Explanation:
Mechanical Sound Waves - A sound wave moves through air by displacing air particles in a chain reaction. ... Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.(≚ᄌ≚)ℒℴѵℯ❤
Which type of electromagnetic radiation is responsible for the colors of
objects?
O A. Radio waves
O B. X-rays
O C. Visible light
O D. Ultraviolet radiation
Answer:
C. Visible light
Explanation:
Visible light is responsible for the colors of objects.
Hope it will help :)❤
Kiran runs along a straight road of length 150 m. After
reaching at end of the road he runs back to his initial
position along the same straight path. If he takes a total
time of 1 minute for completing his running, find the
average speed and average velocity of Kiran.
Answer:
Explanation:
Speed and velocity are not the same thing, as I'm sure you have determined while in physics. To find the average speed, we add the total distance run by Kiran and divide that total number of meters by the number of seconds it took to do this (just because I am going to state the speed and velocity in terms of m/s as opposed to m/min). To find the average velocity, we add the displacements together and divide by the total time. First the average speed:
[tex]s=\frac{150+150}{60}=\frac{300}{60}=5\frac{m}{s}[/tex]
Velocity has direction. If Kiran runs to the end of the road (which we will call positive) and then runs back to the start (that direction will be negative), then his displacement fits into the velocity equation as
[tex]v=\frac{150+(-150)}{60}=0[/tex] That means, even though he ran a lot and I'm sure he was very tired, his average velocity for the trip was 0 m/s. When velocity is 0, remember that that means that the total displacement was 0.
What are the si units
Answer:
The uniy which is accepted all over the world is called SI unit.
Explanation:
The system of measurement that is agreed by the international convention if scientists that is held in paris of France to adopt an international unit is called SI unit unit.
What is the magnification when an object is placed at 2f from the pole of the convex mirror?
-2/ 3
-3/2
-1
-1/3
Answer:
Linear magnification = 1/3
Explanation:
Given:
Convex mirror
Object's distance from pole = 2f
Find:
Linear magnification
Computation:
Object distance, u = −2f
So,
1/v + 1/u = 1/f
1/v + 1/(-2f) = 1/f
1/v = 1/f + 1/2f
BY taking LCM
1/v = 3 / 2f
v = 2f / 3
Magnification, M = -v / u
So,
Magnification, M = (2f / 3) / 2f
Magnification, M = 2f / 6f
Magnification, M = 2 / 6
Linear magnification = 1/3
Two arrows are shot vertically upward. The second arrow is shot after the first one, but while the first is still on its way up. the initial speeds are such that both arrows reach their maximum heights at the same instant, although these heights are different. Suppose the that initial speed of the first arrow is 34 m/s and that the second arrow is fired 0.204081632653061 seconds after the first. Determine the initial speed of the second arrow.
Answer:
The initial speed of the second arrow is 33.8 m/s.
Explanation:
initial speed of first arrow, u = 34 m/s
Let the initial height of the second arrow is h.
Let they both reaches at maximum height H.
Let the time taken by the first arrow is t and the second arrow is t - 0.0204
Let the initial speed of the second arrow is u'.
Use first equation of motion for the first arrow.
v = u - gt
0 = u - gt
34 = gt ..... (1)
For the second arrow
v =u' - g (t - 0.0204)
0 = u' - gt + 9.8 x 0.0204
u' = 34 - 0.1999 = 33.8 m/s
A piston is resting halfway into a cylinder containing gas in thermal equilibrium. The layer of molecules next to the closed end of the cylinder is suddenly flash-heated to a very high temperature. Which best describes what happens next
Answer: hello the options related to your question is missing attached below are the missing options
answer : The molecules with the highest temperature will bounce off their neighbors, losing energy to them and so on until the system is at a new equilibrium with the piston moved out ( option B )
Explanation:
What best describes the situation of what will happen next as explained in the question is in Option B
Because molecules with higher temperatures will always posses higher kinetic energy and they will collide more frequently with surrounding molecules passing on their energy in the process until the energy gets to the molecules closest to the piston. The molecules closest to the piston will then hit the piston until a new equilibrium is achieved
Two forces of 8N and 10N CANNOT give a resultant of
a. 1 N
b. 2 N
c. 9 N
d. 18 N
Answer:
Answer is gonna be B. 2N
This is the Answer for your question :3
I hope you are having a great day ❤️❤️❤️❤️
The resultant force is indeed the single force and corresponding tension derived by vector addition when combining any system of torques acting on a solid body.
