Answer:
M = 1.4 M
Explanation:
Hello there!
In this case, according to the given information, it will be possible for us to calculate the required molarity according to its definition:
[tex]M=\frac{n}{V}[/tex]
Whereas the n is mole and has a value of 0.7 mol, V the volume in liters, which is 0.5 L; therefore, the result is:
[tex]M=\frac{0.7mol}{0.5L} \\\\M=1.4 M[/tex]
Regards!
What is the percent by mass of magnesium in a 1000 g sample of ocean water (solution) that has 1.36 g of magnesium ions?
Answer:
So the percentage mass of Magnesium in ocean water is 0.13%.
Explanation:
brainliest pls
conditions under which a reaction can be first order overall
A bimolecular reaction can be kinetically first order in behaviour provided one of the reactants is taken in such a large excess that its concentration may hardly change. Such a reactant will not contribute to the order. Thus, a bimolecular reaction will be of first order. These reactions are known as pseudo chemical reactions.
A sample was then prepared containing 14.00 mL of coffee and 8.00 mL of 4.80 ppm Li , and diluted to a 50.00 mL total volume. The ratio of the internal standard signal to the analyte signal in the unknown sample was found to be 0.840/1.000 (Li signal/Na signal). Determine the unknown concentration of Na in the coffee sample.
Answer:
The right answer is "[tex][Na^+]=5.57 \ ppm[/tex]".
Explanation:
The given values are:
[tex]\frac{A_s}{A_{coffee}} =\frac{0.840}{1.000}[/tex]
According to the question,
The concentration of standard will be:
= [tex]\frac{7.80}{50.00}\times 4.80[/tex]
= [tex]0.156\times 4.80[/tex]
= [tex]0.748 \ ppm[/tex]
Coffee after dilution,
⇒ [tex]\frac{A_{coffee}}{C_{coffee}} =F\times \frac{A_s}{C_s}[/tex]
or,
⇒ [tex]C_{coffee}=\frac{A_{coffee}}{A_s}\times \frac{C_s}{F}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{1.000}{0.840}\times \frac{0.748}{1.68}[/tex]
⇒ [tex]=1.191\times 1.3104[/tex]
⇒ [tex]=1.561 \ ppm[/tex]
hence,
In unknown sample, the concentration of coffee will be:
= [tex]1.561\times \frac{50}{14}[/tex]
= [tex]\frac{78.05}{14}[/tex]
= [tex]5.57 \ ppm[/tex]
What is the volume of an object if the density is 8g/cm^3 and has a mass of 16g? *
1 point
8mL
128mL
16mL
2mL
Answer:
I think the answer is 2mL.
Explanation:
i hope it help.
How many moles of nitrogen are required to produce 13.5 grams of NH3
Answer:
0.794 moles
Explanation:
Gviven that:
TO find the number of moles of nitrogen (N) using the formula:
number of moles = mass /molar mass
where;
the molar mass for NH3 = 14 +( 1 × 3) = 17 g/mol
∴
number of moles of (N) = mass of N/molar mass
= 13.5 g/17 g/mol
number of moles of (N) = 0.794 moles
Calculate the volume of sulfur dioxide produced when 27.9 mL O2 reacts with carbon disulfide.
Answer:
18.6 ml
Explanation:
From the balanced equation given:
Volume of oxygen = 27.9 mL
From the equation, we will see that three moles of oxygen react with CS_2 to give two moles of sulfur dioxide (SO_2)
Also, three mL of O_2 yields two mL of SO_2
Now, to calculate the volume of SO_2; we have:
[tex]=27.9 mL \times \dfrac{2 mL \ of SO_2}{3 mL \ O_2}[/tex]
= 18.6 mL of SO_2
Match the solutions to the descriptions of the freezing points.a. One mole of the ionic compound Na3PO4 dissolved in 1000 g H2O b. One mole of the ionic compound CuSO4 dissolved in 1000 g H2O c. One mole of the nonelectrolyte C6H12O6 dissolved in 1000 g H2O1. Highest freezing point 2. Intermediate freezing point 3. Lowest freezing point
Explanation:
Depression in Freezing point
= Kf × i × m
where m is molality , i is Van't Hoff factor, m = molality
Since molality and Kf remain the same
depression in freezing point is proportional to i
i= 2 for CuSO4 ( CuSO4----------> Cu+2 + SO4-2
i=1 for C2h6O
i= 3 for MgCl2 ( MgCl2--------> Mg+2+ 2Cl-)
So the freezing point depression is highest for MgCl2 and lowest for C2H6O
so freezing point of the solution = freezing point of pure solvent- freezing point depression
since MgCl2 has got highest freezing point depression it will have loweest freezing point and C2H6O will have highest freezing point
Lab 6: Basic Chemistry Thermodynamics: Solve the challenge of storing renewable energy
Answer:
Expensive and low storing capacity.
Explanation:
The storing of renewable energy is a big challenge for us because this renewable energy can't be stored for a long due to expensive and low storing capacity. There are two challenges about the storing of renewable energy is that the battery are very expensive and can store very less amount of energy which makes unable to store the renewable energy. The scientists should make a storing device which is not too much expensive and has more storage capacity.
______ is the process of change from a liquid to a gas at temperatures below the boiling
point.
Answer:
evaporation is the process
Answer:
EvaporationExplanation:
Evaporation is the process of becoming a vapor. The process of extracting moisture as by heat.
Evaporation is the process of change from a liquid to a gas at temperatures below the boiling point.
Therefore, the final answer is evaporation.
Determine the number of moles in 1.5 x 10^25
atoms of iron.
How to solve for K when given your anode and cathode equations and voltage
Answer:
See Explanation
Explanation:
In thermodynamics theory the Free Energy (ΔG) of a chemical system is described by the expression ΔG = ΔG° + RTlnQ. When chemical system is at equilibrium ΔG = 0. Substituting into the system expression gives ...
0 = ΔG° + RTlnKc, which rearranges to ΔG° = - RTlnKc. ΔG° in electrochemical terms gives ΔG° = - nFE°, where n = charge transfer, F = Faraday Constant = 96,500 amp·sec and E° = Standard Reduction Potential of the electrochemical system of interest.
Substituting into the ΔG° expression above gives
-nFE°(cell) = -RTlnKc => E°(cell) = (-RT/-nF)lnKc = (2.303·R·T/n·F)logKc
=> E°(cell) = (0.0592/n)logKc = E°(Reduction) - E°(Oxidation)
Application example:
Calculate the Kc value for a Zinc/Copper electrochemical cell.
Zn° => Zn⁺² + 2e⁻ ; E°(Zn) = -0.76 volt
Cu° => Cu⁺² + 2e⁻ ; E°(Cu) = 0.34 volt
By natural process, charge transfer occurs from the more negative reduction potential to the more positive reduction potential.
That is,
Zn° => Zn⁺² + 2e⁻ (Oxidation Rxn)
Cu⁺² + 2e⁻ => Cu° (Reduction Rxn)
E°(Zn/Cu) = (0.0592/n)logKc
= (0.0592/2)logKc = E°(Cu) - E°(Zn) = 0.34v - (-0.76v) = 1.10v
=> logKc = 2(1.10)/0.0592 = 37.2
=> Kc = 10³⁷°² = 1.45 x 10³⁷
g Which of the following is TRUE for a system that is in dynamic equilibrium? Which of the following is TRUE for a system that is in dynamic equilibrium? The concentration of products is equal to the concentration of the reactants. The forward reaction goes to 100% completion. Both the forward and reverse reactions come to a halt. The reaction rate of the forward reaction approaches zero. none of the above
Answer:
none of the above
Explanation:
A system is said to have attained dynamic equilibrium when the forward and reverse reactions proceed at the same rate. That is;
Rate of forward reaction = Rate of reverse reaction
The implication of this is that the concentrations of reactants and products remain constant when dynamic equilibrium is attained in a system. This does not mean that the reactant and product concentrations become equal; it rather means that their concentrations do not significantly change once dynamic equilibrium has been attained.
What is a solution?
A. The substance that is dissolved in another substance
B. The mixture of one substance dissolved in another
C. The substance that dissolves another substance
D. Two liquids that do not mix with each other
SUR
Answer:
B
Explanation:
this is because solution is the mixture of a solvent and a solute to give you a solution
Answer:
B. The mixture of one substance dissolved in another
Explanation:
Place the following in order of increasing entropy at 298 K.
Ne Xe He Ar Kr
A) He < Kr < Ne < Ar < Xe.
B) Xe < Kr < Ar < Ne < He.
C) Ar < He < Ar < Ne < Kr.
D) Ar < Ne < Xe < Kr < He.
E) He < Ne < Ar < Kr < Xe.
Answer:
E
Explanation:
The simple rule of thumb is that as the atomic or molar mass of an atom increases, the entropy increases. This means that more the mass more will be entropy.
The atomic mass of various elements is as follows
Ne = 20 g/mol
Xe = 131 g/mol
He = 4 g/mol
Ar = 40 g/mol
Kr = 84 g/mol
Therefore, the order of increasing entropy must be
He<Ne<Ar<Kr<Xe.
Hence, option E is the correct answer.
If a balloon has a volume of 1.696 L at a pressure of 2.11 0 atmospheres, what will be the volume of the balloon if the pressure is increased to 5.067 atmospheres?
Answer:
I think that the volume will be 1.414
Explanation:
According to the formula of boyle's law P1 V1 = P2 V2
We have to find V2 so:
V2 = P2/P1 V1
By putting the values:
V2 = 5.06/2.11 * 1.696
V2 = 5.06/3.578
V2 = 1.414
Please give me brainliest, it will mean a lot to me.
When ammonium nitrate dissolves in water, the solution becomes cold.
NH4NO3(s) <-> NH4+(aq) + NO3-(aq)
The reaction is thermodynamically favorable. The signs of ΔG and ΔS for the reaction are which of the following?
A.
B.
C.
D.
B.
Delta G is negative and Delta S is positive.
How many hydrogen atoms can be bonded to one carbon atom?
O A. 3
O B. 1
O C. 2.
O D. 4
Answer:
O D. 4
Explanation:
A carbon atom is an element that can be found in the atomic number 6th of the periodic table. It electronic configuration is 1s² 2s² 2p². It is a tetravalent and non metallic compound. In its outermost structure, Carbon needs four additional valence electrons to complete its octet structure. That is why hydrogen with only one electron can be bonded to one carbon atom in four different places making the carbon element obtain a tetrahedral shape.
What is the percent yield if the actual yield of
NH3 is 70 grams
How many watts do I consume if I eat a 600 Calorie sandwich in 600 seconds
Answer:
1 watt is conduned by you ok
what is a major crack in the earth's surface?
Answer:
A crack in earth's crust is called a fault also known as a "fracture"
If the molar heat of vaporization for water is 40.7 kJ/mol. What is the molar heat of condensation? HELP ME PLEASE!!!
Answer:
not sure hope you have a good day
If the molar heat of vaporization for water is 40.7 kJ/mol. -40.7 kJ/mol is the molar heat of condensation.
What is condensation?Condensation, which is the opposite of vaporization, is the transformation of matter from its gaseous state into its liquid state. The water cycle is the most frequent use of the phrase. Another way to describe it is as the transformation of water vapor into liquid water when it comes into touch with a solid, liquid, or cloud condensation nucleus in the atmosphere.
Deposition is the term for the change that occurs when the gaseous phase directly transitions into the solid phase. Condensation is started when atomic or molecule clusters of such a species form within their gaseous volume, similar to how raindrops or snowflakes form within clouds, or when their gaseous phase comes into contact with a liquid and solid surface.
molar heat of vaporization = 40.7 kJ/mol
molar heat of condensation = -40.7 kJ/mol
Therefore, if the molar heat of vaporization for water is 40.7 kJ/mol. -40.7 kJ/mol is the molar heat of condensation.
