A radioactive atom will spontaneously release radiation in the shape of energy rather than particles in order to transition into a more steady state.
Why is something radioactive?Radioactivity, as its name suggests, seems to be the act of generating radiation without any external cause. This is carried out by an unstable atomic nucleus that "wants" to abandon certain power in order to change to a more stable form.
Are people radioactive at all?Absolutely, since humans consume radioactive materials from the environment through food, drink, and air, our bodies are inherently radioactive. Our bodies take these substances in and store them in our bones, tissues, and organs. We also breathe them in and consume them.
To know more about radioactive visit:
https://brainly.com/question/1770619
#SPJ1
how many cats are in the word
Answer: more than 70,00 and most of that population is living on the streets
What piece of apparatus could be used to measure the volume of gas produced in a reaction
1)beaker
2)gas syringe
3) top pan balance
Answer: 2)gas syringe
Explanation:
the volume of a gas is usually measured with a gas syringe (or sometimes with an upside-down measuring cylinder)
Answer:
top pan balance
Explanation:
When a balloon containing 635 mL of air is taken from sea level (at standard pressure) to a higher altitude, the balloon expands to 829 mL. What is the air pressure at this new altitude (in atm)?
Answer:
0.766atm
Explanation:
Boyles law
P1V1=P2V2
1×635=P2×829
P2=635/829
P2=0.766atm
what is the definition of isomerism
Answer:
Isomerism is the phenomenon in which more than one compounds have the same chemical formula but different chemical structures. Chemical compounds that have identical chemical formulae but differ in properties and the arrangement of atoms in the molecule are called isomers. Therefore, the compounds that exhibit isomerism are known as isomers.
The word “isomer” is derived from the Greek words “isos” and “meros”, which mean “equal parts”. This term was coined by the Swedish chemist Jacob Berzelius in the year 1830.
Explanation:
If it takes 720. mL of 0.00125 M Mg(OH)2 to neutralize 425 mL of an HCI
solution, what is the concentration of the HCI? Mg(OH)2 + HCl →MgCl2
+ H20
Answer:
0.004235 M
Explanation:
The neutralization reaction of this question is given as follows:
Mg(OH)2 + 2HCl → MgCl2 + 2H2O
Using the formula below:
CaVa/CbVb = na/nb
Where;
Ca = concentration of acid (M)
Cb = concentration of base (M)
Va = volume of acid (mL)
Vb = volume of base (mL)
na = number of moles of acid = 2
nb = number of moles of base = 1
From the information provided in this question;
Ca = ?
Cb = 0.00125 M
Va = 425 mL
Vb = 720 mL
na (HCl) = 2
nb = (Mg(OH)2) = 1
Using the formula; CaVa/CbVb = na/nb
Ca × 425/0.00125 × 720 = 2/1
425Ca/0.9 = 2
472.2Ca = 2
Ca = 2/472.2
Ca = 0.004235 M
Questions
Determine the primary and secondary valencies of the following complexes and calculate their spin only magnetic
moment.
iii. [Cu(OH2)6]504
i. K[TI(CN).]
ii. [V(NH3)4Br2]
iv. K3 [Cr(CN)6]
Answer:
yes
Explanation:
yes
How many neutrons are in an atom of argon–40?
Answer:
22 neutrons
Explanation:
If so please sorry
help ! thank u / ill give brainlist !
Give two examples of energy transformations that occur throughout the journey to or on the planet.
Answer:
Our bodies convert chemical energy in our food into mechanical energy for us to move.
An electric fan transforms electrical energy into kinetic energy
Reword it tho
Hope this helps!!
What are the characteristics of acids and bases, and some examples of each?
Answer:
Acids taste sour while bases taste bitter. An acid reacts with metals to produce bubbles of hydrogen gas while a base feels slimy to the touch. Acids turn blue litmus paper red while bases turn red litmus paper blue.
If 1000 molecules enter the first-order reaction and 500 of them disintegrate in 1 s, then how many molecules disintegrate in 2 s?
