if a charged object touches a neutral object it will be a short circuit.
Answer:
will force atom(electrons) within the escort (conductor) to go (move).
Explanation:
The graph shows the amplitude of a passing wave over time in seconds (s) What is the approximate frequency of the wave shown? A. 6 Hz B. 0.2 0.4 Hz
Answer:
0.2 I took the test
Explanation:
I took the test
The time period of the whole wave cycle is 6 seconds but the time period of one complete wave is about 4 seconds here. The inverse of this time period is the frequency, that is 0.2 Hz.
What is frequency ?Frequency by definition is the number of events per unit time. Frequency of a wave is the number of wave cycles in one second. It is the inverse of the time period.
Frequency is directly related to the energy of the wave. As the frequency increases, energy of the wave also increases. In the given graph the wave cycle is given for a time of 6 seconds.
The time period for one complete wave is 4 second from the graph.
thus, T = 4 s
v = 1/T
= 1/4 = 0.2 s⁻¹ or 0.2 Hz
Therefore, the frequency of the wave shown, is 0.2 Hz.
Find more on frequency:
https://brainly.com/question/14316711
#SPJ5
I NEED HELP
The average kinetic energy of the particles of two pieces of iron at the same temperature and mass would be __________.
Question 1 options:
Different
The same
Not equivilent
With in 500 degrees of eachother
Answer:
the answer is different
Explanation:
i took the test
PLEASE HELP ASAP!!!
Answer:
WRITE A ONE PAGE ESSAY TO EXPLAIN THE AUTHOR'S PURPOSE IN WRITING HOM SMART ARE ANIMAL
Explanation:
How does an increase in thermal energy affect the kinetic energy of the particles in each state of matter
Explanation:
when there is an increase in thermal energy, the kinetic energy if the matter increases as well.
Which can make 4 covalent bonds? Carbon, Silicon, or both?
Answer:
I would say both
Explanation:
Each silicon atom has four valence electrons which are shared, forming covalent bonds with the four surrounding Si atoms.
Carbon contains four electrons in its outer shell. Therefore, it can form four covalent bonds with other atoms or molecules. The simplest organic carbon molecule is methane (CH4), in which four hydrogen atoms bind to a carbon atom (Figure 1).
True or false? If two components are connected in series, the current through one component will
always be the same as the current through the other.
the answer is ( True ) .
the current is the same in series circuits .
What is momentum? And it’s types?
Answer:
Momentum is the product of mass and velocity. The two types of momentum are angular and linear.
Explanation:
Answer:
Explanation: (Momentum is mass * velocity. Its units, in the SI system are kilogram meter per second) What is Inertia?
In physics, momentum is the product of mass and velocity. The greater the product of this equation, the greater the momentum. In science, there are two types of momentum: angular and linear, which concern different types of moving objects. However, that is not where the definition stops. The word momentum is also used as part of everyday speech, and is one of the very few physics concept whose metaphorical definition is the same as its actual one.
I HOPE THIS ANSWER WILL HELP YOU!!!
What is the acceleration of the object from 2s to 14s
A sodium vapor lamp omit waves with the frequency of 5.26x10^14 Hz. What is the wavelength of light?
Answer:
[tex]\lambda=5.70\times 10^{-7}\ m[/tex]
Explanation:
The frequency of a sodium vapor lamp, [tex]f=5.26\times 10^{14}\ Hz[/tex]
We need to find the wavelength of light. The relation between wavelength, frequency and speed of light is given by :
[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{5.26\times 10^{14}}\\\\\lambda=5.70\times 10^{-7}\ m[/tex]
So, the wavelength of light is equal to [tex]5.70\times 10^{-7}\ m[/tex].
In what do electromagnetic waves cause disturbances when they transfer
energy?
A. Electric fields only
O B. Both electric and magnetic fields
C. Neither electric nor magnetic fields
O D. Magnetic fields only
Which is the correct definition for sea floor spreading
which of the following is an example of potential energy:
(choose 2)
- a fire
- a book standing still on a shelf in the library
- a printer that is not connected
- your cellphone, when you make a call to someone
Answer:
fire is a potential energy
I got stuck on this question
Answer it 2n
Explanation:
does uranium use turbines
i promise to mark brainliest
A dog exerts a force of 30N to move a wagon 2m in 5s. What is the power of the dog?
help me
Answer:
i do not know
Explanation:
im doing for education too
Answer:
I don't know too . want to help but I don't know how .
Explanation:
sorry bro . I want to have points eeek . :/
A student observes a shadow move across the sun during a solar eclipse. Which list represents the position of Earth, the sun, and the
moon during this event?
A.sun, Earth, moon
B.moon, sun, Earth
C.Earth, sun, moon
D.sun, moon, Earth
The position of the Earth, Sun, and moon during the solar eclipse, a student observes a shadow moving across the sun is Sun, moon, Earth, so option D is correct.
What is a solar eclipse?When the Moon passes in front of the Sun, blocking all or part of Earth's view of it, a solar eclipse occurs. The Moon is closest to the plane of the Earth's orbit when there is a new moon and such an alignment. During a total eclipse, the Moon fully obscures the Sun's disk. Partial and annular eclipses only block out a section of the Sun. A solar eclipse occurs naturally. Solar eclipses were sometimes linked to supernatural sources or interpreted as an ill omen in several ancient and modern societies.
During a solar eclipse, the moon comes in between the earth and the sun therefore the shadow moves across the sun during a solar eclipse observed by the student, the position is Sun, moon, and earth.
To know more about the Solar eclipse:
https://brainly.com/question/4702388
#SPJ6
Help Easy Question and Brainly. What's the answer?????
Answer:
negatively
Explanation:
Answer:
Negatively charged
Explanation:
PLS ANSWER MY QUESTION TOO
32. Increasing the amplitude of a sound wave produces a
sound with
1. lower speed
2. higher pitch
3: shorter wavelength
4. greater loudness
Answer:
4
Explanation:
because amplitude of a sound wave is related to loudness of the sound, so the higher the amplitude, the louder the sound
hope this helps
100%
Sutt S
Kam Scheela MARIO MARTINEZ-HTPhysics.pdf
Test BGK
HW#10
Question: A pinball machine's plunger has a spring constant of 22
N/m and is compressed by 0.04 m to start a 0.006 kg pinball.
1. What is the elastic potential energy before the ball is released?
2. What is the kinetic energy of the pinball the instant it leaves the
spring?
3. What is the speed of the pinball the instant it leaves the spring?
4. If the pinball is moving at 1.3 m/s as it is deflected horizontally
across the top of the pinball machine, how much higher above the
ground is this part of its path when compared to its starting
position?
Squation
Drawing
Ta
Signature
Instructions.
Answer:
1. The elastic potential energy is 0.0176 Joules
2. The kinetic energy of the pinball the instant it leaves the spring is 0.0176 Joules
3. The speed of the pinball the instant it leaves the spring is approximately 2.42212 m/s
4. The height of the part where the pinball is located on the machine above the ground is approximately 0.213 meters
Explanation:
The spring constant of the pinball machine's plunger, k = 22 N/m
The amount by which the pinball machine's plunger is compressed, x = 0.04 m
The mass of the pinball ball, m = 0.006 kg
1. The elastic potential energy, P.E. = 1/2·k·x²
By substitution, we get;
P.E. = 1/2 × 22 N/m × (0.04 m)² = 0.0176 J
The elastic potential energy, P.E. = 0.0176 J
2. At the instant the pinball leaves the spring, the plunger and therefore the force of the plunger no longer acts on the pinball
Since there are no external forces acting on the pinball to increase the speed of the pinball after it leaves the spring, the velocity reached is its maximum velocity, and therefore, the kinetic energy, K.E. is the maximum kinetic energy which by the conservation of energy, is equal to the initial potential energy
Therefore;
K.E. = P.E. = 0.0176 J
The kinetic energy of the pinball the instant it leaves the spring, K.E.= 0.0176 J
3. The kinetic energy, K.E., is given by the following formula;
K.E. = 1/2·m·v²
Where;
v = The speed or velocity of the object having kinetic energy K.E.
Therefore, from K.E. = 0.0176 J, and by plugging in the values of the variables, we have;
K.E. = 0.0176 J = 1/2 × 0.006 kg × v²
v² = 0.0176 J/(1/2 × 0.006 kg) = 88/15 m²/s²
v = √(88/15 m²/s²) ≈ (2·√330)/15 m/s ≈ 2.42212 m/s
The speed of the pinball the instant it leaves the spring, v ≈ 2.42212 m/s
4. The height of the pinball is given by the following kinematic equation of motion;
[tex]v_h[/tex]² = u² - 2·g·h
Where;
[tex]v_h[/tex] = The velocity of the pinball at the given height = 1.3 m/s
u = v ≈ 2.42212 m/s (The initial velocity of the pinball as it the spring)
g = The acceleration due to gravity ≈ 9.8 m/s²
h = The height of the pinball above the ground
We get;
[tex]v_h[/tex]² = 1.3² = 2.42212² - 2 × 9.8 × h
∴ h = (2.42212² - 1.3²)/(2 × 9.8) ≈ 0.213
The height of the part where the pinball is located on the machine above the ground, h ≈ 0.213 m
15. How mh energy does a 850W microwave transfer reheating a meal for 30s?
Answer: 25500 joules
Explanation: E = P x t
I NEED THIS ANSWERED ASAP WITH THE RIGHT ANSWER
A bicycle with a 15 kg mass is easily stopped when a force of 60 N is applied. How much force would be needed to stop the bicycle if the time allowed to stop the bike was doubled?
