with what minimum speed must you toss a 190 g ball straight up to just touch the 11- m -high roof of the gymnasium if you release the ball 1.1 m above the ground? solve this problem using energy.

Answers

Answer 1

To solve this problem using energy considerations, we can equate the potential energy of the ball at its maximum height (touching the roof) with the initial kinetic energy of the ball when it is released.

The potential energy of the ball at its maximum height is given by:

PE = mgh

Where m is the mass of the ball (190 g = 0.19 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the maximum height (11 m).

The initial kinetic energy of the ball when it is released is given by:

KE = (1/2)mv^2

Where v is the initial velocity we need to find.

Since energy is conserved, we can equate the potential energy and initial kinetic energy:

PE = KE

mgh = (1/2)mv^2

Canceling out the mass m, we can solve for v:

gh = (1/2)v^2

v^2 = 2gh

v = sqrt(2gh)

Plugging in the values:

v = sqrt(2 * 9.8 m/s^2 * 11 m)

v ≈ 14.1 m/s

Therefore, the minimum speed at which the ball must be tossed straight up to just touch the 11 m-high roof of the gymnasium is approximately 14.1 m/s.

Learn more about Kinetic Energy

brainly.com/question/15764612

#SPJ11


Related Questions

Identify the correct statement. For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent-divergent nozzle. O A gas can always expand isentropically from subsonic to supersonic speeds, independently of the geometry O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent nozzle. O For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a divergent nozzle.

Answers

The correct statement is: "For a gas to expand isentropically from subsonic to supersonic speeds, it must flow through a convergent-divergent nozzle."

When a gas is flowing at subsonic speeds and needs to accelerate to supersonic speeds while maintaining an isentropic expansion (constant entropy), it requires a specially designed nozzle called a convergent-divergent nozzle. The convergent section of the nozzle helps accelerate the gas by increasing its velocity, while the divergent section allows for further expansion and efficient conversion of pressure energy to kinetic energy. This design is crucial for achieving supersonic flow without significant losses or shocks. Therefore, a convergent-divergent nozzle is necessary for an isentropic expansion from subsonic to supersonic speeds.

Learn more about supersonic speeds

https://brainly.com/question/32278206

#SPJ11

Show that the free-particle one-dimensional Schro¨dinger
equation for the wavefunc-
tion Ψ(x, t):
∂Ψ
i~
∂t = −
~
2
2m


,
∂x2
is invariant under Galilean transformations
x
′ = x −
3. Galilean invariance of the free Schrodinger equation. (15 points) Show that the free-particle one-dimensional Schrödinger equation for the wavefunc- tion V (x, t): at h2 32 V ih- at is invariant u

Answers

The Galilean transformations are a set of equations that describe the relationship between the space-time coordinates of two reference systems that move uniformly relative to one another with a constant velocity. The aim of this question is to demonstrate that the free-particle one-dimensional Schrodinger equation for the wave function ψ(x, t) is invariant under Galilean transformations.

The free-particle one-dimensional Schrodinger equation for the wave function ψ(x, t) is represented as:$$\frac{\partial \psi}{\partial t} = \frac{-\hbar}{2m} \frac{\partial^2 \psi}{\partial x^2}$$Galilean transformation can be represented as:$$x' = x-vt$$where x is the position, t is the time, x' is the new position after the transformation, and v is the velocity of the reference system.

Applying the Galilean transformation in the Schrodinger equation we have:

[tex]$$\frac{\partial \psi}{\partial t}[/tex]

=[tex]\frac{\partial x}{\partial t} \frac{\partial \psi}{\partial x} + \frac{\partial \psi}{\partial t}$$$$[/tex]

=[tex]\frac{-\hbar}{2m} \frac{\partial^2 \psi}{\partial x^2}$$[/tex]

Substituting $x'

= [tex]x-vt$ in the equation we get:$$\frac{\partial \psi}{\partial t}[/tex]

= [tex]\frac{\partial}{\partial t} \psi(x-vt, t)$$$$\frac{\partial \psi}{\partial x} = \frac{\partial}{\partial x} \psi(x-vt, t)$$$$\frac{\partial^2 \psi}{\partial x^2} = \frac{\partial^2}{\partial x^2} \psi(x-vt, t)$$[/tex]

Substituting the above equations in the Schrodinger equation, we have:

[tex]$$\frac{\partial}{\partial t} \psi(x-vt, t) = \frac{-\hbar}{2m} \frac{\partial^2}{\partial x^2} \psi(x-vt, t)$$[/tex]

This shows that the free-particle one-dimensional Schrodinger equation is invariant under Galilean transformations. Therefore, we can conclude that the Schrodinger equation obeys the laws of Galilean invariance.

To know more about transformation visit:-

https://brainly.com/question/15200241

#SPJ11

Other Questions
Question 3 Which of the following statements is true of the male reproductive system? A The interstitial (Leydig) assist in sperm formation B The testes are temperature sensitive for optimal sperm pro Design a excel file of an hydropower turgo turbine in Sizing and Material selection.Excel file must calculate the velocity of the nozel, diameter of the nozel jet, nozzle angle, the runner size of the turgo turbine, turbine blade size, hub size, fastner, angular velocity,efficiency,generator selection,frequnecy,flowrate, head and etc.(Note: File must be in execl file with clearly formulars typed with all descriptions in the sheet) Which of the following is a risk factor in Endocarditis Infecciosa (IEC?a. dental manipulationsb. prosthetic heart valvesc. infectious diseasesd. congenital heart diseasee. intravenous drug addicts deposited uniformly on the Silicon(Si) substrate, which is 500um thick, at a temperature of 50C. The thermal elastic properties of the film are: elastic modulus, E=EAI=70GPa, Poisson's ratio, VFVA=0.33, and coefficient of thermal expansion, a FaA=23*10-6C. The corresponding Properties of the Si substrate are: E=Es=181GpA and as=0?i=3*10-6C. The film-substrate is stress free at the deposition temperature. Determine a) the thermal mismatch strain difference in thermal strain), of the film with respect to the substrate(ezubstrate e fim) at room temperature, that is, at 20C, b)the stress in the film due to temperature change, (the thickness of the thin film is much less than the thickness of the substrate) and c)the radius of curvature of the substrate (use Stoney formula) 4) Disc brakes are used on vehicles of various types (cars, trucks, motorcycles). The discs are mounted on wheel hubs and rotate with the wheels. When the brakes are applied, pads are pushed against the faces of the disc causing frictional heating. The energy is transferred to the disc and wheel hub through heat conduction raising its temperature. It is then heat transfer through conduction and radiation to the surroundings which prevents the disc (and pads) from overheating. If the combined rate of heat transfer is too low, the temperature of the disc and working pads will exceed working limits and brake fade or failure can occur. A car weighing 1200 kg has four disc brakes. The car travels at 100 km/h and is braked to rest in a period of 10 seconds. The dissipation of the kinetic energy can be assumed constant during the braking period. Approximately 80% of the heat transfer from the disc occurs by convection and radiation. If the surface area of each disc is 0.4 m and the combined convective and radiative heat transfer coefficient is 80 W/m K with ambient air conditions at 30C. Estimate the maximum disc temperature. Reaction of antigen with IgE antibodies attached to mast cells causes a. Complement fixation. b. Agglutination. c. Lysis of the cells. d. Release of chemical mediators. e. None of these Question 11For the 3-class lever systems the following data are given:L2=0.8L1 = 420 cm; = 4 deg; 0 = 12 deg; Fload = 1.2Determine the cylinder force required to overcome the load force (in Newton) I have found a research study online with regards to PCM or Phase changing Material, and I can't understand and visualize what PCM is or this composite PCM. Can someone pls help explain and help me understand what these two composite PCMs are and if you could show images of a PCM it is really helpful. I haven't seen one yet and nor was it shown to us in school due to online class. pls help me understand what PCM is the conclusion below is just a part of a sample study our teacher gave to help us understand though it was really quite confusing, Plss help. ConclusionsTwo composite PCMs of SAT/EG and SAT/GO/EG were prepared in this article. Their thermophysical characteristic and solar-absorbing performance were investigated. Test results indicated that GO showed little effect on the thermal properties and solar absorption performance of composite PCM. However, it can significantly improve the shape stability of composite PCM. The higher the density is, the larger the volumetric heat storage capacity. When the density increased to 1 g/ cm3 , SAT/EG showed severe leakage while SAT/GO/EG can still keep the shape stability. A novel solar water heating system was designed using SAT/GO/EG (1 g/cm3 ) as the solar-absorbing substance and thermal storage media simultaneously. Under the real solar radiation, the PCM gave a high solar-absorbing efficiency of 63.7%. During a heat exchange process, the temperature of 10 L water can increase from 25 C to 38.2 C within 25 min. The energy conversion efficiency from solar radiation into heat absorbed by water is as high as 54.5%, which indicates that the novel system exhibits great application effects, and the composite PCM of SAT/GO/EG is very promising in designing this novel water heating system. 2. State whether decreasing the amount of oxygen (02) in inhaled air increased, reduced or did not change arterial carbon dioxide partial pressure from ordinary. 3. State whether decreasing the amount of O, in inhaled air increased, decreased or did not change plasma pH from normal. Which of the following statements is TRUE about transcriptioninitiationcomplexes required by eukaryotic RNA Polymerase Il?O a. TFIlD recognizes and binds multiple promoter elementsO b. Mediator ha A ten-year bond with a $2,000 face value pays a $60 coupon every six months. If the current market rate is 8%, find the fair market value of this bond. The fair-market value of the bond is $ A mesh of 4-node pyramidic elements (i.e. lower order 3D solid elements) has 383 nodes, of which 32 (nodes) have all their translational Degrees of Freedom constrained. How many Degrees of Freedom of this model are constrained? Suggest a promotional campaign to be carried out by PIZZA HUT to reflect the core change that will be incorporated to its marketing strategy (as suggested by your answer in question 6). Make sure to outline (a) the chosen channel (b) what kind of content will be presented to the customers using this channel, and (c) what segmentation strategy will be used for this marketing campaign search for a EIS reflecting the EIA study and related conditions.EIS of of development Mining.Student is supposed to summaries the findings under the each of the following categoreProject description, significance, and purposeAlternatives considered.Projects activities and related activities to the project (access road, connection to electricity, waste etc.Decommissioning and remediation.Legal conditions (policies governing the EIA activities)Basic environmental conditions. (What categories has the project covered)Methods of Impact assessment. (How did the EIA team assess the impact on baseline data)Management and monitoring planRisk assessment / mitigation measures/ impact reduction.Public Consultation. A patient who is suffering from chronic obstructive pulmonarydisease has decreased oxygen saturation. Describe the changes thatwill occur in the blood composition due to this and explain whatproble the half-life of radium-226 is 1600 years. Suppose you have a 20-mg sample. How much of the sample will remain after 4000 years? Round to 4 decimal places. 3. Consider a 7-DOF system with mass matrix [M] and stiffness matrix [K]. A friend has discovered three vectors V, V and V3 such that VT[M]V = 0 VT[K]V = 0 forij. Has your friend found 3 eigenvectors of the system? Do you need any more information? What else can you tell your friend about these vectors? Cellular respiration connects the degradation of glucose to the formation of ATP, NADH and FADH2 in a series of 24 enzymatic reactions. Describe the major benefit of breaking down glucose over so many individual steps and describe the main role of NADH and FADH2 5. You are following a family that has a reciprocal translocation, where a portion of one chromosome is exchanged for another, creating hybrid chromosomes. In some cases of chronic myelogenous leukemia, patients will have a translocation between chromosome 9 and 22, such that portions of chromosomes 9 and 22 are fused together. You are choosing between performing FISH and G-banding, which technique is best used to find this translocation, and why did you choose this technique?6. What type of nucleotide is necessary for DNA sequencing? How is it different structurally from a deoxynucleotide, and why is this difference necessary for sequencing? Below is a Sequencing gel. Please write out the resulting sequence of the DNA molecule. Blue = G, Red C, T=Green, A = Yellow (Please see below for the gel). find the vertex of y=(x+3)2+17