Answer:
When you add energy to a substance?
One change of state happens when you add energy to the substance. This change of state is called melting. By adding energy to the molecules in a solid the molecules begin to move quicker and can break away from the other molecules. The temperature at which a substance goes from a solid to a liquid is it melting point.
When you remove energy from a substance?
When a substance is heated, it gains thermal energy. Therefore, its particles move faster and its temperature rises. When a substance is cooled, it loses thermal energy, which causes its particles to move more slowly and its temperature to drop.
Explanation:
The addition of energy increases the kinetic energy of the particles, which reduces the intermolecular forces between the particles. Freezing occurs when a liquid becomes a solid and energy is released.
Atoms lose energy when they change from solid to liquid or gas and quid to gas.
On a cold winter day, a steel metal fence post feels colder than a wooden fence post of identical size because: a. The specific heat capacity of steel is higher than the specific heat capacity of wood. b. The specific heat capacity of steel is lower than the specific heat capacity of wood. c. Steel has the ability to resist a temperature change better than wood. d. The mass of steel is less than wood so it loses heat faster. Selected:e. Two of the above statements are true.
Answer:
The specific heat capacity of steel is lower than the specific heat capacity of wood
Explanation:
THERE IS ONLY 1 ON MY assignment i geot dis right please brainlyist
The specific heat capacity of steel is lower than the specific heat of a piece of wood. Therefore, option (2) is correct.
What is the specific heat capacity?Specific heat can be defined as the heat energy required to change the temperature of one unit mass of a substance of a constant volume by 1 °C. The S.I. unit of the specific heat capacity of a material is KJ/Kg.
The thermal capacity of a material is defined as a physical property of a substance. The amount of heat is given to a given mass to create a change in unit temperature.
The mathematical expression of specific heat capacity can be written as :
Q = m C ΔT Where C is the heat capacity.
The specific heat capacity is an intensive property of a substance as it does not depend upon the size of the material.
A steel metal fence post feels colder than a wooden fence post of similar size because the specific heat of steel is lower than the specific heat capacity of wood.
Learn more about specific heat, here:
brainly.com/question/11297584
#SPJ5
A ceiling fan with 90-cm-diameter blades is turning at 64 rpm . Suppose the fan coasts to a stop 28 s after being turned off. What is the speed of the tip of a blade 10 s after the fan is turned off
Answer:
the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
Explanation:
Given;
diameter of the ceiling fan, d = 90 cm = 0.9 m
angular speed of the fan, ω = 64 rpm
time taken for the fan to stop, t = 28 s
The distance traveled by the ceiling fan when it comes to a stop is calculated as;
[tex]d = vt = \omega r\times t= ( \frac{64 \ rev}{\min} \times \frac{2 \pi \ rad}{rev} \times \frac{1 \min}{60 \ s} \times 0.9 \ m) \times 28 \ s\\\\d = 168.89 \ m[/tex]
The speed of the tip of a blade 10 s after the fan is turned off is calculated as;
[tex]v = \frac{d}{t} \\\\v = \frac{168.89}{10} \\\\v = 16.889 \ m/s[/tex]
Therefore, the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
A 1500-kg car travelling 90 km/h[N] collides with a 1200-kg minivan travelling 40 km/h[S]. After the collision, the two vehicles stick together.
a. Calculate the initial momentum of the car and the minivan.
b. Using the law of conservation of momentum, determine the total momentum of the two vehicles after the collision.
c. Calculate the final velocity of the two vehicles after the collision in metres per second.
Answer:
A) car - 37500 kg*m/s, minivan - 13332 kg*m/s
B) 50832 kg*m/s
C) 18.83 m/s
Explanation:
Realize that sticky collisions are modeled by: m1v1+m2v2=(m1+m2) vf
conevert to m/s....car going 25 m/s, minivan going 11.11 m/s
A) p=mv
p(car)=(1500)(25)
p(car)=37500 kg*m/s
p(minivan)=(1200)(11.11)
p(minivan)=13332 kg*m/s
B) 37500+13332=50832 kg*m/s
C) 37500+13332=(1500+1200) vf
50832=2700(vf)
18.83 m/s = vf
HELP DUE TODAY BEST ANSWER GET BRAINLIE
One of the greatest dangers in a tornado is from flying objects. A 15 pound piece of lumber can turn into a flying missile that could severely damage walls and homes. A piece of steel with a mass of 200 pounds and travelling at the same velocity would cause even more damage. Select any evidence from the list below that you could use to explain why a 200 pound piece of steel would cause more damage than a 15 pound piece of wood travelling at the same velocity.
