Write a story about a family who uses a solar cooker and to stay healthy and safe.
Answers
Related Questions
Describe particle movement in solid,liquid and gas
Answers
Answer:
In a solid, they're really close together and vibrate a LITTLE, in a liquid they're kinda close together but change movement because water will change shape depending on the container they're in. For gas they are spread far from each other and vibrate A LOT
Explanation:
The EPA sets national air-quality standards for common air pollutants. The
graph shows the change in the concentrations of these pollutants over time.
Which conclusion do the data in the graph support?
A Concentrations of all pollutants have decreased.
B. Monitoring concentrations of pollutants is too expensive.
O C. Concentrations of all pollutants have increased.
O D. Monitoring concentrations of pollutants has been ineffective.
Answers
Answer:
A
Explanation:
Just took the quiz
The irregularity of the chart means that, monitoring concentrations of pollutants has been ineffective.
What is the EPA?The EPA is the environmental protection agency which takes care of the set limits of pollutamts that are released into the environment. The chart shows the monitoring of the concentrations of pollutants over a period of time.
We can see tat the chart is so irregular. The irregularity of the chart means that, monitoring concentrations of pollutants has been ineffective.
Learn more about EPA: https://brainly.com/question/365923
please tell me answers I am given you brainliest
Answers
Answer:
1 = one
2 = fluorine
3 = Bromine
4 = increase
5 = first increaseas and then decreases
hope it helps
What is the main purpose of the excretory system?
Question 6 options:
To cause movement of the body
To respond to stimuli
To transport nutrients
To remove waste products
Answers
Answer:
To remove waste products
Explanation:
I think
Answer:
to remove waste products
How many moles each element are in a mole of methane?
Answers
[tex] \large \mathcal{ANSWER}[/tex]
This means that the mass of one methane molecule is 12.011 u + (4 × 1.008u), or 16.043 u. This means that one mole of methane has a mass of 16.043 grams. A mole can be thought of as two bags of different sized balls. One bag contains 3 tennis balls and the other 3 footballs.
Samples of helium (He), nitrogen (N 2 ), and methane (CH 4 ) are at STP. Each contains 1 mole or 6.02 × 10 23 particles. However, the mass of each gas is different and corresponds to the molar mass of that gas: 4.00 g/mol for He, 28.0 g/mol for N 2 , and 16.0 g/mol for CH 4 .
What size volumetric flask would you use to create a 1.25 M solution using 29.75 g of MgCl2?
Answers
Answer:
250 ml
Explanation: I got it right on the lab.
The size of the volumetric flask that would you use to create a 1.25 M solution using 29.75 g of MgCl₂ is 250mL.
How do we calculate volume of the solution?
Volume (V) in liter of the solution will be calculated by using the molarity (M) formula as:
M = n/V, where
n is the moles of the solute and it will be calculated by using mass as:
n = W/M, where
W = given mass
M = molar mass
Moles of 29.75g of MgCl₂ = 29.75g / 95g/mol = 0.313 mol
Given that molarity of solution = 1.25M
On putting values on the equation of molarity we will get the value of volume as:
V = 0.313 / 1.25 = 0.2504 L = 250mL
For the preparation of 250 mL of MgCl₂ solution we required the volumetric flask of 250 mL.
Hence volumetric flask of 250mL is required.
To know more about volumetric flask, visit the below link:
https://brainly.com/question/24196698
#SPJ2
Which figures are not significant? *
trailing zeros to the left of an invisible decimal point
leading zeros to the right of a decimal point
leading zeros to the left of a decimal point
all of the above
none of the above
Answers
Answer:
leading zeroes to the left of a decimal point. and trailing zeros to the left of an invisible decimal point.
Explanation:
All nonzero digits are significant figures. Example: 713 has three significant figures. 18,991 has five significant figures.Zeros located between two nonzero digits are significant figures. Example: 505 has three significant figures. 17,009 has five significant figures.Zeros at the ends of numbers are only significant if there is a decimal point in the number. Example: 502.00 has five significant figures (5,0,2,0,0). 5020 has three significant figures (5,0,2) 100,000 has one significant figure (1)Zeros that come before the first nonzero digit are not significant. Example: 0.0007 has one significant figure (7). 0.0970 has three significant figures (9,7,0)1. How are atoms held together? What is the attraction between?
Answers
Answer:
the atom is held together by the electrostatic attraction between the positively charged nucleus and the negatively charged electrons surrounding it, the stability within chemical bonds is also due to electrostatic attractions.
Explanation:
Answer:
Some type of bond (example: hydrogen bonds between water)
Polarity can also hold atoms together
hope this Helped!
Which statement gives two characteristics of all liquids?
They spread out to fill space and have atoms that vibrate in place.
They have atoms that vibrate in place and have a definite shape.
They will change shape to fit a container and have definite volume.
They have definite volume and have atoms that move freely in all directions.
Answers
Answer:
C
Explanation:
2NaHCO3 + 3CaCl2 → CaCO3 + 2NaCl + H2O + CO2
Which statement is true about the equation above?
There are 3 chlorines on the reactant side and 3 chlorines on the product side of this equation.
There are 3 chlorines on the reactant side and 3 chlorines on the product side of this equation.
There are 3 calciums on the reactant side and 2 calciums on the product side of this equation.
There are 3 calciums on the reactant side and 2 calciums on the product side of this equation.
There are the same number of oxygen atoms in the reactants and the products. There are the same number of oxygen atoms in the reactants and the products.
This equation does not follow the law of conservation of mass.
Answers
Answer:
There are the same number of oxygen atoms in the reactants and the products
Explanation:
However the equation is not balanced
3 Ca on one side and 1 on the other
24) Which of these lists the order of sublevels by INCREASING energy? *
3d, 4s, 4p
4s, 3d, 4p
4p, 3d, 4s
4s, 4p, 3d
Answers
Answer:
4s, 3d, 4p
Explanation:
(3d,4s,4p) and (4p, 3d, 4s) both are decreasing energy, while (4s,4p,3d) is incorrect order it should be (4s,3d,4p).
(SCIENCE) HURRY HELP!!
Anabolic steroids are especially dangerous for teenagers whose bones are still growing.
true or false
Answers
Answer:
True
Explanation:
Generally makes sense.
What is the best description of the results of a chemical reaction
Answers
Answer:
the final reaction
Explanation:
a chemical reaction is caused from the two reactants
What’s the answer????
Answers
Answer:
1. C
2. A
3. A
Explanation:
how do we know that all the continents were all together at one point in time. writing prompt and it has to be at least 7 sentences
Answers
Answer:
We can tell by how the continents look. Scientists who propose the pangea theory have said this. You can see for yourself because all the continents look like puzzle pieces you could put together. Scientists can also tell from the species. For example, let's say a scientist found a bone of a creature at the edge of a continent, the edge of another would have the same species. They have also calculated that the continents in itself are still splitting apart, but very slowly. The reason they split up was because tectonic plate movements.
Why are constellations and predictable locations in the night sky but planets are hard to find
Answers
Answer:
Because you can see the stars everynight pretty much, but the planets you need a telescope for. Plus, the planets are moving everynight making night and day so they all move! :)
Explanation:
Hope this helps! Brainliest plz?
please if you know help
the formula of copper sulfate crystals is CuSo4.5H2O. 400ml of 0.02mol/l copper (ii) sulfate solution is needed to be prepered .
a. calculate the molar mass of the solute .
b. calculate the mass of the solute that sould be weighted to prepare this solution .
c. describe in details the steps of preperation of the solution
Answers
Answer: a. 249.5 g/mol
b. 1.996 g
c. Measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve in water until the volume is 400 ml
Explanation:
Molar mass is the sum of atomic masses of all the elements present.
Thus molar mass of [tex]CuSO_4.5H_2O[/tex] = 1(63.5)+1(32)+4(16)+5(18) = 249.5 g/mol
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{given mass of solute}\times 1000}{\text {Molar mass of solute}}\times \text{Volume of solution in ml}}[/tex]
[tex]0.02mol/L=\frac{x\times 1000}{249.5g/mol\times 400}[/tex]
[tex]x=1.996 g[/tex]
c. We need to measure 1.996 g of [tex]CuSO_4.5H_2O[/tex] and dissolve it in water to make the volume 400 ml.
Shown above is information about the dissolution of AgCl(s) in water at 298K. In a chemistry lab a student wants to determine the value of s, the molar solubility of AgCl, by measuring [Ag+] in a saturated solution prepared by mixing excess AgCl and distilled water. How would the results of the experiment be altered if the student mixed excess AgCl with tap water (in which [Cl−]=0.010M) instead of distilled water and the student did not account for the Cl− in the tap water?
Answers
Answer:
Value for K would be too small. Less AgCl would dissolve due to the common ion effect due to the presence of Cl- in the water.
Explanation:
Think of this through the lenses of a shifting problem. Cl- ions are a product in this situation and increasing its concentration would shift the reaction back to the solid AgCl. In this specific case, due to Cl- ions, AgCl would dissolve less to maintain equilibrium and as a result, the concentrations of Ag+ and Cl- ions would be lower than normal making a smaller K value.
In the solution of AgCl in tap water, the dissociation constant K has been decreased.
The dissolution of silver chloride in water results in the formation of silver ions and chloride ions.
The dissociation constant has been the amount of compound that has been dissociated into the constituent ions at equilibrium.
Dissociation constant for AgClThe dissociation constant has been dependent on the number of ions in the solution that has been present.
The common ion effect has been defined as the change in the dissociation constant for the compound with the presence of common ions in the solution.
The dissociation of AgCl in tap water has been resulted with presence of Cl ions in the solution. There has been early reach to the equilibrium in tap water.
Thus, with the solution of AgCl in tap water, the dissociation constant K has been decreased.
Learn more about dissociation constant, here:
https://brainly.com/question/7145687
An alloy of sodium and potassium is used as a coolant due to its
A.high thermal conductivity
B.physical state
C.high reactivity
D.all except c
Answers
Answer:
A
Explanation:
Because It's dense meaning that it doesn't burn
Explanation:
https://youtu.be/f_kgUUaMZlw
What’s the answer???
