What's the effect of mass and speed on kinetic energy

Explanation:

if u apply more force to an object, it accelerates at a higher rate

Answer:

The specific charge is defined as a charge by mass ratio i.e e/m. The charge on an electron (e) = 1.602 X 10-19C. The mass of the electron (m) = 9.1×10−31Kg.

Answer: a. (Q), (T), (E)

              b. (Q), (T), (E), (W)

Explanation: Thermal Energy and Temperature are closely related: when the temperature rises causing atoms or molecules to move, thermal energy is produced. Thermal energy is the energy within the system.

Mechanical Work is the amount of energy transferred due to an applied force.

Chemical Energy is the energy contained in the bonds of chemical structures of the molecules released when a chemical reaction happens.

Given the explanations, let's analyse the situations:

a. For an ice cube to be melting, it has to be absorbing heat, which means its thermal energy is changing and, consequently, so does its temperature;

b. First, the gas inside the cylinder reaches a thermal equilibrium, which means its thermal energy and temperature changed. Since there were  exchange of heat to reach the equilibrium, the gas absorbed or gave off heat. After the equilibrium, when the piston starts to be moved, the energy of the pressure is transferred to the gas, so mechanical work had been done.

Answer:

The time taken by the projectile to hit the ground is 6.85 sec.

Explanation:

Given that,

Vertical height of cliff = 230 m

Distance = 300 m

Suppose, determine the time taken by the projectile to hit the ground.

We need to calculate the time

Using second equation of motion

[tex]s=ut+\dfrac{1}{2}gt^2[/tex]

Where, s = vertical height of cliff

u = initial vertical velocity

g = acceleration due to gravity

Put the value in the equation

[tex]230=0+\dfrac{1}{2}\times9.8\times t^2[/tex]

[tex]t=\sqrt{\dfrac{230\times2}{9.8}}[/tex]

[tex]t=6.85 sec[/tex]

Hence, The time taken by the projectile to hit the ground is 6.85 sec.

Answer:

energy level

s,p

electrons

Explanation:

I already done this trust me

In the notation 1 s² number 1 represents energy levels where electrons are located.The 4 parts on periodic table are s,p,d and f blocks.The 2 in 1 s² represents number of electrons in energy level.

Electrons present in an atom revolve in different orbits which are stationary states and are also called as energy levels. The energy levels are numbered as integers which are also called as principal quantum numbers.

Energy of the stationary state is given as E= -R

1/n² where R

is the Rydberg's constant. When an electron is excited, and it moves from lower to higher energy levels there is absorption of energy, while when it moves from higher energy level to lower energy level it radiates or gives out energy in the form of radiation.

They can also be defined as the distances between electron and nucleus of an atom . Electrons present in K energy level have least energy .Energy level diagrams are studied to understand nature of bonding , placement of electrons in orbits and and elemental behavior under certain conditions.

Learn more about energy level,here:

https://brainly.com/question/12806827

#SPJ2

Answer:

Astrophysicists study the physics of the universe. “Astrophysics” is a term that is often used interchangeably with “astronomy.” Atomic, molecular, and optical physicists study atoms, simple molecules, electrons, and light, as well as the interactions among them

Explanation:

Answer:

A) 10.0 m/s

Explanation:

the formula for average speed is  v=d/t

the distance is 100 meters

The time is 10.0 seconds

so  v=100m/10.0s

       = 10.0m/s

so the runners average speed was 10.0m/s

The average speed of the runner is equal to 10.0 m/s. Therefore, option (A) is correct.

The speed of a body can be described as the distance covered in a definite time interval. The average speed can be defined as a scalar parameter as it possesses magnitude with no direction.

The speed can be determined from the ratio of the distance traveled by the object to the time taken to travel that distance.

The speed of any object can be calculated from the formula equation mentioned below:

Speed =  total distance /time taken

Given, the distance covered by the runner = 100 m

The time taken by the runner, t = 10.0 s

The average speed of the runner can be calculated from the formula as shown below:

Speed = 100/10 = 10 m/s

Therefore, the average speed of the runner is 10.0 m/s.

Learn more about the speed, here:

brainly.com/question/12322912

#SPJ2

Answer:

because it’s on the bottom, and to get to that part of it, think of it like that scene from moana when they go down into the realm of monsters they go through the thick parts to get to the thin parts, soo the cube wouldn’t be nearly able to reach that level

Explanation:

Answer:

the red at the bottom should not count, but the red at the top is the least dense because it floats upon the other liquids

Explanation:

hope this helps

Answer:

physical quantity is a property of a material or system that can be qualified by measurement

[tex] \huge\mathfrak{ANSWER}[/tex]

the quantities by meals of which we describe the law of physics are known as physical quantities.

in order to measure a physical quantity we as you my certain magnitude of this quantity a standard and call its unit of that quantity to express the measurement of any physical quantity two thing must be mentioned.

