From the question;
1) The mass if 50.6 g
2) The mass is 3.8 g
3) The mass is 926.1 g
3b) The mass is 712.9 g
4) The volume is 127.7 L
What is the mole?We know that;
Number of moles = concentration * volume
Number of moles = mass/ molar mass
mass = concentration * volume * molar mass
Question 1
0.819M * 0.210 L * 294 g/mol
= 50.6 g
Question 2
0.046 M * 0.525 L * 158 g/mol
= 3.8 g
Question 3
Number of moles = 448 g/92 g/mol
= 4.9 moles
If 1 mole of toluene reacts with 3 moles of nitric acid
4.9 moles of toluene reacts with 4.9 * 3/1
= 14.7 moles
Mass of the nitric acid = 14.7 moles * 63 g/mol
= 926.1 g
Part B
Number of moles of toluene = 289 g/92 g/mol
= 3.14 moles
If 1 mole of toluene produces 1 moles of nitric acid
Moles of TNT produced = 3.14 mol * 227 g/mol
= 712.9 g
If 1 mole of hydrogen sulfide occupies 22.4 L
x moles of hydrogen sulfide occupies 127 L
x = 5.7 moles
2 moles of hydrogen sulfide produces 2 moles of sulfur dioxide
Moles of sulfur dioxide produced = 5.7 moles
Volume of sulfur dioxide produced = 5.7 moles * 22.4 L/1 mol
= 127.7 L
Learn more about moles:https://brainly.com/question/15209553
#SPJ4
A compound consisting of carbon and hydrogen consists of 67.90%
carbon by mass. If the compound is measure to have a mass of 37.897
Mg, how many grams of hydrogen are present in the compound?
Given that the compound consists of 67.90% carbon by mass and has a total mass of 37.897 Mg, we can calculate the mass of hydrogen in the compound.
Let's assume the mass percentage of hydrogen in the compound is denoted by "y." According to the law of constant composition, the sum of the mass percentages of carbon and hydrogen is equal to 100.
Mass% of Carbon + Mass% of Hydrogen = 100
Since the mass percentage of carbon is 67.90%, we can calculate the mass percentage of hydrogen as follows:
Mass% of Hydrogen = 100 - 67.9
Mass% of Hydrogen = 32.1
Therefore, the compound contains 32.1% of hydrogen by mass.
Next, we can calculate the mass of hydrogen present in the compound using the following formula:
Mass of hydrogen = Percentage of hydrogen x Total mass of the compound / 100
Substituting the given values, we find:
Mass of hydrogen = 32.1 x 37.897 Mg / 100
Now, we need to convert the mass from megagrams (Mg) to grams:
Mass of hydrogen = 32.1 x 37.897 Mg x 10^6 g / 100
Calculating this expression, we find:
Mass of hydrogen = 12.159 grams
There are 12.159 grams of hydrogen present in the compound.
To know more about hydrogen visit:
https://brainly.com/question/30623765
#SPJ11
For C18 stationary phase, which mobile phase is expected to give the longest elution time ? * [ acetonitrile acetonitrile 20% - Water 80% acetonitrile 80% - Water 20% acetonitrile 50% - Water 50% 17. Which of the following methods can be used to overcome detector fluctuations? * [ד] spiking degassing standard addition method internal standard method
Higher polarity mobile phase (e.g., acetonitrile 80% - water 20%) leads to longer elution times on C18 stationary phase due to stronger interaction. Internal standard method compensates detector fluctuations by adding a known compound to the sample, improving result accuracy.
For a C18 stationary phase, a mobile phase with higher polarity, such as acetonitrile 80% - water 20%, is expected to give the longest elution time. This is because a more polar mobile phase interacts more strongly with the hydrophobic stationary phase, leading to slower elution of analytes.
As for question 17, the method that can be used to overcome detector fluctuations is the internal standard method. In this method, a known compound (the internal standard) is added to the sample before analysis.
The internal standard is a compound that is not expected to be present in the sample but is similar in chemical properties to the analyte.
By measuring the response of the analyte relative to the internal standard, detector fluctuations can be compensated for, providing more accurate and reliable results.
To know more about stationary phase refer here :
https://brainly.com/question/10104232#
#SPJ11
Triangle 1 has vertices at (e,f), (g,h), and (j,k). Triangle 2 has vertices at (e+2,f+5), (g+2,h+5), and (j+2,k+5). What can you conclude about triangle 2?.
Triangle 1 and Triangle 2 are congruent triangles.
Triangle 2 is obtained by translating Triangle 1 two units to the right and five units upwards.
When we translate a figure, we move it to a new position while keeping the shape and size of the figure the same. In this case, Triangle 2 has the same shape and size as Triangle 1, but it has been moved two units to the right and five units upwards.
