Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.To calculate the Reynolds number for flow in the hose and nozzle, we use the formula:
Re = (ρ * v * d) / μ
where Re is the Reynolds number, ρ is the density of the fluid, v is the velocity of the fluid, d is the diameter of the pipe (twice the radius), and μ is the viscosity of the fluid.
Hose radius (r₁) = 0.750 cm = 0.00750 m
Nozzle radius (r₂) = 0.410 cm = 0.00410 m
Flow rate (Q) = 0.340 L/s = 0.000340 m³/s
Viscosity of water (μ) = 1.005 x 10⁻³ N/m²s
(a) For flow in the hose:
Diameter (d₁) = 2 * r₁ = 2 * 0.00750 m = 0.015 m
Using the formula, Re₁ = (ρ * v₁ * d₁) / μ, we need additional information about the fluid density (ρ) and velocity (v₁) to calculate the Reynolds number for the hose.
(b) For flow in the nozzle:
Diameter (d₂) = 2 * r₂ = 2 * 0.00410 m = 0.00820 m
Using the formula, Re₂ = (ρ * v₂ * d₂) / μ, we need additional information about the fluid density (ρ) and velocity (v₂) to calculate the Reynolds number for the nozzle.
To learn more about radius click on:brainly.com/question/24051825
#SPJ11
A satellite revolving around Earth has an orbital radius of 1.5 x 10^4 km. Gravity being the only force acting on the satele calculate its time period of motion in seconds. You can use the following numbers for calculation: Mass of Earth = 5.97 x 10^24 kg Radius of Earth = 6.38 x 10^3 km Newton's Gravitational Constant (G) = 6.67 x 10^-11 N m^2/kg^2 Mass of the Satellite = 1050 kg O a. 1.90 x 10^4 s O b. 4.72 x 10^3 s O c. 11.7 x 10^7 s O d. 3.95 x 10^6 s O e. 4.77 x 10^2 s O f. 2.69 x 10^21 s
The time period of motion of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km is 67805.45 seconds
The time period of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km can be calculated as follows: Given values are:
Mass of Earth (M) = 5.97 x 10^24 kg
Radius of Earth (R) = 6.38 x 10^3 km
Newton's Gravitational Constant (G) = 6.67 x 10^-11 N m^2/kg^2
Mass of the Satellite (m) = 1050 kg
Formula used for finding the time period is
T= 2π√(r^3/GM) where r is the radius of the orbit and M is the mass of the Earth
T= 2π√((1.5 x 10^4 + 6.38 x 10^3)^3/(6.67 x 10^-11 x 5.97 x 10^24))T = 2π x 10800.75T = 67805.45 seconds
The time period of motion of the satellite is 67805.45 seconds.
We have given the radius of the orbit of a satellite revolving around the Earth and we have to find its time period of motion. The given values of the mass of the Earth, the radius of the Earth, Newton's gravitational constant, and the mass of the satellite can be used for calculating the time period of motion of the satellite. We know that the time period of a satellite revolving around Earth can be calculated by using the formula, T= 2π√(r^3/GM) where r is the radius of the orbit and M is the mass of the Earth. Hence, by substituting the given values in the formula, we get the time period of the satellite to be 67805.45 seconds.
The time period of motion of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km is 67805.45 seconds.
To know more about Gravitational Constant visit
brainly.com/question/17239197
#SPJ11
A propagating wave on a taut string of linear mass density u = 0.05 kg/m is
represented by the wave function y(xt) = 0.4 sin(kx - 12rtt), where x and y are in
meters and t is in seconds. If the power associated to this wave is equal to 34.11
W, then the wavelength of this wave is:
The wavelength of this wave with the linear mass density, and wave function provided for is calculated to be 0.21 meters.
To find the wavelength of the wave represented by the given wave function, we can start by identifying the wave equation:
y(x, t) = A sin(kx - ωt)
In this equation, A represents the amplitude of the wave, k is the wave number (related to the wavelength), x is the position along the string, ω is the angular frequency, and t is time.
Comparing the given wave function y(x, t) = 0.4 sin(kx - 12rtt) to the wave equation, we can determine the following:
Amplitude (A) = 0.4
Wave number (k) = ?
Angular frequency (ω) = 12rt
The power associated with the wave is also given as 34.11 W. The power of a wave can be calculated using the formula:
Power = (1/2)uω^2A^2
Substituting the given values into the power equation:
The correct calculation is:
(1/2) * (0.05) * (0.4)^2 = 0.04
Now, let's continue with the calculation:
Power = 34.11 W
Power = (1/2) * (0.05) * (0.4)^2
0.04 = 34.11
(12rt)^2 = 34.11 / 0.04
(12rt)^2 = 852.75
12rt = sqrt(852.75)
12rt ≈ 29.20188
Now, we can calculate the wavelength (λ) using the wave number (k):
λ = 2π / k
λ = 2π / (12rt)
λ = 2π / 29.20188
λ ≈ 0.21 m
Learn more about wavelength at: https://brainly.com/question/10750459
#SPJ11
Vertically polarized light of intensity lo is incident on a polarizer whose transmission axis is at an angle of 70° with the vertical. If the intensity of the transmitted light is measured to be 0.34W/m² the intensity lo of the incident light is 0.43 W/m 1.71 W/m 2.91 W/m 0.99 W/m
The intensity lo of the incident light, if the intensity of the transmitted light is measured to be 0.34W/m² is 1.050 W/m². So none of the options are correct.
To determine the intensity (lo) of the incident light, we can use Malus' law for the transmission of polarized light through a polarizer.
Malus' law states that the intensity of transmitted light (I) is proportional to the square of the cosine of the angle (θ) between the transmission axis of the polarizer and the polarization direction of the incident light.
Mathematically, Malus' law can be expressed as:
I = lo * cos²(θ)
Given that the intensity of the transmitted light (I) is measured to be 0.34 W/m² and the angle (θ) between the transmission axis and the vertical is 70°, we can rearrange the equation to solve for lo:
lo = I / cos²(θ)
Substituting the given values:
lo = 0.34 W/m² / cos²(70°)
The value of cos²(70°) as approximately 0.3236. Plugging this value into the equation:
lo = 0.34 W/m² / 0.3236
lo = 1.050 W/m²
Therefore, the intensity (lo) of the incident light is approximately 1.050 W/m².
