Answer:
naturalistic
Explanation:
A 25.00 mL sample of the ammonia solution
was accurately diluted to 250.0 mL. A 25.00mL
aliquot of the diluted ammonia solution was
placed in a conical flask. Indicator was then added
and the solution was titrated with 0.208 molL-1
hydrochloric acid. The indicator changed colour
permanently when 19.64 mL of the acid had been
added. Calculate the concentration of ammonia in
the original solution.
Answer:
1.634 molL-1
Explanation:
The mol ration between NH3 and HCl is 1 : 1
Using Ca Va / Cb Vb = Na / Nb where a = acid and b = base
Na = 1
Nb = 1
Ca = 0.208 molL-1
Cb = ?
Va = 19.64 mL
Vb = 25.00mL
Solving for Cb
Cb = Ca Va / Vb
Cb = 0.208 * 19.64 / 25.0
Cb = 0.1634 molL-1 (Concentration of diluted ammonia solution)
Using the dilution equation;
C1V1 = C2V2
Initial Concentration, C1 = ?
Initial Volume, V1 = 25.00 mL
Final Volume, V2 = 250 mL
Final Concentration, C2 = 0.1634 molL-1
Solving for C1;
C1 = C2 * V2 / V1
C1 = 0.1634 * 250 / 25.00
C1 = 1.634 molL-1
At which type of tectonic plate boundary is a volcano least likely to occur?
Answer: the answer is a
Explanation:
I took the test and got it wrong because someone said the answer was divergent boundary and it’s wrong. I hate them I hate them I hate them. I hate it I hate school
Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
What is meant by Transform boundary?A transform fault or transform boundary, sometimes called a strike-slip boundary, is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
To learn more about Transform boundary refer:https://brainly.com/question/18190655
#SPJ2
o
Plants rely heavily on _______
in the nitrogen cycle to incorporate nitrogen into organic come pounds
1 oxygen
2 viruses
3 bacteria
4 fungi
Answer:
3. Bacteria
Explanation:
If you don't trust me, search it up!
What is the volume of an object that has a mass of 5.80 g and a density of 6.35 g/mL?
Answer:
1.09 mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
We can rearrange the equation to solve for volume, using algebra.
v = d/m
Therefore v = 6.35/5.80 = 1.09 mL
Which is the correct complete ionic equation for the reaction of
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)?
a) H+(aq) + CI-(aq) + Zn(s) →
H2(g) + Zn2+(aq) + Cl-(aq)
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
c) H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
d) 2H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
Answer:
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
Explanation:
The equation is given as;
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)
In writing an ionic equation, only the aqueous compounds dissociates into ions. This means HCl and ZnCl2 would dissociate to form ions.
This is given as;
2H+ + 2Cl- + Zn(s) --> H2(g) + Zn2+ + 2Cl-
The correct option is;
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
how far is pluto from jupiter
Which of these is a behavioral adaptation?
An anteater has a very long tongue to help it eat catch and eat ants.
An artic fox has white fur which helps it blend into the snow.
A mouse has 3–14 offspring at a time to increase the number that survive.
A brown bear hibernates and becomes inactive during winter.
Answer: Your answer would be D
Explanation: Sorry if i get it wrong ! (but good luck and make sure to rate)
Answer:
D
Explanation:
because when it is winter
a bear hibernates in a cave
and eats lots of food so it
dosent starve after sleeping
for such a while.
Hope this helps
plz mark brainliest
if you would be so kind!
bye!
If you're wearing a yellow shirt in magenta light, what colour does the shirt look like now?
Molar Mass:
Find the molar masses of the following compounds. Also report the number of atoms in the compound:
1) NaBr
2) PbSO4
3) Ca(OH)2
4) Na3PO4
5) (NH4)2CO3
6) C6H12O6
7) Fe3(PO4)2
8) (NH4)2S
9) Zn(C2H3O2)2
10) AgF
Answer:
Atomic models are important because, they help us visualize the interior of atoms and molecules, and thereby predicting properties of matter.
Explanation:
We study the various atomic models in our course of study because, it is important for us to know, how did people come to the present concept of an atom. How did physics evolve from classical to quantum physics.
All these are important for us to know and thus, knowledge about various atomic models, their discoveries and drawbacks and finally improvements based on scientific evidence present at that time is important for us to understand the underlying theory very well.
Explanation:
A DAY IN THE LIFE OF METIS JOURNAL. I WROTE IT HOPE U LIKE IT XD
We, who live in the west, were Nomadic. So we always moved from place to place to hunt buffalo and other fur-bearing animals. And now again we have to shift everything we collected , like, all the essential needs we collected. It’s really hard to shift stuff, But when you move to a new place you get to see new beautiful places. They are just so satisfying to see! It’s like all my work(like the shifting work) is paid off. I love it! We always meet the Hudson’s bay company employees, and give them furs which we took from the bissons and other furry animals we hunted. And in exchange they give us their (Hudson’s Bay company) goods. Which is good! Because then we or I won't be able to enjoy that delicious pemmican!
The one reason that makes me proud of my parents is that because of them I am like a translator for both sides in the fur trade! Anyways coming back to the present. As I said before, we were moving today to another place, But on the way some people along with my father will ride the famous York boats carrying supplies to fur posts. I begged my father to take me with him! And as usual he gave me some silly reason for me to stay. And now since I don’t have anything to do I will-..Nevermind, My mom’s calling me. Okay after helping my mom keep the fur posts into the York boats me , my mom, and the others are just relaxing and enjoying nature just to take a break. Since, I am so obsessed with my Journal notebook today I’m just going to sit here and right what comes to my mind. I’m not like the others who always seem to be talking with someone. I like my own space!
I kind of miss my dad already, but he and his fellow members need to travel the waterways from the red river further west and north to hudson bay. These red river carts also travel the trek back and forth over land to St. Paul, Minnesota and to posts in saskatchewan. Speaking about the red river, the only large settlement in the region is the red colony. About 12000 people lived in this colony around Fort Garry. Some were the original Selkirk settlers or their descendents. They had come from Scotland with lord Selkirk when he established the colony in 1811. Many of these original settlers were poor farmers who had been displaced from their lands in scotland. They had endured many hardships in the early years of settlement, including foods, hunger, and sickness. I love studying about other colonies, cultures , history etc.
Write the name of flame used In charcoal cavity test.why?
Answer:
the reducing flame also called the carburizing flame.
Explanation:
because it gets the oxides of the unknown salts
For the balanced equation shown below, how many moles of N2 reacted, if 155 moles of NH3 are produced?
3H2 + N2 => 2NH3
Answer: 1 mole nitrogen produces 2 moles ammonia
How many moles you need for 155 mol ammonia?
155/2 moles
Explanation:
A forecaster studying the climate of an area would find which of the following most helpful?
A. average yearly precipitation
B. today's barometric pressure
C. temperature changes in one month
D. how often natural disasters occur
A forecaster studying the climate of an area would find average yearly precipitation most helpful.
What is forecaster studying of climate?Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.
Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.
Hence, option (A) is correct.
To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372
Which of the following pairs of elements will combine to produce a covalent bond?
1-Hydrogen and chlorine
2-Magnesium and oxygen
3-Lithium and bromine
Answer:
Hydrogen and Chlorine
ie HCL
The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.
In Chemistry, the three (3) main types of chemical bonds include:
Ionic bonds: Lithium and bromineHydrogen bonds: Hydrogen and oxygen.Covalent bonds: Hydrogen and chlorine.A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.
For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.
The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).
In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.
Read more: https://brainly.com/question/24212500
How many molecules are found in 3.4 moles of carbon dioxide?
Please help me asap! :0
Thank you!
Answer:
One mole of anything has 6.023 x 10^23 molecules.
That would mean 3.4moles of CO2 have 6.023x 10^23 times 3.0.
So that would be2.04782×10^24 molecules in 3.0 moles of C02.
Mole measure the number of elementary entities of a given substance that are present in a given sample. 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of molecules of carbon dioxide = number of moles of carbon dioxide ×6.022×10²³ molecules
Number of moles of carbon dioxide=3.4moles
Substituting the values in the above equation we get
number of molecules of carbon dioxide =3.4moles×6.022×10²³ molecules
number of molecules of carbon dioxide =2.047×10²⁴
Therefore, 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Did anyone do this worksheet (science)
when a rotting log was turned over, pill bugs, termites , ants , fungi , and earthworms were living there. the termites represent ____ in its
a. an environment
b. a population
c. a niche
d. an abiotic factor
What is the molarity of a solution when 2.75 g of NaCl is dissolved in 1100 mL of solution?
0.043 M
0.25 M
0.43 M
4.27 M
Answer:
Explanation:
0.25 M
The molarity of a solution will be 4.27M .
What is molarity?Molarity (M), often known as molar concentration, is the concentration of a solution expressed in moles of solute per liter of solution.
What is solution?Solution can be considered as a mixture of more than one component. It may be homogeneous solution as well as heterogeneous solution.
Gram to mole conversion:
[tex]=\;2.75\;g.\;\frac{1\;mol}{58.44g} \\=\;0.0470 \;mol[/tex]
Molarity of the solution can be calculated by using the following formula:
It is calculated that, moles of solute = 0.0470 mol, volume of the solution = 1100 mL.
Now, put the value of given data in molarity formula:
[tex]Molarity=\frac{Moles\;of\;the\;solute}{Volume \;of\; the\; solution} \\=\frac{0.0470\;mol}{1100 \;mL} \\=\;4.27\;mol/mL\\=\;4.27\; M[/tex]
Therefore, the molarity of a solution will be 4.27M.
To know more about molarity and solution click here.
https://brainly.com/question/2817451.
#SPJ2
Using the rules of electron configurations is this a valid orbital diagram?
Revise this statement to make it true:
Running water makes rock edges very sharp and pointy.
NEED HELP NOW PLEASE!! WHOEVER ANSWERS FIRST GETS BRAINIEST!!! No links or I’m reporting your answer.
Answer:
Running water makes rock edges very dull because of erosion.
Explanation:
hope this helps ^_^
how many moles is 130g of cocl2
Answer:
1.3142 mol CoCl2
Explanation:
Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2
Co = 28.0101 g Co per mole
Cl = 35.453 * g Cl per mole
28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole
Now, we divide:
130/98.9161 = 1.3142 mol CoCl2
There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.
According to this question, there are 130g of CoCl2.
molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol
moles = 130g ÷ 99g/mol
moles = 1.31 moles
Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).
Learn more about number of moles at: https://brainly.com/question/14919968
Which type of solute would have the greatest impact on a colligative property?
A. C6H12O6
B. NaCl
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А
base-pair substitutions and point mutations
B
silent mutations and nonfunctioning proteins
С
missense mutations and nonsense mutations
D
base-pair insertions and deletions
Answer:
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А base-pair substitutions and point mutationsB silent mutations and nonfunctioning proteins
С missense mutations and nonsense mutations
D base-pair insertions and deletions
Among the given disorders, missense mutations and nonsense mutations which mostly influences the shift in entire nucleotide.
What is mutation?A nucleotide is made of ribose sugar, phosphate groups and base pairs. Each base have a complementary base to which it pairs. If any disorder occurs in the base pairing or coding in nucleotide it is called the mutation.
A missense mutation is a sort of point mutation or single base mutation that alters the DNA by replacing one nucleotide of the codon with another nucleotide, thus changing the amino acid that is coded for in the protein.
A nonfunctional protein may emerge from the substitution of an amino acid, or the protein may not be impacted at all. Whether the mutational alterations are "conservative" or "nonconservative" will determine the functionality of the resulting protein.
It's interesting to note that the mutation is known as a nonsense mutation when the alteration in the codons nucleotide causes the development of the stop codon. The nonsense mutation causes the premature end of protein synthesis as a result of the creation of the stop codon.
To find more on mutations, refer here:
https://brainly.com/question/13923224
#SPJ2
Use a scientific calculator to calculate [H+] for the following pH values:
7 (a neutral solution)
5.6 (unpolluted rainwater)
3.7 (first acid rain sample in North America)
How many times higher is the concentration of H+ in the Hubbard Brook sample than in unpolluted rainwater?
Answer:
pH = 7 ⇒ [H⁺] = 1.0x10⁻⁷ M
pH = 5.6 ⇒ [H⁺] = 2.5x10⁻⁶ M
pH = 3.7 ⇒ [H⁺] = 2.0x10⁻⁴ M
H⁺ concentration in the Hubbard Brook sample is 80 times higher than in unpolluted rainwater.
Explanation:
To answer this problem we need to keep in mind the definition of pH:
pH = -log[H⁺]Meaning that after isolating [H⁺] we're left with:
[H⁺] = [tex]10^{-pH}[/tex]Now we proceed to calculate [H⁺] for the given pHs:
pH = 7 ⇒ [H⁺] = [tex]10^{-7}[/tex] = 1.0x10⁻⁷ MpH = 5.6 ⇒ [H⁺] = [tex]10^{-5.6}[/tex] = 2.5x10⁻⁶ MpH = 3.7 ⇒ [H⁺] = [tex]10^{-3.7}[/tex] = 2.0x10⁻⁴ MFinally we calculate how many times higher is [H⁺] when pH = 3.7 than when pH = 5.6.
2.0x10⁻⁴ / 2.5x10⁻⁶ = 80Answer:
1. 7 (a neutral solution)
Answer: 10-7= 0.0000001 moles per liter
2. 5.6 (unpolluted rainwater)
Answer: 10-5.6 = 0.0000025 moles per liter
3. 3.7 (first acid rain sample in North America)
Answer: 10-3.7 = 0.00020 moles per liter
The concentration of H+ in the Hubbard Brook sample is 0.00020/0.0000025, which is 80 times higher than the H+ concentration in unpolluted rainwater.
Explanation: -
What is metal ? Where does it coke from ?
Answer:
Most pure metals, like aluminium, silver and copper, come from the Earth's crust. They are found in ores – solid materials called minerals, usually occurring in rock, from which the pure metal has to be extracted. The properties of pure metals can be improved by mixing them with other metals to make alloys.a metal is an element that readily forms positive ions (cations) and has metallic bonds
coke is a strong stimulant made from coca leaves
potassium hydroxide , sodium chloride, sodium hydroxide ,calcium chloride , sodium bicarbonate write molecular formula
✧ [tex] \underline{ \underline{ \large{ \tt{A \: N \:S \: W \: E \: R}}}} : [/tex]
[tex] \underline{ \underline{ \large{ \text{Molecular \: Formulaes}}}} : [/tex]
⇾ [tex] \large{ \text{Potassium \: Hydroxide : K \: OH}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Chloride : NaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Hydroxide : NaOH}}[/tex]
⇾ [tex] \large{ \text{Calcium \: Chloride : CaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Bicarbonate} : \tt{Na ( HCO)_{ 3} }}[/tex]
---------------------------------------------------------
☥ [tex] \underline{ \underline{ \large{ \tt{ \: E \: X\: P \: L\: A\: N \: A \: T \: I \: O \: N}}} }: [/tex]
[tex] \underline{ \underline{ \text{Writing \: a \: molecular \: formula}}} : [/tex]
To write a molecular formula , the following steps are usually adopted only when we know the symbol and valencies of elements and radicals present in a molecule.
Step 1 : First , the name of the compound is written.
Step 2 : The symbols of basic and acidic radicals are written side by side.
Step 3 : The valency of each radical is written at the right upper corner of the symbol. The valency of one radical is transferred to another radical and it is written on the right hand side at the bottom corner. If necessary , L.C.M of the valencies us taken to get a simple whole number.
Step 4 : If a compound radical takes part in the molecular formula , the radical is enclosed in brackets and the valency number is written on the right side of the bracket at the bottom of the formula.
For instance :
[tex] \text{Calcium \: \: \: \: \: \: Sulphate}[/tex] [ compound ]
1. [tex] \sf{Ca \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: SO_{4} }[/tex] [ Symbol of basic and acidic radicals ]
2.We know : Valencies of calcium and sulphate are 2 and 2 respectively
3. [tex] \sf{Ca_{2} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: (SO_{4} )_{2} }[/tex] [ Valencies are exchanged and compound radical is enclosed in bracket ]
4.[tex] \sf{CaSO_{4}}[/tex] [ L.C.M is taken to get molecular formula of calcium sulphate ]
Hope I helped ! ♡
Have a wonderful day / night ! ツ
☄ Let me know if you have any questions regarding my answer !
☥ [tex] \underline{ \underline{ \mathfrak{Carry \: On \: Learning}}}[/tex] !! ✎
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
What kind of data does doppler radar provide?
Answer:
the one above is not right
Explanation:
A student draws the model shown below. Which of these best compares the conditions at Location X and Location Y?
Answer:
Explanation:
You have to use formula b to your answer
Suppose Rutherford's lab was 10 meters (m) long and the speed of an alpha particle is 3.0x10^8 meters per second (m/s). How much time would he plan on the alpha particles taking to move from the alpha particle source to the gold foil target? Write it in a mathematical equation
Answer:
t = d/v , 33.3 ns
Explanation:
Since distance, d = vt where v = speed and t = time taken to cover the distance.
Since the distance, d covered by the alpha particle is the length of Rutherford's lab which is 10 m long and the speed of the alpha particle is v = 3 × 10⁸ m/s, the time, t it takes the alpha particle to move from the alpha particle source to the gold foil target is thus
t = d/v
= 10 m/3 × 10⁸ m/s
= 10/3 × 10⁻⁸ s
= 3.33 × 10⁻⁸ s
= 33.3 × 10⁻⁹ s
= 33.3 ns
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
When dissolved in water all acids will???
Answer:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-). If a solution has a high concentration of H+ ions, then it is acidic.
Explanation:
So b