Answer:
The final velocity of the motorcycle is 64.7 m/s
Note: Since the value for the acceleration of the motorcycle is not clear, it is assumed to be 4.55 m/s² in the calculation
Explanation:
Using the equation of motion that contains all the given values in the question: v² = u² + 2as
where v is final velocity; u is initial velocity; a is acceleration; s is horizontal distance
v = ?, u = 0 (since the motorcycle starts from rest), a = 4.55 m/s², s = 460 m
v² = 0² + 2 * 4.55 * 460
v² = 4186
take square root of both sides
v = 64.7 m/s
Therefore, the final velocity of the motorcycle is 64.7 m/s
Which of the following elements is a metalloid? A. phosphorus B. cobalt C. silicon D. magnesium
Answer: silicon
Explanation:it just is
Respuesta
es la C. silicio
Explanation:
No existe una definición estandarizada de elemento metaloide ni un consenso completo sobre los elementos que son metaloides.
En la clasificación de metaloides se suelen incluir a:
Boro (B)
Silicio (Si)
Germanio (Ge)
Arsénico (As)
Antimonio (Sb)
Telurio (Te)
What is a convection current (Be sure to include how temperature and density are involved.
Convection currents are flowing fluid that is moving because there is a temperature or density difference within the material. ... A temperature difference leads to an energy transfer from an area of higher energy to one of lower energy. Convection is a heat transfer process.
Who knows the answer to this please help
If the atomic number of an element is 16, what is the element's identity?
What is its atomic mass
Answer: The element is sulfur and the atomic mass is 32.07
Explanation: wasn’t sure what you were asking so gave you both
This is methane, Methane is gas that is found in small quantities in Earth's atmosphere. Methane is the simplest hydrocarbon,
consisting of one carbon atom and a powerful greenhouse gas. What is the chemical formula for methane?
A)
4CH
B)
C4H
C)
C4H4
D)
CH4
Answer:
CH4
Explanation:
I looked it up and took the test
Answer:
You go to K12?
Explanation:
Need help ASAP!!please
Help please! I’ll mark brainliest to who ever answers this first!!
Answer:
paleontologists is the answer to scientist who studies fossil
Transfer of heat through conduction can occur in which of the following?
A. Solids
B. Liquids
C. Gases
D. All of the above
I will pick the brainiest answer! Thanks! :)
1. What is the difference between a chemical and physical property?
2. Give examples of each one: a chemical property, a chemical change, a physical property, and a physical change
definition physical property can be observed or measured without changing the composition of matter
examples
color
density
volume
mass
definition
chemical A chemical property is a characteristic of a particular substance that can be observed in a chemical reaction. Some major chemical properties include flammability, toxicity, heat of combustion
examples flammability, toxicity, acidity, reactivity
pretty much the difference is is that chemical changes its chemical reaction involving the rearrangement of the atoms of one or more substances and a change in their chemical properties or composition, resulting in the formation of at least one new substance Physical change does not do that
please someone answer and help :)
A massless length of twine can withstand a maximum tension of 490 N. The twine is used to spin a 28-kg ball in horizontal circular motion of radius 1.8 m. The ball is spun faster and faster until the twine breaks. What was the maximum speed of the ball?
7.2 m/s
3.2 m/s
5.6 m/s
11 m/s
Answer:
5.6 m/s
Explanation:
If the temperature of a substance increases will the particles of that substance be moving faster or slower or at the same speed as they were before the temperature changed
Answer:
If the temperature increases, temperature reflects the speed of the molecules, so if the molecules are at a higher temperature, they are faster and they start to break bonds and new things react.
Explanation:
Beaux has purchased a synthetic material for a product he is launching. What is most likely a benefit of this material?
It is biodegradable.
It can be recycled cheaply.
It is heavy.
It can be mass produced.
Answer:
The answer is D. it can be mass produced
Explanation:
Answer:
The answer is D It can be mass produced.
Explanation:
I just took the test
What is one example of pre-exising marine life?
dinosaur egg
shrimp burrow
leaf imprint
bird bone
Answer:
Shrimp burrow
Explanation:
Shrimp are types of sea life, whales eat them
ummmm im in 2nd period and in test prep
Why do electrons falling into different orbits give off characteristics wavelengths?
Explanation:
Because the difference in energy between orbits is different in different types of atoms, moving electrons between different orbits requires photons carrying different amounts of energy (different wavelengths).
Adding or removing thermal energy causes a change in state of matter.
O True
O False
Answer:"You can change an object's state of matter by adding or removing thermal energy. When you add thermal energy to an object, these things can happen: Particles move faster (increased kinetic energy). Particles get farther apart (increased potential energy)."
Explanation:
Where do you find the Group 1 and Group 2 metals?
Answer:
far left
Explanation:
How many elements are found in 2CuSO4?
A.5
B.4
C.2
D.3
Answer:
d
Explanation:
the reason is you have Cu S and O
Jeremiah pushed Anthony with a net force of 12 N. Anthony accelerated across the hall at 0.2 m/s2. What was Anthony’s mass?
Answer:
6
Explanation:
Work Shown:
Force = Mass*Acceleration
F = ma
12 = m*0.2
12/0.2 = m
60 = m
m = 60 kilograms
how many moles of Fe(OH)2 are required to produce 7.4 moles of Fe3(PO4)2
Answer:
22.2 mol
Explanation:
Considering the reaction stoichiometry, 22.2 moles of Fe(OH)₂ are required to produce 7.4 moles of Fe₃(PO₄)₂.
The balanced reaction is:
3 Fe(OH)₂ + 2 H₃PO₄ → Fe₃(PO₄)₂ + 6 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Fe(OH)₂: 3 moles H₃PO₄: 2 molesFe₃(PO₄)₂: 1 mole H₂O: 6 moles
Then you can apply the following rule of three: if by reaction stoichiometry 1 mole of Fe₃(PO₄)₂ requires 3 moles of Fe(OH)₂, 7.4 moles of Fe₃(PO₄)₂ require how many moles of Fe(OH)₂?
[tex]amount of moles of Fe(OH)_{2} =\frac{7.4 moles of Fe_{3} (PO_{4} )_{2} x3moles of Fe(OH)_{2} }{1mole of Fe_{3} (PO_{4} )_{2} }[/tex]
amount of moles of Fe(OH)₂= 22.2 moles
Finally, 22.2 moles of Fe(OH)₂ are required to produce 7.4 moles of Fe₃(PO₄)₂.
Learn more:
brainly.com/question/16487206?referrer=searchResults brainly.com/question/14446695?referrer=searchResults brainly.com/question/11564309?referrer=searchResults brainly.com/question/4025026?referrer=searchResults brainly.com/question/18650135?referrer=searchResultsMass number is
O the average atomic mass of an element.
O the total number of electrons in an atom of an element.
O the total number of protons in an atom of an element.
O the total number of protons and neutrons in an atom of an element.
Answer:
4 th is the answer......
If 175 grams of lead (ll) iodide is produced from the reaction, how many moles of potassium nitrate are produced?
Equation: 2KI + Pb(NO₃)₂ = 2KNO₃ + Pbl₂
Moles of potassium nitrate produced : 0.76
Further explanationThe reaction equation is the chemical formula of reagents and product substances
A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.
Reaction
2KI + Pb(NO₃)₂ ⇒ 2KNO₃ + Pbl₂
MW KNO₃ : 101.1032 g/mol
MW Pbl₂ = 461,01 g/mol
175 grams of Pbl₂ , mol :
[tex]\tt mol=\dfrac{175}{461.01}=0.38[/tex]
mol ratio KNO₃ : Pbl₂ = 2 : 1, so mol KNO₃ = 0.38 x 2 = 0.76
Mass of KNO₃ :
[tex]\tt mass=0.76\times 101.1032=76.838~g[/tex]
2. Platinum metal has a density of 21.4 g/mL. If the block measures 3 cm, by 0.03 m, by 40 mm
how much does it weigh in milligrams?
Answer:
80mg
Explanation:
Given parameters:
Density of Platinum metal = 21.4g/mL
Dimension of the metal = 3cm by 0.03m by 40mm
Unknown:
Weight of the metal in milligrams?
Solution:
Density is the mass per unit volume of a substance.
Mathematically;
Density = [tex]\frac{mass}{volume}[/tex]
Volume of the platinum metal = l x w x h
Let us convert the dimension of the metal to the same unit;
3cm x 0.03m x 40mm
convert to cm;
100m = 1cm
0.03m = [tex]\frac{0.03}{100}[/tex] = 0.0003cm
-- 40mm;
1mm = 0.1cm
40mm = 40 x 0.1 = 4cm
Volume of the metal = 3 x 0.0003 x 4 = 0.0036cm³
1mL = 1cm³; so volume = 0.0036mL
Mass of the metal = 21.4 x 0.0036 = 0.08g
1g = 1000mg
0.08g = 0.08 x 1000 = 80mg
You can see protons yes or no
No. Not with the naked eye
Colour in acid of red litmus paper
Red
Litmus paper turn red when it comes in contact with acid. It turn blue if it come in contact with a base. Neutral litmus paper is purple
A student analyzed an unknown sample that contained a single anion. The sample gave a white precipitate upon addition of a solution of AgNO3 which dissolved in ammonia. Which anion is present in the unknown solution? Write the corresponding net ionic equation.
Answer:
Chloride ion
Explanation:
The anion present in the unknown solution would be chloride ions.
A white precipitate of silver chloride is usually formed when drops of silver nitrate are added to a solution containing chloride ions. The ionic equation is as below:
[tex]Cl^- (aq) + Ag^+ (aq) --> AgCl (s)[/tex]
What is the concentration of a solution of 10. Moles of copper nitrate in 5.0 liters of solution
Answer:
10.5
Explanation:
well we added together so thats the result
A man walks 20 meters in 10 seconds. What is the speed? *
Answer: 2m/s.
Explanation: To find a speed/rate, you use the equation d = r*t. We switch around this equation to get r = d/t. Then, we plug in the numbers. r = 20 meters/10 seconds. Thus, the rate/speed is 2 meters/second (2m/s).
A man walks 20 meters in 10 seconds the speed is 2 meters per second (m/s).
What is the speed?Speed is something to measure the intensity of anything like any object which is moving from one place to another place and can be calculated by dividing the traveled distance by the time taken by the object.
To calculate the speed of man the given values are distance and time 20 meters in 10 seconds respectively.
speed = distance / time
substituting the value in equation,
speed = 20/10
speed = 2 meter per second (m/s)
Therefore, a man walks 20 meters in 10 seconds the speed is 2 meters per second (m/s).
Learn more about speed, here:
https://brainly.com/question/7359669
#SPJ2
An object has a mass of 441 g and a volume
of 10 cm3. What is the density of the object
in g/cm3?
The density is the ratio of the mass to the volume. The density of the object is 44.1 g/cm³.
What is density?Density (ρ) is the quantitative measurement of the substance having grams of mass that are dissolved per cubic meter of the solution. The density is calculated as:
ρ = M ÷ V
Given,
Mass of the object = 441 gm
The volume of the object = 10 cubic meter
Density is calculated as:
ρ = 441 ÷ 10
= 44.1 g/cm³
Therefore, 44.1 g/cm³ is the density of the object.
Learn more about density here:
https://brainly.com/question/952755
#SPJ1