Answer:
[tex]y = 5x-15[/tex]
Step-by-step explanation:
Parallel ⇒ So the slopes will definitely be equal
So,
Slope = m = 5
Now,
Point = (x,y) = (4,5)
So, x = 4, y = 5
Putting these in the slope intercept form to get b
[tex]y = mx +b \\[/tex]
5 = (5)(4) + b
5 = 20 + b
b = -20+5
b = -15
So, Putting m and b in the slope intercept form to get the required equation,
[tex]y = 5x-15[/tex]
Can advise on the solution?
Answer:
340
Step-by-step explanation:
If x is the amount of pages in the book we can write:
1/4x + 5 + 3/5(x - (1/4x + 5)) + 10 + 12 + 24 = x
1/4x + 51 + 3/5(3/4x - 5) = x
1/4x + 51 + 9/20x - 3 = x
7/10x + 48 = x
3/10x = 48
x = 160
Mr. Taylor filled out a bracket for the NCAA National Tournament. Based on his knowledge of college basketball, he has a 0.54 probability of guessing any one game correctly. (a) What is the probability Mr. Taylor will pick all 32 of the first round games correctly
Answer:
The probability is [tex]2.7327 \times 10^{-9}[/tex]
Step-by-step explanation:
The probability of guessing correctly, P = 0.54
Probability of not guessing correctly, q = 1 – P
q = 1 – 0.54 = 0.46
Number of trials, n = 32
Now calculate the probability that Mr. Taylor will pick 32 correctly in first round of the game.
Below is the calculation using binomial distribution.
[tex]Probability = \left ( _{k}^{n}\textrm{} \right )P^{k}(1-P)^{(n-k)} \\= \left ( _{32}^{32}\textrm{} \right )0.54^{32}(0.46)^{(32-32)} \\= 0.54^{32} \\= 2.7327 \times 10^{-9}[/tex]
Regression modeling is a statistical framework for developing a mathematical equation that describes how: a. One explanatory and one or more response variables are related b. Several explanatory and several response variables response are related c. One response and one or more explanatory variables are related d. All of these are correct
Answer:
c. One response and one or more explanatory variables are related.
Step-by-step explanation:
Regression shows the relationship between a given variable and its covariates, which can be one or more. The initial variable is the dependent or response variable selected to show its level of variation with respect to one or more independent or explanatory variables.
Therefore, regression modeling describes how one response is related to one or more explanatory variables.
All the angles in the diagram are measured to the nearest degree. Work out the upper bound and lower bound of angle x 59 degree 108 degree 81 degree X degree ??????
Answer: lower bound, x = 110.5°
upper bound, x = 113.5°
Step-by-step explanation:
There is no diagram but I am going to assume it is a quadrilateral since it has 4 angles. The sum of the angles of a quadrilateral is 360°.
Upper Lower
59° 58.5° ≤ a < 59.5
108° 107.5° ≤ b < 108.5°
81° 80.5° ≤ c < 81.5°
Total: 246.6° ≤ x < 249.5°
Subtract the lower and upper bound totals from 360° :
360.0 360.0
- 246.5 - 249.5
x = 1 1 3.5 1 1 0.5
↓ ↓
upper lower
bound bound
f(x) = (x + 2)(x + 2)
[tex]\displaystyle f(x) = (x + 2)(x + 2)[/tex]
[tex]\displaystyle f(x) = (x + 2)^2[/tex]
Answer:
[tex]f(x) = {(x + 2)}^{2} [/tex]
Step-by-step explanation:
[tex]f(x) = (x + 2)(x + 2) \\ f(x) = {(x + 2)}^{2} [/tex]
hope this helps you.
Brainliest to whoever gets this correct Which of the following is equal to the rational expression when x ≠ -3? x^2-9/x+3
Answer:
see below
Step-by-step explanation:
We presume you want to simplify ...
[tex]\dfrac{x^2-9}{x+3}=\dfrac{(x-3)(x+3)}{x+3}=\boxed{x-3}[/tex]
__
The numerator is the difference of squares, so is factored accordingly. One of those factors cancels the denominator.
Which part of Earth belongs to the geosphere?
air
plants
minerals
water
Help plz
Answer: Minerals
Step-by-step explanation:
The Mineral belongs to the geosphere option (3) Mineral is correct.
What is the geosphere?Different definitions of the geosphere have conflicting uses. It can be used to refer to the atmosphere, lithosphere, hydrosphere, and cryosphere as a whole. Different mass and/or energy flows can be exchanged between the various geosphere collectives.
We have a statement:
Which part of Earth belongs to the geosphere?
The options are:
airplantsmineralswaterAs we know, air belongs to the atmosphere.
Plants belong to the biosphere
Water belongs to the hydrosphere
Mineral belongs to the geosphere
The mineral is the part of the earth that belongs to the geosphere.
Thus, the Mineral belongs to the geosphere option (3) Mineral is correct.
Learn more about the geosphere here:
https://brainly.com/question/5137630
#SPJ5
Which fraction is equivalent to 2/-6? -2/6 2/6 -2/-6 6/2
please help and please show your work
Answer:
The volume of all 9 spheres is 301.6 [tex]in^3[/tex]
Step-by-step explanation:
Notice that three of the identical spheres fit perfectly along the 12 in side box, therefore we know that the diameter of each is 12 in/3 = 4 in.
Then the radius of each sphere must be 2 inches (half of the diameter). Now that we know the radius of each sphere, we use the formula for the volume of a sphere to find it:
[tex]V=\frac{4}{3} \pi R^3\\V=\frac{4}{3} \pi (2\,in)^3\\V=\frac{4}{3} \pi\, 8\,\,in^3\\V=\frac{32}{3} \pi\,\,in^3[/tex]
Now, the total volume of all nine spheres is the product of 9 times the volume we just found:
[tex]V_{all \,9}=9\,*\frac{32}{3} \pi\,\,in^3\\V_{all \,9}=96 \pi\,\,in^3\\V_{all \,9}\approx \,301.6\,\,in^3[/tex]
A roller coaster car is going over the top of a 13-mm-radius circular rise. At the top of the hill, the passengers "feel light," with an apparent weight only 50 %% of their true weight. How fast is the coaster moving?
Answer:
0.253 m/s
Step-by-step explanation:
radius r of the circular rise = 13 mm = 0.013 m
apparent weight loss = 50%
acceleration of the new weight = 0.5 x 9.81 = 4.905 m/s^2
centripetal acceleration = 9.81 - 4.905 = 4.905 m/s^2
centripetal acceleration = [tex]\frac{v^{2} }{r}[/tex]
where v is the acceleration at the rise and r is the radius of the rise
centripetal force = [tex]\frac{v^{2} }{r}[/tex] = [tex]\frac{v^{2} }{0.013}[/tex]
4.905 = [tex]\frac{v^{2} }{0.013}[/tex]
[tex]v^{2}[/tex] = 0.063765
v = [tex]\sqrt{0.063765}[/tex] = 0.253 m/s
Write an equation for a polynomial function that has the given roots
-2. 3i , and 5
Answer:
x^4 - 3x^3 - x^2 - 27x - 90 = 0.
Step-by-step explanation:
If 3i is one root then another is -3i.
In factor form we have:
(x + 2)(x - 5)(x - 3i)(x + 3i) = 0
(x^2 - 3x - 10)(x^2 -9i^2) = 0
(x^2 - 3x - 10)(x^2 + 9) = 0
x^4 + 9x^2 - 3x^3 - 27x - 10x^2 - 90 = 0
x^4 - 3x^3 - x^2 - 27x - 90 = 0.
Once a fire is reported to a fire insurance company, the company makes an initial estimate, X, of the amount it will pay to the claimant for the fire loss. When the claim is finally settled, the company pays an amount, Y, to the claimant. The comapny has determined that X and Y have the joint density functionf(x,y) = Given that the initial claim estiamted by the comapny is 2, determine the probability that the final settlement amount is between 1 and 3.
Answer:
The probability that the final settlement amount is between 1 and 3 given that the initial claim is 2 = (2/9) = 0.2222
Step-by-step explanation:
The complete question is presented in the attached image to this solution
The joint probability distribution is given as
f(x, y) = {2/[x²(x - 1)} × y^-[(2x-1)/(x-1)] for x>1 And y>1
Given that the initial claim estiamted by the comapny is 2, determine the probability that the final settlement amount is between 1 and 3.
That is, x = 2, and y ranges from 1 to 3
Inserting x = 2 into the expression, we obtain
f(y) = (1/2) × y⁻³ = (y⁻³/2)
The required probability would then be
P(1 < y ≤ 3) = ∫³₁ f(y) dy
= ∫³₁ (y⁻³/2) dy
= [y⁻²/-4]³₁
= [3⁻²/-4] - [1⁻²/-4]
= (-1/36) - (-1/4)
= (1/4) - (1/36)
= (8/36)
= (2/9) = 0.2222
Hope this Helps!!!
Which foundation drawing matches this orthographic drawing ?