To understand this concept better, let's consider an example.
Suppose Triangle 1 has vertices at (1, 2), (3, 4), and (5, 6). To obtain Triangle 2, we add 2 to the x-coordinates and 5 to the y-coordinates of each vertex. So, the vertices of Triangle 2 would be (1+2, 2+5), (3+2, 4+5), and (5+2, 6+5), which simplifies to (3, 7), (5, 9), and (7, 11).
Therefore, Triangle 2 has vertices at (3, 7), (5, 9), and (7, 11).
In general, when we translate a triangle, all the corresponding sides and angles remain the same. So, Triangle 1 and Triangle 2 are congruent triangles.
Learn more about Congruent Triangles here:
https://brainly.com/question/30097377
#SPJ11
For the following reaction. 6.02 grams of silver nitrate are mixed with excess iron (II) chloride. The reaction yields 2.16 grams of iron (II) nitrate iron (II) chloride (aq) + silver nitrate (aq) –»iron (II) nitrate (aq) + silver chloride (s) grams What is the theoretical yield of iron (II) nitrate ?
The theoretical yield of iron (II) nitrate is 0.795 grams.
The theoretical yield of iron (II) nitrate can be calculated using stoichiometry.
First, we need to determine the balanced chemical equation for the reaction:
FeCl₂ (aq) + 2AgNO₃ (aq) → Fe(NO₃)₂ (aq) + 2AgCl (s)
According to the equation, 1 mole of FeCl₂ reacts with 2 moles of AgNO₃ to produce 1 mole of Fe(NO₃)₂ and 2 moles of AgCl.
To find the theoretical yield of Fe(NO₃)₂, we can use the given mass of silver nitrate (2.16 grams) and convert it to moles.
The molar mass of AgNO₃ is 169.87 g/mol (107.87 g/mol for Ag + 14.01 g/mol for N + 3(16.00 g/mol) for 3 O atoms).
Using the formula: moles = mass / molar mass, we can calculate the moles of AgNO₃:
moles of AgNO₃ = 2.16 g / 169.87 g/mol ≈ 0.0127 mol
Since the stoichiometry of the reaction shows that the molar ratio between AgNO₃ and Fe(NO₃)₂ is 2:1, we can determine the moles of Fe(NO₃)₂:
moles of Fe(NO₃)₂ = 0.0127 mol / 2 ≈ 0.00635 mol
Finally, to find the theoretical yield of Fe(NO₃)₂ in grams, we can multiply the moles of Fe(NO₃)₂ by its molar mass:
theoretical yield of Fe(NO₃)₂ = 0.00635 mol * (55.85 g/mol + 2(14.01 g/mol) + 6(16.00 g/mol)) ≈ 0.795 g
Therefore, the theoretical yield is approximately 0.795 grams.
Learn more about theoretical yield here: https://brainly.com/question/25996347
#SPJ11
Which is an example of a reduction?.
An example of a reduction is the conversion of iron(III) oxide (Fe₂O₃) to iron metal (Fe) by the addition of hydrogen gas (H₂).
The reaction can be represented as follows:
Fe₂O₃ + 3H₂ → 2Fe + 3H₂O
In this reaction, iron(III) oxide is reduced to iron metal, and hydrogen gas is oxidized to water. Reduction involves the gain of electrons or a decrease in the oxidation state of an atom or molecule. In this case, the iron(III) ions in Fe₂O₃ gain electrons and undergo a reduction process, resulting in the formation of elemental iron.
Hence, the example of reduction is stated above.
Learn more about reduction here:
https://brainly.com/question/33512011
#SPJ 4
identify whether the bonding in a compound formed between the following pairs of elements would be primarily ionic or covalent iron and oxygen lead and flourine
The bonding between iron and oxygen is primarily ionic, while the bonding between lead and fluorine is primarily covalent.
Ionic bonding occurs between elements with a large difference in electronegativity. In the case of iron and oxygen, iron has a lower electronegativity (1.83) compared to oxygen (3.44). This significant difference in electronegativity indicates that oxygen has a greater tendency to attract electrons towards itself, resulting in the transfer of electrons from iron to oxygen.
This transfer creates positively charged iron ions (Fe2+) and negatively charged oxygen ions (O2-). The electrostatic attraction between these oppositely charged ions forms the ionic bond.
On the other hand, covalent bonding occurs between elements with similar electronegativities, where electrons are shared between atoms. Lead and fluorine have electronegativities of 2.33 and 3.98, respectively. Although there is still a difference in electronegativity, it is not as large as in the case of iron and oxygen.
This smaller difference suggests that the electrons in the bond between lead and fluorine are shared more equally, rather than being completely transferred. The shared electrons create a covalent bond between the lead and fluorine atoms.
Learn more about Ionic and covalent bonding
brainly.com/question/12663276
#SPJ11
The density of titanium is 4.51g/cm^3. What is the volume (in
cubic inches) of 3.5lb of Titanium? this could be helpful D=M/V
The volume of 3.5 lb of titanium is 21.47 in³.
The density of titanium is 4.51 g/cm³.The weight of titanium is 3.5 lb.
Formula used:
Density, D = M/V, where D is density, M is mass, and V is volume.
The conversion factor of 1 inch³ = 16.39 cm³.1 lb = 453.592 g.
First, we will calculate the mass of titanium.
3.5 lb = 3.5 × 453.592 g
= 1587.772 g
Next, we will calculate the volume of titanium.
Volume of titanium = Mass of titanium / Density of titanium
= 1587.772 g / 4.51 g/cm³
= 352.044 cm³
Next, we will convert the volume from cm³ to in³.
1 inch³ = 16.39 cm³.
Volume of titanium in in³ = Volume of titanium / 16.39
= 352.044 cm³ / 16.39
= 21.47 in³
To know more about the titanium, visit:
https://brainly.com/question/8028003
#SPJ11
which of the following statements is (are) true for the compound (3r, 4r)-3,4-dimethylhexane?
Thus, the correct option is A: Both statements I and II are true.
(3R, 4R)-3,4-dimethylhexane is an alkane, that has two chiral centers and is an example of stereoisomers. The compound (3R, 4R)-3,4-dimethylhexane belongs to the group of hydrocarbons and it is an alkane. An alkane is a saturated hydrocarbon that consists of only single bonds.
The general formula for an alkane is CnH2n+2,
where n is the number of carbon atoms. Alkanes are known to be unreactive in general, and as a result, they are often called paraffins.
There are two chiral centers present in (3R, 4R)-3,4-dimethylhexane, which means that the molecule is a stereoisomer. Stereoisomers are molecules that are comprised of the same atoms connected in the same order but have different spatial arrangements.
Stereoisomers are also known as diastereomers or enantiomers.
In the compound (3R, 4R)-3,4-dimethylhexane:1. The carbon at position 3 (C3) has an R configuration.2. The carbon at position 4 (C4) has an R configuration.
to know more about isomers visit:
https://brainly.com/question/32508297
#SPJ11
Describe the different allotropes of carbon. Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help graphite In dispersion forces , carbon atoms are arranged in sheets. Within each sheet, the atoms are covalently bonded to one another by a network of sigma and pi bonds. Neighboring sheets are held together by Ionic bonds nanotubes In hydrogen bonds each carbon atom forma tour to four other carbon atoms in a tetrahedral geometry are long carbon structures, which consist of sheets of interconnected Cs rings that assume the shape of a cylinder (ike a roll of chicken wire) fullerenes covalent bonds diamond occur as soccer ball-shaped clusters of 60 carbon atoms (Co) and are black solids similar to graphite-the individual clusters are held to one another by What are the three categories of ceramics? Check all that apply. metallic ceramics hydride ceramics oxide ceramics silicate ceramics nonoxide ceramics borate ceramics nonmetallic ceramics Submit Province Anouare Dani What is the difference between the valence band and the conduction band? Match the words in the left column to the appropriate blanks in the sentence on the right. Reset Help valence band conduction band In band theory, electrons become mobile when they make a transition from the occupied molecular orbital into higher-energy empty molecular orbitals. For this reason, the occupied molecular orbitals are often called the and the unoccupied orbitals are called the highest lowest Review Constantie Consider the face centered cubic structure shown here Part A What is the length of the ine Gabeled e) that runs diagonaly across one of the faces of the cube in terms of the atomic radius? Express your answer in terms of C-4 Prvi An Correct Part Use the answer to Port And The Pythagoratheromo derive expression for the edge engine (t) in terms of Express your answer in terms of ΑΣΦ Submit Previous Answers Request Answer Review ContiPod Table Consider the body cerradbructure shown here Part A ✓ DO PI What is the length of their beled that runs from one comer of the cube diagonalt the center of the cube to the other comer in terms of the wome Express your answer in terms of Screen 020-07- Correct Part Use there there to drive an expression for the longth of the treated and diagonally across one of these be inform the edge 09 Post Express your newer in terms of OVO AL O Sub AM Review Constants Periodic Table Consider the body-centered Cubic structure shown here Part A What is the length of the line labeled c) that runs from one comer of the cube dagonally through the center of the cube to the other comes in terms of the atomic radial Express your answer in terms of ✓ Correct Part Use the moderne noget at ons only one of the focus of the cute in form the edge Express your answer in terms of IVOS - 5.6577 Submit * Incorrect; Try Again: 21 attempt remaining
The different allotropes of carbon are graphite, nanotubes, fullerenes, and diamond.
Describe the structure and properties of graphite.Graphite is an allotrope of carbon where carbon atoms are arranged in sheets, forming a two-dimensional hexagonal lattice.
Within each sheet, carbon atoms are covalently bonded to one another by a network of sigma and pi bonds, resulting in a strong and stable structure.
However, these sheets are held together by weak dispersion forces, allowing them to slide over each other easily. This characteristic gives graphite its slippery and lubricating properties. Graphite is an excellent electrical conductor due to the presence of delocalized electrons within the sheets, allowing electricity to flow through the planes.
Learn more about allotropes
brainly.com/question/13904504
#SPJ11
Name the dependent and independent variables for each
procedure?
What must be included in the title of a graph?
What is a curve in graphs?
The dependent variable is the measured or observed variable, while the independent variable is the manipulated or controlled variable in scientific experiments.
In scientific experiments, the dependent variable is the variable being measured or observed, while the independent variable is the variable being manipulated or controlled.
For each procedure, the dependent and independent variables can vary depending on the specific experiment. Here are some examples:
Procedure 1
Dependent variable: Temperature
Independent variable: Time
Procedure 2
Dependent variable: Height
Independent variable: Amount of fertilizer
Procedure 3
Dependent variable: Reaction rate
Independent variable: Concentration of reactant
In the title of a graph, it is important to include the variables being plotted and the units of measurement.
This helps to clearly describe the content of the graph and provide information to the reader. For example, a title could be "Temperature (°C) vs. Time (min)" or "Height (cm) vs. Amount of Fertilizer (g)."
In graphs, a curve refers to the line or shape created when plotting data points on a graph. It represents the relationship or trend between the independent and dependent variables.
The curve can be smooth or jagged, depending on the nature of the data. The shape of the curve provides insights into the relationship between the variables and helps in analyzing the data.
To know more about dependent variable refer here
https://brainly.com/question/33270051#
#SPJ11
{V}_2 {O}_5
Express your answer using one decimal place and include the appropriate unit.the molar mass =
Vanadium pentoxide is a solid that is commonly used as a catalyst in chemical reactions and is utilized in the production of sulfuric acid, vanadium metal, ceramics, and glass. Its molar mass is 181.88 g/mol, and it is hazardous to both humans and the environment if not handled correctly.
Vanadium (V) pentoxide is a chemical compound that has the chemical formula Vanadium pentoxide . The molar mass of Vanadium pentoxide is 181.88 g/mol. [tex]V_{2} O_{5}[/tex] is a solid that appears as a dark grey or brown powder, and it is insoluble in water. It is frequently employed as a catalyst in chemical reactions.
Vanadium pentoxide, also known as vanadic acid, is used as a reagent in analytical chemistry to detect arsenic, lead, and phosphorus in biological specimens. Vanadium pentoxide is utilized as a catalyst in the production of sulfuric acid and as a raw material for the production of vanadium metal.
Vanadium pentoxide is employed in the manufacturing of ceramics, glass, and other materials. It is also used in the formulation of paint pigments and coatings. Vanadium pentoxide, according to some studies, has anti-inflammatory and anticancer properties.
Vanadium pentoxide can cause respiratory irritation and lung inflammation in humans. It is considered hazardous to the environment, and its disposal should be handled with care.
Know more about Vanadium here:
https://brainly.com/question/25237156
#SPJ11
a piece of magnesium metal gradually forms an outside layer of magnesium oxide when exposed to the air. the class of this reaction is
The class of the reaction between magnesium metal and oxygen in the air, which results in the formation of magnesium oxide, is oxidation.
Oxidation is a chemical reaction that involves the loss of electrons or an increase in oxidation state. In this case, magnesium metal (Mg) undergoes oxidation as it reacts with oxygen (O_2) in the air. The magnesium atoms lose electrons, transferring them to the oxygen atoms, resulting in the formation of magnesium oxide (MgO).
Magnesium metal is highly reactive and readily oxidizes in the presence of oxygen. The outer layer of magnesium metal reacts with oxygen molecules to form magnesium oxide. This process occurs gradually over time as magnesium atoms on the surface of the metal react with oxygen.
The formation of magnesium oxide is a classic example of an oxidation reaction, where magnesium undergoes oxidation by losing electrons, and oxygen undergoes reduction by gaining electrons. This type of reaction is commonly observed in the corrosion of metals when they are exposed to air or other oxidizing agents.
Learn more about oxidation from this link:
https://brainly.com/question/13182308
#SPJ11