Answer:
10.56 moles of NO will be produced
Explanation:
The balanced reaction of ammonia, NH₃ with oxygen, O₂ is:
4NH₃ + 5O₂ → 4NO + 6H₂O
Where 5 moles of oxygen react with an excess of ammonia to produce 4 moles of nitrogen monoxude.
If 13.2 moles of O₂ react:
13.2 mol O₂ * (4 mol NO / 5 mol O₂) =
10.56 moles of NO will be producedTrue or False; the atomic number always equals the number of protons, neutrons and electrons found in an atom.
"" ANSWER""
Protons are values of atomic numbers that do NOT change, that is, they are located inside the nucleus of the atom, whereas electrons are located in the electrosphere that can gain or lose electrons, the electron has a negative charge and the Proton positive, that is, if in any atom it wins an electron the atom will be negative and if the atom loses it will be positive because we already know that the number of protons does not change. To calculate the number of neutron we have to make the number of rounded atomic mass which becomes mass less the number of protons for example oxygen gas has 8 protons which is the atomic number and has atomic mass 15,999 which rounding up to 16 to find the number of neutrals we do 16-8 = 8 so now we know that oxygen has: 8 protons, 8 electrons and 8 neutrons but the values will not always be the same but the possibility of protons and neutrals having the same value is 75% by my count .
● ○ ● RULES ○ ● ○ ●
Atomic number = number of protons
Atomic mass ROUNDNESS = mass
Number of neutrons = number of protons - mass number
OBSERVATION- EXPLANATION FOR STUDENTS OF 9 YEARS BECAUSE IN THE HIGH SCHOOL UP SOME CHANGES CHANGE.
■■ GOOD STUDIES ■■
Living organisms need energy to carry on their life processes. Photosynthesis is a process that allows for photosynthesizing organisms, such as algae and green plants, to produce their own materials for energy production and survival. This process can be outlined as a simplified chemical equation containing reactants (goes into the process) and products (made/comes out of the process).Using your knowledge of science and figures above, select the choice that accurately expresses photosynthesis.
the correct combo is C
We know sunlight is key factor in photosynthesis so A and D are out.
we also know plants get their bulk by breaking up co2 and using the carbon which releases oxygen as a byproduct so B is also out of the question.
Explain how a long-term environmental change can lead
to the development of a new species.( its a paragraph
Answer:
Humans are modifying the world in many ways, and not all of them for the better. The changes we cause are often severe challenges to animals, plants and microbes in nature, from the introduction of pathogens or exotic invasive species to adding toxic substance or excessive nutrients, or causing climatic change. Often several changes occur at once. Nelson Hairston's lab focuses on freshwater environments, especially lakes and ponds, where some of the species present respond to environmental change with decreases in their numbers, even to the point of extinction, while others may benefit to excess, becoming so dominant that they present problems, as in the case of harmful algal blooms stimulated by nutrient enrichment or climate warming. Hairston's lab studies how individual species, food webs, and whole ecosystems are altered when the environment changes.
One way that some freshwater organisms respond to environmental change is to evolve rapidly. A marked change in the environment favors some characteristics of plants, animals and microbes over others. These character differences are often genetically based so that favored characteristics may increase in the next generation. The shorter the generation time, the faster this evolutionary change can occur. For example, tiny but abundant plankton, eaten by fish and other larger animals, can become adapted to the changed environment within a few years because their generation time is only a few days. Hairston's lab has shown that planktonic "water fleas" (Daphnia), major consumers of suspended algae in lakes, evolved to be tolerant of harmful algae within a decade of the appearance of blooms. This rapid evolution (termed "evolutionary rescue" in conservation biology) raises many intriguing questions, for all environments, not just freshwater: To what extent can we rely on species adapting rather than going extinct when their environment changes? How does the evolution of a species that plays a critical ecological role alter the interactions it has with other species, and the functioning of the entire ecosystem?
classify the following elements under metals, non metals and metalloids, boron, zinc Mercury, silicon, oxygen, nitrogen, sodium
Answer:
Zinc mercury transition metal
Silicon boron metalloid
Oxygen nitrogen non metal
Sodium alkali metal
Explanation:
two types of subatomic particles in the nucleas of an atom
Explanation:
protons and neutrons.....
...
Answer:
The subatomic particles are Protons and Neutrons.