The correct answer is A
Explanation:
An orthographic drawing shows a three-dimensional figure from different perspectives or sides. Indeed, the orthographic drawing in the question shows how the object looks if you see this the front, side, and top of this. This implies the foundation drawing needs to match the figures of the orthographic drawing.
According to this, the correct figure is A because this is the only one that has a rectangle shape, and due to this, if you look at this from any different sides you will always see a rectangle. For example, the top view shows a rectangle of approximately 2x3 squares, and this view only fits with option A because B and C are not complete rectangles and therefore their top view is not a rectangle.
To the nearest tenth, which is the perimeter of ABC. Geometry
Answer:
23.6
Step-by-step explanation:
Finding AC:
Cos 61 = [tex]\frac{adjacent}{hypotenuse}[/tex]
0.48 × 10 = Adjacent
AC = 4.8
Now, CB:
Cos 29 = [tex]\frac{adjacent}{hypotenuse}[/tex]
0.87 × 10 = CB
CB = 8.8
The perimeter:
=> 10+4.8+8.8
=> 23.6
Answer:
23.6
Step-by-step explanation:
the figure below shows a parallelogram ABCD. Side AB is parallel to side DC and side AD is parallel to side BC
A student wrote the following sentences to prove that the two pairs of parallel opposite sides of parallelogram ABCD are congruent:
For triangles ABD and CBD, alternate interior angles ABD and CBD are congruent because AB and DC are parallel lines. Alternate interior angles ADB and CBD are congruent because AD and BC are parallel lines. DB is congruent to DB by ______. The triangles ABD and CDB are congruent by ASA postulate. As corresponding parts of congruent triangles are congruent, AB is congruent to DC and AD is congruent to BC by CPCTC.
Which phrase best completes the student's proof?
a. associative property
b. reflexive property
c. substation property
d. transitive property
Answer: b) reflexive property
Step-by-step explanation:
When you are stating that a line is congruent to itself, you are using the Reflexive Property.
a) Associative Property: a + (b + c) = (a + b) + c
b) Reflexive Property: AB = AB
c) Substation Property: not a real property - does not exist
d) Transitive Property: If a = b and b = c, then a = c
Brand name producers of aspirin claim that one advantage of their aspirin over generic aspirin is that brand name aspirin is much more consistent in the amount of active ingredient used. This in turn means that users can expect the same results each time they use the brand name aspirin, while the effects of the generic aspirin can be a lot more variable. A random sample of 200 brand name aspirin tablets had a mean and standard deviation of active ingredient of 325.01 and 10.12 mg. A second independent sample of 180 generic aspirin tablets was measured for the amount of active ingredient, and the mean standard deviation were 323.47 and 11.43 mg. Given that the amount of active ingredient is normally distributed for both the brand name and the generic aspirin, do these data support the brand name producers claim? Let alpha = 0.025.
Answer:
Step-by-step explanation:
The claim here is that the brand name aspirin is more consistent in the amount of active ingredient used than the generic aspirin.
This is a test of 2 independent groups. The population standard deviations are not known. Let μ1 be the mean amount of active ingredients in brand name aspirin and μ2 be the mean amount of active ingredients in generic name aspirin
The random variable is μ1 - μ2 = difference in the mean amount of active ingredients between the brand name and generic aspirin
We would set up the hypothesis.
The null hypothesis is
H0 : μ1 ≥ μ2 H0 : μ1 - μ2 ≥ 0
The alternative hypothesis is
H1 : μ1 < μ2 H1 : μ1 - μ2 < 0
This is a left tailed test
Since sample standard deviation is known, we would determine the test statistic by using the t test. The formula is
(x1 - x2)/√(s1²/n1 + s2²/n2)
From the information given,
x1 = 325.01
x2 = 323.47
s1 = 10.12
s2 = 11.43
n1 = 200
n2 = 180
t = (325.01 - 323.47)/√(10.12²/200 + 11.43²/180)
t = 1.24
1.237877
The formula for determining the degree of freedom is
df = [s1²/n1 + s2²/n2]²/(1/n1 - 1)(s1²/n1)² + (1/n2 - 1)(s2²/n2)²
df = [10.12²/200 + 11.43²/180]²/[(1/200 - 1)(10.12²/200)² + (1/180 - 1)(11.43²/180)²] = 1.53233946713/0.00537245359
df = 285
We would determine the probability value from the t test calculator. It becomes
p value = 0.108
Since alpha, 0.025 < than the p value, 0.108, then we would fail to reject the null hypothesis. Therefore, at 2.5% level of significance, these data support the brand name producers claim
Please answer this correctly
Answer:
33.3%
Step-by-step explanation:
The numbers greater than 6 from the spinner are 7 and 8.
2 numbers out of total 6 numbers.
2/6 = 1/3
= 0.333
= 33.3%
A sanitation supervisor is interested in testing to see if the mean amount of garbage per bin is different from 50. In a random sample of 36 bins, the sample mean amount was 48.99 pounds and the sample standard deviation was 3.7 pounds. Conduct the appropriate hypothesis test using a 0.01 level of significance.
a) What is the test statistic? Give your answer to four decimal places.
b) What is the P-value for the test? Give your answer to four decimal places.
Answer:
Step-by-step explanation:
Claim: if the mean amount of garbage per bin is different from 50.
Null hypothesis: u=50
Alternative hypothesis : u =/ 50
Using the z score formular for a one sample z test - z = (x - u ) / (sd/√n)
Where x = 48.99, u = 50 sd =3.7 and n = 36
z = 48.99 - 50 / (3.7/√36)
z = -1.01 / (3.7/6)
z = -1.01/0.6167
z = -1.6377
To find the p value at a 0.01 level of significant from the -1.6377 z score for a two tailed test the p value using the p value calculator is 0.1016. The result is not significant at 0.01 level of significant thus we will fail to reject the null and conclude that the mean amount of garbage per bin is 50.
A manufacturer of chocolate chips would like to know whether its bag filling machine works correctly at the 442 gram setting. It is believed that the machine is underfilling the bags. A 44 bag sample had a mean of 438 grams. Assume the population variance is known to be 576. A level of significance of 0.1 will be used. Find the P-value of the test statistic. You may write the P-value as a range using interval notation, or as a decimal value rounded to four decimal places.
Answer:
p value is 0.1343
Step-by-step explanation:
Null: u>= 442
Alternative: u < 442
Using the formula for z score:
(x - u)/sd/√n
Where x is 438, u = 442 sd can be determined from the variance = √variance =√576 = 24 and n = 44
z score = 438-442 / (24/√44)
z score = -4/(24/6.6332)
z = -4/3.6182
z =-1.1055
Now let's find the p value at 0.1 significance level using a z score of -1.1055, using a p value calculator, p value is 0.1343 which greatest than 0.1 meaning the day is not sufficient enough to conclude that the machine is underfilling the bags.
Any help would be great
Answer:
V = 137.2
Step-by-step explanation:
We are given the volume equation. Simply plug in your r into the equation and calculate and you should get 137.189 as your answer.
Question
The cost for materials to resurface 1 meter of road is $750. What is the cost of materials to resurface 0.25
kilometer of a road? (1 kilometer = 1,000 meters).
$187.50
$1,875.00
$18,750.00
$187,500.00
Answer:
Option D
Step-by-step explanation:
Cost for the materials to resurface 1 meter of the road is $750.
∵ 1 kilometer = 1000 meter
∴ 0.25 kilometer = 0.25 × 1000
= 250 meters
∵ Cost to resurface 1 meter of road = $750
∴ Cost to resurface 250 meter of road = 750 × 250
= 187,500
The cost of materials to resurface 0.25 kilometer of a road is $187,500.
Option D is the answer.
how many nickels equal $18.45? (show your work)
Answer:
369
Step-by-step explanation:
One nickel = 0.05
0.05x=18.45
x=369
If P = {positive factors of 6}, how many subsets can be obtained from set P?
Step-by-step explanation:
1,2,3,4,5,6 is a set of 6 elements; therefore it has 2⁶=64 subsets
Jamie is investing $47,000 in an account paying 9.26% interest compounded continuously. What will Jamie's account balance be in 17 years?
9514 1404 393
Answer:
$226,863.29
Step-by-step explanation:
The amount is given by ...
A = Pe^(rt)
where principal P is invested at annual rate r for t years.
A = $47,000×e^(0.0926×17) ≈ $226,863.29
Answer:
the answer is $226,863.29
Rearrange the following steps in the correct order to locate the last occurrence of the smallest element in a finite list of integers, where the integers in the list are not necessarily distinct.
a. return location
b. min ≔a1 and location ≔1
c. min ≔ai and location≔i
d. procedure last smallest(a1,a2,...,an: integers)
e. If min >= ai then
Answer:
The rearranged steps is as follows:
d. procedure last smallest(a1,a2,...,an: integers)
b. min ≔a1 and location ≔1
e. If min >= ai then
c. min ≔ai and location≔i
a. return location
Step-by-step explanation:
The proper steps to perform the task in the question above is dbeca
Here, the procedure (or function) was defined along with necessary parameters
d. procedure last smallest(a1,a2,...,an: integers)
The smallest number is initialized to the first number on the list and its location is initialized to 1
b. min ≔a1 and location ≔1
The next line is an if conditional statement that checks if the current smallest number is greater than a particular number
e. If min >= ai then
If the above condition is true, the smallest value is assigned to variable min; it's location is also assigned to variable location
c. min ≔ai and location≔i
The last step returns the location of the smallest number
a. return location
The valve was tested on 270 engines and the mean pressure was 6.6 lbs/square inch. Assume the variance is known to be 0.49. If the valve was designed to produce a mean pressure of 6.5 lbs/square inch, is there sufficient evidence at the 0.1 level that the valve does not perform to the specifications
Answer:
[tex]z=\frac{6.6-6.5}{\frac{0.7}{\sqrt{270}}}=2.347[/tex]
The p value for this case would be given by"
[tex]p_v =2*P(z>2.347)=0.0189[/tex]
For this case since the p value is higher than the significance level we don't have enough evidence to conclude that the true mean is significantly different from 6.5 lbs/square inch at 10% of significance. So then there is not enough evidence to conclude that the valve does not perform to the specifications
Step-by-step explanation:
Information given
[tex]\bar X=6.6[/tex] represent the sample mean
[tex]s=\sqrt{0.49}= 0.7[/tex] represent the population deviation
[tex]n=270[/tex] sample size
[tex]\mu_o =6.5[/tex] represent the value that we want to test
[tex]\alpha=0.1[/tex] represent the significance level
z would represent the statistic
[tex]p_v[/tex] represent the p value for the test
Hypothesis to verify
We want to verify if the true mean for this case is equal to 6.5 lbs/square inch or not , the system of hypothesis would be:
Null hypothesis:[tex]\mu= 6.5[/tex]
Alternative hypothesis:[tex]\mu \neq 6.5[/tex]
The statistic for this case is given by:
[tex]t=\frac{\bar X-\mu_o}{\frac{s}{\sqrt{n}}}[/tex] (1)
And replacing we got:
[tex]z=\frac{6.6-6.5}{\frac{0.7}{\sqrt{270}}}=2.347[/tex]
The p value for this case would be given by"
[tex]p_v =2*P(z>2.347)=0.0189[/tex]
For this case since the p value is higher than the significance level we don't have enough evidence to conclude that the true mean is significantly different from 6.5 lbs/square inch at 10% of significance. So then there is not enough evidence to conclude that the valve does not perform to the specifications
All math teachers are smart. Ms. Smith is your math teacher, so she is smart. What type of reasoning is this? inductive or deductive
Answer:
I believe it is Inductive Reasoning.
Step-by-step explanation:
Inductive Reasoning is a type of logical thinking that involves forming generalizations based on specific incidents you've experienced, observations you've made, or facts you know to be true or false.
Deductive Reasoning is a basic form of valid reasoning.
What is the area of a shape with points a 5 -8 b 11, -8 c 11,0 d 6,-3 e 4,-3
Answer:
Area of the given figure is 51.5 square units.
Step-by-step explanation:
Area of rectangle OCBH = Length × width
= 11 × 8
= 88 square units
Area of trapezoid OGEF = [tex]\frac{1}{2}(b_1+b_2)\times h[/tex]
= [tex]\frac{1}{2}(\text{GE+OF)}\times (\text{OG})[/tex]
= [tex]\frac{1}{2}(3+6)\times 4[/tex]
= 18 units²
Area of trapezoid GCDE = [tex]\frac{1}{2}(\text{GC+DE)}\times (\text{GE})[/tex]
= [tex]\frac{1}{2}(7+2)\times 3[/tex]
= 13.5 units²
Area of triangle AFH = [tex]\frac{1}{2}(\text{Base})\times (\text{Height})[/tex]
= [tex]\frac{1}{2}(5)(2)[/tex]
= 5 units²
Area of polygon ABCDEF = Area of rectangle CBHO - (Area of trapezoid OGEF + Area of trapezoid GCDE + Area of triangle AFH)
= 88 - (18 + 13.5 + 5)
= 88 - 36.5
= 51.5 units²
Therefore, area of the given polygon is 51.5 units²
What is the product of the expressions? Assume y does not equal 0.
Answer:
The correct answer would be option 4
12x+20
5y3
Hope that helps.Thank you!!!
Google I would like to purchase 10 bags of chicken wings the store is selling three bags for $51.00 what is the cost of 10 bags of chicken wings
a. 61.00
b. 71.00
c. 170.00
d. 130.00
Answer:
A 61.00
Step-by-step explanation:
51 Added to 10 Equals 61.00 which is the Cost of 10 Bags of chicken Wings. Your Welcome.