Its associated torque is generated mostly by the time of filing the compliance.The Pythagorean theorem is being used to determine the resulting force whenever one force acts perpendicularly to another. Calculating the resultant force which not includes force: [tex]\to 10-8= 2\ N[/tex]Therefore, the final answer is "Option b".
Learn more:
brainly.com/question/23869482
Determine the amount of work done by the applied force when a 87 N force is applied to move a 15 kg object a horizontal
distance of 4.5 meters at a constant speed.
Answer:
391.5 J
Explanation:
The amount of work done can be calculated using the formula:
W = F║d where the force is parallel to the displacementLooking at the formula, we can see that the mass of the object does not affect the work done on it.
Substitute the force applied and the displacement of the object into the equation.
W = (87 N)(4.5 m) W = 391.5 JThe amount of work done on the object is 391.5 J in order to move it 4.5 meters with an applied force of 87 Newtons.
Mass doesn't matter on amount of work done .We can calculate amount of work done through Force and Displacement
Force=87NDisplacement=4.5m[tex]\boxed{\sf W=Fd}[/tex]
W denotes to work doneF denotes to forced denotes to displacement[tex]\\ \sf\longmapsto Work\:Done=87(4.5)[/tex]
[tex]\\ \sf\longmapsto Work\:done=391.5J[/tex]
Given the following reactants, what are the most likely products?
A wire has a cross sectional area of 4.00 mm2 and is stretched by 0.100 mm by a certain force. How far will a wire of the same material and length stretch if its cross-sectional area is 8.00 mm2 and the same force is used to stretch it
Answer: [tex]0.05\ mm[/tex]
Explanation:
Given
Cross-sectional area of wire [tex]A_1=4\ mm^2[/tex]
Extension of wire [tex]\delta l=0.1\ mm[/tex]
Extension in a wire is given by
[tex]\Rightarrow \delta l=\dfrac{FL}{AE}[/tex]
where, [tex]E=\text{Youngs modulus}[/tex]
[tex]\Rightarrow \delta_1=\dfrac{FL}{A_1E}\quad \ldots(i)[/tex]
for same force, length and material
[tex]\Rightarrow \delta_2=\dfrac{FL}{A_2E}\quad \ldots(ii)[/tex]
Divide (i) and (ii)
[tex]\Rightarrow \dfrac{0.1}{\delta_2}=\dfrac{A_2}{A_1}\\\\\Rightarrow \delta_2=0.1\times \dfrac{4}{8}\\\\\Rightarrow \delta_2=0.05\ mm[/tex]
the volume and the mass of substance are 15cm3 and 27 gm respectively find its density
Answer:
[tex]d=1.8\ g/cm^3[/tex]
Explanation:
Given that,
Mass, m = 27 grams
Volume of the substance, V = 15 cm³
We need to find the density of the substance. We know that, the density of an object is given by mass per unit volume. So,
[tex]d=\dfrac{m}{V}\\\\d=\dfrac{27}{15}\\\\d=1.8\ g/cm^3[/tex]
So, the density of the substance is equal to [tex]1.8\ g/cm^3[/tex].
Which of the following changes occurs during nuclear fission?
A. Energy is absorbed from the surroundings.
B. Atomic nuclei combine to form a larger nucleus.
C. Energy is converted into mass.
D.
The parent nucleus splits into lighter daughter elements.
Reset
Answer:
The parent nucleus splits into lighter daughter elements
Explanation:
Nuclear fission involves the splitting of nucleus of a lighter element with smaller particles
(give the answer or I'll report) please solve it with the steps
Answer:
The required elastic potential energy is 0.068J
Explanation:
Given,
Spring force constant, k= 3.4 N/M
Spring stretch length/ Displacement, x= 0.2m
We know,
Elastic potential energy, V= [tex]\frac{1}{2} kx^{2}[/tex]
=[tex]\frac{1}{2}*3.4*(0.2)^{2}[/tex]
=[tex]\frac{0.136}{2}[/tex]
=0.068
∴The required elastic potential energy is 0.068J
which way would 2 negatively charged balloons naturally move? what would that do to the amount of potential energy stored in the field?
Answer:
gsg
Explanation:
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
What is force of repulsion?The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.
In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
Find more on electrostatic repulsion:
https://brainly.com/question/24013868
#SPJ2
8× +5+9×+3 how can I solve this
Answer:
collect like terms then add=>8x+9x+5+3
=>8x+9x+5+3=>17x+8
A children's roller coaster is released from the top of a track. If its maximum speed at ground level is 3 m/s, find the height it was released from.
Answer:
h = 0.46 m
Explanation:
According to the law of conservation of energy:
Potential Energy Lost by Roller Coaster = Kinetic Energy Gained by Roller Coaster
[tex]mgh = \frac{1}{2}mv^2\\\\2gh = v^2\\\\h = \frac{v^2}{2g}[/tex]
where,
h = height = ?
v = speed at bottom = 3 m/s
g = acceleration due to gravity = 9.81 m/s²
Therefore,
[tex]h = \frac{(3\ m/s)^2}{(2)(9.81\ m/s^2)}[/tex]
h = 0.46 m
77. The first law of motion applies to
a. Only objects that are moving
b. Only objects that are not moving
C. All objects whether moving or not
No obiect, whether moving or not
Which of the following best describes the formation of surf? Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break. As waves enter shallow water, the distance between wave crests (wave length) shortens, increasing the tendency to break.
Answer:
The question above would be written again but this time with options attached to it for comprehension sake:
Which of the following best describes the formation of surf?
A. Waves energy, rebounding from its impact with shore, crashes into oncoming waves, causing them to break.
B. Entering shallow water forces wave energy upward, making the wave crest unstable and causing it to break.
C. A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break.
D. As waves enter shallow water, the distance between wave crests (wavelength) shortens, increasing the tendency to break.
The correct answer is option C (A wave encountering shallow water begins to slow at its bottom, while the top of the wave continues at its previous speed. This causes the wave to break).
Explanation:
Surf could mean crashing waves or breaking waves. Generally, the wave speed is constant in the same medium, however, the wave speed decreases as it enters shallow water which is largely due to the water depth which is relatively small, especially when it encounters the bottom of the shallow water. While the top of the wave overtakes the bottom of the wave, making sure the top of the wave continues at its previous speed.
Iron meteorites are interpreted as deriving from the cooled metallic core of a largeish asteroid. This is based upon:
Answer:
This is based upon the fact that meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids
Explanation:
Iron meteorites are interpreted as deriving from the cooled metallic core of a larger asteroid , because meteorites are generally believed to have originated as solid debris from Larger bodies like meteoroid or asteroids that are located outside the planet but found their way into our planet .
I will mark you as brainliest
pls ans
a) Name the graph?
b) In first 2 s the object is said to be in ______________ motion.
(uniform motion / uniform acceleration)
c) The portion BC of the graph represents which type of motion?
d) Find out acceleration in first 2 s?
I don't know♀ what is your favorite song
pls answer my quetion i will give brainlist answer
Answer:
here's an explanation but not the answer
please kindly send No or Yes understand.
Explanation:
A 10-N force is applied to push a block across a friction free surface for a displacement of 5.0 m to the right.
See Answer
See Answer
A 10-N frictional force slows a moving block to a stop after a displacement of 5.0 m to the right.
what is the size of the electron charge?
Answer:
It’s like medium uk
Explanation:
The size of electron charge is estimated to be 1.6 × 10-¹⁹
Between which two points did they travel fastest?
How can you tell this from the graph that they travelled fastest during that section?
plzzz helppp mee
Answer:
During the section CD , the speed is fastest.
Explanation:
The rate of change of distance is called speed.
Speed = distance / time
Its SI unit ism/s. It is a scalar quantity.
The slope of the distance time graph is given by the speed of the object.
Here, the speed of AB is 30/3= 10 m/s .
The speed of BC is = 0 m/s
The speed of CD is (50 - 30)/(6 - 5) = 20 m/s
So, the speed is maximum during the section CD.
f the voltage in a circuit is 80 volts and the resistance is 20 ohms, what is the current?