Answers
Answer:
Well I know that the first one is true.
Explanation:
Answer:
1. TRUE
2. FALSE
3. C
Explanation:
is Nb6+ a oxidizing agent?
Answers
Answer:
yes
Explanation:
because of high positive charge of Nb6+ delta G is more negative for Nb6+ as an oxidising agent♡
Answer:
So Sn2+ is a reducing agent (oxidises itself to Sn4+ hence becoming stable) while Pb2+ is already stable so it neither undergoes oxidation nor reduction.
Hey.... If I got a question in my exams of which metal does not react with hydrochloric acid and I write gold as the answer, will I get full marks on that questiona dn the whole exam paper in total????
Answers
Answer:
I think you would pretty much get the answer wrong.
You won´t get full credit. sorry for your wrong test answer, :(
Explanation:
The correct answer would be copper and mercury do NOT react with hydrochloric acid.
How do the terms denature, catalyst, active site, and substrate relate to each other
Answers
Explanation:
The enzyme 's active site binds to the substrate. Increasing the temperature generally increases the rate of a reaction, but dramatic changes in temperature and pH can denature an enzyme, thereby abolishing its action as a catalyst. ... When an enzyme binds its substrate it forms an enzyme-substrate complex.
friend,please mark my answer in brainliest answersfriend,please follow me friend,please thanks this answerfriend,please vote it 5 starname the following compound Mol2
Answers
Answer:
you cant answer this
Explanation:
you left something out of the question
how to round the decimal 4.15 to the hundredths place?
Answers
Answer:4.15 is already in the hundreths place so you are good!
if it was 4.155 then you would round it to 4.16 but its NOT that so the answer IS 4.15
Explanation:
The rock in a particular iron ore deposit contains 78% Fe2O3 by mass. How many kilograms of the rock must a mining company process to obtain 1.0 x 103 kg of iron?
Answers
Answer:
103 so easy so free dogwater
Explanation:
Mass percentage does not have any unit as numerator and denominator contains the same unit. The mass of rock is 2.56×10⁶g when it contains 1.0 x 10³ kg of iron in it.
What is percentage by mass?Mass percentage represents the the percentage of each element that is making a particular compound.
Mathematically,
Percentage of mass = (component’s mass ÷ total mass) x 100%
Percentage of mass of ferric oxide is = 78% by mass in rock
From this we can interpret the following
100 g of rock contains = 78gram ferric oxide
(100÷78)g of rock contains= 1 gram of ferric oxide
mass of iron in rock =1.0 x 10³ kg = 1.0 x 10⁶ g
(100÷78)×1.0 x 10⁶ g of rock = 1.28×10⁶g of ferric oxide
now 1 mole of ferric oxide contains 2 atoms of iron, so the total mass of iron is 1.28×10⁶g ×2=2.56×10⁶g of iron.
Therefore the mass of rock is 2.56×10⁶g when it contains 1.0 x 10³ kg of iron in it.
To learn more about mass percentage, here:
https://brainly.com/question/27429978
#SPJ2
The four balls in the diagram below are made of the same material and are solid.
Pair 1
Pair 2
Why is the force of gravity between the balls in Pair 2 greater than the force of gravity between the balls in Pair 12
PI
The balls in Pair 2 are closer together than the balls in Pair 1.
The balls in Pair 2 have a greater mass than the balls in Pair 1.
O The balls in Pair 1 have more rolling friction than the balls in Pair 2.
The balls in Pair 1 have more magnetic force than the balls in Pair 2.
Hidden
Ops
Answers
Answer:
The balls in Pair 2 have a greater mass than the balls in Pair 1.
On the periodic table, what is a group? For the main groups, what characteristic
do the elements have in common?
Answers
In modern times, we know that the elements in a given group (also known as a family or column) have the same number of valence electrons, with ground state configurations having a consistent pattern, for instance:
F 1s2 2s2 2p5, Cl 1s2 2s2 2p6 3s2 3p5, Br 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p5, etc.
Of course, the ground state configurations play a major role in determining how an element reacts and what compounds it forms. Thus, the elements in a given group have similar properties.
The structure of the table also predicts how the properties vary. For instance, atomic radius increases down a group as does metallic character.
Hope this helps have a awesome day/night✨Explanation:
How would you calculate an object’s mechanical energy?
Answers
Kinetic energy + potential energy
Hope this helped!
Which of the following will dissolve most rapidly?
A) Sugar cubes in cold water
B) powdered sugar in hot water
C) powdered sugar in cold water
D) sugar cubes in hot water
Answers
Answer:
The correct answer to your Question is B.
Explanation:
Hope you have a great day :)
The substance from the options that will dissolve most rapidly is : ( B ) Powdered sugar in hot water.
Factors responsible for solubilityIncrease in temperature, state of solute and volume will determine the rate at which solubility occurs. The powdered sugar is in less solid state when compared to sugar cubes and therefore will dissolve most rapidly in hot water than a sugar cubes in hot water.
Hence we can conclude that The substance from the options that will dissolve most rapidly is : ( B ) Powdered sugar in hot water.
Learn more about solubility : https://brainly.com/question/23946616
#SPJ2