To know more about condensation, here:
https://brainly.com/question/5500097
#SPJ7
When a lead acid car battery is recharged by the alternator, it acts essentially as an electrolytic cell in which solid lead(II) sulfate PbSO4 is reduced to lead at the cathode and oxidized to solid lead(II) oxide PbO at the anode. Suppose a current of 17.0A is fed into a car battery for 15.0 seconds. Calculate the mass of lead deposited on the cathode of the battery. Be sure your answer has a unit symbol and the correct number of significant digits.
Answer:
0.273504 grams
Explanation:
Charge Deposited = Current ×Time
q=It
Given: I= 17.0A, t= 15.0 seconds
Q= 17×15= 255 C
Since, 1 mole contains 96500C of charge deposition
Therefore, number of moles = 255/96500 = 0.00264 moles
Moreover, since Pb changes to Pb2+,
Hence number of moles of Pb deposited = 0.00264/2
= 0.00132
Also, Molar mass of Lead = 207.2 gm/mol
Therefore, the mass of lead deposited = 0.00132×207.2 = 0.273504 grams
.
1. What is the difference between a synthetic resource and a Natural Resource? This is technology.and I need help pls help!!!!!!!!!!!!!
Answer:
Natural materials are those that are found in nature and have not been made by humans. By comparison, synthetic materials are man-made and cannot be found in nature. Synthetic products are usually created in laboratories by mixing different chemicals, or prepared compounds and substances made in a laboratory.
Explanation:
Natural materials are those that are found in nature and have not been made by humans. By comparison, synthetic materials are man-made and cannot be found in nature. Synthetic products are usually created in laboratories by mixing different chemicals, or prepared compounds and substances made in a laboratory
True or false: If a nuclear chain reaction is uncontrolled, it produces a lot of energy all at once. This is
what happens in an atomic bomb.
Answer: False, I think...
Explanation:
Answer:
True
Explanation:
It is uncontrolled
A student needs to dilute a 0.25 M Pb(NO3)2 solution to make 73.0 mL of 0.13 M Pb(NO3)2 . Set up the calculation by placing the values with the correct units into the equation. Then, calculate the volume, in milliliters, of the 0.25 M Pb(NO3)2 solution that is needed.
Answer: Volume of 0.25 M solution is 38 ml
Explanation: Amount of substance n remains same.
n = c1V1 = c2V2 Solve V2 = V1c1 / c2 = 73,0 ml · 0.13 M / 0.25 M = 37.96 ml
Which of the following is NOT an indication that a chemical reaction has taken place?
Answer:
WHERE ARE THE CHOICES?
PLEASE MAKE SURE THAT YOUR QUESTION IS RIGHT BEFORE POSTING IT シ︎
Change of state of matter is not an indication that a chemical change has taken place.
What is matter?Matter is a substance which is made up of various types of particles which occupy space and have inertia . All living things and objects are made up of various types of particles that occupy space and have inertia .
Depending on temperature and other factors matter is able to exist in different phases. Most common of which are solid, liquid and gas. Matter can exist in more than one state depending on the temperature and pressure .
State of matter can be changed by heating or cooling and even by changing the applied pressure.When a state changes matter does not break rather its state changes though its chemical composition remains same.
Physical characteristics of matter are shape, color, size and temperature. Every matter is made up of elements which cannot be broken down further by ordinary chemical reactions.
Learn more about matter,here:
https://brainly.com/question/12972782
#SPJ6
the correct order of increasing ionisation energy of Na,Al,Si and Mg elements is?
Removal of an electron from stable, fully filled orbital requires more energy than removal of electron from partially filled orbital. Thus, ionisation enthalpy for Mg is greater than ionisation enthalpy for Al. So, the correct order of first ionization enthalpies is: Na<Mg>Al<Si.
HELP!!!!!! PLEASE!!!
Answer:
C
Explanation:
sorry if im wrong!!
Nitrogen-fixing bacteria convert atmospheric nitrogen into forms of nitrogen that living things can use.
Please select the best answer from the choices provided
•T
•F
Answer:
I know im late but its true
Explanation:
E2020 edge
Answer:
true
Explanation:
2. Acceleration is______
proportional to mass,
Answer:
Inversely
Explanation:
The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.