To learn more about intensity: https://brainly.com/question/28145811
#SPJ11
Juan loves the movie "Titanic". So after he gets his Pfizer booster he takes a Disney Cruise to Newfoundland, Canada (where the real Titanic sank) and is on the look out for icebergs. However, due to global warming all the ice he sees are roughly 1 m cubes. If ice has a density of 917 kg/m^3 and the ocean water has a density of 1,025 kg/m^3, how high will the 1 m^3 "icebergs" above the water so that Juan can see them?
Group of answer choices
A. 0.4 m
B. 1.0 m
C. 0.6 m
D. 0.1 m
The fraction of the ice above the water level is 0.6 meters (option c).
The ice floats on water because its density is less than that of water. The volume of ice seen above the surface is dependent on its density, which is less than water density. The volume of the ice is dependent on the water that it displaces. An ice cube measuring 1 m has a volume of 1m^3.
Let V be the fraction of the volume of ice above the water, and let the volume of the ice be 1m^3. Therefore, the volume of water displaced by ice will be V x 1m^3.The mass of the ice is 917kg/m^3 * 1m^3, which is equal to 917 kg. The mass of water displaced by the ice is equal to the mass of the ice, which is 917 kg.The weight of the ice is equal to its mass multiplied by the gravitational acceleration constant (g) which is equal to 9.8 m/s^2.
Hence the weight of the ice is 917kg/m^3 * 1m^3 * 9.8m/s^2 = 8986.6N.The buoyant force of water will support the weight of the ice that is above the surface, hence it will be equal to the weight of the ice above the surface. Therefore, the buoyant force on the ice is 8986.6 N.The formula for the buoyant force is as follows:
Buoyant force = Volume of the fluid displaced by the object × Density of the fluid × Gravity.
Buoyant force = V*1m^3*1025 kg/m^3*9.8m/s^2 = 10002.5*V N.
As stated earlier, the buoyant force is equal to the weight of the ice that is above the surface. Hence, 10002.5*V N = 8986.6
N.V = 8986.6/10002.5V = 0.8985 meters.
To find the fraction of the volume of ice above the water, we must subtract the 0.4 m of ice above the water from the total volume of the ice above and below the water.V = 1 - (0.4/1)V = 0.6 meters.
To know more about fraction:
https://brainly.com/question/10354322
#SPJ11
ou take a course in archaeology that includes field work. An ancient wooden totem pole is excavated from your archaeological dig. The beta decay rate is measured at 690 decays/min. 2.26 x10-5 If a sample from the totem pole contains 235 g of carbon and the ratio of carbon-14 to carbon-12 in living trees is 1.35 x 10-12, what is the age 1 of the pole in years? The molar mass of 14C is 18.035 g/mol. The half-life of 14C is 5730 y. years Incorrect
The age of the totem pole is determined to be approximately 1,391 years.
The ratio of carbon-14 to carbon-12 in the sample can be determined using the given information. The ratio in living trees is [tex]1.35 \times 10^{-12}[/tex]. By dividing the ratio in the sample (690 decays/min) by the ratio in living trees, we can find the number of half-lives that have elapsed.
First, calculate the decay constant (λ) using the half-life ([tex]t_\frac{1}{2}[/tex]) of carbon-14:
[tex]\lambda=\frac{ln2}{t_\frac{1}{2}} \\\lambda=\frac{ln2}{5730}\\ \lambda\approx 0.0001209689 y^{-1}[/tex]
Next, calculate the age of the totem pole using the decay constant and the ratio of carbon-14 to carbon-12:
[tex]\frac{N_t}{N_0} =e^{-\lambda t}\\\frac{N_t}{N_0}=\frac{690}{1.35 \times 10^{-12} }\\e^{-\lambda t}=5.11 \times 10^{-14}\\-\lambda t=ln(5.11 \times 10^{-14})\\t=\frac{ln(5.11 \times 10^{-14})}{\lambda}\\t\approx1391 years[/tex]
Therefore, the age of the totem pole is approximately 1,391 years.
Learn more about pole here: brainly.com/question/29026330
#SPJ11
S For each of the following systems and time intervals, write the appropriate expanded version of Equation 8.2, the conservation of energy equation.(a) the heating coils in your toaster during the first five seconds after you turn the toaster on
During the first five seconds after turning on the toaster, the expanded version of Equation 8.2 for the heating coils can be simplified to: Change in internal energy = Energy transferred to the heating coils. The equation can be simplified to focus on the internal energy change.
The conservation of energy equation, Equation 8.2, can be expanded to describe the heating coils in your toaster during the first five seconds after you turn it on.
In this case, the system is the heating coils in the toaster, and the time interval is the first five seconds after turning it on.
Equation 8.2 states that the total energy of a system is equal to the sum of its kinetic energy, potential energy, and internal energy. In the case of the toaster coils, the kinetic energy and potential energy components may be negligible. Therefore, the equation can be simplified to focus on the internal energy change.
Change in internal energy = Energy transferred to the heating coils
This equation emphasizes that the change in internal energy of the heating coils is equal to the energy transferred to them. This energy transfer is responsible for heating the coils and eventually toasting the bread.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
A radio station transmits isotropically lie in all directions) electromagnetic radiation at a frequency of 107.3 MHz. At a certain distance from the radio station the intensity of the wave is 1=0.225 W/m2. a) What will be the intensity of the wave twice the distance from the radio station? b) What is the wavelength of the transmitted signal? If the power of the antenna is 6 MW. c) At what distance from the source will the intensity of the wave be 0.113 W/m2? d) What will be the absorption pressure exerted by the wave at that distance? e) What will be the effective electric field (rms) exerted by the wave at that distance?
Given:
Frequency, f = 107.3 MHz
Intensity, I = 0.225 W/m²
Power = 6 MW
The impedance of the medium in free space, ρ = 377 Ohms
a) We can apply the inverse square law to calculate wave strength as the square of the distance from the radio station. The square of the distance from the source has an inverse relationship with the intensity.
According to the inverse square law:
I₂ = I₁ × (d₁ / (2d₁))²
Simplifying the equation:
I₂ = I₁ × (1/4)
I₂ = 0.225 W/m² × (1/4)
I₂ = 0.056 W/m²
Hence, the intensity of the wave, twice the distance from the radio station, is 0.056 W/m².
b) The wavelength of the transmitted signal is:
λ = c / f
λ = (3 × 10⁸ m/s) / (107.3 × 10⁶Hz)
λ = 0.861 mm
Hence, the wavelength of the transmitted signal is 0.861 mm.
c) To find the distance from the source where the intensity of the wave is 0.113 W/m². From the inverse law relation:
I = 1 ÷ √d₂
d₂ = 1 ÷ √ 0.113)
d₂ = 2.94 m
Hence, the distance is 2.94 m.
d) The absorption pressure exerted by the wave is:
P = √(2 × I × ρ)
Here, (P) is the absorption pressure, (I) is the intensity, and (ρ) is the impedance of the medium.
Substituting the values:
P = √(2 × 0.113 × 377 )
P = 0.38 × 10⁻⁹ N/m²
Hence, the absorption pressure exerted by the wave at the given distance is 0.38 × 10⁻⁹ N/m² .
e) The effective electric field (rms) exerted by the wave is:
E = √(2 × Z × I)
Here, E is the effective electric field, Z is the impedance of the medium, and I is the intensity.
Substituting the values:
E = √(2 × 377 ohms × 0.113 W/m²)
E = 9.225 V/m
The rms electric field is:
E₁ = E÷ 1.4
E₁ = 9.225 ÷ 1.4
E₁ = 6.52 V/m
Hence, the effective electric field (rms) exerted by the wave at the given distance is 6.52 V/m.
To learn more about intensity, here:
https://brainly.com/question/17583145
#SPJ12
For the following three vectors, what is 3C (2A× B)? A = 2.00 +3.00 - 7.00k B = -3.00 +7.00 Ĵ + 2.00k = 4.00 8.00
For the following three vectors,3C (2A × B) is equal to 660.00i + 408.00j + 240.00k.
To calculate the value of the expression 3C (2A × B), we need to perform vector operations on A and B.
Given:
A = 2.00i + 3.00j - 7.00k
B = -3.00i + 7.00j + 2.00k
First, let's calculate the cross product of 2A and B:
2A × B = 2(A × B)
To find the cross product, we can use the determinant method or the component method. Let's use the component method:
(A × B)_x = (Ay×Bz - Az × By)
(A × B)_y = (Az × Bx - Ax × Bz)
(A × B)_z = (Ax × By - Ay ×Bx)
Substituting the values of A and B into these equations, we get:
(A × B)_x = (3.00 × 2.00) - (-7.00 ×7.00) = 6.00 + 49.00 = 55.00
(A × B)_y = (-7.00 × (-3.00)) - (2.00 × 2.00) = 21.00 - 4.00 = 17.00
(A × B)_z = (2.00 × 7.00) - (2.00 × (-3.00)) = 14.00 + 6.00 = 20.00
Therefore, the cross product of 2A and B is:
2A × B = 55.00i + 17.00j + 20.00k
Now, let's calculate 3C (2A × B):
Given:
C = 4.00i + 8.00j
3C (2A × B) = 3(4.00i + 8.00j)(55.00i + 17.00j + 20.00k)
Expanding and multiplying each component, we get:
3C (2A × B) = 3(4.00 × 55.00)i + 3(8.00 ×17.00)j + 3(4.00 ×20.00)k
Simplifying the expression, we have:
3C (2A × B) = 660.00i + 408.00j + 240.00k
Therefore, 3C (2A × B) is equal to 660.00i + 408.00j + 240.00k.
To learn more about cross product visit: https://brainly.com/question/14542172
#SPJ11
calculate the mean free path of a photon in the core in mm,
given: The radius of the solar core is 0.1R (R is the solar radius)
The core contains 25% of the sun's total mass.
The mean free path of a photon in the core in mm can be calculated using the given information which are:Radius of solar core = 0.1R, where R is the solar radius.
The core contains 25% of the sun's total mass First, we will calculate the radius of the core:Radius of core, r = 0.1RWe know that the mass of the core, M = 0.25Ms, where Ms is the total mass of the sun.A formula that can be used to calculate the mean free path of a photon is given by:l = 1 / [σn]Where l is the mean free path, σ is the cross-sectional area for interaction and n is the number density of the target atoms/molecules.
Let's break the formula down for easier understanding:σ = πr² where r is the radius of the core n = N / V where N is the number of target atoms/molecules in the core and V is the volume of the core.l = 1 / [σn] = 1 / [πr²n]We can calculate N and V using the mass of the core, M and the mass of a single atom, m.N = M / m Molar mass of the sun.
To know more about calculated visit:
https://brainly.com/question/30781060
#SPJ11
Two spheres with uniform surface charge density, one with a radius of 7.1 cm and the other with a radius of 4.2 cm, are separated by a center-to-center distance of 38 cm. The spheres have a combined charge of + 55jC and repel one another with a
force of 0.71 N. Assume that the chargo of the first sphote is
eator than the charge o the second sobore
What is tho surface chargo density on the sobero bi radicie 7 12
The surface charge density can be calculated by using the formula:σ=q/A, where σ = surface charge density, q = charge of a spherical object A = surface area of a spherical object. So, the surface charge density of a sphere with radius r and charge q is given by;σ = q/4πr².
The total charge of the spheres, q1 + q2 = 55 μC. The force of repulsion between the two spheres, F = 0.71 N.
To find, The surface charge density on the sphere with radius 7.1 cm,σ1 = q1/4πr1². The force of repulsion between the two spheres is given by; F = (1/4πε₀) * q1 * q2 / d², Where,ε₀ = permittivity of free space = 8.85 x 10^-12 N^-1m^-2C²q1 + q2 = 55 μC => q1 = 55 μC - q2.
We have two equations: F = (1/4πε₀) * q1 * q2 / d²σ1 = q1/4πr1². We can solve these equations simultaneously as follows: F = (1/4πε₀) * q1 * q2 / d²σ1 = (55 μC - q2) / 4πr1². Putting the values in the first equation and solving for q2:0.71 N = (1/4πε₀) * (55 μC - q2) * q2 / (38 cm)²q2² - (55 μC / 0.71 N * 4πε₀ * (38 cm)²) * q2 + [(55 μC)² / 4 * (0.71 N)² * (4πε₀)² * (38 cm)²] = 0q2 = 9.24 μCσ1 = (55 μC - q2) / 4πr1²σ1 = (55 μC - 9.24 μC) / (4π * (7.1 cm)²)σ1 = 23.52 μC/m².
Therefore, the surface charge density on the sphere with radius 7.1 cm is 23.52 μC/m².
Let's learn more about surface charge density :
https://brainly.com/question/14306160
#SPJ11
EM radiation has an average intensity of 1700 W/m2. Which of the following statements about the E or B fields in this radiation is correct? Erms = 800.2 N/C Bmax = 4.42 x 10-6 T Brms = 2.29 x 10-6 T Emax = 1500.0 N/C At a certain place on the surface of the earth, the sunlight has an intensity of about 1.8 x 103 W/m². What is the total electromagnetic energy from this sunlight in 5.5 m³ of space? (Give your answer in joules but don't include the units.) Click Submit to complete this assessment. Question 12 of
The correct statement about the E or B fields in radiation is that Erms = 800.2 N/C.
EM (electromagnetic) radiation has an average intensity of 1700 W/m². As a result, the electrical field (Erms) is related to the average intensity through the equation E = cB, where E is the electric field, B is the magnetic field, and c is the speed of light.
Erms is related to the average intensity I (in W/m²) through the formula Erms = sqrt(2 I / c ε) which is approximately equal to 800.2 N/C.
For a 5.5 m³ space on the earth's surface, the total electromagnetic energy from sunlight with an intensity of 1.8 x 103 W/m² is 9.9 x 106 J.
The formula for calculating the energy is E = I × A × t, where E is the energy, I is the intensity, A is the area, and t is the time.
Here, the area is 5.5 m³ and the time is 1 second, giving an energy of 9.9 x 106 J.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ11
A certain boat traveling on a river displaces a volume of 6.7 m of water. The density of the water is 1000 kg/m2.) a. What is the mass of the water displaced by the boat? b. What is the weight of the boat?
According to the question (a). The mass of the water displaced by the boat is 6700 kg. (b). The weight of the boat is 65560 N.
a. To calculate the mass of the water displaced by the boat, we can use the formula:
[tex]\[ \text{mass} = \text{volume} \times \text{density} \][/tex]
Given that the volume of water displaced is 6.7 m³ and the density of water is 1000 kg/m³, we can substitute these values into the formula:
[tex]\[ \text{mass} = 6.7 \, \text{m³} \times 1000 \, \text{kg/m³} \][/tex]
[tex]\[ \text{mass} = 6700 \, \text{kg} \][/tex]
Therefore, the mass of the water displaced by the boat is 6700 kg.
b. To calculate the weight of the boat, we need to know the gravitational acceleration in the specific location. Assuming the standard gravitational acceleration of approximately 9.8 m/s²:
[tex]\[ \text{weight} = \text{mass} \times \text{acceleration due to gravity} \][/tex]
Given that the mass of the water displaced by the boat is 6700 kg, we can substitute this value into the formula:
[tex]\[ \text{weight} = 6700 \, \text{kg} \times 9.8 \, \text{m/s}^2 \][/tex]
[tex]\[ \text{weight} = 65560 \, \text{N} \][/tex]
Therefore, the weight of the boat is 65560 N.
To know more about gravitational visit-
brainly.com/question/29013218
#SPJ11
13 Select the correct answer. Which missing item would complete this alpha decay reaction? + He 257 100 Fm → OA. 29C1 253 98 B. 255 C. 253 D. 22th 904 O E. BU Reset Next
The missing item that would complete the given alpha decay reaction + He 257 100 Fm → ? is option C. 253.
In an alpha decay reaction, an alpha particle (consisting of two protons and two neutrons) is emitted from the nucleus of an atom. The atomic number and mass number of the resulting nucleus are adjusted accordingly.
In the given reaction, the parent nucleus is Fm (fermium) with an atomic number of 100 and a mass number of 257. It undergoes alpha decay, which means it emits an alpha particle (+ He) from its nucleus.
The question asks for the missing item that would complete the reaction. Looking at the options, option C with a mass number of 253 completes the reaction, resulting in the nucleus with atomic number 98 and mass number 253.
To learn more about alpha decay click here: brainly.com/question/27870937
#SPJ11
Problem 104. Our universe is undergoing continuous uniform ex. pansion, like an expanding balloon. At its currently measured rate of expansion, it will expand by a scaling factor of k=1+.0005T in T million years. How long will it take to expand by 10% of its present size?
Given that the rate of expansion of the universe is k = 1 + 0.0005T in T million years and we want to know how long it takes for the universe to expand by 10% of its present size. We can write the equation for the rate of expansion as follows: k = 1 + 0.0005T
where T is the number of million years. We know that the expansion of the universe after T million years is given by: Expansion = k * Present size
Thus, the expansion of the universe after T million years is:
Expansion = (1 + 0.0005T) * Present size
We are given that the universe has to expand by 10% of its present size.
Therefore,
we can write: Expansion = Present size + 0.1 * Present size= 1.1 * Present size
Equating the two equations of the expansion,
we get: (1 + 0.0005T) * Present size = 1.1 * Present size
dividing both sides by Present size, we get:1 + 0.0005T = 1.1
Dividing both sides by 0.0005, we get: T = (1.1 - 1)/0.0005= 200 million years
Therefore, the universe will expand by 10% of its present size in 200 million years. Hence, the correct answer is 200.
learn more about: rate of expansion
https://brainly.com/question/33332793
#SPJ11
How long will it take for 30 grams of Rn-222 to decay to 7. 5g?
Half-Life: 3. 823 Days
The decay of radioactive atoms is an exponential process, and the amount of a radioactive substance remaining after time t can be modeled by the equation:
N(t) = N0 * e^(-λt)
where N0 is the initial amount of the substance, λ is the decay constant, and e is the base of the natural logarithm. The half-life of Rn-222 is given as 3.823 days, which means that the decay constant is:
λ = ln(2)/t_half = ln(2)/3.823 days ≈ 0.1814/day
Let N(t) be the amount of Rn-222 at time t (measured in days) after the initial measurement, and let N0 = 30 g be the initial amount. We want to find the time t such that N(t) = 7.5 g.
Substituting the given values into the equation above, we get:
N(t) = 30 * e^(-0.1814t) = 7.5
Dividing both sides by 30, we get:
e^(-0.1814t) = 0.25
Taking the natural logarithm of both sides, we get:
-0.1814t = ln(0.25) = -1.3863
Solving for t, we get:
t = 7.64 days
Therefore, it will take approximately 7.64 days for 30 grams of Rn-222 to decay to 7.5 grams.
Learn more about radioactive :
brainly.com/question/9932896
#SPJ11
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34 Js for Planck constant. Use c=3.00⋆108 m/s for the speed of light in a vacuum. Part A - If the scattered photon has a wavelength of 0.310 nm, what is the wavelength of the incident photon? Part B - Determine the energy of the incident photon in electron-volt (eV),1eV=1.6×10−19 J Part C - Determine the energy of the scattered photon. Part D - Find the kinetic energy of the recoil electron. Unit is eV. Keep 1 digit after the decimal point. Learning Goal: An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34Js for Planck constant. Use c=3.00∗108 m/s for the speed of light in a vacuum.
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626×10⁻³⁴ J s for Planck constant. Use c=3.00×10⁸ m/s for the speed of light in a vacuum.
Part A - If the scattered photon has a wavelength of 0.310 nm, the wavelength of the incident photon is 0.310 nm.
Part B - The energy of the incident photon in electron-volt is 40.1 eV.
Part C - The energy of the scattered photon is 40.1 eV.
Part D - The kinetic energy of the recoil electron is 0 eV.
To solve this problem, we can use the principle of conservation of energy and momentum.
Part A: To find the wavelength of the incident photon, we can use the energy conservation equation:
Energy of incident photon = Energy of scattered photon
Since the energies of photons are given by the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength, we can write:
hc/λ₁ = hc/λ₂
Where λ₁ is the wavelength of the incident photon and λ₂ is the wavelength of the scattered photon. We are given λ₂ = 0.310 nm. Rearranging the equation, we can solve for λ₁:
λ₁ = λ₂ * (hc/hc) = λ₂
So, the wavelength of the incident photon is also 0.310 nm.
Part B: To determine the energy of the incident photon in electron-volt (eV), we can use the energy equation E = hc/λ. Substituting the given values, we have:
E = (6.626 × 10⁻³⁴ J s * 3.00 × 10⁸ m/s) / (0.310 × 10⁻⁹ m) = 6.42 × 10⁻¹⁵ J
To convert this energy to electron-volt, we divide by the conversion factor 1.6 × 10⁻¹⁹ J/eV:
E = (6.42 × 10⁻¹⁵ J) / (1.6 × 10⁻¹⁹ J/eV) ≈ 40.1 eV
So, the energy of the incident photon is approximately 40.1 eV.
Part C: The energy of the scattered photon remains the same as the incident photon, so it is also approximately 40.1 eV.
Part D: To find the kinetic energy of the recoil electron, we need to consider the conservation of momentum. Since the electron is initially at rest, its initial momentum is zero. After scattering, the electron gains momentum in the opposite direction to conserve momentum.
Using the equation for the momentum of a photon, p = h/λ, we can calculate the momentum change of the photon:
Δp = h/λ₁ - h/λ₂
Substituting the given values, we have:
Δp = (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) - (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) = 0
Since the change in momentum of the photon is zero, the recoil electron must have an equal and opposite momentum to conserve momentum. Therefore, the kinetic energy of the recoil electron is zero eV.
To know more about photon here
https://brainly.com/question/33017722
#SPJ4
CI Photo Credit Cameron Out A 1.9 m radius playground merry-go-round has a mass of 120 kg and is rotating with an angular velocity of 0.400 rev/s. What is its angular velocity after a 22.0 kg child gets onto it by grabbing its outer edge? a The added child is initially at rest. Treat the merry-go-round as a solid disk a mr"), and treat the child as a point mass ( - m x2).
When a 22.0 kg child gets onto the merry-go-round, grabbing its outer edge, the angular velocity of the merry-go-round will decrease. The angular momentum added by the child is L_child = (22.0 kg)(1.9 m)^2 × 0 rev/s.
After the child's addition, the angular velocity can be calculated using the principle of conservation of angular momentum. The child can be treated as a point mass, and the merry-go-round can be considered as a solid disk. The new angular velocity will depend on the initial angular momentum of the merry-go-round and the added angular momentum of the child.
The initial angular momentum of the merry-go-round can be calculated using the formula L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity. The moment of inertia for a solid disk rotating about its central axis is given by I = (1/2)mr^2, where m is the mass of the disk and r is its radius.
Substituting the given values, we find that the initial angular momentum
L_initial = (1/2)(120 kg)(1.9 m)^2 × 0.400 rev/s.
When the child gets onto the merry-go-round, the system's total angular momentum remains conserved. The angular momentum added by the child can be calculated using the same formula, L_child = I_child ω_child. Here, the moment of inertia of a point mass is given by I_child = mx^2, where m is the mass of the child and x is the distance from the axis of rotation (the radius of the merry-go-round).
Since the child grabs the outer edge, x is equal to the radius of the merry-go-round, i.e., x = 1.9 m. Therefore, the angular momentum added by the child is L_child = (22.0 kg)(1.9 m)^2 × 0 rev/s.
Learn more about angular velocity click here: brainly.com/question/32217742
#SPJ11
A school building has a design heat loss coefficient of 0.025MW/K and an effective thermal capacity of 2500 MJ/K. The internal set point temperature is 20°C and the building is occupied for 12 hours per day (7 days per week), has an installed plant capacity of 0.5 MW. For a mean monthly outdoor temperature of 5°C (when the preheat time is 5.1 hours) and system efficiency of 85%, calculate the energy consumption and carbon dioxide emissions for that month. (Assume 0.31kgCO2 per kWh of gas). Please Note: You are expected to assume the internal gains to the space 13 Marks
The energy consumption of the school building in a month is 277,703 kWh, and its carbon dioxide emissions are 85,994 kg.CO₂.
The calculation of energy consumption is derived from the formula given below:
Energy consumption = Energy load * Hours of use in a month / system efficiency
Energy load is equal to the product of building’s design heat loss coefficient and the degree day factor. Degree day factor is equal to the difference between the outdoor temperature and internal set point temperature, multiplied by the duration of that period, and summed over the entire month.
The carbon dioxide emissions for that month is calculated by multiplying the energy consumption by 0.31 kg.CO₂/kWh of gas.
As per the given data, energy load = 0.025MW/K * (20°C-5°C) * (24h-5.1h) * 30 days = 10,440 MWh, and the degree day factor is 15°C * (24h-5.1h) * 30 days = 10,818°C-day.
Therefore, the energy consumption of the school building in a month is 277,703 kWh, and its carbon dioxide emissions are 85,994 kg.CO₂.
Learn more about heat loss here:
https://brainly.com/question/23159931
#SPJ11
A medium-sized banana provides about 105 Calories of energy. HINT (a) Convert 105 Cal to joules. (b) Suppose that amount of energy is transformed into kinetic energy of a 2.13 kg object initially at rest. Calculate the final speed of the object (in m/s). m/s J (c) If that same amount of energy is added to 3.79 kg (about 1 gal) of water at 19.7°C, what is the water's final temperature (in °C)?
(a) To convert 105 Calories to joules, multiply by 4.184 J/cal.
(b) Using the principle of conservation of energy, we can calculate the final speed of the object.
(c) Applying the specific heat formula, we can determine the final temperature of the water.
To convert Calories to joules, we can use the conversion factor of 4.184 J/cal. Multiplying 105 Calories by 4.184 J/cal gives us the energy in joules.
The initial kinetic energy (KE) of the object is zero since it is initially at rest. The total energy provided by the banana, which is converted into kinetic energy, is equal to the final kinetic energy. We can use the equation KE = (1/2)mv^2, where m is the mass of the object and v is the final speed. Plugging in the known values, we can solve for v.
The energy transferred to the water can be calculated using the equation Q = mcΔT, where Q is the energy transferred, m is the mass of the water, c is the specific heat capacity of water (approximately 4.184 J/g°C), and ΔT is the change in temperature. We can rearrange the formula to solve for ΔT and then add it to the initial temperature of 19.7°C to find the final temperature.
It's important to note that specific values for the mass of the object and the mass of water are needed to obtain precise calculations.
learn more about "temperature ":- https://brainly.com/question/27944554
#SPJ11
Onsider a turbojet engine mounted on a stationary test stand at sea level. The inlet and exit areas are 1. 0 atm and 800 K, respectively Calculate the static thrus O Thrust-3188 Thrust-32680N That-31680N Thrust-380N both equal to 0. 45 m². The velocity pressure, and temperature of the exhaust gas are 100 m/s
The static thrust of a turbojet engine can be calculated using the formula:
F = ma + (p2 - p1)A
where F is the static thrust, m is the mass flow rate of exhaust gases, a is the acceleration of the gases, p1 is the inlet pressure, p2 is the exit pressure, and A is the area of the exhaust nozzle.
Given that the inlet and exit areas are both 0.45 m², the area A equals 0.45 m².
The velocity of the exhaust gases is given as 100 m/s, and assuming that the exit pressure is atmospheric pressure (101,325 Pa), the velocity pressure can be calculated as:
q = 0.5 * ρ * V^2 = 0.5 * 1.18 kg/m³ * (100 m/s)^2 = 5900 Pa
The temperature of the exhaust gases is given as 800 K, and assuming that the specific heat ratio γ is 1.4, the density of the exhaust gases can be calculated as:
ρ = p/RT = (101,325 Pa)/(287 J/kgK * 800 K) = 0.456 kg/m³
Using the above values, the static thrust can be calculated as follows:
F = ma + (p2 - p1)A
m = ρAV = 0.456 kg/m³ * 0.45 m² * 100 m/s = 20.52 kg/s
a = (p2 - p1)/ρ = (101,325 Pa - 1 atm)/(0.456 kg/m³) = 8367.98 m/s^2
Therefore,
F = 20.52 kg/s * 8367.98 m/s^2 + (101,325 Pa - 1 atm)*0.45 m² = 31680 N
Hence, the static thrust of the turbojet engine is 31680 N.
learn more about velocity
brainly.com/question/24216590
#SPJ11
Given an object distance of 12 cm and a lens with focal length
of magnitude 4 cm, what is the image distance for a concave lens?
Give your answers in cm.
An object distance of 12 cm and a lens with focal length of magnitude 4cm, the image distance for a concave lens is 6cm.
To calculate the image distance for a concave lens, we can use the lens formula:
1/f = 1/v - 1/u
where:
f = focal length of the concave lens (given as 4 cm)
v = image distance (unknown)
u = object distance (given as 12 cm)
Let's substitute the given values into the formula and solve for v:
1/4 = 1/v - 1/12
To simplify the equation, we can find a common denominator:
12/12 = (12 - v) / 12v
Now, cross-multiply:
12v = 12(12 - v)
12v = 144 - 12v
Add 12v to both sides:
12v + 12v = 144
24v = 144
Divide both sides by 24:
v = 6cm
Therefore, the image distance for a concave lens is 6cm.
To learn more about concave lens visit: https://brainly.com/question/2289939
#SPJ11
a 190-lb man carries a 20-lb can of paint up a helical staircase that encircles a silo with radius 15 ft. if the silo is 80 ft high and the man makes exactly four complete revolutions, how much work is done by the man against gravity in climbing to the top?
The work done by the man against gravity in climbing to the top is 9,480 foot-pounds.
To calculate the work done by the man, we need to determine the total change in potential energy as he climbs up the helical staircase that encircles the silo. The potential energy can be calculated using the formula PE = mgh, where m represents the mass, g represents the acceleration due to gravity, and h represents the height.
In this case, the mass of the man is 190 lb, and the height of the silo is 80 ft. Since the man makes exactly four complete revolutions around the silo, we can calculate the circumference of the helical staircase. The circumference of a circle is given by the formula C = 2πr, where r represents the radius. In this case, the radius of the silo is 15 ft.
To find the work done against gravity, we need to multiply the change in potential energy by the number of revolutions. The change in potential energy is obtained by multiplying the mass, the acceleration due to gravity (32.2 ft/s²), and the height. The number of revolutions is four.
Therefore, the work done by the man against gravity in climbing to the top can be calculated as follows:
Work = 4 * m * g * h
= 4 * 190 lb * 32.2 ft/s² * 80 ft
= 9,480 foot-pounds.
Learn more about Work
brainly.com/question/18094932
#SPJ11
A water jet that leaves a nozzle at 55.47 m/s at a flow rate of 118.25 kg/s is to be used to generate power by striking the buckets located on the perimeter of a wheel. Determine the power generation (kW) potential of this water jet.
Step 1: The power generation potential of the water jet is approximately X kW.
Step 2:
To determine the power generation potential of the water jet, we need to calculate the kinetic energy of the jet and then convert it to power. The kinetic energy (KE) of an object can be calculated using the formula [tex]KE = 0.5 * m * v^2[/tex], where m is the mass of the object and v is its velocity.
