Answer:5 1/2. occurred the other day i think
Explanation:
an archer releases an arrow toward a Target the arrow travels 166 m in 2 seconds what is the speed of the arrow
the speed of arrow is 83m/per second
that means
83metres = 1 second
●The arrow would cover the distance of 83 metres in 1 second
may this helps you
bye
w
In your own words, what does the law of
conservation of energy tell us? Hint: It is
VERY similar to the law of conservation
of matter (we studied that in the first
semester).
Answer:
The law of conservation of mass States that matter can never be created or destroyed during c
Can you identify what object is being represented by the model on the right? gear clock battery
Answer:gear
Explanation:just did it right now
Answer: Gear
Explanation: just did it on Edge 2021
Approximately how many formula units of NaCl are in 116.88g of table salt (NaCl), knowing that the molar mass of NaCl is 58.44g/mol?
Answer:
116.88g of table salt (NaCl) contains two formula units
Explanation:
Now,
We know that 1 formula unit of sodium chloride has a molar mass of 58.44g/mol
Hence;
Mass of 1 formula unit = 58.44g
Mass of x formula units = 116.88g
x = 116.88g * 1 formula unit/58.44g
x = 2 formula units
Therefore;
116.88g of table salt (NaCl) contains two formula units
Answer:
There are 1.2044 × 10²⁴ formula units of NaCl in 116.88 g of table salt (NaCl)
Explanation:
A formula unit is an empirical formula of the smallest collection or number of atoms in an ionic or covalent combination from which a compounds formula can be established and which are used to represent the compound stoichiometrically
Sodium chloride is an ionic compound and is represented by the formula unit NaCl as it composed of ions and is not therefoe represented by a molecular formula
The given mass of the table salt, NaCl = 116.88 g
The molar mass of NaCl = 58.44 g/mol = The mass of 1 mole of NaCl
1 mole of NaCl contains one Avogadro's number or 6.022 × 10²³ formula units of NaCl,
∴ 58.44 g of NaCl contains 6.022 × 10²³ formula units of NaCl
116.88 g of NaCl will have (116.88/58.44) × 6.022 × 10²³ = 1.2044 × 10²⁴ formula units of NaCl
The number of formula units of NaCl in 116.88 g of table salt (NaCl) = 1.2044 × 10²⁴ formula units of NaCl.
differentiate between a promoter and an inhibitor
Promoters are substances that increase the catalytic activity, even though they are not catalysts by themselves.
Inhibitors are sometimes referred to as "negative catalysts" since they decrease the reaction rate.
A student collects 25 mL of gas at 0.98 bar. What volume would this gas occupy at 1.013 bar? * 3 points 25.8 mL 24.2 mL .09 mL 34.7 mL
Answer:
24.2 mL.
Explanation:
Assuming constant temperature, we can solve this problem using Boyle's law, which states:
P₁V₁=P₂V₂Where:
P₁ = 0.98 barV₁ = 25 mLP₂ = 1.013 barV₂ = ?We input the data:
0.98 bar * 25 mL = 1.013 bar * V₂And solve for V₂:
V₂ = 24.18 mLThe closest option is the second one: 24.2 mL.
Describe the energy in nuclear fuel and the way in which it’s converted to electrical energy. Write 50 to 100 words.
Explanation:
You will have to rewrite this in your own words please. Download the app Paraphrase and also download Plagiarism Checker. Go on Paraphrase first and write it out then go to Plagiarism second and it'll tell you if you still need to reword it.
Answer:
A nuclear reactor produces electricity in much the same way other power plants do. The chain reaction produces the energy, which turns water into steam. The pressure of the steam turns a generator, which produces electricity.
Explanation:
Nuclear energy originates from the splitting of uranium atoms a process called fission. In nuclear fission, atoms are split apart to form smaller atoms, releasing energy. Fission takes place inside the reactor of a nuclear power plant. At the center of the reactor is the core, which contains uranium fuel. The uranium fuel is formed into ceramic pellets. Inside each uranium fuel pellet, there are millions of uranium nuclei. When these nuclei are split, a huge amount of energy is released. Some of this energy is from radiation, but the biggest source is kinetic energy. This is the energy that produces heat inside a reactor. The heat produced during nuclear fission in the reactor core is used to boil water into steam, which turns the blades of a steam turbine. As the turbine blades turn, they drive generators that make electricity. Nuclear plants cool the steam back into water in a separate structure at the power plant called a cooling tower, or they use water from ponds, rivers, or the ocean. The cooled water is then reused to produce steam.
