Answer:
The correct option is;
B. -112 kJ
Explanation:
The parameters given are;
N (g) + O₂ (g) → NO (g) ΔH = 90 kJ/mol
N (g) + O₂ (g) → NO₂ (g) ΔH = 34 kJ/mol
The required chemical reaction is given as follows;
2NO (g) + O₂ (g) → 2NO₂ (g)
Therefore, the heat of formation of 2 moles of NO = 2 × 90 = 180 kJ
The heat of formation of 2 moles of NO₂ = 2 × 34 = 68 kJ
Hence, given that the heat of formation of O₂ at room temperature = 0 kJ/mol, we have;
Change in enthalpy of the chemical reaction = Heat of formation of the products - Heat of formation of the reactants
Change in enthalpy of the chemical reaction = 68 kJ - 180 kJ = -112 kJ
Change in enthalpy of the chemical reaction = -112 kJ.
Answer:
-112
Explanation:
got it right on test
Which animal group actually saw a drop in the number of endangered and threatened species between 1995 and 2005?
a Fish
b. Reptiles
c. Birds
d. Mammals
Answer:
Mammals
Explanation:
9. Let's say, you need to make 2.00 L of 0.05 M copper (II) nitrate solution. How many grams of
copper (II) nitrate will you require?
Answer:
18.76 g of copper II nitrate
Explanation:
Now recall that we must use the formula;
n= CV
Where;
n= number of moles of copper II nitrate solid
C= concentration of copper II nitrate solution
V= volume of copper II nitrate solution
Note that;
n= m/M
Where;
m= mass of solid copper II nitrate
M= molar mass of copper II nitrate
Thus;
m/M= CV
C= 0.05 M
V= 2.00 L
M= 187.56 g/mol
m= the unknown
Substituting values;
m/ 187.56 g/mol = 0.05 M × 2.00 L
m= 0.05 M × 2.00 L × 187.56 g/mol
m= 18.76 g of copper II nitrate
Therefore, 18.76 g of copper II nitrate is required to make 0.05 M solution of copper II nitrate in 2.00 L volume.
1. What is the name for AuCl3?
A)Gold chloride
B)Gold (III) chloride
C)Gold (I) chloride
D)Gold chloride (III)
Answer:
Gold(III) chloride
Explanation:
Elastic energy is stored when an object is stretched. Is this an example
of potential or kinetic energy?
A. Neither
B. Both
d
C. Kinetic
O
D. Potential
Reset Selection
Answer:
D: potential
Explanation:
What kind of solution would have a Ky value that is much less than 12
A. A strongly basic solution
B. A weakly acidic solution
C. A strongly acidic solution
D. A weakly basic solution
Answer:
The answer is option D.
A weakly basic solution
Hope this helps.
Answer:
Explanation: Apex a weakly acidic solution
Which of the following inter-particle forces has the lowest potential energy?
A. ion-ion interaction
b. hydrogen bonding
c. dipole-dipole interaction
d. ion-dipole moment
Answer:
b. hydrogen bonding.
Explanation:
Hope it helps.
41. Which pair of compounds could combine to produce an ester?
I. CH3- CH2 - CH2 - CH3
II. CH3- CH2 - CH2-CH2-OH
III. CH3- CH2 - CH2-COOH
IV. CH3- CH2- CH2- COH
a. I and II
b. II and III
c. II and IV
d. III and IV
Answer: b. ii and iii
Explanation:
The ester, Butyl Butanoate is formed when Butanol reacts with Butanoic acid
as seen below;
CH3-CH2-CH2-CH2-OH + CH3-CH2-CH2-COOH ---->
Butanol Butanoic acid
CH3-CH2-CH2-COOCH2-CH2-CH2-CH3 + H2O
Butyl Butanoate Water
Once an action plan is in place, it should not be changed.
Please select the best answer from the choices provided.
ОТ
OF
Answer:
F = False
Explanation:
An action plan is a plan that an individual or a firm creates, that contains their objectives, aims, strategies , which they require to achieve their specific goals.
An action plan is very detailed, streamlined and straight to the point. It contains a series or a number of steps or tasks that an individual must embark on in other to achieve their end goal.