For Example -:

[tex] \bold{ n_1 (u_1) = n_2(u_2)}[/tex]

Answer:

Heat stroke

Explanation:

Heat Stroke is the most serious heat-related illness and requires immediate medical attention.

Answer:

Heat Stroke is the most serious heat-related illness and requires immediate medical attention. Symptoms include: confusion, fainting, seizures, very high body temperature and hot, dry skin or profuse sweating. CALL 911 if a coworker shows signs of heat stroke.

Explanation:

I HOPE THIS HELPS * pls mark me brainliest }

Answer:

Yes

Explanation:

Answer:

1 Answer. The Periodic Table can predict the properties of new elements, because it organizes the elements according to their atomic numbers. Creating new elements is not a simple process. Scientists use a particle accelerator to smash light atoms into a thin metallic foil that contains heavier atoms.

Explanation:

Answer:

false

Explanation:

i just took the test <3

The period of a pendulum is not directly proportional to the mass of the bob. The period of pendulum is independent of the mass of the bob. Thus, the given statement is false.

A simple pendulum is the one which consists of a small metal ball called as the bob or a mass which is suspended from a fixed point by a long piece of thread such that the bob is free to swing back and forth from its mean position under the influence of the gravity.

The time period of a simple pendulum is the time taken by it to complete one oscillation. The formula for the time period or period (T) of a simple pendulum is T = 2π (√L/g), where L is the length of the pendulum thread and g is the acceleration due to gravity.

Learn more about Pendulum here:

https://brainly.com/question/14759840

#SPJ6

Answer:

first balance hydrogen.

Explanation:

2H2+O2---->2H2O

Answer:

2H^2 + 2H^2O

Explanation:

Put a 2 in front of both H's and the H's will be 4 and the O's will be 2. The chemical equation is balanced.

Answer:

Resistance of A is [tex]6\ \Omega[/tex] and B is [tex]3\ \Omega[/tex]

Explanation:

The voltage across both the resistances will be the same as they are connected in parallel.

V = Voltage = 6 V

[tex]I_B=2\ \text{A}[/tex]

Resistance is given by

[tex]R_B=\dfrac{V}{I_B}\\\Rightarrow R_B=\dfrac{6}{2}\\\Rightarrow R_B=3\ \Omega[/tex]

[tex]V_B=V_b-V_A\\\Rightarrow V_B=6-4\\\Rightarrow V_B=2\ \text{V}[/tex]

Series connection

[tex]V_A=4\ \text{V}[/tex]

The current is constant in series connection

[tex]I=\dfrac{V_B}{R_B}\\\Rightarrow I=\dfrac{2}{3}\ \text{A}[/tex]

[tex]R_A=\dfrac{V_A}{I}\\\Rightarrow R_A=\dfrac{4}{\dfrac{2}{3}}\\\Rightarrow R_A=6\ \Omega[/tex]

The resistance of A is [tex]6\ \Omega[/tex] and B is [tex]3\ \Omega[/tex].

Answer:

A

Explanation:

Answer:

The correct answer to the question will be compass i.e compass is not a part of a DC motor. Various parts of a DC motor are coil of wire, armature, field magnets, brushes and commutator. The coil of wire plays a vital role in DC motor.

Explanation:

Answer:

Power = 2.5 [W]

Explanation:

To be able to solve this problem we must remember that power is defined as the relationship of the work done in a given time interval.

[tex]P=W/t[/tex]

where:

P = power [W] (units of watts)

W = work = 50 [J]

t = time = 20 [s]

Now replacing:

[tex]P=50/20\\P=2.5[W][/tex]

Answer:

2.5

Explanation:

Answer: the answer is a

Explanation:

Answer: F = 6262.2 kN

Explanation: Pressure is defined as force per area. But pressure varies according to the depth of a fluid: in air, it decreases the higher the altitude, while in water, it increases the deeper you go.

So, at the bottom of the tank, besides the pressure of air inside the tank and air outside the tank, there is pressure of water due to its depth.

