Answer:
Metaphase
Explanation:
During metaphase,chromosome line up in the middle of the cell.
A pyrotechnical expert needs to fire a 15 kg projectile from a launching device that has a barrel length of 2 meters. The projectile will need to be launched horizontally 1 km in 5 seconds. Calculate the force needed to launch the projectile.
Answer:
The force needed to launch the projectile is 150000 N.
Explanation:
We can find the force using the following equation:
[tex] F = ma [/tex]
Where:
m: is the mass = 15 kg
a: is the acceleration
First, we need to find the acceleration of the projectile:
[tex] v_{f}^{2} = v_{0}^{2} + 2ax [/tex]
Where:
[tex]v_{f}[/tex]: is the final speed
[tex]v_{0}[/tex]: is the initial speed = 0
x: is the distance = 2 m
The final speed is:
[tex]v_{f} = \frac{1 km}{5 s}*\frac{1000 m}{1 km} = 200 m/s[/tex]
Then, the acceleration is:
[tex]a = \frac{v_{f}^{2}}{2x} = \frac{(200 m/s)^{2}}{2*2 m} = 10000 m/s^{2}[/tex]
Finally, the force is:
[tex]F = ma = 15 kg*10000 m/s^{2} = 150000 N[/tex]
Therefore, the force needed to launch the projectile is 150000 N.
I hope it helps you!
What fonts do you use to create color coded lyrics
Where does digestion begin?
Answer:
Digestion begins in the mouth, when you chew.
A boat starts moving across a river at velocity v perpendicular to the river bank.
The boat encounters a current along the river of velocity u, as shown.
u
river
Which vector diagram shows the resultant velocity r of the boat?
A
B
с
D
u
A
r
u
Which is a characteristic of a physical change? (1 point)
a
The chemical bonds in the substance are unchanged.
b
The change cannot be seen.
c
The molecules all move at the same speed.
d
The substance has reacted with another substance.
Why is an important to come up with a plan for how are you to respond to negative peer pressure before the situation happens
A: it is hard to refuse in the situation if you have not decided how you would handle it ahead of time
B: because it is very likely you will face these situation in the future
C: both a and b
Answer:
C ( is hard to refuse in the situation if you have not decided how you would handle it ahead of time
B: because it is very likely you will face these situation in the future)
Which term best explains why you hear an echo?
Answer:
reflection
Explanation:
Answer:
reflection
Explanation:
A p e x
How much air resistance acts on a 100-N bag of nails that falls at its terminal speed?
True or False: A cloud’s only purpose is to create precipitation.
Answer:
I think it's false
Explanation:
clouds also help regulate the Earth's energy balance by reflecting and scattering solar radiation and by absorbing the Earth's infrared radiation.
Answer:
false
Explanation:
A car’s velocity changes from 35 m/s to stopped in 13 seconds. Calculate
acceleration.
Answer:
Acceleration = 3m/s^2
Vf= 0 Vi =35m/s t= 13s
Explanation:
[tex]Acceleration = \frac{Change in velocity}{Change in time}\\ = \frac{35m/s}{13s}\\ a = 2.69m/s^2\\ a = 2.7m/s^2\\ a = 3m/s^2[/tex]
A 1800 kg car moves along a horizontal road at speed v₀ = 18.4 m/s. The road is wet, so the static friction coefficient between the tires and the road is only µ static = 0.188 and the kinetic friction coefficient is even lower, µ kinetic = 0.1316. The acceleration of gravity is 9.8 m/s². What is the shortest possible stopping distance for the car under such conditions? (neglect the reaction time of the driver and round your answer to 4 decimal places)
Answer:
The shortest possible distance is [tex]|s| = 91.9 \ m[/tex]
Explanation:
From the question we are told that
The mass of the car is [tex]m = 1800 \ kg[/tex]
The speed along the horizontal road is [tex]v_o =u = 18.4 \ m/s[/tex]
The static friction coefficient is [tex]\mu_s = 0.188[/tex]
The kinetic friction coefficient is [tex]\mu_k = 0.1316[/tex]
Generally the static frictional force acting on the car is mathematically represented as
[tex]F_f = m * g * \mu_s[/tex]
Generally the force propelling the car is mathematically represented as
[tex]F = m * a[/tex]
Here a is the maximum acceleration
at the point which the car stops ,
[tex]F = F_f[/tex]
=> [tex]m * g * \mu_s = ma[/tex]
=> [tex]g * \mu_s =a[/tex]
=> [tex]a = 9.8 * 0.188[/tex]
=> [tex]a = 1.8424 \ m/s^2[/tex]
Generally from kinematic equation
[tex]v^2 = u^2 + 2as[/tex]
Here v is the final velocity of the car and the value is zero given that the car comes to rest
So
[tex]0^2 = 18.4^2 + 2* 1.8424 s[/tex]
=> [tex]s = - \frac{18.4^2}{2 * 1.8424}[/tex]
=> [tex]|s| = 91.9 \ m[/tex]
The transfer of heat by the movement of a fluid is called: Think about it: Imagine a pocket of air over the land (“land air”), and another pocket of air over the ocean (“ocean air”).
Which air pocket would you expect to heat up more during the day?
Why?
Answer:
The transfer of heat by the movement of fluid is called Convection Heat Transfer
Explanation:
Heat transfer by convection is the transfer of heat by fluid transport from one place to another, such that convection takes place when the heat that comes in contact of fluid containing body is moved to other parts of the container by the transporting fluid
Heat is transferred within a fluid medium mainly by convection (movement of heat by the transfer of fluid particles in the medium)
Convection heat transfer is a combination of conduction and advection heat transfer
A 1500 kg car is parked at the top of a hill 5.2 m high. What is the velocity of the car, in meters per second, when it reaches the bottom of the hill?
Answer:
Explanation:
The car will fall with acceleration due to gravity which is equal to 9.8 m /s²
For downward fall ,
initial velocity u = o
acceleration due to gravity = g = 9.8 m /s
final velocity v = ?
displacement h = 5.2 m
v² = u² + 2 gh
v² = 0 + 2 x 9.8 x 5.2
= 101.92
v = 10.1 m /s
gold has a density of 19300 kg/m3 calculate the mass of 0.02m3 of gold in kilograms
Mass if a substance is the product of its volume and density. The mass of gold of 0.02 m³ with a density of 19300 kg/m³ is 386 kg.
What is density?Density of a substance is the measure of its mass per unit volume. Thus, it says how much denser the object is in a given volume. Density of a substance is dependent on its bond type, temperature and pressure beside the volume and mass.
Volume can be defined as the space occupied by the substance. Larger the volume , less dense the substance is. However as the mass increases volume also increases.
Mass of an object is the product of its volume and density.
Given the volume of gold = 0.02 m³
density = 19300 kg/m³.
mass = volume × density
= 0.02 m³ × 19300 kg/m³
= 386 kg
Therefore, the mass of gold is 386 Kg.
To find more on gold, refer here:
https://brainly.com/question/11405288
#SPJ6
Question 7 (2 points)
Rachel performed an experiment testing the hours students slept with their
performance on a test. In this experiment, the hours that they slept was the_____ variable, while the grade they got on
the test was the
_____ variable.
What is Newtons third law of motion?
Answer:
His third law states that for every action (force) in nature there is an equal and opposite reaction. Explanation:
Answer:
His third law states that for every action (force) in nature there is an equal and opposite reaction
Explanation:
In other words, if object A exerts a force on object B, then object B also exerts an equal and opposite force on object A. Notice that the forces are exerted on different objects.
A standing wave has a frequency of 471 Hz and a wavelength of 1.9. What is the speed of the
wave? (Round to the 2nd number after the decimal)
1
I REALLY NEED HELP !
Answer:
c = 894.90 m/s
Explanation:
Given data:
Frequency of wave = 471 Hz
Wavelength of wave = 1.9 m
Speed of wave = ?
Solution:
Formula:
Speed of wave = frequency × wavelength
c = f×λ
c = 471 Hz × 1.9 m
Hz = s⁻¹
c = 471s⁻¹ × 1.9 m
c = 894.90 m/s
The speed of wave is 894.90 m/s.
A +4.0 uC charge is placed on the x axis at x= +3.0 m, and a -2.0 uC is located on the y-axis at y= -1.0 m. Point A is on the y axis at y= +4.0 m. Determine the electric potential at point A (relative to zero at the origin).
