Answer: The list of elements from highest to lowest Ionization Energy is Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth.
Explanation:
The amount of energy required to remove the most loosely bound electron from an isolated gaseous atom or ion is called ionization energy.
Element with a half-filled orbital requires much more energy to remove an electron. This is because element with a half-filled electronic configuration is the most stable in nature.
More stable or tightly electrons are bound to the nucleus of an atom more will be its ionization energy. This also means that smaller is the atom higher will be its ionization energy.
When we move from top to bottom in a group the size of atom increases and the attraction between nucleus of atom and its valence electrons decreases. Hence, less will be the ionization energy.
Therefore, ionization energy decreases on moving down a group.
So, the given elements Phosphorus, Bismuth, Arsenic, Antimony, Nitrogen are all group 15 elements. Hence, decreasing order of their ionization energy is as follows.
Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth
Thus, we can conclude that the list of elements from highest to lowest Ionization Energy is Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth.
Balance this chemical equation
Ca(OH)2 + HCl ---> CaCl2 + H2O
Answer:
The balance equation of Ca(OH)2 + HCl ---> CaCl2 + H2O
is
Ca(OH)2(s) + 2HCl(aq) ---> CaCl2(aq) +2H2O (l) (balanced equation)
How GM food are produced?
What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.
Answer:
GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.
What is the correct name for the chemical formula N408?
Answer:
molar mass (molar weight)
Explanation:
based on the graph below, which statement
Answer:
4. Atmospheric pressure decreases as altitude increases.
Explanation:
hope this helps and is right. p.s i really need brainliest :)
What is the pOH of a solution of pH 3 acid? (Kw= 1.0 x 10-14)
Answer:
pOH = 11
Explanation:
The pH is an unit of concentration widely used in chemistry to find the quality of a solution.
To solve this question we must, as first, find the [H+] using the pH:
[H+] = 10^-pH
[H+] = 10^-3
Now, using kw:
kw = 1.0x10-14 = [H+] [OH-]
1.0x10-14 = [10^-3] [OH-]
[OH-] = 1.0x10-11
pOH = -log [OH-]
pOH = 11The movement of water from an area of high concentration to one of low concentration through a semipermeable membrane is called ?
90 grams of NaNO3 were added to solution at 10 degrees Celsius. What type of solution was formed?
Answer:
friend me on here and imma send you the link Explanation:
The reaction of an acid and a base will always produce what kind of salt?
A.
a combination of the cation from the acid and the anion from the base
B.
a combination of the cation from a strong base and the anion from a weak acid
C.
neutral salts from the cation of a strong base and the anion from a weak acid
D.
basic salts from the cation of a strong base and a strong acid
E.
depends on the strength of the acid and the base
Explanation:
E maybe i am not sure or C
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)
you can test carbon dioxide gas with
Answer:
you can test carbon dioxide gas with calcium hydroxide
hope this is what you're looking for
stay safe and have a nice day
✌◕ ◡ ◕✌
Which process is represented by the label a?
Answer:
Sediment to sedimentary rock (and vice versa) is Compactation and Cementation.
Explanation:
This happens via Lithification, which is the compacting of sediments under pressure.
29.) What charge would you expect from a Group 1 atom when it becomes an ion?
a.) 2-
b.) 2+
c.) 1-
d.) 1+
Answer:
d
Explanation:
It is 1+ because when the periodic table is drawn well into there groups become cations
Which of the following processes
release energy?
A. Water evaporating
B. Ice melting
C. steam condensing
D. wax melting
21.) This substance consists of two or more nonmetal elements in a fixed ratio.
a.) element
b.) mixture
c.) molecule
d.) compound
Answer:
Molecule
Explanation:
when two or more than two non-metal elements are combined then it form Molecule.
please mark all that apply!
Answer:
F G there you go the guy on top is right
Explanation:
F G
Phenolphthalein meaning
Answer:
Phenolphthalein is a chemical compound with the formula C20H14O4 and is often written as "HIn" or "phph" in shorthand notation. Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions.
Answer:
Phenolphthalein is a chemical compound, a colorless crystalline solid, though pink in a alkaline solution, and is also used as an acid-base indicator.
Explanation:
How many moles of Chromium(III) nitrate (Cr(NO3)3) are produced when Chromium reacts with 0.85 moles of Lead(IV) nitrate (Pb(NO3)4) to produce chromium(III) nitrate (Cr(NO3)3) and lead? 4 Cr + 3 Pb(NO3)4 → 4 Cr(NO3)3 + 3 Pb
Answer:
[tex]0.64molCr(NO_3)_3[/tex]
Explanation:
Hello there!