Answer:
250 molecules
Explanation:
The number of molecules at the end of 1s are half the initial number of molecules.So, we can see that 1s is basically the half live.
For first order reactions t1/2=(ln2)/k
k=(ln2)/t1/2
k =(ln2)/1s
k =ln 2 /s
Because we know k ,we can use the integrated rate laws.
For 1st order:
ln[A]=ln[A]initial -kt
[A]= ?
[A]initial=1000
k=ln2
t=2s
ln[A]=ln[1000]-[ln 2 x 2]
ln[A]~5.521
[A]=e^(5.521)
=250 molecules
Hope it helps:)
what is a saturated organic compound and unsaturated organic compound?
Answer:
Saturated organic compound has only single bonds between carbon atoms. An important class of saturated compounds are the alkanes. Many saturated compounds have functional groups, e.g., alcohols.
Unsaturated organic compound have double or triple covalent bonds between adjacent carbon atoms. The term "unsaturated" means more hydrogen atoms may be added to the hydrocarbon to make it saturated (i.e. consisting all single bonds).
In the reaction below does water acts as the acid or as the base?
H2S + H20 - HS1- + H30+ *
O a. Neither, water is neutral
O b. Acid
O C. Base
Answer:
C. Base.
Explanation:
Hello there!
In this case, according to the given information, it turns out convenient for us to realize that the concept acid and base we should use here is based off the Bronsted-Lowry one, which says that an acid is a hydrogen donor. In such a way, since water accepts one H ion as it goes to H3O⁺, we infer it is C. Base and the H2S the acid.
Also, we can tell HS⁻ is the conjugate base and H3O⁺ the conjugate acid.
Regards!
What is the mass of a gas with a molar mass of 44.01 g/mol at a temperature of 298 K, a pressure of 0.957 atm and a volume of 1.30L?
Answer:
2.24 g
Explanation:
First we use the PV=nRT formula to calculate the number of moles of the gas:
0.957 atm * 1.30 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 298 Kn = 0.0509 molThen we can use the given molar mass to calculate the mass:
Molar Mass = Mass / number of moles44.01 g/mol = Mass / 0.0509 molMass = 2.24 gAstronauts must be protected from extreme heat while
reentering the Earth's atmosphere. Scientists can use the
engineering design process to help make reentry safer.
You have defined the problem as a need for heat shields to be stronger. What
should be your next step in using the engineering design process to solve the
problem?
O A. Communicate your solution to your team members.
O B. Update your initial design for the heat shield.
O C. Identify the criteria and constraints of the project.
O D. Build a prototype of a possible new type of heat shield.
The next engineering step to be taken is to update your initial design for the heat shield.
What is a heat sheild?The term heat sheild refers to a device that can be used to shield an from astronaut extreme heat especially as they re-enter the earth's atmosphere.
After you have identified the problem, the next engineering step to be taken is to update your initial design for the heat shield.
Learn more about heat sheild:https://brainly.com/question/21504467?
#SPJ2
If g of chlorine gas occupies a volume of mL at a particular temperature and pressure, what volume will g of chlorine gas occupy under the same conditions
The complete question is as follows: If 1.04 g of chlorine gas occupies a volume of 872 mL at a particular temperature and pressure, what volume will 2.08 g of chlorine gas occupy under the same conditions ?
Answer: A volume of 1744 L will 2.08 g of chlorine gas occupy under the same conditions.
Explanation:
Given: [tex]Mass_1[/tex] = 1.04 g, [tex]V_{1}[/tex] = 872 mL
[tex]Mass_2[/tex] = 2.08 g, [tex]V_{2}[/tex] = ?
As molar mass of chlorine is 35.5 g/mol.
Number of moles is the mass of a substance divided by its molar mass.
Hence, moles of chlorine present in 1.04 g chlorine gas is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{1.04 g}{35.5 g/mol}\\= 0.029 mol[/tex]
Also, moles of chlorine present in 2.08 g chlorine gas is calculated as follows.
[tex]Moles = \frac{2.08 g}{35.5 g/mol}\\= 0.058 mol[/tex]
Formula used to calculate the volume occupied by 2.08 g of chlorine gas is as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{V_{1}}{n_{1}} = \frac{V_{2}}{n_{2}}\\\frac{872 L}{0.029 mol} = \frac{V_{2}}{0.058 mol}\\V_{2} = 1744 L[/tex]
Thus, we can conclude that a volume of 1744 L will 2.08 g of chlorine gas occupy under the same conditions.
What volume is occupied by 0.108 mol of helium gas at a pressure of 0.96 atm and a
temperature of 315 K?
Express your answer using two significant figures.
Answer:
[tex]V=2.9L[/tex]
Explanation:
Hello there!
In this case, by considering the given information in this problem, it is possible for us to infer that this problem is solved by using the ideal gas equation:
[tex]PV=nRT[/tex]
Next, since we are given the moles, pressure and temperature, we proceed as follows:
[tex]V=\frac{nRT}{P}[/tex]
Then, we plug in the given data to obtain:
[tex]V=\frac{0.108mol*0.08206\frac{atm*L}{mol*K}*315K}{0.96atm}\\\\V=2.9L[/tex]
Best regards!
Which best explains the relationship between evaporation and temperature?
• A liquid evaporates slower at lower temperatures because the molecules are more spread apart and are not pushed
as easily from the liquid's surface.
O A liquid evaporates faster at lower temperatures becaus the attractions are decreased and more particles can
escape the surface of the liquid.
© A liquid evaporates slower at higher temperatures because the vapor pressure of the liquid is higher, SO fewer
molecules can escape the surface.
• A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome
attractions in the liquid.
Answer: D
Explanation:
liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Answer:
D. A liquid evaporates faster at higher temperatures because more particles have a higher speed and can overcome attractions in the liquid.
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
How many molecules of sodium fluoride (NaF) are found in 7.2 moles of sodium fluoride?
Answer:
well please answer me it's question too after you get it
Explanation:
i am also stucked in that question
No. of molecules of any substance is one mole
= Avogadro's Number = (6.022 x 10^23)
So, no. of molecules in 7.2 moles of sodium fluoride
= 7.2 × (6.022 x 10^23)
= 4.33584^24
Name the following alkene:
CH3CH = CHCH2CH3
A. 3-pentane
B. 2-pentene
C. 2-pentane
D. 3-pentene
Answer:
2-pentene
Explanation:
The name of the alkene is 2 pentene. The correct option is B, 2-pentene.
What is 2-pentene?Alkenes with the chemical formula [tex]C_5H_10[/tex] are known as pentene. Within its molecular structure, each has one double bond.
The given alkene [tex]CH_3CH = CHCH_2CH_3[/tex] is 2-pentene because the double bond is present in the second carbon and it's pentene because there are five carbons present.
Thus, the correct option is B. 2-pentene.
Learn more about 2-pentene
https://brainly.com/question/19593832
#SPJ2
How many grams of chlorine are required in order to consume 100g of sodium chloride?
Answer:
92.1 g
Explanation:
Answer: 92.1 grams
I hope this helped :3
Write the Ksp expression for the sparingly soluble compound cobalt(II) sulfide, CoS. If either the numerator or denominator is 1, please enter 1.
Answer:
[tex]Ksp=\frac{[Co^{2+}][S^{2-}]}{1}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out firstly necessary to write the chemical equation for this reaction as shown below:
[tex]CoS(s)\rightleftharpoons Co^{2+}(aq)+S^{2-}(aq)[/tex]
Thus, since solids are not included in equilibrium expressions, we can set this one up as follows:
[tex]Ksp=\frac{[Co^{2+}][S^{2-}]}{1}[/tex]
Regards!
what are factors that affecting the boiling point of liquid?
ch3cooh number of bonding pairs and lone pairs.
Answer:
whats the question?
Explanation:
The picture below shows a NASA image of the Oort cloud, a sphere of objects that are thought to surround Earth's solar system at a distance of up to one light-year from the Sun.
If the Oort cloud does exist, which of the following could explain why the objects in it may have formed this spherical shape?
A
They are held in orbits by the Sun's gravitational force.
B
They are held in Earth's solar system by Neptune's magnetic field.
C
They float freely in space because the Sun's gravitational force is too weak to hold them in orbit.
D
They are held in stationary positions around Earth's solar system by other stars in space.
The gravitational pull of the Sun keeps them in their orbits. The gravitational pull of the Sun and surrounding stars combined is most likely what gives the Oort cloud its spherical shape.
What does NASA's Oort Cloud mean?The Oort Cloud is a spherical layer of ice objects that is thought to be located between 2,000 and 100,000 astronomical units (AU) from our Sun, a star.
What makes it the Oort Cloud?The Oort cloud, so named after the Dutch astronomer Jan Oort who first confirmed its existence, is a collection of objects with a combined mass estimated to be 10-100 times that of Earth that are less than 100 km (60 miles) across and maybe trillions in number.
To know more about Oort cloud visit:-
https://brainly.com/question/23368033
#SPJ1
You dissolve 14 g of [tex]Mg(NO_{3} )_{2}[/tex] in water and dilute to 750 mL. What is the molarity of this solution?
Show your work
The compound AlP (aluminum phosphide) is a compound semiconductor having mixed ionic and covalent bonding. Calculate the fraction of bonding that is ionic.
Answer:
0.086
Explanation:
The formula for calculating the fraction of a covalent bond can be expressed as:
= exp (-0.25ΔE²)
[tex]= exp[-0.25(E_{Al}-E_{p})^2]---(1)[/tex]
from the equation above;
[tex]E_{Al}[/tex] = the electronegativity of aluminum
[tex]E_P[/tex] = electronegativity of phosphorus
Using the data from periodic table figures;
[tex]E_{Al}[/tex] = 1.5
[tex]E_P[/tex] = 2.1
∴
fraction of the covalent = exp[-0.25(1.5 - 2.1)²]
fraction of the covalent = exp(-0.09)
fraction of the covalent = 0.914
Now, the fraction of ionic bond will be = 1 - the fraction of covalent bond
= 1 - 0.914
∴
the fraction of bond that is ionic = 0.086
is a glow stick Endothermic or exothermic ?
Answer:
exothermic
Explanation:
Calculate the mass percent (m/m) of a solution prepared by dissolving 51.56 g of NaCl in 164.2 g of H2O. Express your answer to four significant figures. View Available Hint(s)
Answer:
"23.896%" is the right answer.
Explanation:
The given values are:
Mass of NaCl,
= 51.56 g
Mass of H₂O,
= 165.6 g
As we know,
⇒ Mass of solution = [tex]Mass \ of \ (NaCl+H_2O)[/tex]
= [tex]51.56+164.2[/tex]
= [tex]215.76 \ g[/tex]
hence,
⇒ [tex]Mass \ percent =\frac{Mass \ of \ NaCl}{Mass \ of \ solution}\times 100[/tex]
[tex]=\frac{51.56}{215.76}\times 100[/tex]
[tex]=23.896 \ percent[/tex]
sodium is an inactive metal why
Answer:
Inactive metals are inert metals that doesn’t react with most of the chemicals.They are highly resistant to oxidation and corrosion when exposed to moisture.
Explanation:
What is the mass in grams of 5.50 moles of Copper, Cu?
Answer:
349.503 g
https://www.convertunits.com/from/moles+Copper/to/grams
here is a link, you can convert moles of copper to grams here
The answer is 5.50 moles of Cu (Copper) has 349.503 grams mass .
What is a mole ?
A mole is defined as 6.02214076 × 10²³ atoms, molecules, ions, or other chemical units.
and the molar mass of a substance is defined as the mass of 1 mole of that substance, expressed in grams per mole.
It is equal to the mass of 6.022 × 10 23 atoms, molecules, or formula units of that substance.
1 mole of Cu has 63.546 grams of Cu
So 5.50 moles will have 5.50 * 63.546 grams
=349.503 grams
Therefore 5.50 moles of Cu (Copper) has 349.503 grams mass .
To know more about moles
https://brainly.in/question/148570
#SPJ2