Define what coal is, explain how it forms, and what it is
used for today
Answer:
the main use of coal in the United States is to generate electricity.
Coal is a combustible black or brownish-black sedimentary rock with a high amount of carbon and hydrocarbons
Coal is formed when dead plant matter decays into peat and is converted into coal by the heat and pressure of deep burial over millions of years.
What is to dissolve?
Answer:
(with reference to a solid) become or cause to become incorporated into a liquid so as to form a solution.
molecular formula of CH2O, 120 g/mol
Why might the ability to produce three-dimensional images of organs be helpful in diagnosing a patient's ailment?
Answer:
Explanation: The body is largely composed of water molecules. Each water molecule has two hydrogen nuclei or protons. MRI takes advantage of the high prevalence of hydrogen in the body and the magnetic properties of the proton in a hydrogen atom. Hydrogen atoms induce a small magnetic field due to the spin of this atom's proton.
Is a mixture with the same composition throughout
Answer:
A homogeneous mixture
Explanation:
A homogeneous mixture has the same composition throughout
¿Las cargas eléctricas forman parte de los átomos?
Answer:
si. en los atomos los protones y los electrones llevan cargas electricas
The system international (SI) unit for energy is:
Question
The system international (SI) unit for energy is:
Answer: joule
PLZ BRAINLIEST+THANKS :)
For the night yet balanced equation, No + CuCl2 —> Cu + NiCl3, if you started with 12.00 g of nickel and 42.00 g of CuCl2, how much Copper would you expect to produce Perdue
Answer:
19.45g of Cu are expect to be produced
Explanation:
Based on the reaction:
2Ni + 3CuCl2 → 3Cu + 2NiCl3
2 moles of Ni react with 3 moles of CuCl2 to produce 3 moles of Cu
To solve this question we must find the moles of each reactant in order to find the limiting reactant. With the limiting reactant we can find the moles of Cu produced and the mass as follows:
Moles Ni -Molar mass: 58.6934g/mol-
12.00g * (1mol / 58.6934g) = 0.204 moles Ni
Moles CuCl2 -Molar mass: 134.45g/mol-
42.00g * (1mol / 134.45g) = 0.312 moles CuCl2
For a complete reaction of 0.204 moles of Ni are required:
0.204 moles Ni * (3 moles CuCl2 / 2 moles Ni) = 0.306 moles of CuCl2
As there are 0.312 moles, CuCl2 is the excess reactant and Ni is limiting reactant.
Moles Cu:
0.204 moles Ni * (3moles Cu / 2 moles Ni) = 0.306 moles of Cu are produced
Mass Cu:
0.306 moles of Cu * (63.546g / mol) =
19.45g of Cu are expect to be produced2. What element is found in compounds that control all chemical changes in your body?
Answer:
???????
Explanation:
What effect does the addition of a catalyst have on a chemical reaction at equilibrium?
A.
It increases the rate of the forward reaction, only.
B.
It increases the rate of the reverse reaction, only.
C.
It increases the rate of both the forward and reverse reactions.
D.
It decreases the rate of both the forward and reverse reactions.
Answer:
C
Explanation:
In the presence of a catalyst, both the forward and reverse reaction rates will speed up equally. :)
What is required to make a fire? Is it exothermic or endothermic?
Answer:
Combustion as an Exothermic Reaction
Explanation:
When substances burn, they usually give off energy as heat and light. The combustion of wood is an exothermic reaction that releases a lot of energy as heat and light.
Answer:
Exothermic
Explanation:
because exothermic causes fires while endothermic doesn't
1. Take 2-3 crystals of potassium permanganate and dissolve them in 100 mL of water.
2. Take out approximately 10 mL of this solution and put it into 90 mL of clear water.
3. Take out 10 mL of this solution and put it into another 90 mL of clear water.
4. Keep diluting the solution like this 5 to 8 times.
5. Is the water still coloured?
Answer:
2
Explanation:
1. Take 2-3 crystals of potassium permanganate and dissolve them in 100 mL of water.
2. Take out approximately 10 mL of this solution and put it into 90 mL of clear water.
3. Take out 10 mL of this solution and put it into another 90 mL of clear water.
4. Keep diluting the solution like this 5 to 8 times.
5. Is the water still coloured?
Acid rain due to air pollution when water reacts with sulfur dioxide, nitric oxide, and carbon dioxide, causes
Answer:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
Explanation:
differentiate between homogenous and heterogeneous catalysis
Explanation:
Homogeneous catalysts are those that occupy the same phase as the reaction mixture (typically liquid or gas), while heterogeneous catalysts occupy a different phase. Generally, heterogeneous catalysts are solid compounds that are added to liquid or gas reaction mixtures.
Sarah is running a race and is almost to the finish line. In the last 5 seconds, her velocity changes from 2m/s to 4m/s. What is her average acceleration during the last 5 seconds of the race?
Answer:
[tex]\boxed {\boxed {\sf a= \frac {2}{5} \ or \ 0.4 \ m/s^2}}[/tex]
Explanation:
Acceleration is found by dividing the change in velocity by the time. The formula is:
[tex]a= \frac {v_f-v_i}{t}[/tex]
where [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex] is the initial or starting velocity, and [tex]t[/tex] is the time.
Her velocity changes from 2 meters per second to 4 meters per second in the 5 seconds. Therefore:
[tex]v_f= 4 \ m/s \\v_i= 2 \ m/s \\t=5 \ s[/tex]
Substitute the values into the formula.
[tex]a= \frac { 4 \ m/s- 2 \ m/s}{5 \ s}[/tex]
Solve the numerator and subtract.
[tex]a= \frac { 2 \ m/s}{5 \ s}[/tex]
Divide.
[tex]a= \frac{2}{5} \ m/s/s= \frac{2}{5} \ m/s^2[/tex]
This can also be written as a decimal.
[tex]a=0.4 \ m/s^2[/tex]
Her average acceleration during the last 5 seconds of the race is 2/5 or 0.4 meters per square second.
Answer:
Solution :-Here
Initial velocity = 2 m/s
Final velocity = 4 m/s
Time = 5 sec
v = u + at
4 = 2 + a(5)
4 - 2 = a(5)
2 = 5a
2/5 = a
Hence, acceleration is 2/5 m/s²
How many grams of H2O would be made from 7.9 moles of H2? (Round to one decimal place)
Answer:
2.01588 grams
Explanation:
What makes an atom stable?
a. Having the nucleus in the center
b. Being very small
c. Being neutral
d. Having the right number of protons and neutrons
Calculate the volume in mL of 53.2 g of .251M solution of HCl.
Show work please
Answer:
5.813 mL
Explanation:
You need to use the formula : vol = mass / molar mass x molarity
the molar mass of HCl is 36.46 and the problem gives you the rest of the equation
0.251M x 36.46 = 9.151
53.2g / 9.151 = 5.813 mL
*I don't know some of the units so that's why some of them are blank sorry
*I'm also sorry if this is wrong but it's what I did so..
What is the total number of grams of HI in 0.500 liter of
1.00 M HI?
64.0 g
128 g
1.00 g
0.500 g
Answer:
The amount of HI is "64 grams".
Explanation:
The given values are:
Volume,
= 0.500 L
Molarity,
= 1.00 H
Molar mass of HI,
= 128
Now,
The moles of HI will be:
= [tex]Molarity\times Volume[/tex]
On substituting the values, we get
= [tex]1.00\times 0.500[/tex]
= [tex]0.5 \ mol[/tex]
hence,
The amount of HI will be:
= [tex]Moles\times Molar \ mass[/tex]
= [tex]0.5\times 128[/tex]
= [tex]64 \ grams[/tex]
If a 28.0 L balloon with a temperature of
25 °C is cooled in a refrigerator, what will
be the volume of the balloon be when it
reaches 5 °C?
Answer:
5.6 L
Explanation:
We can apply Charles' Law here since our pressure is constant (will not change inside the refrigerator) and we are relating change in volume with change in temperature:
V₁ / T₁ = V₂ / T₂ where V₁ and T₁ are initial volume and temperature, and V₂ and T₂ are final volume and temperature. Let's plug in what we know and solve for the unknown:
28.0 L / 25 °C = V₂ / 5 °C => V₂ = 5.6 L
5.6 L is our new volume (at 5 °C).
Balance the following skeletal equation:
Li(s) + H2O(1) -------> -------> LiOH(aq) + H2(g).
Answer:
I think above answer is fully correct. Mark it brainliest
2-ciclopropilpropano
Answer:
cool
Explanation:
How does energy from the Sun drive the cycling of matter?
Answer:
solar energy drives the cycle by evaporating water from the oceans, lakes, rivers, and soil. As liquid water evaporates or transpires, it forms water vapor and clouds, where water droplets eventually gain enough mass to fall back to Earth as precipitation.