WHEN AN ACTION PLAN AS BEEN PUT IN PLACE OR SET IN MOTION, IT CAN BE CHANGED OR ALTERED. This is because the aim of a action plan is to achieve the end goal of an individual or a firm. As long as the changes made in the action plan does not hinder the achievement of those goals then the action plan can be changed.
Some of the very common reasons why action plans are changed or modified includes:
a) To make the action plan more flexible.
b) To track and monitor your progress in achieving your end goal. If there is a delay, you can easily track it out on your action plan and modify it.
In other to create an action plan, it is very important that the goals of such that individual or firm is very well defined and clear from the beginning. Action plans must always be monitored, and updated regularly.
Answer:
F, false
Explanation:
i took the quiz on edge
Which of the following is a strong acid?
A. HF (Hydrofluoric acid)
B. NH3 (Ammonia)
C. NaOH (Sodium hydroxide)
D. HCI (Hydrochloric acid)
Answer:
D. HCI (Hydrochloric acid)
Explanation:
correct me if im wrong but im pretty sure thats the answer
39. Which of the following substances are insoluble in water? Select all that apply.
A)Li2CO3
B)BaSO4
C)Mg3(PO4)2
D)КОН
Answer:
B) BaSO₄ and C) Mg₃(PO₄)₂
Explanation:
We can use the solubility rules to decide which substances are insoluble.
You have probably learned NAG SAG and "Cats Cradle Old People," Sally Said.
I've listed them below.
[tex]\begin{array}{lll}\textbf{Soluble} & \textbf{Insoluble}\\\textbf{N}\text{itrates} &\textbf{C} \text{arbonates }\\ \textbf{A}\text{cetates} & \textbf{C}\text{hromates}\\ \textbf{G}\text{roup 1} & \textbf{O}\text{ hydrOxides}\\ & \textbf{P} \text{hosphates}\\\textbf{S}\text{ulfates} &\textbf{S} \text{ulfites}\\ \textbf{A}\text{mmonium}& \textbf{S}\text{ulfides}\\\textbf{G}\text{roup 17} & \\\end{array}[/tex]
These aids help you remember that:
The salts of Group 1 metals are soluble (Li₂CO₃ and KOH).
Sulfates are usually soluble, except for BaSO₄. Thus, BaSO₄ is insoluble.
Phosphates are insoluble — Mg₃(PO₄)₂
The two insoluble compounds are BaSO₄ and Mg₃(PO₄)₂.
Use the chemical equation to find the answers. BaSO4 + H2SO4 → Ba(HSO4)2 Identify how many oxygen atoms are in the product. Identify how many oxygen atoms are in the reactant.
Answer:
Since the equation is balanced, So it have same number of oxygen in the reactants and well as product.
Oxygen in product = 8
Oxygen in reactant = 8
Answer:
Explanation:
i got prove thoooooo
5. Which type of substances do you separate into lons when writing the complete lonic equation?
Answer:
As a general rule, soluble ionic compounds, strong acids, and strong bases should be written as dissociated ions in the complete ionic equation. Insoluble salts and weak acids are written using the neutral molecular formula since they only dissociate to a very small extent in water.
Explanation:
An oil tanker spills a large amount of oil near the ocean shoreline. Which application of chemistry would best solve this problem?
What is a base?
A. A substance that contributes chloride ions to the solution
B. A substance that increases the concentration of oxygen in
solution
C. A substance that increases the concentration of OH ions in
solution
D
O D. A substance that increases the concentration of H+ ions when
dissolved
de semana
Answer:
The subsrance that increases OH ion concentration.
Explanation:
What volume of air at 25°C and 1.00 atm can he stored in a 10.0 L high-pressure air tank if compressed to 25°C and 175 atm? please show your work!
Answer:
0.057 L
Explanation:
Data obtained from the question include:
Initial temperature (T1) = 25°C
Initial pressure (P1) = 1 atm
Initial volume (V1) = 10 L
Final temperature (T2) = 25°C
Final pressure = 175 atm
Final volume =.?
From the data obtained from the question, we can see that the temperature is constant. Therefore, we shall apply the Boyle's law equation to determine the new volume of air. This is illustrated below:
P1V1 = P2V2
1 x 10 = 175 x V2
Divide both side by 175
V2 = 10/175
V2 = 0.057 L
Therefore, the volume of air which can be stored when the tank is compressed is 0.057 L
Calculate the molar mass of carbon tetrafluoride (CF4) in grams per mole, rounding to proper significant figures, if mc= 12.01 u and mF = 19.00 u.
Answer:
molar mass of carbon tetrafluoride (CF4) is
(12.01 × 1 ) + ( 4 × 19.00)
= 12.01 + 76
= 88.01u
= 88u
Hope this helps
Phosphorus has three electrons in its 3p sublevel and sulfur has four.
Phosphorus should have the lower ionization energy but it does not,
sulfur does. What does this provide evidence for?
A. Aufbau's principle
B. Conservation of energy
C. Hund' rule
D. None of these
Reset Selection
Answer:
The correct answer is C. Hund's rule.
Hund's rule states that for atoms in their ground state, electrons will occupy orbitals of the same energy level one by one before pairing up. This means that when filling the 3p sublevel, phosphorus should have one electron in each of the three 3p orbitals before any of them start pairing up.
However, in reality, sulfur has a lower ionization energy than phosphorus. This means that it is easier to remove an electron from sulfur than from phosphorus. This contradicts the expectation based on Hund's rule.
Therefore, the fact that sulfur has a lower ionization energy than phosphorus provides evidence that Hund's rule is not the only factor governing the electron configuration and ionization energies of elements. Other factors, such as electron-electron repulsion and the stability of half-filled or filled subshells, also play a role.
What are the units of molality? A. mol/kg B. g/mol C. mol/L D. kg/mol
Answer:
A. mol/kg
Explanation:
hope it helps .
How many grams of KCl will dissolve in 100g H2O at 40°C?
Answer:
5 grams
Explanation:
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
0.00325136 - 1.76527 =
Answer:
-1.76201864
Explanation:
0.00325136 - 1.76527 = 1.76201864
The concept of significant figures are mainly used by scientist and engineer to know the significance of digits in a measurement. Therefore, -1.76201 is the value on applying mathematical operation.
What is significant figures?Significant figures are the figures that indicate the degree of accuracy of a value. It tells about the precision of a value. It gives an idea about the digits that are necessary to indicate the experimental value.
Rules for counting significant figures are:
Number between 1 to 9 is always significant
Zeroes after a number has got no significance
Zeroes before a number has got no significance
Zeroes between number has got significance
0.00325136 - 1.76527
= -1.76201
Therefore, -1.76201 is the value on applying mathematical operation.
To learn more about Significant figures, here:
https://brainly.com/question/12656148?
#SPJ2
1. Convert 0.00006125 to scientific notation
Answer:
6.125 × 10^-5
Explanation:
You have to move the decimal place 5 times to the right. Remember in scientific notation the first number, (the number that comes before the 10) has to be between 1.0 and 9.99...
Write the equilibrium expression for the following reaction. Based upon the value of K, would you expect more or less product to be in the equilibrium mixture? Why?
Answer:
1. K = [CaCO3] [H2]⁴/ [CaO] [CH4] [H2O]²
2. More products are obtained at equilibrium since the equilibrium constant is very large.
Explanation:
1. Determination of the expression for the equilibrium constant, K.
The equilibrium constant, K for a given reaction is simply the ratio of concentration of the products raised to their coefficient to the concentration of the reactants raised to the coefficient.
The balanced equation for the reaction is given below:
CaO(s) + CH4(g) + 2H2O(g) —> CaCO3(s) + 4H2(g)
Therefore, the equilibrium constant, K for the above equation is:
K = [CaCO3] [H2]⁴/ [CaO] [CH4] [H2O]²
2. From the question given, the equilibrium constant is 2344.
Since the equilibrium constant is very large, it therefore means that more product are obtained at equilibrium.
A sample of liquid mercury is heated from 20°C to 40°C. Which measurement of the sample will increase during this process? volume, density, mass
its volume this is the answer because the mercury will turn into gas. gas has more volume because it takes up more space as it spreads.
