Answer:
10 L
Explanation:
The equation of the reaction is;
2BaO2 = 2BaO + O2
Number of moles of BaO2 = 114.7 g/169.33 g/mol = 0.677 moles
From the reaction equation;
2 moles of BaO2 yields 1 moles of O2
0.677 moles of BaO2 yields 0.677 * 1/2 = 0.3385 moles of oxygen
Hence;
PV=nRT
V = ?
P = 127400 Pa or 1.257 atm
T = 455 K
n = 0.3385 moles
R = 0.082 atmLmol-1K-1
V = nRT/P
V = 0.3385 * 0.082 * 455/1.257
V= 10 L
Two tons of water is pumped into a tank 15 ft. High in 5 minutes. Determine the power output of the pump. (Note: One ton is equal to 2,000 lb. And remember to convert the minutes to seconds.)
Answer:
200 lb•ft/s
Explanation:
From the question given above, the following data were obtained:
Force (F) = 2 tons
Time (t) = 5 mins
Height (h) = 15 ft
Power (P) =?
Next, we shall convert 2 tons to pound. This can be obtained as follow:
1 ton = 2000 lb
Therefore,
2 tons = 2 × 2000
2 tons = 4000 lb
Next, we shall convert 5 mins to seconds. This can be obtained as follow:
1 min = 60 s
Therefore,
5 mins = 5 × 60
5 mins = 300 s
Finally, we shall determine the power of the pump. This can be obtained as follow:
Force (F) = 4000 lb
Time (t) = 300 s
Height (h) = 15 ft
Power (P) =?
P = F × h / t
P = 4000 × 15 / 300
P = 60000 / 300
P = 200 lb•ft/s
Thus, the power of the pump is 200 lb•ft/s
Answer:
It's 200 ft-lb/sec
Explanation:
I did it before!
Which property of sulphuric acid makes it suitable to use as a catalyst for the preparation of esters?
How many atoms are in 25.0 moles of calcium (Ca)?
Answer:
1.8066e+24 is the answer
helllllppppppp pleaseeeeeee
What can be concluded from the following statements about a property of metats? • Acast-iron skillet on a stove is used to try bacon • A metal spoon left in a pot of soup heating on a stove is too hot to touch - An aluminum playground slide gets hot on a summer day. O A Metals combine with nonmetals.O B. Metals are good insulators. O C Metals conduct electricity D Metals conduct heat.
Answer:
D - metals conduct heat
HELP!! 30 POINTS!!!! What does the energy graph look like for this reaction??
C3H8+5O2 -> 3CO2+4H2O
I have the data, I just need to know how to make the graph, please!!
total enthalpy of reactants= -103.85
total enthalpy of products= =-2147.81
=-2043.96 kJ/mol exothermic reaction
Answer:
Bottle Nose Dolphin ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
19) Which one of the following statements describes a chemical property of hydrogen gas?
A) Hydrogen gas has a density of 0.00009 g/cm’ at STP.
B) Hydrogen gas burns in air.
C) Hydrogen gas has a boiling point of 20. K at standard pressure.
D) Hydrogen gas is colorless.
. Chalk is made of CaCO 3 . How many molecules are in 5 grams of chalk?
Answer:
20.02 grams of chalk.
Explanation:
A 2.50 L sample of butane gas (C4H10), measured at 22.0
oC and 1.20 atm pressure, is combusted completely and
the carbon dioxide gas collected at the same pressure and
temperature. What volume of CO2 is produced?
Answer:
Same i guess hdjekfhkshfjfkr
The resultant volume of the carbon dioxide gas which is produced by the combustion of butane is 14.4L.
How do we calculate the moles of gas?Moles of any gas will be calculated by using the ideal gas equation as:
PV = nRT, where according to qustion for butane gas
P = pressure = 1.20 atm
V = volume = 2.50L
n = moles = ?
R = universal gas constant = 0.082 L.atm / K.mol
T = temperature = 22 degree celsius = 295.15 K
On putting values we get
n = (1.20)(2.50) / (0.082)(295.15) = 0.124 moles
Given chemical equation is:
C₄H₁₀ + 13/2O₂ → 4CO₂ + 5H₂O
From the stoichiometry of the reaction, it is clear that,
1 mole of C₄H₁₀ = produces 4 moles of CO₂
0.124 mole of C₄H₁₀ = produces 4×0.124=0.496 moles of CO₂
Now we calculate the volume for the carbon dioxide gas at the given pressure and temperature as:
V = (0.496)(0.082)(295.15) / (1.20) = 14.4 L
Hence required volume of CO₂ is 14.4 L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/24236411
#SPJ2
(PHYSICAL SCIENCE) Help please !!
True or false?
A limitinh factor is an environmental factor that increases the growth of a population
True or false?
Biomes are characterized by temperature, precipitation, and the plant and animal communities that live there
Each solute in the table is mixed in a volume of 500 mL of water. Organize the solutions from least conductive to most conductive.
A)
4,2,1,3
B)
4, 1, 2, 3
C)
2, 4, 3,1
D)
1, 3, 4,2
Answer:
b
Explanation:
Answer:
B) 4,1,2,3
Explanation:
Did it on USA Test prep. :)
Mm 2mCOO 19. Calculate the hydrogen-ion concentration [H+] for the aqueous solution in which [OH-] is 1 x (3 points) 10-11 mol/L. Is this solution acididc, basic, or neutral? Show your work.
Answer: The hydrogen-ion concentration for the aqueous solution is [tex]10^{-3}mol/L[/tex] and solution is acidic.
Explanation:
pH or pOH is the measure of acidity or alkalinity of a solution.
pH is calculated by taking negative logarithm of hydrogen ion concentration and pOH is calculated by taking negative logarithm of hydroxyl ion concentration.
[tex]pOH=-\log [OH^-][/tex]
Putting in the values:
[tex]pOH=-\log[1\times 10^{-11}][/tex]
[tex]pOH=11[/tex]
[tex]pH+pOH=14[/tex]
\[tex]pH=14-11=3[/tex]
[tex]pH=-log[H^+][/tex]
[tex]3=-log[H^+][/tex]
[tex][H^+]=10^{-3}M[/tex]
As pH is less than 7, the solution is acidic.
bromine water can be used to distinguish between these two molecules?? true or false
Answer:i dkd
Explanation:
jsach
6.
Ammonia (NH3) acts as a weak base in aqueous solution. What is the acid that reacts with this base
when ammonia is dissolved in water?
(A) NHA
(B) H2O
(C) Oxygen, which is always dissolved in water
(D) None of the above, there are no acids in pure water
Answer:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on eight comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you.!Explanation:
Ammonia acts as a weak base in aqueous solution. Water is the acid that reacts with this base when ammonia is dissolved in water.
What is a base?According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.
Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.
They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.
Learn more about base,here:
https://brainly.com/question/12445440
#SPJ6
what is the pH when h+=0.045 M?
Answer:
pH≈1.35
Explanation:
-log(0.045)≈1.35
Question 15 (3 points)
How are cations and anions related to metals and nonmetals?
Answer:
uff mere dil ma ture kali chadiya ha uff tumi apne buni ha
Answer:
Cations (positively-charged ions) and anions (negatively-charged ions) are formed when a metal loses electrons, and a nonmetal gains those electrons. ... And all of them form an anion with a single negative charge.
Help please see attached screenshot
Answer:
balanced equation of glucose
6CO2 + 6H2O----------C6H12O6 + 6O2
in the presence of sun light.
Covert 50oC to k
(I’ll mark you as brainlister)
Answer:
323 K
Explanation:
To convert Celcius to kelvin first you need to remember this equation:
C + 273 = K (K = kelvin and C = celsius)
Next, you substitute with what you have given:
50 + 273 = K
Solve the equation by adding 50 and 273
k = 323
What causes a substance to be hydrophobic?
After eating, nutrients must be oved to other parts of the body. Which of the following systems will transport these nutrients.
nervous
digestive
circulatory
excretory
Answer:
The circulatory system
Explanation:
A solution's hydrogen ion concentration is 1 x 10-5M.
What is the pH?
Answer:
pH=5
Explanation:
-log(1 x 10-5)=5
You start with a container that is 8L big and the temperature in the room is 326K.
If the you take the container out in the heat at 352K, how big will it get?
Answer:
The new volume is 8.64 L.
Explanation:
Charles's Law consists of the relationship that exists between the volume and the temperature of a certain quantity of ideal gas, which is maintained at a constant pressure. For a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases.
In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:
[tex]\frac{V}{T} =k[/tex]
Being an initial state 1 that modifies its conditions until a final state 2, it is fulfilled:
[tex]\frac{V1}{T1} =\frac{V2}{T2}[/tex]
In this case:
V1= 8 LT1= 326 KV2= ?T2= 352 KReplacing:
[tex]\frac{8L}{326 K} =\frac{V2}{352 K}[/tex]
Solving:
[tex]V2=352 K*\frac{8L}{326 K}[/tex]
V2= 8.64 L
The new volume is 8.64 L.
You use a _____ when you are changing compounds
Answer:
coeffeicent!
Explanation:
this balances equations and also changes the amount of a compound/element present
(science)Which type of harmful alleles may disappear from a population more slowly when the individual may still reproduce?
a.a dominant allele
b.a recensive allele
c.a double allele
d.a single allele
El etanol combustiona con el oxigeno produciendo dióxido de carbono gaseoso y agua: En un proceso se hacen reaccionar 450.2 g de dioxígeno con 998. 2 g de etanol . a) ¿Cuál de los reactivos es el limitante? b) Calcule la masa de dióxido de carbono que se formará c) ¿ Cuanto del reactivo en exceso quedará sin reaccionar?
Answer:
uh oh stinky uh oh stinky
a tiny particle in the nucleus of an atom that is about the same size as a proton is a(n)
A. electron
B. neutron
C. solid
D. element
Answer:
b. neutron.
Explanation:
I hope this helps.
Answer:
B. Neutron
Explanation:
Neutrons are about the same size as protons. In addition, nuclei are made up of neutrons and protons. Electrons are located in the electron cloud, which is outside of the nucleus. Solids are hard matter, and an element is a substance that cannot be broken down any further.
Hope this helps!
Choose the correct name for NH3 according to the naming system being used. What is the IUPAC name for NH3? ammonia mononitrogen hydride mononitrogen trihydride nitrogen trihydride
Answer:
Nitrogen Trihydride
Explanation:
Ammonia is the common name of NH3. However, with this naming system, you should name it as a non-metal. Nitrogen trihydride.
Answer:
Nitrogen Trihydride
Explanation:
Given : 4.50 molte
How many moles of ammonia would you get if 4.50 moles of hydrogen gas
reacted
Colin decided to investigate soil erosion by water. He measured rates of erosion on
model hills made of soil, rock, and sand. Which of the following was the test
(independent) variable?
Answer:
i just had a test on this with 2 attempts and got it wrong on both but i do know that the answer is not...
the steepness of the models hillside
or
the rate of erosion on the hills
so the answer is either...
the amount of water sprayed on the hills
or
the type of material used to construct the model hills
but i think its the amount of water sprayed on the hills...i hope i helped a lil ;)
Explanation: