_{5n}=\frac{9\lambda L}{2d}[/tex]

For central maxima, n = 0... so we have:

[tex]x_{0}=\frac{n\lambda L}{d}=0[/tex]

So the distance from central maxima to 5th minimum is:

[tex]\frac{9\lambda \:L}{2d}-0=0.033[/tex]   (Putting the values, we get):

[tex]\Rightarrow \lambda = 6.1\times 10^{-7}\:m[/tex]

Best Regards!

Answer:1.81

(a) Explanation:the turn ratio= input voltage÷output voltage.

400÷220=1.81.

Don't know how to solve b part...

Answer:

110 mL

Explanation:

Ideal gas law:

PV = nRT

Assuming the container isn't rigid, and the pressure is constant, then:

V/T = V/T

Plug in values (remember to use absolute temperature).

V / 293 K = 150 mL / 393 K

V = 110 mL

As waves travel into the denser medium, they slow down and wavelength decreases.

Explanation:

The denser the medium the slower the waves (speed of light) travels.

◦•●◉✿When the body approaches the speed of light, the body's length appears to contract in the direction of travel, and its mass appears to increase from the point of view of a stationary observer. Only photons move to light velocity. They don´t have length.✿◉●•◦

Answer:

circular motion

Explanation:

As a motorcycle takes a sharp turn, the type of motion that occurs is called circular motion.

Circular motion is a movement of an object along a circular path. As this motorcycle makes the sharp turn, it is acted upon by a centripetal force which directs the motorcycle towards the center.

Therefore, circular motion is the correct answer to the question.

Answer:

Circular Motion

Answer:

Time, t = 3.2 ms

Explanation:

It is given that,

Mass of basketball, m = 0.622 kg

Initial velocity, u = 4.23 m/s

Final velocity, v = 3.85 m/s

Average force acting on the ball, F = 72.9 N

We need to find the time of contact of the ball with the floor. Let t is the time of contact. So,

[tex]F=ma\\\\F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{0.622\times (3.85-4.23)}{72.9}\\\\t=0.0032\ s\\\\\text{or}\\\\t=3.2\ ms[/tex]

So, the ball is in contact with the floor for 3.2 ms.

Answer:

1. it helps to change the direction.

2. it helps us to walk on ground.

3. it helps the vechils to break while moving.

4. helps in changing one form of enegry to another form. eg when we rub our hands we feel heat energy.

5. it opposites the force.

6. it helps us to change shape of objects.eg we roll the dough to make it roti.

7. it changes the state of body from rest motion.eg when we push any obj from inclined plane it moves.

i all know is just 7..

Answer:

It is always less than 1 because the load arm is always longer than effort arm.

Explanation:

In the formula, MA= effort divided by load which makes it less than 1.

This helps by reducing the applied force(effort). It is a speed multiplier.

 Hope it helps.

Answer:

1.6 kJ

Explanation:

0.40 (4 kJ) = 1.6 kJ

Answer:

C

Explanation:

I would have said B but air pressure acts at ALL angles(directions). C makes sense because the increase in the temperature would cause the molecules to bounce off the walls of the balloon and each other which exerts pressure.

Answer:

C c hagwguawnjaahwbhanwbhsqn2nusbwvwf

Answer: El momento final es 12 veces el momento inicial.

Explanation:

El momento es definido como la cantidad de movimiento, y la ecuación es:

P1 = m*V

donde m es masa y V es velocidad

Si este es el momento inicial de nuestro objeto, y ahora la masa se triplica y la velocidad se cuadriplica (en modulo) el nuevo momento es:

P2 = (3*m)*(4*V) = 3*4*m*V = 12*m*V

Entonces la razón entre los momentos es:

P2/P1 = 12m*V/(m*V) = 12

Answer:

4 km/hr

Explanation:

The computation of the actual velocity is shown below:

Because the path of its paddles is opposed to the current direction, the real velocity can be determined by deducting the current velocity to its velocity while paddling

So, the actual velocity is

= Upstream - downstream

= 19 km/hr - 15 km/hr

= 4 km/hr

As we can see it is in positive, so it is an upstream direction  

Answer:

since the direction of his paddles is opposite of the the direction of the current, so the actual velocity can be calculated by subtracting the velocity of current to to his velocity when paddling

v = 19 - 15

v = 4 since the answer is positive, then the direction is upstream

Explanation:

Answer:

The magnitude of the average force on the wall during the collision is 6 N.

Explanation:

Given;

mass of snowball, m = 120 g = 0.12 kg

velocity of the snowball, v = 7.5 m/s

duration of the collision between the snowball and the wall, t = 0.15 s

Magnitude of the average force can be calculated by applying Newton's second law of motion;

F = ma

where;

a is acceleration = v / t

a = 7.5 / 0.15

a = 50 m/s²

F = ma

F = 0.12 x 50

F = 6 N

Therefore, the magnitude of the average force on the wall during the collision is 6 N.