Answer:
Going downhill at a steady speed, the forces along the direction of motion are:
net force = m * a = 0
W * sin(7) - Fdrag = 0
so Fdrag = m * g * sin(7) where m=62.kg and g=9.8m/sec^2
Explanation:
Use the picture to answer the question below-
Which change in wave properties would show as an increase in amplitude?
H E L P P P P
Why does the moon appear to change its shape as seen from Earth
A.Different parts of the sunlit moon become visible as the moon revolves around the Earth
B.Different parts of the moon are lit as the moon rotates
C.The moon moves farther and then closer to Earth
D.The sun lights different parts of the moon during different seasons
Answer:
Explanation:
Why does the moon appear to change its shape as seen from Earth
HELP PLZ
What would it mean if an object had no potential energy?
As a cold air mass advances on a warm air mass, what usually comes before it?
Answer: A cold front occurs when a cold air mass advances into a region occupied by a warm air mass. If the boundary between the cold and warm air masses doesn't move, it is called a stationary front.
Explanation: Two types of occluded front exist: the warm-type and the cold-type. They’re distinguished by the relative temperatures of the air mass ahead of the occlusion – in other words, the air mass ahead of the original warm front – and the air mass behind the cold front. If the air behind the cold front is colder than the air ahead of the occlusion, it shoves beneath that air (because it’s denser) to form a cold-type occluded front. If the air behind the cold front is warmer than the air ahead, it rides over it to form a warm-type occluded front – which appears to be the more common case. In either situation, the lighter warm air representing the air mass originally between the warm and cold fronts sits above the boundary between the two cooler air masses.
Hope this helps!!
Explain
8. How do you know that
the bicyclists in the first
panel above are moving
at a constant velocity?
Answer:
Constant velocity means that the object in motion is moving in a straight line at a constant speed. You know this as in the first panel each arrow representing each second is the same width apart, therefore you know the cyclists are moving at a constant velocity. Compare this to the second box representing changing speed. The arrows are different lengths meaning each second the cyclists are moving at a different speed and are not moving at a constant velocity.
Hope this helped.
What do the arrows in this photograph represent?
A. Gravity and air resistance
B. An action-reaction force pair
C. A pair of unbalanced forces at work
D. Friction and air resistance
Answer: B An action-reaction force pair
Explanation: Took the exam
The arrows in this photograph represent: An action-reaction force pair. Hence, option (B) is correct.
What is action-reaction force pair?When two bodies interact, they exert an equal and opposite force on one another in accordance with Newton's third law of motion. Action-reaction forces are made up of these forces.
"When one body exerts a force on the other body, the first body experiences a force that is equal in magnitude in the opposite direction of the force which is exerted," according to Newton's third law of motion.
According to the above assertion, there are always two forces operating on the objects involved in an interaction. The forces are of identical magnitude, but the direction of the force acting on the first object is different from the direction acting on the second.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
How do vaccines provide immunity
Answer:
Vaccines contain weakened or inactive parts of a particular organism (antigen) that triggers an immune response within the body. Newer vaccines contain the blueprint for producing antigens rather than the antigen itself.
Answer: They give you a portion of the thing its fighting so it gets your cells use to it so they can fight it off easily
Explanation:
What happens when a pebble lying on the ground is kicked?
A. Energy is completely lost.
B. Energy is created.
C. Energy is destroyed.
D. Energy is transferred.
Answer:
I'm 100% sure it's D. but if it isn't, sorry :(
From an apple tree 2 metres high, a 100g mass apple fell of the tree, what work did it do?
Answer:
Workdone = 1.96 Nm
Explanation:
Given the following data;
Mass = 100g to kg 100/1000 = 0.1Kg
Distance = 2m
To find the workdone;
First of all, we would determine the force acting on the apple
Force = mass * acceleration due to gravity
But, acceleration due to gravity is equal to 9.8m/s²
Force = 0.1 * 9.8
Force = 0.98N
Now, we can find the workdone using the formula;
Workdone = force* distance
Substituting into the equation, we have
Workdone = 0.98 * 2
Workdone = 1.96 Nm