Pressure due to the depth is calculated as

                                    [tex]P=h.\rho.g[/tex]

h is the depth in m

ρ is density of the fluid, in this case is water, so ρ = 997 kg/m³

g is acceleration due to gravity, which, in this case, is 3.71 m/s²

Then, pressure at the bottom of the tank due to variation in depth is

[tex]P=14.4(997)(3.71)[/tex]

P = 53263.73 Pa or 53.26 kPa

Assuming positive referential is downward, all pressures at the bottom point down, so total or resultant pressure is:

[tex]P_{r}=P_{1}+P_{2}+P_{3}[/tex]

[tex]P_{r}=150+88+53.26[/tex]

[tex]P_{r}=[/tex] 291.26 kPa

At last, pressure is force per area:

[tex]P=\frac{F}{A}[/tex]

[tex]F=P.A[/tex]

[tex]F_{r}=P_{r}.A[/tex]

[tex]F_{r}=291.26.10^{3}(2.15)[/tex]

[tex]F_{r}=[/tex] 626209 N or 626.2 kN

At the cylindrical tank's flat bottom, net force has magnitude 626.2 kN.

Answer:

138 km

Explanation:

Answer:

I) True,  II) False,  III) False,  IV) True    

Explanation:

In this exercise, it is asked to answer different statements, for this we will use the relationship between angular and linear velocity

           v = w r

let's review the claims

I) True. From the initial equation we see that the linear velocity depends on the radius

II) False. All points rotate with the same angular velocity

III) False. Linear velocity changes with radius

IV) True. The angular velocity of all points is the same

At various radial points on a rotating Ferris wheel have, different linear velocity (True), different angular velocity (false), equal linear velocity (false) and equal angular velocity (True).

The angular velocity of a rotating Ferris is calculated as follows;

[tex]\omega = \frac{v}{r} = 2\pi N[/tex]

The linear velocity of a rotating Ferris is calculated as follows;

v = ωr

where;

The linear velocity increases with increase in radius.

Thus, we can conclude that, at various radial points on a rotating Ferris wheel have;

Learn more about angular velocity here: https://brainly.com/question/540174

Answer:

Mean distance = 1.61 x 10^8 km

Explanation:

Given the following data;

Orbital period for Icarus, T2 = 410 days

To find the mean distance of Icarus, we would use Kepler's third law of motion.

According to Kepler's third law of planetary motion, the square of any planetary body's orbital period (P) is directly proportional to the cube of its orbit's semi-major axis.

Mathematically, it is given by the formula;

[tex] (\frac {T_{1}}{T_{2}})^2 = (\frac {r_{1}}{r_{2}})^3 [/tex]

Where;

T1 & T2 is the orbital period of a planetary object.

r1 & r2 is the mean distance of a planetary object.

Also, we know that the orbital period for earth, T1 = 365 days

Mean distance of earth = 1.49x10^8 km

Substituting into the equation, we have;

[tex] (\frac {365}{410})^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]

[tex] (\frac {365}{410}})^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]

[tex] (0.8902)^2 = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]

[tex] (0.7925) = (\frac {1.49x10^{8}}{r_{2}})^3 [/tex]

Cross-multiplying, we have;

[tex] (r_{2})^3 = \frac {1.49x10^{8}}{0.7925} [/tex]

Taking the cube root of both sides;

[tex] r_{2} = 1.61 * 10^8 km[/tex]

1.

6090 J

2.

622 J

I bet so~

Explanation:

We need to use the conservation of energy to help us solve this one.

The energy imparted onto the bullet projectile is equal to the energy imparted into the recoiling gun. We can ignore potential energy and only consider the kinetic energy of the two masses (bullet and gun).

Remember that kinetic energy is expressed as [tex]K_E = \frac{1}{2}mv^2[/tex]

Conservation of energy means that both the gun and the bullet have the same amount of energy.

[tex]\frac{1}{2}m_gv_g^2 = \frac{1}{2}m_b v_b^2[/tex]

We'll want to put the mass terms into the same units. So the gun has a mass of 2340 grams.

Answer: it will take 1000 guitar players for sound intensity level to be 100 dB

Explanation:

Given that;

noise level of a single player = 70 dB

Intensity of one guitar will be;

SL= 10 × log(I/I₀)

where I₀ is hum threshold intensity = 10⁻¹² W/m²

I is intensity of sound produced by 1 guitar

SL is intensity level of one guitar

so we substitute

70 = 10 × log(I/10⁻¹²)

70/10 = log (I/10⁻¹²)

I = 10⁻¹² × 10⁷

I = 10⁻⁵ W/m²  

now Suppose n guitars produce sound intensity of 100 dB, then intensity of n guitars (In) will be;

100 = 10 × log(In/10⁻¹²)

log(In/10⁻¹²)  = 100/10

In = 10⁻¹² × 10¹⁰ =  10⁻² Wm²

we know that Now intensity of 1 guitar I = 10⁻⁵ W/m²

so Intensity of n guitars will be;

n × I = In

n = In / I

we substitute

n = 10⁻² Wm² /  10⁻⁵ W/m²

n = 1000

Therefore, it will take 1000 guitar players for sound intensity level to be 100 dB