Answer:
The potential is [tex]V_A = 9600 \ V[/tex]
Explanation:
From the question we are told that
The magnitude of the charge is [tex]q_1 = 4 \mu C = 4*10^{-6} \ C[/tex]
The position of the charge is [tex]x = + 3.0 \ m[/tex]
The magnitude of the second charge is [tex]q_2 = -2.0 \mu C = -2.0 *10^{-6} \ C[/tex]
The position is [tex]y_1 = - 1.0 \ m[/tex]
The position of point A is [tex]y_2 = + 4.0 \ m[/tex]
Generally the electric potential at A due to the first charge is mathematically represented as
[tex]V_a = \frac{k * q_1 }{r_1 }[/tex]
Here k is the coulombs constant with value [tex]k = 9*10^{9} \ \ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}[/tex]
[tex]r_1[/tex] is the distance between first charge and a which is mathematically represented as
[tex]r_1 = \sqrt{x^2 + y_2 ^2 }[/tex]
=> [tex]r_1 = \sqrt{3^2 + 4 ^2 }[/tex]
=> [tex]r_1 = 5 \ m[/tex]
So
[tex]V_a = \frac{9*10^9 * 4*10^{-6} }{5 }[/tex]
[tex]V_a = 7200 \ V[/tex]
Generally the electric potential at A due to the second charge is mathematically represented as
[tex]V_b = \frac{k * q_2 }{r_2 }[/tex]
Here k is the coulombs constant with value [tex]k = 9*10^{9} \ \ kg\cdot m^3\cdot s^{-4} \cdot A^{-2}[/tex]
[tex]r_2[/tex] is the distance between second charge and a which is mathematically represented as
[tex]r_2 = y_2 - y[/tex]
=> [tex]r _2 = 4.0 - (-1.0)[/tex]
=> [tex]r = 5 \ m[/tex]
So
[tex]V_a = \frac{9*10^9 * -2*10^{-6} }{5 }[/tex]
[tex]V_a = -3600 \ V[/tex]
So the net potential difference at point A due to the charges is mathematically represented as
[tex]V_n = V_a + V_b[/tex]
=> [tex]V_n = 7200 - 3600[/tex]
=> [tex]V_n = 3600 V[/tex]
Generally the net potential difference at the origin due to both charges is mathematically represented as
[tex]V_N = V_c + V_d[/tex]
Here
[tex]V_c = \frac{k * q_1 }{x}[/tex]
=> [tex]V_c = \frac{9*10^9 * 4*10^{-6} }{3}[/tex]
=> [tex]V_c = 12000 V[/tex]
and
[tex]V_d= \frac{k * q_2 }{y}[/tex]
=> [tex]V_c = \frac{9*10^9 * -2*10^{-6} }{1}[/tex]
=> [tex]V_c =- 18000 V[/tex]
Generally the net potential difference at the origin is
[tex]V_N = 12000 - 18000[/tex]
=> [tex]V_N = -6000[/tex]
Generally the potential difference at A relative to zero at the origin is mathematically evaluated as
[tex]V_A = V_n - V_N[/tex]
=> [tex]V_A = 3600 - (-6000)[/tex]
=> [tex]V_A = 9600 \ V[/tex]
____________ is an out made when a base runner, forced to run because another teammate must run to the base being occupied, cannot reach the next base safely *
Which evidence did Alfred Wegener’s original theory of continental drift have access to?
Answer:
Evidence for continental drift
Wegener knew that fossil plants and animals such as mesosaurs, a freshwater reptile found only South America and Africa during the Permian period, could be found on many continents. He also matched up rocks on either side of the Atlantic Ocean like puzzle pieces.
Explanation:
HELPP ITS DUE IN 5 MINUTES FREE BODY DIAGRAMS
Answer:
I think it's part c . but sorry if its wrong
Juan makes an adjustment to an electromagnet that causes the electromagnet to lose some of its strength. What did Juan most likely do?
He reduced the number of loops in the wire.
He increased the number of loops in the wire.
He reduced the length of the wire.
He increased the length of the wire.
Answer:
Its A
Explanation:
To reduce the strength of an electromagnet, Juan must reduced the number of loops in the wire.
What is electromagnetic field strength?
The strength of an electromagnetic is the effect or force that an electromagnet exerts in a given field.
The strength of an induced emf in a given magnetic field is given by;
emf = NBA/t
where;
N is number of turns of the magnetB is magnetic field strengthA is area of the coilDecrease in number of turns of the wire, reduces the strength of the magnetic field.
Thus, to reduce the strength of an electromagnet, Juan must reduced the number of loops in the wire.
Learn more about electromagnet here: https://brainly.com/question/12555869
#SPJ2
Numa determinada escala X, arbitrária, um termômetro marca 0°X para o ponto de fusão do gelo e 50°X para o ponto de ebulição da água, ao nível do mar. Que temperatura esse termômetro marcaria se fosse mergulhado em um líquido cuja temperatura é de 50°C?
Answer:
the temperature measured by the thermometer is 25 ° X
Explanation:
The computation of the temperature measured by the thermometer is shown below:
Here is the thermometric scale list
(X - 0) ÷ C - 0 = (50 - 0) ÷ (100 - 0)
X ÷ C = 50 ÷100
X = C ÷ 2
Now if there is 50 degrees celcius
So, the x would be
= 50 ÷ 2
= 25 ° X
Hence, the temperature measured by the thermometer is 25 ° X
The same is to be considere d
4. When energy is transformed from one form to another, what kind of energy is
always part of the transformation ? (and is usually not in a useful form)
Biomechanical Energy
O Heat Energy
Nuclear Energy
Answer:
Energy conversion also termed as the energy transformation, is the process of changing one form of energy into another.
The Law of Energy Conversion.
Scenario Energy conversions involved
In steam engine The heat energy to Mechanical Energy
In Electric heater Electric Energy to Heat
During the transformation of energy from one form to another, the kind of energy that is always part of the transformation is: C. Heat energy.
What is energy?
Energy can be defined as the ability (capacity) to do work. Thus, the standard unit of measurement of energy is Joules (J).
The various kind of energy:
Basically, there are different kind of energy and these include:
Biomechanical energyWave energySound energyNuclear energyHeat energyThe Law of Conservation of Energy:
According to the Law of Conservation of Energy, energy can neither be created nor destroyed but it can only be transformed (converted) from one form to another such as potential energy to kinetic energy.
As a general rule, heat energy is always associated with the transformation of energy from one form to another.
Read more on energy here: https://brainly.com/question/23153766
The chart shows the percentage of different elements in the human body.
Which element is the most prevalent in the human body?
nitrogen
hydrogen
carbon
oxygen
Una larga fanja de pavimento tiene marcas a intervalos de 10m. Los estudiantes usan cronometros para registrar los tiempos en que un automovil pasa por cada marca. Asi han obtenido los datos siguientes: Distancia,m l 0 l 10 l 20 l 30 l 40 l 50 l Tiempo,s l 0 l 2.1 l 4.2 l 6.3 l 8.4 l 10.5 l A) Cual es la rapidez media del vehiculo? B) Al cabo de cuanto tiempo la distancia es igual a 34m? C) Cual es la aceleracion del automovil?
Answer:
men
Explanation:
pls answer quick & an accurate answer will get brainliest
Answer:
3.766 kg or 3.7 kg
Explanation:
F= M*A equation
A cat rolls up a hill. It’s initial Velocity is 10 m/s.n It’s final velocity is 0 m/s. The time was five seconds. Calculate Acceleration
Answer:
[tex]\boxed {\boxed {\sf a= -2 \ m/s^2}}[/tex]
Explanation:
Acceleration can be found by dividing the change in velocity by the time.
[tex]a=\frac{v_f-v_i}{t}[/tex]
The final velocity of the cat was 0 meters per second and the initial velocity was 10 meters per second. The time was 5 seconds.
[tex]v_f=0 \ m/s\\v_i=10 \ m/s\\t= 5 \ s[/tex]
Substitute the values into the formula.
[tex]a=\frac{0 \ m/s-10 \ m/s}{5 \ s}[/tex]
Solve the numerator.
0 m/s-10 m/s= -10 m/s[tex]a=\frac{-10 \ m/s}{5 \ s}[/tex]
Divide.
[tex]a= -2 \ m/s^2[/tex]
The acceleration of the cat was -2 m/s². The negative acceleration indicates slowing down or stopping.
explain what you think is happening in this picture
Answer:
sorry, there is no picture, try re-uploading it with the pic
Explanation:
Answer the following questions
Answer:
9 - 10N to the left
10 - There is no change on the object
Explanation:
Can I have brainliest answer pls?