Answer:
Loosing energy
Explanation:
As the particles movement in gas slows down further when it is cooled
How many grams are in 0.75 moles of Fe
Answer:
41.88375 g Fe
Explanation:
Using stoichiometry, we can do this problem. First, we put our given. Then we create an equation using the molar mass of Fe (found on the periodic table, which was 55.845 g Fe), and the resulting equation is:
[tex]0.75 mol Fe * \frac{55.845 g Fe}{1 mol Fe}[/tex]
The mol Fe's cancel, and leave us with:
41.88375 g Fe
Good luck.
What are the end products of anaerobic respiration in yeast cell ?
Answer:
glucose ethanol and co2
please follow me and mark it brainliest
Answer:
In anaerobic respiration yeast breaks down glucose, forming ethanol and carbon dioxide as its waste products. When the glucose is nearly used up, and provided that oxygen is present, yeast uses the ethanol as a respiratory substrate to produce carbon dioxide and water in aerobic respiration.
Explanation:
Hope it is helpful....
Which type of plate boundary is associated with seafloor spreading at the source of the spread: convergent, divergent, or transform?
Answer:
The answer is divergent
A cup of coffee is made in the morning by pouring water ov er ground up coffee beans in a piece of paper and by collecting the brown liquid that comes through. Which techniques used
Answer: Filtration technique
Explanation:
The technique used here is called filtration.
Filtration,is a physical separation process that separates a mixture of an insoluble solid from a liquid ( acting as the solvent) by the use of a filter barrier that allows only the fluid to pass through.
In the case from the question,
As water is poured over the ground coffee, it forms a mixture of which the insoluble solid is the coffee grounds, the water is the liquid and the filter barrier is the piece of paper which allows only the brown liquid coffee to pass through as the filtrate.
Which of the following correctly describes the difference (on average) between an electron in a 2s orbital and an electron in a 3s orbital?
Answer:
C: electrons is the 3s orbital are higher than those in the 2s orbital
Explanation:
Looking at the options, the correct one is that the electrons in the 3s orbital will possess more energy than those in the 2s orbital. This is because the the 2s orbitals will be filled with electrons first before the 3s orbital.
Also from basics we know that the energy of an orbital increases as the quantum number increases.
What is the SI unit of time?
A.
second
B.
minute
C.
hour
D. day
Answer:
option a. second
.............
Explain what a catalyst is and give an example of a transition as one.
Answer:
Catalyst, in chemistry, any substance that increases the rate of a reaction without itself being consumed.
...
Catalyst.
process catalyst
ammonia synthesis iron
sulfuric acid manufacture nitrogen(II) oxide, platinum
cracking of petroleum zeolites
A gas at 127 celsius and 10.0 L expands to 20.0 L. What is the new
temperature in kelvin? (You must convert to Kelvin before calculating
this problem
Answer:
T₂ = 800 K
Explanation:
Given that,
Initial temperature of the gas, T₁ = 127°C = 400 K
Initial volume, V₁ = 10 L
Final volume, V₂ = 20 L
We need to find the new temperature.
The volume of a gas is directly proportional to its Kelvin temperature.
Let T₂ is the new temperature. So,
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}\\\\T_2=\dfrac{V_2T_1}{V_1}\\\\T_2=\dfrac{20\times 400}{10}\\\\T_2=800\ K[/tex]
So, the new temperature of the gas is 800 K.
How many atoms of oxygen are in a molecule
of
glucose (C6H1206)?
Be sure to use the correct place value.
Answer:
Um... 6
Explanation:
C6H12O6
The O is oxygen and the 6 is the exact number of atoms
Help! Will give will give brainllest
1. An airplane flies 1431 miles in 2 hours 15 minutes. What is its average speed in miles per hour?
2. A train travels 76 miles in 1 7/12 hours. What is its average speed in miles per hour?
3. An airplane flies 1914 miles in 2 3/4 hours. What is its average speed in miles per hour?
4. A train travels 102 miles in 2 5/6 hours. What is its average speed in miles per hour?
5. Tracy runs 26.2 miles in 3 hours and 45 minutes. What is her average pace in minutes and seconds?
Answer:
1. 636miles/hour
2. 53.65milesper hour
3.696miles per hour
4.37.09mikes per hour
5. 6.99miles/hour
Explanation:
you first convert all the time into improper fractions
then work out speed which is got by dividing distance with time
Will mark brainiest!!!! Also I posted other questions
Answer:
Crash sensors measure how quickly a vehicle slows down in a frontal crash or accelerates to the side in a crash Some vehicles are equipped with a sensing system designed to detect the onset of a rollover crash Rollover crash sensors may be located in the ecu or at the center of the vehicle
The the Crash trip sensors in cars that send an electric signal to an ignitor The heat generated causes sodium azide to decompose into sodium and nitrogen gas which inflates the airbags
Explanation:
have a nice day
how many molecules are in SO4
Answer:
there are 5 molecules in SO⁴
A neutral atom has 12 protons. In chemical bonding, which is the most likely charge of the ion?
A. 2+
B. 1+
C. 2-
D. 6-
what is an acid containg oxygen?
Explanation:
An oxyacid, oxoacid, or ternary acid is an acid that contains oxygen. Specifically, it is a compound that contains hydrogen, oxygen, and at least one other element, with at least one hydrogen atom bonded to oxygen that can dissociate to produce the H+ cation and the anion of the acid.
Answer:
oxyacid, oxoacid
Explanation:
An oxyacid, oxoacid, or ternary acid is an acid that contains oxygen. Specifically, it is a compound that contains hydrogen, oxygen, and at least one other element, with at least one hydrogen atom bonded to oxygen that can dissociate to produce the H+ cation and the anion of the acid.
what is the smallest unit of NaCl?
Answer:
A molecule of Nacl
Maybe
____ NaF + ____ Br2 à ____ NaBr + ____ F2
A. ---, 2, 2, ---
B. 2, ---, ---, 2
C. 2, ---, 2, ---
Answer:
2 NaF + Br2 --> 2NaBr + F2
Explanation:
Well first I notice that there are two flourines on the products side so we need to put a 2 of NaF. Now there are 2 sodiums on the products side so we have to put another two in front of NaBr.
2 NaF + Br2 --> 2NaBr + F2
Students are completing an investigation on types of heat transfer. For one part of the investigation, they place their hand on a cool window and feel the difference in thermal energy. When they are touching the glass, what type of heat transfer are they experiencing?
a .Conduction
b. Convection
c. Radiation
How many atoms of cobalt are in 4 moles of cobalt?
2 × 10²⁴ atoms Co
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
4 mol Co (Cobalt)
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
Set up: [tex]\displaystyle 4 \ mol \ Co(\frac{6.022 \cdot 10^{23} \ atoms \ Co}{1 \ mol \ Co})[/tex]Multiply/Divide: [tex]\displaystyle 2.4088 \cdot 10^{24} \ atoms \ Co[/tex]Step 4: Check
Follow sig fig rules and round. We are given 1 sig fig.
2.4088 × 10²⁴ atoms Co ≈ 2 × 10²⁴ atoms Co
Determine el número de moles presentes en una esfera de titaniode 0.5 cm de radio, sabiendo que la densidad del titanio es de 4507kg/m³. =433
Answer:
0.0493 moles de Titanio
Explanation:
Primero, debemos hallar el volumen de la esfera. Usando la densidad podemos hallar la masa de titanio y usando la masa atómica encontraremos las moles de titanio:
Volumen de la esfera:
Volumen esfera = 4/3π * Radio³
Volumen = 0.5236cm³
En m³ (1m³ = 1x10⁶cm³):
0.5236cm³ * (1m³ / 1x10⁶cm³) = 5.36x10⁻⁷m³
Masa en gramos:
5.36x10⁻⁷m³ * (4507kg / m³) = 2.36x10⁻³kg * (1000g / 1kg) = 2.36g de Titanio
Moles -Masa molar Ti: 47.867g/mol-:
2.36g de Titanio * (1mol / 47.867g) =
0.0493 moles de TitanioA gas at a pressure of 360 torrs and a volume of 750 ml. If the pressure becomes 1.5 atm what is the new volume?
Answer:
V₂ = 236.84 mL
Explanation:
The relation between pressure and volume is inverse.
We can write it as follows :
[tex]P_1V_1=P_2V_2[/tex]
We have,
P₁ = 360 torrs, V₁ = 750 mL, P₂ = 1.5 atm = 1140 torr.
So,
[tex]V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{360\times 750}{1140}\\\\V_2=236.84\ mL[/tex]
So, the new volume of the gas is 236.84 mL.
A student says that since the atomic theory is just a theory, it should not be considered useful. Which
statement best argues against the student's opinion? (2 points)
O Scientific theories change over time.
O Scientists often do not agree about specific details of scientific theories.
O Scientists often propose competing theories.
O Scientific theories do not become Scientific Laws.
O Scientific theories are the results of many experiments and observations.
Answer:
O Scientific theories are the results of many experiments and observations.
Explanation:
Going through the options;
O Scientific theories change over time.
This is true and supports the student's opinion. So wrong option!
O Scientists often do not agree about specific details of scientific theories.
This is true. However, it supports the student's opinion. So wrong option!
O Scientists often propose competing theories.
This is true. However, it supports the student's opinion. So wrong option!
O Scientific theories do not become Scientific Laws.
This is False. Theories that have withstood the test of time and countless experiments become laws. However it support's the student's opinion. So wrong option!
O Scientific theories are the results of many experiments and observations.
This is true and is against the student's opinion. This option is correct!
anyone know this? i’m having trouble...please help.
Plants cannot grow too close together because their Blank______ need to spread out and absorb nutrients from the soil.
their roots need room to spread out
PLS HELPPP ASAP
According to the Periodic Table of Elements, the neutral atom of what element has 4
protons, 5 neutrons, and 4 electrons?
O A. beryllium
O B. boron
OC. fluorine
D. aluminum
What is the molecular formula for C5H7 if its molar mass is 536 g/mol?
Answer:
(C5H7)8
Explanation:
It's empirical formula is given as; C5H7
Molar mass of carbon(C) = 12 g/mol
Molar mass of hydrogen(H) = 1 g/mol
We are told that it's molar mass is 536 g/mol.
To find the molecular formula;
Molecular formula = n × empirical formula
Thus;
n = 536/((12 × 5) + (1 × 7))
n = 8
Thus;
Molecular formula = (C5H7)8
Calculate the molarity for a solution containing 0.34 moles of NaNO3 dissolved in 0.5 liter of
water.
Answer:
0.68 mol/L
Explanation:
M=m/l
m is moles and l is liters
Since they gave us the values in the correct units, all we have to do it plug it in
M=0.34 mol/0.5 liters
M=0.68
When kci dissolved in ethanol what is the intermolecular attraction between k+ ions and ethanol molecules
Answer:
ion-dipole interaction
Explanation:
Ethanol is a polar molecule due to the presence of the polar O-H group in the molecule. This means that the molecule has a dipole moment.
The positive end of the dipole lies on hydrogen while the negative end of the dipole lies on oxygen.
When KCl is dissolved in ethanol, K^+ ions can interact with the negative end of the dipole in ethanol by ion-dipole interaction.
Based on the table above, which amount of a compound dissolved in 100 grams of water at the stated temperature represents a system at equilibrium?
Select one:
a. 40 g NaCl at 70 degrees Celsius
b. 20 g KClO3 at 70 degrees Celsius
c. 80 g NaNO3at 10 degrees Celsius
d. 80 g Pb(NO3)2 at 30 degrees Celsius
Answer:
C. 80g Nano3 at 10 degrees Celsius
Explanation:
I just took the test
80 g NaNO₃ at 10 degrees Celsius of a compound dissolved in 100 grams of water at the stated temperature represents a system at equilibrium. Therefore, option C is correct.
What is solubility ?The maximum quantity of a chemical that will dissolve in a given amount of solvent at a particular temperature is referred to as its solubility.
Different compounds have very varying solubilities, which is a feature of a particular solute-solvent pair.
A substance's physical and chemical characteristics affect how soluble it is. A few other factors and circumstances can also influence it. A few of these are: temperature, pressure, kind of binding, and forces between the particles.
A system is said to be in equilibrium when 80 grammes of a substance, dissolved in 100 grams of water at 10 degrees Celsius.
Thus, option C is correct.
To learn more about the solubility, follow the link;
https://brainly.com/question/28170449
#SPJ2
a = 10 m/s - 5 m/s
5S
Answer:
what is the formula?
Explanation:
This image models…
diffraction
reflection
refraction
absorption
Answer:
reflection is correct answer by my views