Answer:
1.73 Molar
Explanation:
The formula is Molarity=moles of solute/liters of solution, which can be written in whatever way you prefer, and examples include: M=N/V or M=mol/L.
M=N/V
M= [tex]\frac{5.63}{3.25}[/tex]
Divide 5.63 by 3.25. When you calculate this, you get 1.73, therefore your answer is 1.73 molar.
The following dot plot represents the litter sizes of a random sample of labrador retrievers.
Calculate the mean, median, and mode for this set of data.
Calculate the range, interquartile range, and mean absolute deviation (rounded to the nearest hundredth) for this set of data. For the mean absolute deviation, do not round the mean.
Make two inferences about the litter size of labrador retrievers.
Answer:
12
Explanation:so the mean deviation is for the square and the square is for you so you keep the square and add it.
Answer:
1. mean: 7.78 median: 8 mode: 7
2. range: 9 interquartile range: 2 MAD: 4.5367
3. The range is about 4 times bigger than the interquartile range. The mean is around double the MAD.
Explanation:
balance the following equation FeC²+Cl². FeCl³
Answer:
this equation is not proper see that where is the reactant.
Explanation:
give give a proper question and I will
if fecl2 + c2 gives a fecl3 where does the carbon compound go
Answer:
2FeCl2 + Cl2 → 2FeCl3
Explanation:
Compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07% Write the molecular formula of X .
Answer: N2F4
Explanation:(NF2)x2 = N2F2
The compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07%, then the molecular formula of X is N2F4.
What is molecular formula?Molecular formula is defined as a chemical formula that give the total number of atoms of each elements in each molecule of a substance.
It can also be defined as a phrase that specifies the number of atoms of each element in a complex molecule.
It represents the actual number of each atom in a molecules.
It tells us which atoms and how many of each types of atoms are present in a molecule.
NF2 x 2 = N2F4
Thus, the compound X has a molar mass of 104.01·gmol−1 and the following composition: element mass % nitrogen 26.93% fluorine 73.07%, then the molecular formula of X is N2F4.
To learn more about molecular formula, refer to the link below:
https://brainly.com/question/28647690
#SPJ2
Select the correct answer.
Copper carbonate (CuCO3) reacts with hydrochloric acid (HCl) according to this equation:
CuCO3(s) + 2HCl(aq) → CuCl2(aq) + H2O(l) + CO2(g).
Which statement correctly describes the substances in this reaction?
A.
Exactly one product and two reactants are either liquid or dissolved in water.
B.
Exactly one of the reactants is in a water-based solution, but none of the products are.
C.
The reactants include both a liquid and a gas.
D.
Exactly one reactant is a solid, and exactly one product is a gas.
E.
The products include a solid, a liquid, and a gas.
Answer:
I think the answer would be option d.
hope it helps.
when combined the two substances together in the cup, the product can be described as a ____ or ____ (there are two possible answers . you just need to choose one )
1. white gas
2. white liquid
3. white solid
HCO3− + H2S → H2CO3 + HS−
In the reaction above, what is the Bronsted-Lowry acid?
Answer:
H₂S is the proton donor => Bronsted Acid
Explanation:
2 Write a word equation and
a symbol equation for the
reaction of solid zinc oxide
(ZnO) with sulfuric acid.
Answer:
Zinc oxide is react with sulphuric acid to give zinc sulphate and water.
zinc oxide +sulphuric acid ⇒ zinc sulphate + water
Zno +H2So4 ⇒ZnSo4 + H2O
SULPHURIC ACID = H2SO4
ZINC SULPHATE =ZnO
Explanation:
Riddle
Why did the rock collector like his
collection of metamorphic rocks so much?
Answer:
Because they would keep changing? Or Because they were the hottest?
What is the most common oxidation number for group 3 on the periodic table?
Answer:
español
Un elemento del grupo 3 es un elemento situado dentro de la tabla periódica en el grupo 3. Los átomos de estos elementos tienen gran tendencia a oxidarse y son muy reactivos, predominando el estado de oxidación +3. Presentan propiedades muy similares al aluminio. Dan lugar a iones incoloros.
ingles
An element of group 3 is an element located within the periodic table in group 3. The atoms of these elements have a great tendency to oxidize and are very reactive, with the +3 oxidation state predominant. They have properties very similar to aluminum. They give rise to colorless ions.