When collecting temperature as a function of time for the reaction of KOH with HCL, which time is most significant
Answer:
At the completion of reaction.
Explanation:
The time when the reaction take places is the most significant time for measuring temperature of the solution because on this time the temperature will decrease or increase. Some reactions releases heat energy upon completion we called them exothermic reactions whereas some absorb heat energy from the surrounding, decreases the temperature which is known as endothermic reaction so measuring temperature at the completion of reaction is the correct time.
Two rocks one weighing 100m and the other weiging 200n are drpped from a 50-m cliff at the same time when both rocks are 10m from the ground and air friction is ignored which is the same
Answer:
Ignore all friction
The number of protons is equal to
a the number of neutrons.
b the atomic mass.
c the number of electrons.
d the atomic number.
Answer:
c the number of electrons
A physical change to a substance
can never be reversed
increase or decrease the mass of a substance
changes to type of matter the substance is made of
changes one or more of the physical properties of a substance
Answer:
4th one
Explanation:
a physical change is something u can see, so if the substance changes its properties then thats a physical change.
En una planta de energía, se produce CO2 gracias a la reacción de combustión del material orgánico con oxígeno para producir CO2, SO2, SO3, NO, NO2 y H2O que son los causantes del efecto invernadero, el SO2 reacciona con H2O para formar H2SO3, causante de la lluvia ácida. En condiciones de gas ideal el SO2 se encuentra a una temperatura de 100°C y 0,5 atm de presión, el volumen ocupado generalmente es de 25 L. 5. La ecuación para hallar el número de moles debe ser: a. Gases ideales: relación entre todas las variables que influyen sobre los gases b. Boyle: relación entre volumen y presión c. Charles: relación entre el volumen y la temperatura d. Gay Lussac: relación entre la presión y la temperatura
Answer:
a. Gases ideales: relación entre todas las variables que influyen sobre los gases
Explanation:
La ecuación del gas ideal da la relación entre las variables; presión, volumen, temperatura y número de moles.
Según la ecuación del gas ideal; PV = nRT
P = presión del gas
V = volumen del gas
n = Número de moles del gas
R = constante de gas
T = temperatura del gas
El número de moles de SO2 se obtiene de;
n = PV / RT
n = 0,5 * 25 / 0,082 * 373
n = 12,5 / 30,586
n = 0,41 moles
If magnesium and nickel were used as electrodes to construct an electrochemical cell like the one shown at right, which metal would form the anode and which the cathode?
anode:
cathode:
Answer:
anode: magnesium
cathode: nickel
Explanation:
edg. 2021
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
Formula for tricarbon hexoxide
if 13 moles of Fe react, what is the mass of FeS produced?
Answer:
1144 g of FeS
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
Fe + S —> FeS
From the balanced equation above,
1 mole of Fe reacted to produce 1 mole of FeS.
Therefore, 13 moles of Fe will also react to produce 13 moles of FeS.
Finally, we shall determine mass of 13 moles of FeS. This can be obtained as follow:
Mole of FeS = 13 moles
Molar mass of FeS = 56 + 32
= 88 g/mol
Mass of FeS =?
Mass = mole × molar mass
Mass of FeS = 13 × 88
Mass of FeS = 1144 g
Therefore, 1144 g of FeS were obtained from the reaction.
Can someone tell me if these are right? I am supposed to be decoding this for my escape room but it seems to be wrong.
Answer:
Q1 is A.
Q2 is right
Q3 is D.....I dont
really know about this one
Q4 is right
A sample containing 0.75 moles of CO2 would contain how many atoms?
Answer:4.5 ×10^22)
Explanation:
no. of particles =no. of mole×avogadro's number of particles no. of particles =0.75×6.02×10^23 no. of particles =4.5 ×10^22
i need help with d and e
Answer:
D: False
E: Ethane
Explanation:
Which is a disadvantage of using chemical indicators?
They are expensive to use.
They measure pH directly.
They must be selected for a narrow pH range.
They do not use electricity to operate.
WILL AWARD BRAINLIEST FOR FIRST CORRECT ANSWER!
Answer:
They must be selected for a narrow pH range.
Explanation:
Indicators are compounds that change to a specific colour in a solution within a specific pH range.
The chemical indicators does not give the exact value of pH. They only provide the range of pH. They must be selected for a narrow pH range. The correct option is C.
What is chemical indicator?The acid base indicators or neutralization indicators are substances which are employed for the visual detection of the end point on the basis of their ability to change colour during the pH change that occurs in vicinity of the end point.
The chemical indicators are usually weak organic acids or bases which change colour in characteristic pH ranges. The particular range or interval of pH in which an acid-base indicator changes its colour is known as the colour-change interval.
Methyl orange is a weak base which changes its colour in the pH range 3.1-4.4 being red below pH 3.1 and yellow above pH 4.4.
Thus the correct option is C.
To know more about chemical indicators, visit;
https://brainly.com/question/13748767
#SPJ6
What is the meaning of social group
Answer:
In the social sciences, a social group is two or more humans who interact with one another, share similar characteristics, and have a collective sense of unity. This is a very broad definition, as it includes groups of all sizes, from dyads to whole societies.
Explanation:
Answer:
The meaning of social group is two or more people who interact with one another, share similar characteristics, and collectively have a sense of unity.
Explanation:
Hope this helped
"pure water does not conduct electricity. But some tap water probably can. Which best explains this?" a . Tap water is H20 b . Pure water is H20 c . Some tap water has minerals, such as iron in it.
Explanation:
"pure water does not conduct electricity. But some tap water probably can."
The reason why pure water does not conduct electricity is due to the absence of mineral and metal containing salts. Pure water is made up of only Hydrogen and oxygen atom as represented by the formula; H2O
Tap water on the other hand are most likely able to conduct electricity due to the presence of these ions. They may arise from impurities or during treatment processes.
The correct options are;
b . Pure water is H2O
c . Some tap water has minerals, such as iron in it.
:)
Why is water called.compound
Answer:
because it's composed of two elements, hydrogen and oxygen. water is technically a molecular compound tho, for it has two hydrogens.
See photo! Calculating mass and percentage yields.
Answer:
see above
Explanation:
check for cfe's
Mr Singh is cooking using wo pans of oiling water. Both pans are made of steel, but one pan has a much thicker base than the other pan. Explain how energy is transferred through the metal pans. Write about particles in your answer.
Answer:
See explanation
Explanation:
When either pan is heated, energy is transferred via conduction. Conduction is the process by which heat is transferred through a material, the average position of the particles remaining the same.
When the pans are heated, the particles in each pan vibrate faster and transfer this energy rapidly to neighboring particles.
The pan with a thicker base has more particles in it than the pan with lighter weight base. Note that, The rate of heat transfer is inversely proportional to the thickness of the material in question. Hence, the thicker the base, the more the number of particles present and the longer the time it takes for the food to cook.
Calculate the concentration of a 220 g solution of calcium chloride (CaCl2) that has a volume of 11 L
Answer: The concentration of the solution is 0.18 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in L
moles of [tex]CaCl_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{220g}{111g/mol}=1.98mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{1.98mol}{11L}=0.18M[/tex]
Therefore, the concentration of the solution is 0.18 M
What does chemistry mean?
Answer:
The definition of chemistry is a branch of science that deals with the form and properties of matter and substances or the interaction between individuals.
1. A wave has a frequency of 800 Hz and a wavelength of 2000 cm. What speed
is this wave traveling?
Answer:
V=f*(wavelength)
V= (800)(20m)
16000m/s
Explanation:
Which substances in the list can be used to write a complete combustion reaction? (4 points)
O 1, 2, and 3
O 2, 3, and 6
O 1, 4, and 5
O 1, 2, and 5
Answer:
B. 2, 3 and 6
Explanation:
The primary materials for a chemic combustion reaction are Fuel + O2 → CO2 + H2O!
Hope this could help! （*＾ワ＾*）
Answer:the answer is B
Explanation:
Why is there no answer
Answer:
i don't know
Explanation:
Pls help will give brainlist
Answer:
D. 5
Explanation:
The coefficient will almost always be the whole number in front of the variable.
example
5(x)= 7
The coefficient would be 5.
Use your knowledge of atoms, bonding, and the periodic table to complete the chemical equation .”CH4 + O2
and predict the products of the chemical reaction on your paper. Label this equation “Initial Prediction.
Answer:
CH4 + O2 = CO2 + H2O.
Answer:
CH4 + O2 = CO2 + H2O.
Explanation: