Answer:
Calor absorbido, Q = 52325 Joules
Explanation:
Dados los siguientes datos;
Masa = 250g to kg = 250/1000 = 0.25kg
Temperatura inicial, T1 = 10°C to Kelvin = 273 + 10 = 283K
Temperatura final, T2 = 60°C to Kelvin = 273 + 60 = 333K
Capacidad calorífica específica = 4186 j/kg.K.
Para encontrar la cantidad de calor necesaria;
La capacidad calorífica viene dada por la fórmula;
[tex] Q = mct [/tex]
Dónde;
Q representa la capacidad calorífica o la cantidad de calor.
m representa la masa de un objeto.
c representa la capacidad calorífica específica del agua.
dt representa el cambio de temperatura.
dt = T2 - T1
dt = 333 - 283
dt = 50 K
Sustituyendo en la fórmula, tenemos;
[tex] Q = 0.25*4186*50[/tex]
[tex] Q = 52325 [/tex]
Calor absorbido, Q = 52325 Joules
A new piece of exercise equipment has been added to your gym, and you try it out. To use this machine, you lie horizontal on a mat with your feet against a platform perpendicular to the mat. The platform is held by a stiff spring that is compressed when the platform moves. Your workout invovles compressing the spring by pushing on the platform with your feet. After testing compressions of the equipment, you determine that you must do 85.0 J of work to compress the spring a distance 0.170 m from its uncompressed length.What magnitude of force must you apply to hold the platform stationary at the final distance given above
Answer:
500 N
Explanation:
Since the work done on the spring W = Fx where F = force applied and x = compression length = 0.170 m (since the spring will be compressed its full length when the force is applied)
Since W = 85.0 J and we need to find F,
F = W/x
= 85.0 J/0.170 m
= 500 N
So, the magnitude of force must you apply to hold the platform stationary at the final distance given above is 500 N.
An athlete whirls a 8.00 kg hammer m from the axis of rotation in a horizontal circle, as shown in the figure below . The hammer makes one revolution in s. What is the centripetal force on the hammer ?
Answer:
[tex]mv \div r \\ mass \times velocity \div radius[/tex]
Plants cause weathering, too. A seed that falls into a crack in a rock may grow there. Growing roots may push on and enlarge the crack, What is this process called Question 2 options: chemical weathering mechanical weathering root-pry pedalfer
Answer:
c. root-pry
Explanation:
i did the test
The process by which a seed enters a rock fracture and the expanding roots push to widen the fissures is known as mechanical weathering.
What do you mean by mechanical weathering?Machine-induced weathering Mechanical weathering, sometimes referred to as physical weathering and disaggregation, causes rocks to break down. Water, whether liquid or solid, is usually present during mechanical weathering. For instance, liquid water may seep through fractures and fissures in rock.
You may get mechanical weathering from
the reduction in pressure produced on by the removal of subsurface rock.
Water freezes and thaws in the granite's crevices.
Salt crystals are developing inside the rock.
cracking brought on the plant roots and exposed by digging animals
The information is ,
Let's say the weathering looks like A.
Now, plants are to blame since a seed that falls into a fracture in a rock and the seed's expanding roots push and widen the original gap
Weathering from mechanical sources and one mechanical weathering mechanism that fractures rocks is the freezing and spreading of ice in rock cracks.
Moreover, mechanical weathering reduces rocks into microscopic fragments, increasing the surface area of the material as a whole.
Hence, the method is mechanical weathering.
Click here for additional information about mechanical weathering.
https://brainly.com/question/27233034
#SPJ6
what is the total energy a 60W incandescent light bulb in KWh will consume in 336 hours?
(60 W) x (336 hrs) = 20,160 W-hr
That's 20.16 KWh .
How do scientists use patterns?
A. To organize results
B. To describe how something is made
C. To predict what might happen next
D. To send messages to other scientists
Answer:
c because you see with your eyes and c rhymes with eyes
Does anybody know the formula needed to calculate distance given the values for mass, power, and time?
Answer:
Joules/second^2=(Newton×meter)/second^2.
Solving for mass: Kg= (second^3/ meter^2).