In this case, according to the given chemical equation, it turns out possible for us to realize there is a 4:3 mole ratio of chromium(III) nitrate to lead(IV) nitrate, and therefore, we can calculate the moles of the former by applying the shown below stoichiometry setup:
[tex]0.85molPb(NO_3)_4*\frac{3molCr(NO_3)_3}{4molPb(NO_3)_4} \\\\0.64molCr(NO_3)_3[/tex]
Regards!
Study the particle below carefully and answer
the questions that followed.
a)ldentify the particle.
b)Write the electronic configuration of the
particle.
c)State
i.Atomic number
ii.Mass number
iii.Proton number
iv.Electron number
d) Calculate the neutron number
e) State the valency
f)What is the valence electrons?
Answer:
b is the answer hope that helps
6 a 100 sample of Au - 198 Au 198 be? Decays to 3.125 g in 13.5 days, what would the half-life of au198 be?
Answer:
Half-life = 2.7 days
Explanation:
The radioactive decay of an isotope follows the equation:
Ln[A] = -kt + ln[A]₀
Where [A] could be taken as the amount of A after t time, k is decay constant, [A]₀ initial amount of A.
Replacing to solve k:
Ln[3.125g] = -k*13.5days + ln[100g]
-3.465736 = -k*13.5days
k = 0.2567days⁻¹
Half-life is:
half-life = ln2 / k
Half-life = 2.7 days
HELP PLEASE
1. Locations where volcanoes form far from plate boundaries are called
A. islands
B. hot spots
C. divergent zones
4. There are 1.9 moles of Oxygen gas at a pressure of 3.50 atm, and the temperature is 65°C. What is the
volume of the gas? Remember that R = 0.0821 L x atm/Kx mol AND that you must convert °C to K.
Fill in the variables chart:
Answer:
15.06 L
Explanation:
Using the ideal gas law equation:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
According to the information provided in this question,
P = 3.50 atm
n = 1.9 moles
V = ?
T = 65°C = 65 + 273 = 338K
Using PV = nRT
V = nRT/P
V = (1.9 × 0.0821 × 338) ÷ (3.5)
V = 52.725 ÷ 3.5
V = 15.06 L
Polar bears are adapted to stay warm by growing thick fur. These organisms most likely live in a what
Answer:
They live in the open snow
Explanation:
One of your classmates asks you why an ice cube melts in water. Which of the following
would be your best explanation?
a.) The ice cube transfers energy to the air.
b.) The ice cube transfers energy to the water.
c.) Energy is transferred from the ice to the water and from the water to the ice.
d.) The water transfers energy to the ice cube.
Answer:
the answer is B
Explanation:
the ice puts 8ts cold into the water taking it away from the ice
3. Which model has properties most similar to chlorine?
Model A
Model B
Model C
Model D
Answer:
bnsjsbbakakaisbsbwnsjznss
Explanation:
cnsjzjsnsnsjs ssnsnsnzksmnznnzna
what is acid? Explain it
Answer:
An acid is a chemical that is posining or sometimes not
Explanation:
This is the best I could explain brainliest
The total mass of reactants and products is _______ during a chemical reaction
Answer: The total mass of reactants and products is the same during a chemical reaction.
Explanation:
the total mass of reactants is equal to the total mass of products.
Is all the biomass consumed by a primary consumer, such as a brine shrimp, transferred to the secondary consumer, such as a gull, when the brine shrimp is eaten? For instance, if a brine shrimp eats 10 g of algae in its life before the gull eats it, does the gull get 10 g of biomass when it eats the brine shrimp? Why or why not?
cultura de Australia ?
La cultura de Australia es una cultura occidental derivada principalmente de Gran Bretaña, pero también influenciada por la geografía única del continente australiano, la diversa aportación de aborígenes, isleños del Estrecho de Torres y otros pueblos de Oceanía. ... Los australianos son generalmente relajados, abiertos y directos.
To determine the molar mass of an element, one must know the element's
a. number of isotopes.
b average atomic mass
c avogradro constant
d atomic number
Answer:
d
Explanation:
from you know the atomic number it should be easy to find
To determine the molar mass of an element, one must know the element's atomic number. Therefore, option D is correct.
What is the atomic number ?An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.
Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.
The atomic mass of any element on the periodic table can be used to calculate its molar mass.
Thus, option D is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ6
Which of the following phase changes describes what is
happening in the following endothermic process?
H20 (1) + heat --> H2O (g)
O melting
o freezing
o boiling
O condensing
Answer:
I think the answer is boiling