I = 4 A
Explanation:
From Ohm's law, the voltage is given by
V = IR
or
I = V/R = (80 V)/(20 ohms)
= 4 A
If you were capable of converting mass to energy with 100%, efficiency, how much mass would you need to produce 3.5x10^12 Joules of energy?
Answer:
a) 3.9 x 10⁻⁵ kg
Explanation:
The amount of mass required to produce the energy can be given by Einstein's formula:
[tex]E = mc^2\\\\m = \frac{E}{c^2}[/tex]
where,
m = mass required = ?
E = Energy produced = 3.5 x 10¹² J
c = speed of light = 3 x 10⁸ m/s
Therefore,
[tex]m = \frac{3.5\ x\ 10^{12}\ J}{(3\ x\ 10^8\ m/s)^2} \\\\m = 3.9\ x\ 10^{-5}\ kg[/tex]
Hence, the correct option is:
a) 3.9 x 10⁻⁵ kg
(only answer if you know the answer or I'll report) Solve it w the steps tysm
Answer:
v_f = 20 m / s
Explanation:
For this exercise let's use the relationship between momentum and moment
I = Δp
F t = m v_f - m v₀
as the body starts from rest v₀ = 0
F t = m v_f
v_f = [tex]\frac{F t}{m}[/tex]
let's calculate
v_f = 4 2 / 0.4
v_f = 20 m / s
Charges of +3 µC and –5 µC are 2 mm from each other. The –5 µC charge is replaced with a +5 µC charge.
How will the electrical force between the charges compare with the original force?
same force, but in the opposite direction
same force, but in the same direction
greater force, but in the opposite direction
greater force, but in the same direction
Answer: same force in opposite direction.
Explanation: Charges of opposite sign attracts each other and charges with same sign repel each other. Because only sign of negative charge changes, and absolute value of charge remains same, value of force is same but is in opposite direction.
Answer:
A) same force, but in the opposite direction
Explanation:
he's right
In which stage of a star's life cycle, does gravity and fusion become balanced, and an adult star forms?
A. Main-sequence
B. Red supergiant
C. Protostar
D. White dwarf
Answer:
im guessing red giant-
La resistividad de cierto alambre es 1.72x10 -8 Ωm a 20 oC .Una batería de 6v se conecta a una bobina de 20 m de este alambre, con un diámetro de 0.8 mm. ¿Cuál es la corriente en el alambre?
Answer:
i = 1.09 10⁴ A
Explanation:
For this exercise we will look for the resistance of the wire
R = ρ L / a
the area of the wire is
a =ππ r² = π πd² / 4
we substitute
R = ρ L 4 / π d²
R = 1.72 10⁻⁸ 20 4/π 8 10⁻⁴
R = 5.47 10⁻⁴ Ω
to calculate the current we use ohm's law
V = R i
i = V / R
i = 6 / 5.47 10⁻⁴
i = 1.09 10⁴ A
Una lámpara requiere 5 A y presenta una resistencia de 20 Ω, cuando está
encendida.
a. ¿Cuál es la tensión?
b. ¿Qué resistencia adicional requiere si se desea operar a 120 V?
c. ¿Y 110 V?
Answer:
a. V = 100 voltios
b. Para 120 V → [tex]R_{2} = 4 \Omega[/tex]
c. Para 110 V → [tex]R_{2} = 2 \Omega[/tex]
Explanation:
a. La tensión se puede calcular mediante la ley de Ohm:
[tex] V = IR [/tex]
V: es el voltaje o tensión =?
I: es la corriente = 5 A
R: es la resistencia = 20 Ω
Entonces, la tensión es:
[tex]V = IR = 5 A*20 \Omega = 100 V[/tex]
b. La resistencia adicional es la siguiente:
[tex] R_{2} + R_{1} = \frac{V}{I} [/tex]
[tex]R_{2} = \frac{V}{I} - R_{1} = \frac{120 V}{5 A} - 20 \Omega = 4 \Omega[/tex]
c. La resistencia adicional para operar a 110 voltios es:
[tex]R_{2} = \frac{V}{I} - R_{1} = \frac{110 V}{5 A} - 20 \Omega = 2 \Omega[/tex]
Espero que te sea de utilidad!