As the kinetic energy of an object increases, the force it can exert on another object decreases.
As the kinetic energy of an object increases, the force it can exert on another object increases.
Objects with more mass have less kinetic energy.
Objects with more mass have more kinetic energy.
As the velocity of an object increases, its kinetic energy decreases.
As the velocity of an object increases, its kinetic energy increases.
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Which of these is the BEST answer for why science is important?
Science can take us to other planets, even if it’s only through a telescope.
Science is part of human nature; it helps answer questions about how the world works.
Science helps us learn to think more critically and weigh evidence better.
Science gives us better tablet computers and games.
QQQUUUUCCCKKKK!!!!!!
A group of particles of total mass 48 kg has a total kinetic energy of 320 J. The kinetic energy relative to the center of mass is 80 J. What is the speed of the center of mass?
What would happen if the molecules in a sample moving entirely ?
Answer:
Molecular scale. The story begins a long time ago
when the idea that molecules are in constant motion
was first discovered. Part of the evidence that you can
see in everyday life was discovered by Robert Brown
about 150 years ago when he used a microscope to
watch how tiny dust particles move.
So how fast do molecules move? It all depends upon
the molecule and its state: molecules in a solid state
move slower than in a liquid state, and much slower
than gas molecules. One estimate puts gas molecules
in the range of 1,100 mph at room temperature. Cool
them down to almost absolute zero and they slow
down to less than 0.1 mph (slower than the average
couch potato). The fact that they are always moving
makes it a challenge to see molecules and make stuff
out of them, but it’s a challenge that scientists
work hard to figure out.
Explanation:
g 4.86 Separators are used to separate liquids of diff erent densities, such as cream from skim milk, by rotating the mixture at high speeds. In a cream separator, the skim milk goes to the outside while the cream migrates toward the middle. A factor of merit for the centrifuge is the centrifugal acceleration force (RCF), which is the radial acceleration divided by the acceleration due to gravity. A cream separator can operate at 9000 rpm (rev/min). If the bowl of the separator is 20 cm in diameter, what is the centripetal acceleration if the liquid rotates as a solid body, and what is the RCF
Answer:
Centripetal Acceleration = 88826.44 m/s²
RCF = 9054.7
Explanation:
First, we will find the value of the centripetal acceleration by using the following formula:
[tex]Centripetal\ Acceleration = \frac{v^2}{r}\\[/tex]
where,
v = linear speed of liquid or separator = rω
ω = angular speed of liquid or separator = (9000 rpm)(2π rad/rev)(1 min/60 s) = 942.48 rad/s
r = radius of seperator = diameter/2 = 20 cm/2 = 10 cm = 0.1 m
Therefore,
[tex]Centripetal\ Acceleration = \frac{(r\omega)^2}{r}\\Centripetal\ Acceleration = r\omega^2\\Centripetal\ Acceleration = (0.1\ m)(942.48\ rad/s)^2\\[/tex]
Centripetal Acceleration = 88826.44 m/s²
Now, for the RCF:
[tex]RCF = \frac{Centripetal\ Acceleration}{g}\\RCF = \frac{88826.44\ m/s^2}{9.81\ m/s^2}\\[/tex]
RCF = 9054.7
Sam moves an 800 N wheelbarrow 5 meters in 15 seconds. How much work did he do?
Answer:
work done= force × displacement
=800×5
=4000J
Explanation:
The amount of work done is the result of the magnitude of force applied and the displacement of the body due to the force applied. Therefore, work done is defined as the product of the applied force and the displacement of the body.
Soap bubbles can display impressive colors, which are the result of the enhanced reflection of light of particular wavelengths from the bubbles' walls. For a soap solution with an index of refraction of 1.21, find the minimum wall thickness that will enhance the reflection of light of wavelength 711 nm in air.
Answer:
the minimum wall thickness that will enhance the reflection of light is 146.9 nm
Explanation:
Given the data in the question;
At the first interface, a phase shift occurs as the incident light is in air that has less refractive index compare to the thin film of soap bubble.