A circus stuntman holds himself straight out by his arms from a vertical pole. If the stuntman's center of gravity is located 0.75 m away from the pole and he weights 650 N, how much force do is arms have to apply if they exert their force upwards at 0.10 m away from the pole? [4875 N]
Answer: 4875 N
Explanation:
Given
Stuntman weight is [tex]W=650\ N[/tex]
His center of gravity is located at [tex]x=0.75\ m[/tex] away from pole
If he applies an upwards force at 0.10 m away from the pole
Suppose F is the applied force
To remain vertical, the torque of weight must be canceled by the vertical force
[tex]\Rightarrow 650\times 0.75-F\times 0.10=0\\\\\Rightarrow 650\times 0.75=F\times 0.10\\\\\Rightarrow F=\dfrac{487.5}{0.10}=4875\ N[/tex]
In what way are all sound waves and light waves similar?
Answer:
Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Here are some differences: Sound can only travel through a medium (substance) while light can travel through empty space.
Answer:
Sound and light are similar in that both are forms of energy that travel in waves. They both have properties of wavelength, freqency and amplitude. Here are some differences: Sound can only travel through a medium (substance) while light can travel through empty space.
Explanation:
Hope this helped Mark BRAINLEST
PLEASE HELP QUICKLY!!!
what happens to the motion of objects when they hit each other?
Answer:
When two objects in motion hit each other they experience forces that are equal in magnitude and opposite in direction. This force causes one of the objects to speed up or gain momentum and other to slow down or lose momentum.
A disk 7.90 cm in radius rotates at a constant rate of 1 190 rev/min about its central axis. (a) Determine its angular speed. 124.58 Correct: Your answer is correct. rad/s (b) Determine the tangential speed at a point 2.98 cm from its center. 3.71 Correct: Your answer is correct. m/s (c) Determine the radial acceleration of a point on the rim. magnitude 1.23 Correct: Your answer is correct. km/s2 direction toward the center Correct: Your answer is correct. (d) Determine the total distance a point on the rim moves in 2.06 s. 20.28 Correct: Your answer is correct. m
Answer:
[tex]124.62\ \text{rad/s}[/tex]
[tex]3.71\ \text{m/s}[/tex]
[tex]1.23\ \text{km/s}^2[/tex]
[tex]20.28\ \text{m}[/tex]
Explanation:
r = Radius of disk = 7.9 cm
N = Number of revolution per minute = 1190 rev/minute
Angular speed is given by
[tex]\omega=N\dfrac{2\pi}{60}\\\Rightarrow \omega=1190\times \dfrac{2\pi}{60}\\\Rightarrow \omega=124.62\ \text{rad/s}[/tex]
The angular speed is [tex]124.62\ \text{rad/s}[/tex]
r = 2.98 cm
Tangential speed is given by
[tex]v=r\omega\\\Rightarrow v=2.98\times 10^{-2}\times 124.62\\\Rightarrow v=3.71\ \text{m/s}[/tex]
Tangential speed at the required point is [tex]3.71\ \text{m/s}[/tex]
Radial acceleration is given by
[tex]a=\omega^2r\\\Rightarrow a=124.62^2\times 7.9\times 10^{-2}\\\Rightarrow a=1226.88\approx 1.23\ \text{km/s}^2[/tex]
The radial acceleration is [tex]1.23\ \text{km/s}^2[/tex].
t = Time = 2.06 s
Distance traveled is given by
[tex]d=vt\\\Rightarrow d=\omega rt\\\Rightarrow d=124.62\times 7.9\times 10^{-2}\times 2.06\\\Rightarrow d=20.28\ \text{m}[/tex]
The total distance a point on the rim moves in the required time is [tex]20.28\ \text{m}[/tex].
Una varilla efectúa 120 vibraciones durante un minuto. Hallar el período y la frecuencia del movimiento
A car drives 30 m north in 1.5 seconds and drives 60 east in 2 seconds. What is the average velocity
Answer:
19.2 m/s
Explanation:
From the question,
Velocity = displacement/time = d/t
V = d/t.................................. Equation 1
Average velocity = Total displacement/ total time
Total dispalcement = √(30²+60²) = √4500 = 67.08 m
Total time = 1.5+2 = 3.5 s.