Explanation:
ingles
Group -> 3
Group -> 3Period
Group -> 3Period4 21
Group -> 3Period4 21Sc
Group -> 3Period4 21Sc5 39
Group -> 3Period4 21Sc5 39Y
Group -> 3Period4 21Sc5 39Y6 57
Group -> 3Period4 21Sc5 39Y6 57The
Group -> 3Period4 21Sc5 39Y6 57The7 89
Group -> 3Period4 21Sc5 39Y6 57The7 89Ac
español
Grupo -> 3
Grupo -> 3Periodo
Grupo -> 3Periodo4 21
Grupo -> 3Periodo4 21Sc
Grupo -> 3Periodo4 21Sc5 39
Grupo -> 3Periodo4 21Sc5 39Y
Grupo -> 3Periodo4 21Sc5 39Y6 57
Grupo -> 3Periodo4 21Sc5 39Y6 57La
Grupo -> 3Periodo4 21Sc5 39Y6 57La7 89
Grupo -> 3Periodo4 21Sc5 39Y6 57La7 89Ac
Molar Concentration of H2O+ lons
in Four Solutions
Solution Molar Concentration
of H3O+ lon
(M)
A 0.1
B 0.01
с 0.001
D I’m 0.0001
Which solution has the highest pH?
Answer:
d
Explanation:
because it’s moving the most spots to the left
The acidity or alkalinity of a solution depends upon its hydronium ion concentration and hydroxide ion concentration. Here among the given solutions, the solution D has the highest pH. The correct option is D.
What is pH?The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre. The pH scale is introduced by the scientist Sorensen. It is more easy to express the concentration of H₃O⁺ using this method.
The equation used to calculate the pH of the solution is given as:
pH = -log[H₃O⁺]
For 0.1 M
pH = -log[0.1] = 1
For 0.01 M
pH = -log[0.01] = 2
For 0.001 M
pH = -log[0.001] = 3
For 0.0001 M
pH = -log[0.0001] = 4
So solution D has the highest pH which is 4.
Thus the correct option is D.
To know more about pH, visit;
https://brainly.com/question/27945512
#SPJ2
2Na(s) + Cl2(g) → 2NaCl(s)
Which of the following choices shows the correct Lewis electron-dot diagram for a molecule of chlorine, Cl2?
Answer: 2!
Explanation:
The best lewis structure for [tex]Cl_2[/tex] is in option 2.
Na or sodium is the cation in the reactant.
Cl or chlorine is the anion in the reactant side.
NaCl is the product of the reaction.
Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule. Electrons are shown as "dots" or for bonding electrons as a line between the two atoms.
Chlorine is a group VIIA element in the periodic table and contains seven electrons in its last shell.
Valence electrons are given by chlorine atoms = [tex]7\times2=14[/tex]
Total valence electrons = 14
So, each of Cl is surrounded by three pairs of dots, connected by a single line. So, the best lewis structure for [tex]Cl_2[/tex] is in option 2.
To know more about:-
brainly.com/question/20300458
A mole of carbon has the same number of atoms as a mole of beryllium.
O True
False
Answer:
False.
Explanation:
Carbon = 12
Beryllium = 9
good luck, i hope this helps :)
Changes in thermal energy provide evidence that a chemical reaction
has occurred. Which of the following BEST describes a chemical reaction
in which energy is released?
Select one:
Exothermic reaction.
Reversible reaction
Physical reaction
Endothermic reaction.
Answer:
Exothermic reaction
Explanation:
Exothermic reaction is a reaction in which energy is evolved from the reaction to the surroundings
5. What is the charge on a single proton?
Answer:
it may be +1 or -1 hope this help
An atom is a kind of stuff that cannot be further decomposed chemically. Therefore, the charge on a single proton is +1.
What is atom?
The building block of an element is an atom. An atom is a kind of stuff that cannot be further decomposed chemically. The three main components of an atom are protons, neutrons, plus electrons.
Some substances are either bigger or smaller than atoms. Instances of chemical species that aren't commonly regarded as atoms include protons, neutrons, and electrons, which are atom-related particles. Atoms make up molecules and compounds, however they are not actual atoms. Salt is an example of a molecule and a compound (NaCl). The charge on a single proton is +1.
Therefore, the charge on a single proton is +1.
To learn more about atom, here:
https://brainly.com/question/29712157
#SPJ6
the atoms in the same period on the periodic table all have what ?
A - The same abbreviation
B - The same number of electron shells
C - the same number of electrons
D - the same number of electrons on the outer energy level
Answer:
B.
Explanation:
A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells. Each next element in a period has one more proton and is less metallic than its predecessor.
Which of the following diagrams represents a single
replacement reaction?
Explanation:
i think the answer is....b
The diagram that represents single replacement reaction is:
b.
Single replacement reaction:This reaction is also known as displacement reaction. It is a reaction in which one element is substituted for another element in a compound. When a replacement reaction occurs, a new aqueous compound and a different pure element will be generated as products. For example:
[tex]2HCl(aq)+Zn(s)--->ZnCl_2(aq)+H_2(g)[/tex]
Thus, option b is correct.
Find more information about displacement reaction here:
brainly.com/question/20690229
Can you divide equation II by another factor and still have it be correct? Why or why not?
Answer:
No. You can not simplify a coefficient of.
Explanation:
:)
what's the difference between viscosity and flow rate
Answer:
Flow rate is how fast a fluid moves. The flow rate can depend on several factors. These factors are the type of fluid that you are using, the force that is pushing on a fluid, the size of the pipe the fluid flows from and the type of surface the fluid flows over. Viscosity is the resistance of a fluid to flow.
Explanation:
just looked it up
the more massive an object is, the more
Answer:
it have more more mass, gravitational potential energy
Explanation:
How much does a 130 kg object weigh on Earth?
A 130 kg object weighs approximately, 1274 Newtons on Earth.
The weight of an object on Earth can be calculated using the formula:
Weight = mass × acceleration due to gravity
Weight is calculated by multiplying the mass of an object by the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 meters per second squared (9.8 m/s²).
In this case, we have a 130 kg object. To find its weight on Earth, we can use the formula:
Weight = mass × acceleration due to gravity
Weight = 130 kg × 9.8 m/s²
Weight = 1274 Newtons (N)
So, the weight of a 130 kg object on Earth is approximately 1274 Newtons.
Therefore, a 130 kg object weighs approximately, 1274 Newtons on Earth.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ 4
Look at the periodic table below. Which of the following lists of elements forms a group on the periodic table?
periodic table
Group of answer choices
Sc, Ti, V, C
Answer:
I'm not totally sure but I think that it is C-carbon
Explanation:
because its in the area of +1+2+3 4 -3 -2 -1
Which of the following is the ground state electrons configuration of the F ion
Answer:
That leaves us with: 1s2 2s2 2p6 And that is the electron configuration for F- , the Fluoride ion.
Explanation:
plz give brainliest
What is the temperature in kelvin of a gas if it is allowed to expand from 1.50 L to 4.50 L? The initial temperature is 10.0°C and pressure is constant throughout the change.
Which equation should you use?
StartFraction V subscript 1 over T subscript 1 EndFraction equals StartFraction V subscript 2 over T subscript 2 EndFraction.
T subscript 2 equals StartFraction V subscript 1 over V subscript 2 EndFraction T subscript 1.
T subscript 2 equals StartFraction V subscript 2 over V subscript 1 EndFraction T subscript 1.
Answer:
first question is the third option and the second question is 849K.
Explanation:
Answer:
third option
849K
Explanation:
For each of the following ionic bonding examples, show the transfer of electrons, the ions resulting with the charges and the final chemical formula of the compund.
Ba and O,
Al and O,
Mg and P,
Na and O,
Ca and Cl
Answer:
BaO
Ba gives up two electrons and becomes Ba⁺²O takes two electron and becomes O⁻²Al₂O₃
Mg₃P₂
Na₂O
CaCl₂
2. Each type of atom is called an element. Which part of the atom give the
atoms its Identity?
The smallest particle of an element which is indivisible and takes part is chemical reaction as a whole without division is called an atom.
the three fundamental particles that identify the atoms are protons, neutrons and electrons.
15) When dilute sulfuric acid is added to zinc metal the products of the reaction are
A zinc oxide + water + hydrogen
B zinc oxide + hydrogen
C zinc sulfate + water + hydrogen
D zinc sulfate + hydrogen
Help plz pozlzlzksj help
Answer:
increase moles of gas inside
Explanation:
Answer:
Its ( C )- Decrease the temperature of the gas inside the basketball
Explanation:
To make sure the balloon doesn't inflate so much it bursts you should NOT completely inflate the balloons when you know the temperature will increase!
How much heat does it take to move 45 g of ice at -25°C to water at 31°C?
the particle that move around the nucleus is are
Answer:
electrons
The nucleus contains two types of subatomic particles, protons and neutrons. The protons have a positive electrical charge and the neutrons have no electrical charge. A third type of subatomic particle, electrons, move around the nucleus. The electrons have a negative electrical charge
Explanation:
HOPE ITS HELPFUL FOR U IF YES PLZ MARK ME AS BRILLIANT
what is condensation transfer of energy?
Answer:
Condensation happens when molecules in a gas cool down. As the molecules lose heat, they lose energy and slow down. They move closer to other gas molecules. Finally these molecules collect together to form a liquid.
Hopefully this helped :)