At the second interface, no shift occurs,
condition for constructive interference;
t = ( m + 1/2) × λ/2n
where m = 0, 1, 2, 3 . . . . . .
now, the condition for the constructive interference;
t = mλ/2n
where t is the thickness of the soap bubble, λ is the wavelength of light and n is the refractive index of soap bubble.
so the minimum thickness of the film which will enhance reflection of light will be;
t[tex]_{min[/tex] = ( m + 1/2) × λ/2n
we substitute
t[tex]_{min[/tex] = ( 0 + 1/2) × 711 /2(1.21)
t[tex]_{min[/tex] = 0.5 × 711/2.42
t[tex]_{min[/tex] = 0.5 × 293.80165
t[tex]_{min[/tex] = 146.9 nm
Therefore, the minimum wall thickness that will enhance the reflection of light is 146.9 nm
What is diffraction of light
Answer:
According to "http://ww2010.atmos.uiuc.edu" Diffraction is the slight bending of light as it passes around the edge of an object.
Some examples of Light Defraction would be..
-CD reflecting rainbow colours
-Sun appears red during sunset
-From the shadow of an object
A light bulb is shown below, shining into a concave mirror, with its original light lines visible. Which statement best explains why the image of the bulb appears behind the mirror, as shown? .
A. The original light comes from there.
B. The reflected light comes from there.
C. The original light appears to come from there. This is often indicated with dotted apparent light lines.
D. The reflected light appears to come from there. This is often indicated with dotted apparent light lines.
Answer:
the answer is c
Explanation:
see the light appears from there and with the dotted lines you can clearly see the green line touches the dot okay, then the light appears smaller because of water and light source
The speed limmit on an interstate highway is posted at 75mi/h. What is the speed in kilometers per hour? In feet per second?
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Calculate the first and second order angles for light of wavelength 400. nm and 700. nm of the grating contains 1.00 x 104 lines/cm.
Answer:
[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]
[tex]44.43^{\circ}[/tex], second order does not exist
Explanation:
n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]
[tex]\lambda[/tex] = Wavelength
m = Order
Distance between slits is given by
[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]
[tex]\lambda=400\ \text{nm}[/tex]
m = 1
We have the relation
[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]
The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].
[tex]\lambda=700\ \text{nm}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]
Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.
The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].
Second order angle does not exist.
If matter cannot be created or destroyed, then how do you end up with
rust? Below is the equation for rust.
4Fe + 302 → 2Fe203
oxygen from the air
water in the atmosphere
oxygen from in the metal
there shouldn't be any oxygen
Your question is a "non sequitur", which means "it doesn't follow".
Your "then" doesn't contradict your "If", so no mystery is implied.
Maybe you're trying to say that matter is somehow not conserved in the equation . . . 4Fe + 302 → 2Fe203 . But it is. There are 4 Irons and 6 Oxygens on each side, so conservation is not violated here.
I looked up "rust" on Floogle, and got slapped with pages and pages of chemistry that I don't completely understand. But what it's saying is that rusting is a very complex chemical process, AND it doesn't happen unless there's some water involved.
So the bottom line is that there's a lot more going on than simply
4Fe + 302 → 2Fe203 ,
there's water going in and out of the process at every stage, and when it's all over, you have rusty iron, and mass has been conserved.
A 40 kg rock is rolling toward a town at 4 m/s after an earthquake. Calculate the KE.
Be sure to show your work and include units!
Use the formula KE = 1/2mv2 will brainlist
Answer:
320 J
Explanation:
From the question,
KE = 1/2mv².................. Equation 1
Where KE = Kinetic Energy, m = mass of the rock, v = velocity of the rock
Given: m = 40 kg, v = 4m/s
Substitute these values into equation 1
KE = 1/2(40)(4²)
KE = 20×16
KE = 320 J
Hence the kinetic energy of the rock is 320 J
Find the momentum of a 15 kg object traveling at 7 m/s
What is the momentum
What is the velocity
What is the mass
What equation did you use to solve?
Find the momentum of a 15 kg object traveling at 7 m/s.
The momentum of an object is found by using the following formula:
[tex]\displaystyle p=mv[/tex]
P is the momentum and is measured in kg · m/sm is the mass and is measured in kgv is the velocity and is measured in m/sIn this question, the object is 15 kg and is travelling at 7 m/s. That means the mass is 15 kg and the velocity is 7 m/s.
Since all the needed variables are found, substitute it into the equation:
[tex]\displaystyle p=mv \rightarrow p=15 \times 7[/tex]
Multiply:
[tex]\displaystyle p=105\ kg \times m/s[/tex]
__________________________________________________________
What is the momentum? 105 kg · m/s
What is the velocity? 7 m/s
What is the mass? 15 kg
What equation did you use to solve? p = mv
__________________________________________________________
Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.6-V battery, the current from the battery is 2.07 A. When the resistors are connected in parallel to the battery, the total current from the battery is 8.98 A. Determine R1 and R2. (Enter your answers from smallest to largest.)
Answer:
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
Explanation:
We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.
Formula for resistance is;
R = V/I
R = 12.6/2.07
R = 6.087 ohms
Since R1 and R2 are connected in series.
Thus; R1 + R2 = 6.087 ohms
R1 = 6.087 - R2
We are also told that when they are connected in parallel, the current is 8.98 A.
Thus, R = 12/8.98
R = 1.403 ohms
Thus;
(1/R1) + (1/R2) = 1/1.403
Let's put 6.087 - R2 for R1;
(1/(6.087 - R2)) + (1/R2) = 1/1.403
Multiply through by 1.403R2(6.087 - R2) to get;
1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)
Expanding gives;
1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²
(R2)² - 6.087R2 + 8.54 = 0
Using quadratic formula, we have;
R2 = 2.193 ohms or 3.894 ohms
Thus,
R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894
R1 = 3.894 or 2.193
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
A uniform-density 7 kg disk of radius 0.20 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 42 N through a distance of 0.9 m. Now what is the angular speed
Answer:
The angular speed is 23.24 rad/s.
Explanation:
Given;
mass of the disk, m = 7 kg
radius of the disk, r = 0.2 m
applied force, F = 42 N
distance moved by disk, d = 0.9 m
The torque experienced by the disk is calculated as follows;
τ = F x d = I x α
where;
I is the moment of inertia of the disk = ¹/₂mr²
α is the angular acceleration
F x r = ¹/₂mr² x α
The angular acceleration is calculated as;
[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]
The angular speed is determined by applying the following kinematic equation;
[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]
initial angular speed, ωi = 0
angular distance, θ = d/r = 0.9/0.2 = 4.5 rad
[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]
Therefore, the angular speed is 23.24 rad/s.
PLEASE HELP
Section 1 - Question 6
Wave Movement Through Media
What could be happening to the wave as it travels from left to right?
A
It's moving through a medium whose density stays the same
B
It's moving from a low density medium to a high density medium.
С
It's moving from a high density medium to a low density medium.
D
It's moving from a low density medium, to a high density medium, and then back to a low density medium
Answer: B
Explanation:
Time of the day when the Sun does not shine (___time)
N____N
(will give brainliest to whoever is correct and shows reasoning) What is the acceleration of an object that has a velocity of 60m/s and is moving in a circle of radius 50m?
Answer:
5.0/s
Explanation:
Answer:
b and a it is this that abewsr
An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.
Answer:
B. in the direction of the force
Explanation:
Sana nakatulong
A planet of mass M has a moon of mass m in a circular orbit of radius R. An object is placed between the planet and the moon on the line joining the center of the planet to the center of the moon so that the net gravitational force on the object is zero. How far is the object placed from the center of the planet
Answer:
r =[tex]\frac{ 1 \pm \sqrt{ \frac{m}{M} } }{1 - \frac{m}{M} }[/tex]
Explanation:
Let's apply the universal gravitation law to the body (c), we use the indications 1 for the planet and 2 for the moon
∑ F = 0
-F_{1c} + F_{2c} = 0
F_{1c} = F_{2c}
let's write the force equations
[tex]G \frac{m_c M}{r^2} = G \frac{m_c m}{(d-r)^2}[/tex]
where d is the distance between the planet and the moon.
[tex]\frac{M}{r^2} = \frac{m}{(d-r)^2}[/tex]
(d-r)² = [tex]\frac{m}{M} \ \ r^2[/tex]
d² - 2rd + r² = \frac{m}{M} \ \ r^2
d² - 2rd + r² (1 - [tex]\frac{m}{M}[/tex]) = 0
(1 - [tex]\frac{m}{M}[/tex]) r² - 2d r + d² = 0
we solve the second degree equation
r = [2d ± [tex]\sqrt{ 4d^2 - 4 ( 1 - \frac{m}{M} ) }[/tex] ] / 2 (1- [tex]\frac{m}{M}[/tex])
r = [2d ± 2d [tex]\sqrt{ \frac{m}{M} }[/tex]] / 2d (1- [tex]\frac{m}{M}[/tex])
r =[tex]\frac{ 1 \pm \sqrt{ \frac{m}{M} } }{1 - \frac{m}{M} }[/tex]
there are two points for which the gravitational force is zero
The distance between object from planet will be "[tex]\frac{R}{[1+\sqrt{\frac{m}{M} } ]}[/tex]".
According to the question,
Let,
Object is "x" m from planet center = R - xGravitational force = 0Mass of object = m₁As we know,
→ [tex]Prerequisites-Gravitational \ force = \frac{GMm}{r^2}[/tex]
Now,
→ [tex]\frac{GMm_1}{x^2} = \frac{Gmm_1}{(R-x)^2}[/tex]
→ [tex]\frac{(R-x)^2}{x^2} = \frac{m}{M}[/tex]
→ [tex]\frac{R-x}{x} =\sqrt{\frac{m}{M} }[/tex]
→ [tex]x = \frac{R}{[1+ \sqrt{\frac{m}{M} } ]}[/tex]
Thus the answer above is appropriate.
Learn more:
https://brainly.com/question/11968775
A 430 kg motorcycle starts from rest and accelerates to a speed of 12 m/s.
Calculate the net work done on the motorcycle.
a. 42 kJ
b. 31 kJ
c. 38 kJ
d. 35 kJ
e. none of these
Answer:
Vi = 0
Vf = 12 m/s
ΔV = Vf - Vi
ΔV = 12 m/s
Change in kinetic energy
ΔKE = Kf - Ki
ΔKE = 1/2 mv^2 - 0
ΔKE = 1/2 * 430 kg * (12 m/s)^2
ΔKE = 30,960
ΔKE = 30,960 joules
Work = ΔK
Work = 30,960 J
If you push with a power of 20 Watts
on a 150 Newton object, how long would
it take to push it over the 4.3 m?
Answer:
32.25 s
Explanation:
From the question,
P = W/t.............. Equation 1
Where P = Power, W = work done, t = time.
But
W = F×d................. Equation 2
Where F = force and d = distance
Substitute equation 2 into equation 1
P = F×d/t............... Equation 3
make t the subject of euqation 3
t = (F×d)/P............. Equation 4
Givn: F = 150 N, d = 4.3 m, P = 20 watts.
Substitute these values into equation 4
t = (150×4.3)/20
t = 32.25 s
Cells use nutrients and oxygen to supply the body with the energy it needs. What three-body systems are working together in this situation?
A
nervous, digestive, and circulatory systems
B
digestive, circulatory, and excretory systems
C
circulatory, immune, and respiratory systems
D
digestive, respiratory, and circulatory systems
Answer:
The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.
Explanation:
so the answer is D
A force of 12 N changes the momentum of a toy car from 3kgm/s t0 10kgm/s. Calculate the time the force took to produce this change in momentum.
Answer:
Time = 0.58 seconds
Explanation:
Given the following data;
Initial momentum = 3 kgm/s
Final momentum = 10 kgm/s
Force = 12 N
To find the time required for the change in momentum;
First of all, we would determine the change in momentum.
[tex] Change \; in \; momentum = final \; momentum - initial \; momentum [/tex]
[tex] Change \; in \; momentum = 10 - 3 [/tex]
Change in momentum = 7 kgm/s
Now, we can find the time required;
Note: the impulse of an object is equal to the change in momentum experienced by the object.
Mathematically, impulse (change in momentum) is given by the formula;
[tex] Impulse = force * time [/tex]
Making "time" the subject of formula, we have;
[tex] Time = \frac {impulse}{force} [/tex]
Substituting into the formula, we have;
[tex] Time = \frac {7}{12} [/tex]
Time = 0.58 seconds
Which of the following is generally true for people in their old age?
Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.
Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.
Two 10-cm-diameter charged rings face each other, 21.0 cm apart. Both rings are charged to +40.0 nC. What is the electric field strength ?
Complete question:
Two 10-cm-diameter charged rings face each other, 21.0 cm apart. Both rings are charged to +40.0 nC. What is the electric field strength at the midpoint between the two rings ?
Answer:
The electric field strength at the mid-point between the two rings is zero.
Explanation:
Given;
diameter of each ring, d = 10 cm = 0.1 m
distance between the rings, r = 21.0 cm = 0.21 m
charge of each ring, q = 40 nC = 40 x 10⁻⁹ C
let the midpoint between the two rings = x
The electric field strength at the midpoint between the two rings is given as;
[tex]E_{mid} = E_{right} +E_{left}\\\\E_{right} = \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } \\\\E_{leftt} = -\ \frac{KQ}{(x^2 + r^2)^\frac{2}{3} }\\\\E_{mid} = \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } - \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } = 0[/tex]
Therefore, the electric field strength at the mid-point between the two rings is zero.