Answer: It’s Volume
Explanation:
The diagram below shows the different phase transitions that occur in matter. Three bars are shown labeled Solid, Liquid, and Gas. They are connected by arrows labeled 1 to 6. Arrow 1 points from liquid to gas; arrow 2 from solid to liquid, arrow 3 from solid to gas, arrow 4 from gas to liquid, arrow 5 from liquid to solid, and arrow 6 from gas to solid. Which statement best describes the process that arrow 1 represents? Molecules are speeding up as boiling occurs. Molecules are slowing to a stop while freezing. Molecules are slowing down during condensation. Molecules are vibrating in stationary positions.
Answer:
Molecules are speeding up as boiling occurs.
Explanation:
We have three states of matter;solid liquid and gas. Substances are found in these different states of matter according to the degree of energy and velocity of its particles. Highly energetic particles moving at high velocities are found in the gaseous state. Less energetic particles moving at lesser velocities due to intermolecular forces are found in the liquid state while particles with the least degree of freedom are found in the solid state. Solid particles do not translate but can vibrate or rotate about a fixed position.
When a liquid boils, particles at the surface of the liquid acquire sufficient energy and escape the surface of the liquid. This is because, as energy is supplied in the form of heat during boiling, molecules acquire sufficient energy to speed up their molecular motion and escape the liquid surface as vapour.
Molecules are speeding up as boiling occurs is the statement that best describes the process of arrow 1.
Evaporation is a physical process in which matter transforms from a liquid state to a gaseous state. Generally this process occurs when matter is exposed to high amounts of energy.
When a material is exposed to energy, its particles begin to move and speed up until they break their bonds and are released in the form of gas.
Learn more in: https://brainly.com/question/9402776
Which type of reaction involves the release of energy into the surroundings? Options: endothermic reactions
exothermic reactions
Answer:
exothermic reaction
Explanation:
The definition of exothermic is:
describing a process that involves the release of energy into the surroundings by substances undergoing change.
Think of ex-othermic as energy exiting/ released and en-dothermic as energy entering.
Answer: it’s endothermic
Explanation:
What is the result of increasing the temperature of a gas? A. The number of molecules will increase. B. The molecules will slow down. C. The volume of the gas will decrease. D. The kinetic energy will increase
Answer:
D. The kinetic energy will increase
Explanation:
Answer:
Hello
I think the third one is correct.
Explanation:
Because when we increase the temperature of a gas the increasing give energy to gas molecules.
Good luck.
Initial temperature of metal =
С
Initial temperature of water =
°C
Final temperature of both =
Answer:
52.0 °C
Explanation:
how does temperature affect spontaneity?
a. if triangleH and triangleS have opposite signs, the temperature will determine spontaneity.
b. if the temperature is high enough, any reaction will become spontaneous
c. temperature will affect spontaneity only if triangleH and triangleS are both positive
d. if triangleH and triangleS have the same sign, the temperature will determine spontaneity
PLEASE HELP TYSM!!!
Answer:
The correct option is d.
d) If ΔH and ΔS have the same sign, the temperature will determine the spontaneity
Explanation:
Consider the table attached at the bottom which shows Spontaneity and the sign of Enthalpy and Entropy terms.
We can clearly see from the table how temperature effects the Spontaneity.
If the signs of ΔH and ΔS are opposite, the spontaneity doesn't depend on the temperature.
If the signs of ΔH and ΔS are same, then the temperature effects the Spontaneity. If both have negative signs, reaction is spontaneous at low temperature. If both have positive signs, reaction is spontaneous at high temperature.
Answer:
D.
Explanation:
A pE x
An element is:
A. A compound formed when different atoms react and form bonds with each other.
B. A pure chemical compound consisting of multiple atomic numbers.
C. A pure chemical substance consisting of one type of atom.
D. Two or more compounds that are mixed together but not chemically bonded.
Reset Selection
The empirical formula is:
A. the actual number of atoms of each element in a molecule.
B. representation of a compound that shows how its atoms are arranged.
C. All of these
D. the relative number of atoms of each element, using the lowest whole ratio.
Reset Selection
Answer:
option c the relative number of atoms of each element using the lowest ratio because empirical formula gives the simplest-whole number ration of each element
e.g. the empirical formula of benzeneC6H6 in CH
Explanation:
I HOPE IT WILL HELP YOU