Substitute these value into equation 1
V = 67.08/3.5
V = 19.2 m/s.
Hence the average velocity is 19.2 m/s
The parameter given for the car during transit is 30 m north in 1.5 seconds and drives 60 east in 2 seconds, we want to find the average velocity.
average velocity is 19.2 m/s
Solution
The expression for Average velocity is
Average velocity = Total Displacement/ Total time Taken...............Eqn 1
Total Displacement = √(30²+60²) = √4500 = 67.08 m
Total time = 1.5+2 = 3.5 s.
From the Equation 1
Average Velocity = 67.08/3.5
V = 19.2 m/s.
Therefore, the average velocity is 19.2 m/s
Learn more about average velocity :
https://brainly.com/question/24739297
In a tropic level, energy flows from the producer to the primary consumer and to a secondary consumer. True False
Answer:
True
Explanation:
This is true because in an energy flow, the primary producers such as plants produce their own foods by using energy from the sun. These primary producers are consumed by primary consumers such as rabbits for food, while secondary consumers such as snakes would consume the primary consumers.
By so doing, energy flows from one trophic level to the other.
what is the equation for net force
Answer:
Is to add all forces, for example either the gf = gravitational force
Ff= force fiction
Fn= normal force
Thus, fg + ff + fn = y will give you results
Well then the forces you use in your exercises or questions.
The equation for net force is: ΣF = ma
or, ΣF = Δp/Δt.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
A spring balance can be used to calculate the Force. Newton is the SI unit of force.
Hence, net force applied on the object = mass × acceleration
ΣF = ma
It can be written in another from as:
net force applied on the object = change in momentum ÷ time interval
ΣF = Δp/Δt
So, the equation for net force is: ΣF = ma
or, ΣF = Δp/Δt.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
An arrow is shot at an angle of 35° and a velocity of 50 m/s. How long does it take to return to its original starting height?
Answer:
4.02 s
Explanation:
From the question given above, the following data were obtained:
Angle of projection (θ) = 35°
Initial velocity (u) = 50 m/s
Acceleration due to gravity (g) = 10 m/s²
Time of flight (T) =?
The time of flight of the arrow can be obtained as follow:
T = 2uSineθ / g
T = 2 × 35 × Sine 35 / 10
T = 70 × 0.5736 / 10
T = 7 × 0.5736
T = 4.02 s
Therefore, the time taken for the arrow to return is 4.02 s
PLEASE HELP!!!!!!!!!!!!!
a. A light wave travels through glass (n=1.5) at an angle of 28°. What angle does it have when
it passes from the glass into water (n = 1.33)?
B. Draw a ray diagram to locate the image of the object below. Write one or two sentences to describe the type of image, it’s size relative to the object, and it’s position with respect to the lens.
C. An object is located 94.0 cm from a concave mirror. The focal length is 34.0 cm. What is the image distance? Is the image real or virtual??
D. An Object is located 65.0 cm from a concave lens. The image distance is -11.8 cm. What is the magnification?
E. For a person who is nearsighted, seeing objects that are far away is difficult. The light from these objects does not get focused far enough back in the eye. Write one or two sentences to identify the type of lens that can be used to correct nearsightedness and describe why it works.
PLEAAAASE HELP MEEE
Answer:
A. The angle with which the light passes from glass into water is approximately 31.97°
B. The image formed is, real, inverted, and smaller than the object
C. The image distance is 53.2[tex]\overline 6[/tex] cm
The image is real
D. The magnification is approximately 0.182
E. The type of lens required is a concave lens which corrects the focus of a powerful eye lens or a long eyeball
Explanation:
The given parameters for the light wave are;
The refractive index of the glass medium, n₁ = 1.5
The angle of incidence of the light, θ₁ = 28°
The refractive index of water, n₂ = 1.33
A. Let θ₂ represent the angle with which the light passes from glass into water
Snell's law is mathematically stated as follows;
n₁·sin(θ₁) = n₂·sin(θ₂)
According to Snell's law, we have;
1.5 × sin(28°) = 1.33 × sin(θ₂)
sin(θ) = (1.5 × sin(28°))/1.33 = 0.52947920615
∴ θ₂ = arcsin(0.52947920615) ≈ 31.97°
The angle with which the light passes from glass into water, θ₂ ≈ 31.97°
B. Please find attached the drawing of the image created with Microsoft Visio
From the drawing, we have that the image formed is real inverted smaller than the object and between the focus and radius of curvature
C. The location of the object from the mirror, u = 94.0 cm
The focal length of the mirror, f = +34.0 cm
The mirror formula for a concave mirror is given as follows;
[tex]\dfrac{1}{f} = \dfrac{1}{u} + \dfrac{1}{v}[/tex]
Therefore, we have;
[tex]\dfrac{1}{34.0} = \dfrac{1}{94.0} + \dfrac{1}{v}[/tex]
[tex]\dfrac{1}{v} = \dfrac{1}{34.0} - \dfrac{1}{94.0} = \dfrac{15}{799}[/tex]
[tex]\therefore \dfrac{v}{1} = v =\dfrac{799}{15} = 56.2\overline 6[/tex]
The image distance, v = 799/15 = 53.2[tex]\overline 6[/tex] cm
Therefore the image is in front of the mirror, which is a real image
The image is real
D. The given parameters of the object and lens are;
The distance of the object from the lens, u = 65.0 cm
The distance of the image formed from the lens, i = -18 cm
The magnification, M, is given as follows;
[tex]M = \dfrac{-v}{u}[/tex]
Therefore;
[tex]M = \dfrac{-(-11.8)}{65.0} = \dfrac{59}{325} \approx 0.18153846153[/tex]
The magnification, M ≈ 0.182
E. For a person who is near sighted, the light from objects from distant location are almost parallel and are brought to a focus in front of the retina and therefore, they appear blurred
The use of a concave lens is required to correct nearsightedness as it causes the light to appear come from a point before the focus such that the divergent rays of the object refracted through the concave lens comes to a focus at the.
Compare the concepts of mass and weight. Name three differences.
Answer:
1a)Mass is the amount of matter in the body.
1b)Weight is the measure of the amount of force acting on a mass due to acceleration and gravity.
2a)Mass can never be zero
2b)Weight can be zero if no gravity acts upon an object. like in space
3a) Mass does not change according to location.
3b)Weight varies according to location.
X=Y=MC scourer that would be the answer for you mam or sir
Me das mas información?
Answer:
jello
Explanation:
it jiggles
6. Calculate the pressure exerted on an elevator floor which has an
area of 6 m², if 20 people whose combined force is 1500 N are
standing on it.
Answer:
Hope this helps you out if you could please leave 5 stars or brainiest thank you
Jackie rides her bike to school every day and enjoys playing beach volleyball on weekends. She also helps with tasks around the house, like pulling weeds in the garden and sweeping the porch. Which of the following describes a possible benefit of Jackie's physical activity? (1 point) a Jackie may be less likely to commit to a healthy future. b Jackie may have an increased chance of disease. c Jackie may maintain healthy body fat levels. d Jackie may require more assistance performing daily tasks.
Answer:
The correct answer is - C) Jackie may maintain healthy body fat levels.
Explanation:
Jackie has a very active daily and on weekends routine that includes riding the bike, playing volleyball, pushing weeds, and sweeping the porch. The activities that Jackie is performing daily as well as the time that she spends on exercise may help her to maintain body fat levels.
Being physically active helps in maintaining fat levels in the body of an individual, and it is healthy for the individual.
Thus, the correct answer is - C) Jackie may maintain healthy body fat levels.
Which two elements are the most abundant in the Earth's crust? A. silicon and oxygen B. silicon and magnesium C. iron and nickel D. iron and magnesium
Answer: A. silicon and oxygen
Explanation:
The two most abundance elements in earth's crust are silicon and oxygen.
The most abundant element in earth's crust is Oxygen (O) which has a percentage composition of 46.6%. Oxygen is mainly present as silicates, carbonates, sulphates etc.
The second most abundant element in earth's crust is Silicon (Si) which has a percentage composition of 27.7% . Silicon is present in the form of silicates.
The third most abundant element in earth's crust is aluminium (Al) which has a percentage composition of 8.1 %.
The fourth most abundant element in earth's crust is Iron (Fe) which has a percentage composition of 5.0 %.
Answer:
A
Explanation:
What causes the pressure in a fluid
Answer:
The pressure in a liquid is due to the weight of the column of water above. Since the particles in a liquid are tightly packed, this pressure acts in all directions. For example, the pressure acting on a dam at the bottom of a reservoir is greater than the pressure acting near the top.
Answer:
Fluid pressure can be caused by gravity, acceleration, or forces in a closed container. Since a fluid has no definite shape, its pressure applies in all directions.
Explanation:
How bones do humans have ??
Answer:
206
Explanation:
The axial skeleton, comprising the spine, chest and head, contains 80 bones. The appendicular skeleton, comprising the arms and legs, including the shoulder and pelvic girdles, contains 126 bones, bringing the total for the entire skeleton to 206 bones.
A fully grown adult features 26 bones in the spine, whereas a child can have 34.
Answer:
The human body is made up of 206 bones
Which of the following is true about the diameter of a circle?
A. The diameter is twice the length of the radius.
B. The diameter is twice the length of the circumference.
C. The diameter is half the length of the circumference.
D. The diameter is half the length of the radius.
Answer:
option A
Explanation:
the diameter is twice the length of the radius
hope it helps
What happens to the force between two charges when each charge is doubled and the distance between them is 1/4 its original
magnitude?
Answer:
F' = 64 F
Explanation:
The electric force between charges is given by :
[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]
Where
q₁ and q₂ are charges
r is the distance between charges
When each charge is doubled and the distance between them is 1/4 its original magnitude such that,
q₁' = 2q₁, q₂' = 2q₂ and r' = (r/4)
New force,
[tex]F'=\dfrac{kq_1'q_2'}{r'^2}[/tex]
Apply new values,
[tex]F'=\dfrac{k\times 2q_1\times 2q_2}{(\dfrac{r}{4})^2}\\\\=\dfrac{k\times 4q_1q_2}{\dfrac{r^2}{16}}\\\\=64\times \dfrac{kq_1q_2}{r^2}\\\\=64F[/tex]
So, the new force becomes 64 times the initial force.
4) A drag racer starts her car from rest and accelerates at 10.0 m/s² for a distance of 400 m (1/4 mile). (a) How long did it take the race car to travel this distance? (b) What is the speed of the race car at the end of the run?
Answer:
A) s=1/2at^2
t=√(2s/a)=√(2x400)/10.0)=9.0s
B) v=at
v=10.0x9=90m/s
The public is not yet able to purchase cars powered by hydrogen fuel cells because engineers have to determine how
the cars perform based on which scenario?
O on racetracks
O in real-world conditions
O in flooded environments
O on closed courses
Next
Submit
Save and Exit
return
Answer:
B on EDGE
Explanation:
You have two rocks made of the same material that are at the same
temperature. The first rock has three times the mass of the second rock. How
does the thermal energy of the two rocks compare?
A. The second rock has three times the thermal energy of the first rock
B. The first rick has six times the thermal energy of the second rock
C. The second rock has one-third as much thermal energy as the first rock
D. The rocks have the same amount of thermal energy
Answer:
the rocks have the same amount of thermal energy
Why is coal considered a nonrenewable resource? Check all that apply.
Coal is burned to generate electricity.
Coal power plants give off large quantities of smoke and ash.
Coal forms so slowly that we could use up the supply that exists now.
Coal is available in limited amounts.
Answer:
cola forms so slowly that we could use up the supply that exists now
Answer: c and d
Explanation:
An individual with a mass of 105 kg moves forward with a momentum of 575 kg-m/s. How fast are they traveling?
Answer:
5.47 m/s
Explanation:
p=ma
575=105v
v=575/105
v=5.47 m/s
mark as brainliest