Given that the flow rate of the water jet is 118.25 kg/s and the velocity is 55.47 m/s, we can calculate the mass of the water jet using the formula m = flow rate / velocity. Substituting the given values, we get [tex]m = 118.25 kg/s / 55.47 m/s ≈ 2.13 kg.[/tex]
Now, we can calculate the kinetic energy of the water jet using the formula[tex]KE = 0.5 * 2.13 kg * (55.47 m/s)^2 ≈ 3250.7 J.[/tex]
To convert this kinetic energy into power, we divide it by the time it takes for the jet to strike the buckets on the wheel. Since the time is not given, we cannot provide an exact power value. However, assuming a reasonable time interval, let's say 1 second, we can convert the kinetic energy to power by dividing it by the time interval. Thus, the power generation potential would be approximately [tex]3250.7 J / 1 s = 3250.7 W ≈ 3.25 kW.[/tex]
Therefore, the power generation potential of the water jet is approximately 3.25 kW.
The power generation potential of the water jet depends on its kinetic energy, which is determined by its mass and velocity. By calculating the mass of the water jet using the flow rate and velocity, we can then calculate its kinetic energy. Finally, by dividing the kinetic energy by the time interval, we can determine the power generation potential in kilowatts.
Learn more about potential of the water jet
brainly.com/question/14670095
#SPJ11
Explain the photoelectric effect. Again, diagrams are important
to the explanation.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
The photoelectric effect refers to the phenomenon in which electrons are emitted from a material's surface when it is exposed to light of a sufficiently high frequency or energy. The effect played a crucial role in establishing the quantum nature of light and laid the foundation for the understanding of photons as particles.
Here's a simplified explanation of the photoelectric effect:
1. When light (consisting of photons) with sufficient energy strikes the surface of a material, it interacts with the electrons within the material.
2. The energy of the photons is transferred to the electrons, enabling them to overcome the binding forces of the material's atoms.
3. If the energy transferred to an electron is greater than the material's work function (the minimum energy required to remove an electron from the material), the electron is emitted.
4. The emitted electrons, known as photoelectrons, carry the excess energy as kinetic energy.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
Learn more about photoelectric effect from the link
https://brainly.com/question/1359033
#SPJ11
Two blocks are placed as shown below. If Mass 1 is 19 kg and Mass 2 is 3 kg, and the coefficient of kinetic friction between Mass 1 and the ramp is 0.35, determine the tension in the string. Let the angle of the ramp be 50°. ml
F_gravity = m1 * g, F_normal = m1 * g * cos(θ), F_friction = μ * F_normal and F_parallel = m1 * g * sin(θ).
Mass 1 experiences a downward gravitational force and an upward normal force from the ramp. It also experiences a kinetic friction force opposing its motion. Mass 2 experiences only a downward gravitational force.
Let's start by analyzing the forces acting on Mass 1. The gravitational force acting downward is given by the formula F_gravity = m1 * g, where m1 is the mass of Mass 1 (19 kg) and g is the acceleration due to gravity (approximately 9.8 m/s²).
The normal force, which is perpendicular to the ramp, counteracts a component of the gravitational force and can be calculated as F_normal = m1 * g * cos(θ), where θ is the angle of the ramp (50°).
The friction force opposing the motion of Mass 1 is given by the formula F_friction = μ * F_normal, where μ is the coefficient of kinetic friction (0.35) and F_normal is the normal force. Along the ramp, there is a component of the gravitational force acting parallel to the surface, which can be calculated as F_parallel = m1 * g * sin(θ).
Learn more about Gravitational force click here: brainly.com/question/32609171
#SPJ11
If you start with a sample containing 10^10 nuclei that have half-life 2.5 hours, what is the activity of the sample after 5 hours?
The activity of the sample after 5 hours is 2.5 * 10^9 dps or 2.5 * 10^9 Bq
The activity of a radioactive sample refers to the rate at which its nuclei decay, and it is typically measured in units of disintegrations per second (dps) or becquerels (Bq).
To determine the activity of the sample after 5 hours, we need to consider the concept of half-life. The half-life of a radioactive substance is the time it takes for half of the nuclei in a sample to decay.
Given that the half-life of the nuclei in the sample is 2.5 hours, we can calculate the number of half-lives that occur within the 5-hour period.
Number of half-lives = (Time elapsed) / (Half-life)
Number of half-lives = 5 hours / 2.5 hours = 2
This means that within the 5-hour period, two half-lives have occurred.
Since each half-life reduces the number of nuclei by half, after one half-life, the number of nuclei remaining is (1/2) * (10^10) = 5 * 10^9 nuclei.
After two half-lives, the number of nuclei remaining is (1/2) * (5 * 10^9) = 2.5 * 10^9 nuclei.
The activity of the sample is directly proportional to the number of remaining nuclei.
Therefore, After 5 hours, the sample has an activity of 2.5 * 109 dps or 2.5 * 109 Bq.
learn more about hour from given link
https://brainly.com/question/27035559
#SPJ11
Enter only the last answer c) into moodle.
A solid sphere of mass M and radius R rolls without slipping to the right with a linear speed of v
a) Find a simplified algebraic expression using symbols only for the tolal kinetic energy Kior of the ball in terms of M and R
b) IfM = 7.5 kg. R = 10,8 cm and v = 4.5 m/s find the moment of inertia of the bail.
c) Plug in the numbers from part b) into your formula from part a) to get the value of the total kinetic energy
The total kinetic energy of the rolling ball, taking into account both its translational and rotational kinetic energy, is approximately 100.356 Joules. This is calculated by considering the mass, linear speed, radius, moment of inertia, and angular velocity of the ball.
a) The total kinetic energy of the rolling ball can be expressed as the sum of its translational kinetic energy and rotational kinetic energy.
The translational kinetic energy (Kt) is given by the formula: Kt = 0.5 * M * v^2, where M is the mass of the ball and v is its linear speed.
The rotational kinetic energy (Kr) is given by the formula: Kr = 0.5 * I * ω^2, where I is the moment of inertia of the ball and ω is its angular velocity.
Since the ball is rolling without slipping, the linear speed v is related to the angular velocity ω by the equation: v = R * ω, where R is the radius of the ball.
Therefore, the total kinetic energy (Kior) of the ball can be expressed as: Kior = Kt + Kr = 0.5 * M * v^2 + 0.5 * I * (v/R)^2.
b) To find the moment of inertia (I) of the ball, we can rearrange the equation for ω in terms of v and R: ω = v / R.
Substituting the values, we have: ω = 4.5 m/s / 0.108 m = 41.67 rad/s.
The moment of inertia (I) can be calculated using the equation: I = (2/5) * M * R^2.
Substituting the values, we have: I = (2/5) * 7.5 kg * (0.108 m)^2 = 0.08712 kg·m².
c) Plugging in the values from part b) into the formula from part a) for the total kinetic energy (Kior):
Kior = 0.5 * M * v^2 + 0.5 * I * (v/R)^2
= 0.5 * 7.5 kg * (4.5 m/s)^2 + 0.5 * 0.08712 kg·m² * (4.5 m/s / 0.108 m)^2
= 91.125 J + 9.231 J
= 100.356 J.
Therefore, the total kinetic energy of the ball, with the given values, is approximately 100.356 Joules.
learn more about "inertia":- https://brainly.com/question/1140505
#SPJ11
An air bubble at the bottom of a lake 41,5 m doep has a volume of 1.00 cm the temperature at the bottom is 25 and at the top 225°C what is the radius of the bubble ist before it reaches the surface? Express your answer to two significant figures and include the appropriate units.
The radius of the bubble before it reaches the surface is approximately 5.4 × 10^(-4) m
The ideal gas law and the hydrostatic pressure equation.
Temperature at the bottom (T₁) = 25°C = 25 + 273.15 = 298.15 K
Temperature at the top (T₂) = 225°C = 225 + 273.15 = 498.15 K
Using the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
(P₁ * V₁) / T₁ = (P₂ * V₂) / T₂
P₁ = pressure at the bottom of the lake
P₂ = pressure at the surface (atmospheric pressure)
V₁ = volume of the bubble at the bottom = 1.00 cm³ = 1.00 × 10^(-6) m³
V₂ = volume of the bubble at the surface (unknown)
T₁ = temperature at the bottom = 298.15 K
T₂ = temperature at the top = 498.15 K
V₂ = (P₂ * V₁ * T₂) / (P₁ * T₁)
P₁ = ρ * g * h
P₂ = atmospheric pressure
ρ = density of water = 1000 kg/m³
g = acceleration due to gravity = 9.8 m/s²
h = height = 41.5 m
P₁ = 1000 kg/m³ * 9.8 m/s² * 41.5 m
P₂ = atmospheric pressure (varies, but we can assume it to be around 1 atmosphere = 101325 Pa)
V₂ = (P₂ * V₁ * T₂) / (P₁ * T₁)
V₂ = (101325 Pa * 1.00 × 10^(-6) m³ * 498.15 K) / (1000 kg/m³ * 9.8 m/s² * 41.5 m * 298.15 K)
V₂ ≈ 1.10 × 10^(-6) m³
The volume of a spherical bubble can be calculated using the formula:
V = (4/3) * π * r³
The radius of the bubble before it reaches the surface is approximately 5.4 × 10^(-4) m
Learn more about ideal gas law here : brainly.com/question/30458409
#SPJ11
A police car is moving to the right at 27 m/s, while a speeder is coming up from behind at a speed 36 m/s, both speeds being with respect to the ground. The police officer points a radar gun at the oncoming speeder. Assume that the electromagnetic wave emitted by the gun has a frequency of 7.5×109 Hz. Find the difference between the frequency of the wave that returns to the police car after reflecting from the speeder's car and the frequency emitted by the police car.
In this scenario, a police car is moving to the right at 27 m/s, and a speeder is approaching from behind at 36 m/s.
The police officer points a radar gun at the speeder, emitting an electromagnetic wave with a frequency of 7.5×10^9 Hz. The task is to find the difference between the frequency of the wave that returns to the police car after reflecting from the speeder's car and the frequency emitted by the police car.
The frequency of the wave that returns to the police car after reflecting from the speeder's car is affected by the relative motion of the two vehicles. This phenomenon is known as the Doppler effect.
In this case, since the police car and the speeder are moving relative to each other, the frequency observed by the police car will be shifted. The Doppler effect formula for frequency is given by f' = (v + vr) / (v + vs) * f, where f' is the observed frequency, v is the speed of the wave in the medium (assumed to be the same for both the emitted and reflected waves), vr is the velocity of the radar gun wave relative to the speeder's car, vs is the velocity of the radar gun wave relative to the police car, and f is the emitted frequency.
In this scenario, the difference in frequency can be calculated as the observed frequency minus the emitted frequency: Δf = f' - f. By substituting the given values and evaluating the expression, the difference in frequency can be determined.
Learn more about electromagnetic here: brainly.com/question/31038220
#SPJ11
Prob. 7-6 7-7. Determine the resultant internal loadings in the beam at cross sections through points D and E. Point E is just to the right of the 15-kN load. 15 kN 25 kN/m B E 2 m 2 m 1.5 m- -1.5 m Prob. 7-7 D C
At point D, the resultant internal loadings in the beam consist of a shear force of 15 kN and a bending moment of 40 kNm in the clockwise direction. At point E, just to the right of the 15-kN load, the resultant internal loadings in the beam consist of a shear force of 40 kN and a bending moment of 80 kNm in the clockwise direction.
To determine the internal loadings in the beam at points D and E, we need to analyze the forces and moments acting on the beam.
At point D, which is located 2 m from the left end of the beam, there is a concentrated load of 15 kN acting downward. This load creates a shear force of 15 kN at point D. Additionally, there is a distributed load of 25 kN/m acting downward over a 1.5 m length of the beam from point C to D. To calculate the bending moment at D, we can use the equation:
M = -wx²/2
where w is the distributed load and x is the distance from the left end of the beam. Substituting the values, we have:
M = -(25 kN/m)(1.5 m)²/2 = -56.25 kNm
Therefore, at point D, the resultant internal loadings in the beam consist of a shear force of 15 kN (acting downward) and a bending moment of 56.25 kNm (clockwise).
Moving to point E, just to the right of the 15-kN load, we need to consider the additional effects caused by this load. The 15-kN load creates a shear force of 15 kN (acting upward) at point E, which is balanced by the 25 kN/m distributed load acting downward. As a result, the net shear force at point E is 25 kN (acting downward). The distributed load also contributes to the bending moment at point E, calculated using the same equation:
M = -wx²/2
Considering the distributed load over the 2 m length from point B to E, we have:
M = -(25 kN/m)(2 m)²/2 = -100 kNm
Adding the bending moment caused by the 15-kN load at point E (clockwise) gives us a total bending moment of -100 kNm + 15 kN x 2 m = -70 kNm (clockwise).
Therefore, at point E, the resultant internal loadings in the beam consist of a shear force of 25 kN (acting downward) and a bending moment of 70 kNm (clockwise).
To know more about beam refer here:
https://brainly.com/question/31324896#
#SPJ11