Answer:

MARK me brainliest please and follow my page

Explanation:

All you have to do to get the average speed is to calculate the total distance covered and divide it by the total time taken

= 16/18 = 0.88m/s

Average speed = (distance covered) / (time to cover the distance)

For the full 18 seconds described by the graph . . .

Average speed = (16 meters) / (18 seconds)

Average speed = (16 / 18) m/s

Average speed =  0.89 m/s

Answer:

E = 85170 J (/ 85.2 kJ)

Explanation:

Take the latent heat of fusion of water be 334J / g.

From the equation E = ml,

E = energy required (unknown),

mass m = 255g,

latent heat of fusion l = 334J / g,

E = 255 x 334

E = 85170 J (/ 85.2 kJ)

Answer:

Liquids

Explanation:

Liquids take up the shape of the container it is poured into but will never change its volume.

Answer:

E≅1.2×10^7 N/C

Explanation:

First off I'd like to say that I'm taking "net electric field" to mean that they don't want this answer to be put into vector component form and instead want magnitudes. Sometimes the wording of these questions throws me off, so sorry ahead of time if that's what they want from you!

Edit: I ended up adding it anyways ;P

Since we are observing the net electric field acting at q1, we need to use the formula:  [tex]E=k\frac{q}{r^{2} }[/tex]

And since we are observing the effects of multiple charges at once...

E=ΣE, which just means wee need to add all the observed electric fields together:

ΣE= [tex]k\frac{q2}{r^{2} } +k\frac{q3}{r^{2} }[/tex]

Since we are observing [static] electric fields here, we don't actually need q1's charge. (Though if you wanted to find the net force you would.) Now, before we start plugging values in, let's acknowledge what we know. We know that:

These are actually really nice to have, because now we can simplify our expression to:

[tex]E=k\frac{2q}{r^{2} }[/tex]

Now let's plug in our values and get an answer out.

E= 2(8.99×10^9)(4×10^-5)/(0.24)

Plugging all that in, I get:

E≅1.2×10^7 N/C

If you end up needing the net force, F=(q1)(E). That is, you just multiply the electric field by the value of q1. And again, if your teacher wants the answer in vector component form, then the answer will look different.

Let me know what doesn't make sense, or if I got something wrong. Good luck with AP Phy.!

Edit: I put the component form for my answer in the attachment. I also noticed a small calculator related error in my original answer. I updated that to match the new one.

Answer:

True

Explanation:

The bodies internal organs move around, even after a collision that may impact your skeletal system.

When a collision occurs and the body comes to a sudden stop, the internal organs can continue to move due to their inertia. Yes, that statement is generally true.

Inertia is the property of an object that resists changes in its state of motion. The internal organs of the body, such as the heart, lungs, liver, and others, are not directly attached to the skeletal structure and are instead supported by connective tissues and surrounded by fluids.

During a collision, the body experiences a rapid deceleration or change in velocity. While the external motion of the body may come to a stop, the internal organs, due to their inertia, continue to move forward momentarily until they are acted upon by internal forces. This phenomenon is known as "organ motion" or "organ inertia."

In situations where high-impact collisions occur, such as in car accidents or contact sports, the continued motion of internal organs can result in serious injuries, even when external signs of trauma may be minimal.

To know more about the moment of inertia:

https://brainly.com/question/30051108

#SPJ6

Answer:

(i)    t = 5s

(ii)    x = 3.75*10^5 m

Explanation:

(i) To calculate the time that the electron takes to reach twice the value of its initial velocity, you use the following formula:

[tex]v=v_o+at[/tex]         (1)

vo: initial velocity of the electron = 5*10^4 m/s

v: final velocity of the electron = 2vo = 1*10^5 m/s

a: acceleration of the electron = 1*10^4 m/s^2

You solve the equation (1) for t, and replace the values of the parameters:

[tex]t=\frac{v-v_o}{a}=\frac{1*10^5m/s-5*10^4m/s}{1*10^4m/s^2}=5s[/tex]

The electron takes 5s to reach twice its initial velocity.

(ii) The distance traveled by the electron in such a time is:

[tex]x=v_ot+\frac{1}{2}at^2[/tex]          (2)

you replace the values of the parameters in the equation (2):

[tex]x=(5*10^4m/s)(5s)+\frac{1}{2}(1*10^4m/s^2)(5s)^2\\\\x=3.75*10^5m[/tex]

The distance traveled by the electron is 3.75*10^3m/s

Explanation:

horizontal velocity = 30 x Cos45 = 19.48m/s

to find horizontal displacement

vertical velocity = 30 x Cos45 = 22.81m/s

vertical displacement = vertical velocity x time

vertical displacement = 22.81 x 2 = 45.62m

Answer:

Displacement after two seconds

= <Dx,Dy> = <42.426, 1.593> m to three decimal places

Explanation:

Given:

arrow shot at 30m/s and 45 degrees with horizontal.

Hit bull's eye after 2 seconds.

Find horizontal and vertical displacements.

Vx = 30cos(30) m/seconds  constant  velocity

therefore

Dx = Vx*t = 30cos(30) m/s *  2 s = 60 cos (45) = 42.426 m

Vy = 30 sin(45) m/s  

Dy = Vy*t + a(t^2) /2  

= 30*sin(45) -9.81(2^2)/2        (g is accelerating downwards, so negative)

= 1.593 m

The net displacement after 2 seconds is

D = <Dx,Dy> = <42.426, 1.593> m to three decimal places

Answer:

82.76m

Explanation:

In order to find the distance of the steel ring to the ground, when its temperature has raised by 1°C, you first calculate the radius of the steel tube before its temperature increases.

You use the formula for the circumference of the steel ring:

[tex]C=2\pi r[/tex]    (1)

C: circumference of the ring = 40000 km = 4*10^7m (you assume the circumference is the length of the steel tube)

you solve for r in the equation (1):

[tex]r=\frac{C}{2\pi}=\frac{4*10^7m}{2\pi}=6,366,197.724m[/tex]

Next, you use the following formula to calculate the change in the length of the tube, when its temperature increases by 1°C:

[tex]L=Lo[1+\alpha \Delta T][/tex]         (2)

L: final length of the tube = ?

Lo: initial length of the tube = 4*10^7m

ΔT = change in the temperature of the steel tube = 1°C

α: thermal coefficient expansion of steel = 13*10^-6 /°C

You replace the values of the parameters in the equation (2):

[tex]L=(4*10^7m)(1+(13*10^{-6}/ \°C)(1\°C))=40,000,520m[/tex]

With the new length of the tube, you can calculate the radius of a ring formed with the tube. You again solve the equation (1) for r:

[tex]r'=\frac{C}{2\pi}=\frac{40,000,520m}{2\pi}=6,366,280.484m[/tex]

Finally, you compare both r and r' radius:

r' - r = 6,366,280.484m - 6,366,197.724m = 82.76m

Hence, the distance to the ring from the ground is 82.76m

Explanation:

Un tubo de acero de 40000 kilómetros forma un anillo que se ajusta bien a la circunferencia de la tierra. Imagine que las personas junto a él respiran para calentarlo con su aliento y aumentar su temperatura 1 grado Celsius. El tubo se hace más largo. También ya no queda ajustado. ¿A qué distancia sube sobre sobre el nivel del suelo? (solo tomar en cuenta la expansión radial al centro de la tierra, y aplicar la fórmula geométrica que relaciona la circunferencia C con el radio r: C= 2πr).

Answer:

amplitude

Explanation:

Amplitude is the characteristic of waves which caused the bridge to collapse.   Amplitude of a wave is the maximum amount of displacement of a particle occurs in the medium from its rest position. When the frequency of a wave reaches the natural frequency of the bridge, the oscillation of the bridge produce an amplitude where it causing the destruction of the bridge which is called Resonance. So we can say that amplitude is the characteristic of waves which is responsible for the collapse of the bridge.

Answer: C.interference, because constructive interference occurred when the wind frequency matched the natural frequency of the bridge

Explanation:

The catch in this one is:  We don't know how much force the student used to push the bike.  

It wasn't necessarily the 100N.  That's just the weight of the bike. But you know that you can push a car, a wagon, or a bicycle hard, you can push it not so hard, you can give it a little push, you can give it a big push, you can push it strong, you can push it weak, you can push it medium.  The harder you push, the more it'll accelerate, but it's completely up to you how hard you want to push.  That's what's so great about wheels !  That's why they were such a great invention ! This is where I made my biggest mistake. This guy came into my store one day and said he's got this great invention, it's definitely going to take off, it'll be a winner for sure, he called it a "wheel".  I looked at it, I turned it over and I looked on all sides. I thought it was too simple.  I didn't know then it was elegant. I threw him out.  I was so dumb.  I could have invested money in that guy, today I would have probably more than a hundred dollars.

Anyway, can we figure out how much force the student used to push with ?  Stay tuned:

-- The bike covered 15 meters in 5 seconds.  Its average speed during the whole push was (15m/5s) = 3 meters/sec.

-- If the bike started out with no speed, and its average speed was 3 m/s, then it must have been moving at 6 m/s at the end of the push.

-- If its speed increased from zero to 6 m/s in 5 seconds, then its acceleration was (6m/s / 5 sec) = 1.2 m/s²

-- The bike's weight is 100N.  

(mass) x (gravity) = 100N

Bikemass = (100N) / (9.8 m/s²)

Bikemass = 10.2 kilograms

-- F = m A

Force = (mass) x (acceleration)

Force = (10.2 kg) x (1.2 m/s²)

Force = 12.24 N

-- Work = (force) x (distance)

Work = (12.24 N) x (15 m)

Work = 183.67 Joules

-- Power = (work done) / (time to do the work)

Power = (183.67 joules) / (5 seconds)

Power = 36.73 watts